PubMed Health⌕ Search

Biomedical subjects

M Fujitani

Publications and source records attributed to M Fujitani.

15 recordsLinked to original sources
PubMed2005

Temporary restorative resins using non-phthalate ester plasticizers.

OBJECTIVE: This study examined temporary restorative resins that use non-phthalate ester plasticizers. METHODS: Three non-phthalate plasticizers were tested: tri-ethyl citrate (TEC), tri-butyl citrate (TBC), and di-butyl sebacate (DBS). The experimental resins were compared with resins that use a phthalate ester plasticizer (di-butyl phthalate, DBP) and commercial products (Dura Seal, Plast Seal, and Fit Seal). For the experimental resins, the ratio of plasticizer to PMMA/MMA resin was varied from 30 to 60% (wt). The mechanical properties of the experimental resins were evaluated using a modified diametral compressive strength and the resistance to explorer insertion. RESULTS: The strengths of the experimental resins with plasticizer concentrations ranging from 40 to 50% (TEC, TBC, and DBP) or from 30 to 40% (DBS), by weight, were equivalent to the strengths of commercial temporary restorative resins. A similar tendency was seen for the resistance to explorer insertion. CONCLUSIONS: The results suggest that new temporary restorative resins can be prepared by choosing the appropriate proportions of resin monomer and non-phthalate ester plasticizer.

Citrates↗
PubMed2000

Assessment of decontamination methods as pretreatment of silanization of composite glass fillers.

In terms of mechanical properties and durability, the surface of glass fillers should be decontaminated in order to optimize the silanization process for the production of resin composites. The objective of this study was to evaluate the decontamination efficiency of 18 cleaning methods on glass fillers as pretreatment of silane coupling. X-ray photoelectron spectroscopy revealed that SiO(2) boiled with a 5% sodium peroxodisulfate aqueous solution for 15 min, followed by ultrasonic rinsing with acetone for 30 min was most effective among all the decontamination methods investigated. In addition, nano-indentation measurements on SiO(2) treated by the above-mentioned method revealed that the surface was not significantly weakened as compared to untreated SiO(2). The results of this study should lead to an improved filler-matrix coupling and thus contribute to the development of better wear and fatigue-resistant composites. Therefore, sodium peroxodisulfate is proposed as a presilanization filler decontamination step in the production process of resin composites.

Bisphenol A-Glycidyl Methacrylate↗
PubMed2000

Cynomolgus monkey liver aldehyde oxidase: extremely high oxidase activity and an attempt at purification.

Aldehyde oxidase (EC 1.2.3.1) in monkey (Macaca fascicularis) liver was characterized. Liver cytosol exhibited extremely high benzaldehyde and phthalazine oxidase activities based on aldehyde oxidase, compared with those of rabbits, rats, mice and guinea pigs. Monkey liver aldehyde oxidase showed broad substrate specificity distinct from that of the enzyme from other mammals. Purified aldehyde oxidase from monkey liver cytosol showed two major bands and two minor bands in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). These bands were also observed in Western blotting analysis using anti-rat aldehyde oxidase. The molecular mass of the enzyme was estimated to be 130-151 kDa by SDS-PAGE, and to be about 285 kDa by HPLC gel filtration. The results suggest that isoforms of aldehyde oxidase exist in monkey livers.

Aldehyde Oxidase↗
PubMed1999

Regional distribution of parkinsonism-preventing endogenous tetrahydroisoquinoline derivatives and an endogenous parkinsonism-preventing substance-synthesizing enzyme in monkey brain.

1,2,3,4-Tetrahydroisoquinoline (TIQ) and 1-benzyl-1,2,3,4-tetrahydroisoquinoline (1BnTIQ), which exist in the brain of several mammalian species, are parkinsonism-inducing substances, and 1-methyl-1,2,3,4-tetrahydroisoquinoline (1MeTIQ), which is enzymatically synthesized in rat brain, is a parkinsonism-preventing substance. In this study, we examined the regional distribution of contents of TIQ, 1MeTIQ, and 1BnTIQ, and activity of 1MeTIQ-synthesizing enzyme in monkey brain. The TIQ and 1BnTIQ contents in cerebrum and substantia nigra, and the 1MeTIQ contents in striatum and substantia nigra were higher than those in other brain regions, and 1MeTIQ-synthetic activity was high in cerebrum and thalamus. We speculate that 1MeTIQ-synthesizing enzyme may play an important role in idiopathic Parkinson's disease.

Animals↗
PubMed1999

Occlusal force distribution on the dental arch during various levels of clenching.

The purpose of this study was to explore the occlusal force distribution on the dental arch in the intercuspal position and to evaluate the relationship between the clenching strength and the occlusal force distribution. These variables were recorded using the Dental Prescale System in 16 healthy young adults. The number of tooth contacts, occlusal force and occlusal contact area increased linearly as clenching strength increased. The distribution of the occlusal force was greatest at the molar region followed by the premolar and anterior teeth region. The proportion of occlusal force (occlusal force at each region/total occlusal force) on molar regions increased as clenching strength increased. On the contrary, the proportion of occlusal force on the premolar and anterior teeth regions decreased as clenching strength increased. These findings suggest that control of occlusal force is important in diagnosis of the nature of occlusal contacts.

Adult↗
PubMed1992

Effect of acid etching on the dental pulp in adhesive composite restorations.

Pulpal response to marginal enamel etching or both enamel and dentine etching with 37% phosphoric acid for adhesive composite restorations was studied in the teeth of the Japanese monkey (Macaca fuscata). Dentine etching irritated the pulp and caused moderate to severe initial changes along the odontoblastic layer at 3 days. When no bacteria were present along the cavity walls, the subsequent pulpal reactions at 30 and 90 days decreased with time and large amounts of irritation dentine were formed. These inflammatory reactions were less than those caused by enamel etching only, or zinc oxide/eugenol cement. Significant correlation (P less than 0.01) was found between the intensity of the inflammatory reactions and the degree of bacterial infection. The pulpal irritation caused by acid etching of dentine for composite restorations is transitory only when the fillings have a good marginal seal and wall adaptation.

Acid Etching, Dental↗
PubMed1992

Studies on newly designed tooth surface treatments for adhesive composite restoration.

Recently, problems have occurred frequently such as cervical and exposed dentin surface lesions or root caries and subsequent hypersensitivity because of further increase of the elderly population. This study was projected to device a proper and simple treatment and materials for the adhesive composite restoration for such lesions. The 10-20Ca (10% citric acid containing 20% calcium chloride) solution was found to be a comparatively mild tooth surface conditioning agent and to be effective with a single application to both dentin and enamel. In addition, the use of the SA primer (3% N-methacryloyl 5-aminosalicylic acid in 80% ethanol) and the LVR (visible light-cured, 33% microfilled low viscous Bis-GMA resin) dramatically improved the adhesion and adaptability of the composite restoration in the saucer cavity at the cervical area.

Acid Etching, Dental↗
PubMedDate not supplied

Monkey pulpal response to adhesively luted indirect resin composite inlays.

Monkey pulpal responses to resin-bonded indirect resin composite inlays were histopathologically evaluated by placing them in either etched-enamel, total-etched, or adhesive-resin-lined cavities. Initial pulpal responses caused by re-exposure of the cut dentin surfaces and luting procedure subsided if a tight marginal seal was secured by final cementation of the inlay. The adhesive resin coating of freshly cut dentinal walls/floors seems to provide a new technique to protect the dentin and pulp in indirect restorations requiring temporary sealing.

Analysis of Variance↗
PubMedDate not supplied

Possible involvement of calpain in the growth of estrogen receptor positive breast cancer cells.

Calpain (Ca2(+)-activated neutral protease, EC 3.4.22.17) has been reported to hydrolyze the estrogen receptor (ER). However, there has been no report available regarding the role of calpain in the growth of breast cancer cells. To investigate the role of calpain in the growth of various breast cancer cell lines, we employed a synthetic peptide, calpeptin, which is a cell permeable specific inhibitor of calpain. Calpeptin inhibited the cell growth of ER positive breast cancer cells, such as MCF-7, T-47D, and ZR-75-1 in a dose dependent manner in the presence of E2. However, the growth of ER negative breast cancer cells, MDA-MB-231, was not inhibited by calpeptin. It is suggested that calpain plays an important role in the growth of ER positive breast cancer cells.

Animals↗
PubMedDate not supplied

Monkey pulpal responses to conventional and adhesive luting cements.

Monkey pulpal responses to metal inlays luted with a combination of an adhesive resin and luting composite and conventional dental cements were histopathologically evaluated. Initial pulpal responses caused by re-exposure of the cut dentin surfaces and luting procedure under hydraulic pressure subsided at 90 days after final cementation. There was no significant difference among pulpal reactions to conventional dental cements and a combination of an adhesive resin and luting composite. The adhesive resin coating of freshly cut dentinal walls/floors immediately after cavity preparation seems to provide protection for the dentin and pulp in indirect restorations requiring temporary sealing.

Analysis of Variance↗
PubMedDate not supplied

Short-term reaction of exposed monkey pulp beneath adhesive resins.

Monkey pulpal responses to four adhesive resin systems used as direct pulp capping agents were histopathologically evaluated at 3, 7, 14, 30, and 60 days after operation. No serious inflammatory reaction of the pulp, such as necrosis or abscess formation, was observed. Slight inflammatory cell infiltration was the main inflammatory reaction of the exposed pulp, and the exposed area became occluded with dentin bridging as the observation period increased. Healing of exposed dental pulp beneath adhesive resin capping slightly differed depending on the materials used.

Analysis of Variance↗