PubMed Health⌕ Search

Biomedical subjects

M G Cascone

Publications and source records attributed to M G Cascone.

10 recordsLinked to original sources

Morphological features of ovine embryonic lung fibroblasts cultured on different bioactive scaffolds.

Tissue regeneration with autologous cell transplantation is one of the most important goals in clinical research. In this field, the development of bioactive materials that provide microenvironments for cell-matrix interactions mimicking biological conditions is required. In recent years, many synthetic materials have been developed as scaffolds and many procedures for the surface modification of these materials have been applied using biological molecules. In this study, we analyzed the morphology and the molecule production by ovine embryonic lung fibroblasts cultured on three different sponge-like matrices based on poly(L-lactic acid) (PLLA): agarose/PLLA, crosslinked and uncrosslinked gelatin/PLLA. The matrices were produced by using an emulsion freeze-drying method leading to the formation of sponge-like materials with high porosity and with interconnection between the pores. In vitro MTT test demonstrated that transplanted cells were viable and metabolically active. Morphological analysis revealed that fibroblasts adhered to and penetrated the polymeric structures. Moreover, all the different matrices supported fibroblast production of proteoglycans, glycoproteins, and matrix molecules such as elastin, collagen I, and fibronectin. These data suggest that the tested bioactive scaffolds may support the growth and extracellular matrix molecule production of fibroblasts allowing in vitro connective tissue regeneration.

Animals↗

Bioartificial polymeric materials based on polysaccharides.

Bioartificial polymeric materials, based on blends of polysaccharides with synthetic polymers such as poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA), were prepared as films or hydrogels. The physico-chemical, mechanical, and biological properties of these materials were investigated by different techniques such as differential scanning calorimetry, dynamic mechanical thermal analysis, scanning electron microscopy, and in vitro release tests, with the aim of evaluating the miscibility of the polymer blends and to establish their potential applications. The results indicate that while dextran is perfectly miscible with PAA, dextran/PVA, chitosan/PVA, starch/PVA, and gellan/PVA blends behave mainly as two-phase systems, although interactions can occur between the components. Cross-linked starch/PVA films could be employed as dialysis membranes: they showed transport properties comparable to, and in some cases better than, those of currently used commercial membranes. Hydrogels based on dextran/PVA and chitosan/PVA blends could find applications as delivery systems. They appeared able to release physiological amounts of human growth hormone, offering the possibility to modulate the release of the drug by varying the content of the biological component.

Biocompatible Materials↗

Hydrogels based on chitosan and dextran as potential drug delivery systems.

The release of human growth hormone (GH) from bioartificial polymeric materials in the form of hydrogels, was measured in vitro for up to 3 weeks. Poly(vinyl-alcohol) (PVA) was blended, in different ratios, with two biological polymers, dextran and chitosan respectively. These blends were used to prepare hydrogels, using a freeze-thawing method. The hydrogels were loaded with GH, and their potential use as delivery systems was investigated. The release with time of PVA, in aqueous medium, was also monitored and evaluated. Scanning electron microscopy was used to investigate the structure of the hydrogels. The results obtained indicated that GH can be released from both dextran/PVA and chitosan/PVA hydrogels. The initial GH concentration used for sample loading affected the total quantity of GH released but not the pattern of release. The amount of GH released was affected by the content of the biological component. The percentage of PVA released was low but it was, however, related to the content of chitosan and dextran in the blends.

Journal Article↗

Effect of chitosan and dextran on the properties of poly(vinyl alcohol) hydrogels.

Hydrogels are three-dimensional polymeric networks very similar to biological tissues and potentially useful as drug delivery systems. Poly(vinyl alcohol)-based hydrogels containing different amounts of dextran or chitosan were prepared using the freezing-thawing method. Repeated freezing-thawing cycles of a poly(vinyl alcohol) (PVA) aqueous solution lead to the formation of crystallites which act as cross-linking sites, and a hydrogel with a high capacity to swell is obtained. The effects of the two different polysaccharides on the properties of the obtained materials were investigated by differential scanning calorimetry, dynamic mechanical analysis and scanning electron microscopy. In addition the release with time of poly(vinyl alcohol) in aqueous medium, was monitored and evaluated. On the basis of the obtained results it seems that the presence of dextran favors the crystallization process of PVA, allowing the formation of a more ordered and homogeneous structure. Instead, chitosan seems to perturb the formation of PVA crystallites leading to a material with a less regular structure.

Journal Article↗

Surface characterisation of collagen-based bioartificial polymeric materials.

An electron spectroscopy for Chemical Analysis (ESCA) characterization of films based on collagen-poly(vinylalcohol) blends, cross-linked by dehydrothermal treatment is reported. The semiquantitative analysis indicates a remarkable enrichment of collagen in the surface with respect to its initial percentage utilized to prepare the blends.

Animals↗

Blends of synthetic and natural polymers as drug delivery systems for growth hormone.

In order to overcome the biological deficiencies of synthetic polymers and to enhance the mechanical characteristics of natural polymers, two synthetic polymers, poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA) were blended, in different ratios, with two biological polymers, collagen (C) and hyaluronic acid (HA). These blends were used to prepare films, sponges and hydrogels which were loaded with growth hormone (GH) to investigate their potential use as drug delivery systems. The GH release was monitored in vitro using a specific enzyme-linked immunosorbent assay. The results show that GH can be released from HA/PAA sponges and from HA/PVA and C/PVA hydrogels. The initial GH concentration used for sample loading affected the total quantity of GH released but not the pattern of release. The rate and quantity of GH released was significantly dependent on the HA or C content of the polymers.

Acrylic Resins↗

Bioartificial materials based on collagen: 2. Mixtures of soluble collagen and poly(vinylalcohol) cross-linked with gaseous glutaraldehyde.

Thin films of both pure soluble collagen (CLG) and poly(vinylalcohol) (PVA) and mixtures of the two, ranging from 20-80% PVA composition were studied to test the effects of PVA content and of glutaraldehyde vapour cross-linking. Both the thermal and mechanical behavior and, in addition, proteolytic stability were clearly influenced by the ratio of CLG/PVA. The experimental results indicate that no thermodynamic compatibility occurs between the two homopolymers. However, there is evidence that strong interactions, probably due to hydrogen bond formation, occur between the biological and synthetic polymers. The interactions appear stronger in those films with a lower PVA content and which were not cross-linked. Both the thermal and biological stability are increased and there is an improvement of the mechanical properties. The mutual intermolecular influence appears to allow the attainment of a good mechanical compatibility between CLG and PVA.

Animals↗

Collagen-based new bioartificial polymeric materials.

Bioartificial polymeric materials, based on blends of biological and synthetic polymers, have been proposed as new materials for applications in the biomedical field. They should usefully combine the biocompatibility of the biological component with the physical and mechanical properties of the synthetic component. Blends of collagen with either poly(vinyl alcohol) or poly(acrylic acid) have been prepared by mixing aqueous solutions of the two polymers. Differential scanning calorimetry and dynamic mechanical thermal analysis has been carried out to investigate the miscibility properties of the polymers and the mechanical behaviour of the blends.

Acrylic Resins↗

Cell cultures in the biocompatibility study of synthetic materials.

In vitro cytotoxicity (Neutral Red uptake, Kenacid Blue and MTT) and cytocompatibility (cell adhesion and proliferation) tests were applied to the biocompatibility study of a series of poly(ester-ether-ester) block copolymers of potential interest as biomaterials. Our results indicate that the copolymer extracts after 72 hours incubation with a 3T3 mouse fibroblast cell line do not induce significant toxic effects. Furthermore, human umbilical vein endothelial cells seeded on thin copolymer films show a normal pattern of growth. We conclude that the in vitro tests used are a valid instrument to evaluate the potential toxic action of synthetic materials on different cell compartments and that the tested materials seem to be promising for future applications in the field of biomedical devices.

3T3 Cells↗

Osteoblast responses to collagen-PVA bioartificial polymers in vitro: the effects of cross-linking method and collagen content.

A range of 'bioartificial' collagen/poly(vinyl alcohol) blends have been produced, cast as films and cross-linked using either glutaraldehyde or a dehydrothermal treatment (DHT). Films were used as substrates for the culture of osteoblast-like cells. The attachment, adhesion and proliferative responses of these cells to the range of films were examined using proliferation assays, light, electron and confocal microscopy. There was an inverse relationship between collagen content of gluataraldehyde cross-linked films and the extent of cell proliferation on them. A cytotoxicity assay demonstrated no toxic effect related to increasing collagen content. The greatest differences in cell responses observed were associated with the choice of cross-linking method. Films cross-linked with glutaraldehyde showed variation related to collagen content in cell adhesion, proliferation and morphology. Such differences were not apparent with the DHT cross-linked films. Collagen/PVA 'bioartificial' films can be dehydrothermally cross-linked to increase biological stability and reduce water solubility. The method of cross-linking employed is the greater influence in determining osteoblast compatibility with these materials. The DHT cross-linking method is a preferable alternative to the use of glutaraldehyde. Collagen/PVA bioartificial films cross-linked by the DHT method have shown potential for biocompatibility with osteoblasts.

Biocompatible Materials↗