PubMed Health⌕ Search

Biomedical subjects

M Giersig

Publications and source records attributed to M Giersig.

10 recordsLinked to original sources
PubMed2006

Highly ordered MWNT-based matrixes: topography at the nanoscale conceived for tissue engineering.

A method based on the conventional lithographic technique combined with the layer-by-layer (LBL) assembly process is applied to the construction of free-standing micro- and nanostructured matrixes. The method enables controlled shaping and considerable chemical and mechanical stability of the self-assembled monolayers, allowing for high reproducibility in manufacturing. The matrixes are characterized by controlled geometry, surface topography, and chemical composition. The complete architecture is made up of successive layers of intercrossed carbon nanotubes that self-assemble into orderly structures. In particular, the present method aims to create architectures and topographies that mimic those occurring naturally (native tissue structures). In addition, nanoindentation and nanoscratch techniques were used to evaluate the mechanical properties of the carbon nanotube-based matrixes.

Extracellular Matrix↗
PubMed2005

Nanomechanical properties of silica-coated multiwall carbon nanotubes-poly(methyl methacrylate) composites.

The mechanical properties of polymer composites, reinforced with silica-coated multiwall carbon nanotubes (MWNTs), have been studied using the nanoindentation technique. The hardness and the Young's modulus have been found to increase strongly with the increasing content of these nanotubes in the polymer matrix. Similar experiments conducted on thin films containing MWNTs, but without a silica shell, revealed that the presence of these nanotubes does not affect the nanomechanical properties of the composites. While carbon nanotubes (CNTs) have a very high tensile strength due to the nanotube stiffness, composites fabricated with CNTs may exhibit inferior toughness. The silica shell on the surface of a nanotube enhances its stiffness and rigidity. Our composites, at 4 wt % of the silica-coated MWNTs, display a maximum hardness of 120 +/- 20 MPa, and a Young's modulus of 9 +/- 1 GPa. These are respectively 2 and 3 times higher than those for the polymeric matrix. Here, we describe a method for the silica coating of MWNTs. This is a simple and efficient technique, adaptable to large-scale production, and might lead to new advanced polymer based materials, with very high axial and bending strength.

Journal Article↗
PubMed2001

Fire and ecotoxicological aspects of polyurethane rigid foam.

The main characteristics of fire effluents from polyurethane (PUR) foams are comparable to those from natural materials like wood, cork, or wool. This similarity has been demonstrated by comparative data from analytical and toxicological studies. It is therefore presumed that effluents of these materials present similar hazards to human beings and the environment. In almost all fires, dioxins can be found in the smoke and residues. In fires involving PURs, relevant quantities of halogenated dioxins or furans are not to be expected; this has been confirmed by investigations under controlled laboratory conditions. The insulation properties of rigid PUR foam contribute significantly to environmental protection and the conservation of resources. A number of methods for reusing and recycling PUR rigid foam waste have been developed and realized in practise. The possibilities range from reusing the material itself, generating liquid raw materials, and thermal recycling, even for (H)CFC-containing PUR rigid foams, by cocombustion in suitable plants.

Conservation of Natural Resources↗
PubMed1994

Use of molybdenum telluride as a substrate for the imaging of biological molecules during scanning tunnelling microscopy.

Scanning tunnelling microscopy was used to image biological molecules including supercoiled deoxyribonacetic acid and specific retrovirus enzymes, the reverse transcriptases of the avian myeloblastosis virus, the moloney murine leukaemia virus and the human immunodeficiency virus. Measurements were carried out on graphite and Group VI transition metal dichalcogenide layered crystals. Images obtained with graphite could not be unequivocally interpreted and attachment appears to occur solely at surface defect sites. The layered crystal MoTe2 shows different imaging properties. The bimolecules are clearly visible, distributed over the semiconductor surface, and the molecular shapes and dimensions show good correlation with structure predictions.

DNA, Superhelical↗
PubMed1992

Scanning tunnelling microscopy observations of biomolecules on layered materials.

Scanning tunnelling microscopy (STM) has been performed on the reverse transcriptases of the human immunodeficiency virus (HIV-1) and the moloney murine leukaemia virus (MuLV). The biological molecules are adsorbed on n-type semiconducting MoTe2. The p66 (66 kD) subunit of the RT of HIV-1 is imaged by STM. Both STM and processed transmission electron microscopy (TEM) data show a spherical and horseshoe-like shape of external diameter ca. 65 A, depending on the angle of observation. The STM results show a larger diameter which is related to the curvature radius of the tip of the probing needle. The RTs of HIV-1 and MuLV exhibit a circular hole of ca. 20 A diameter in accordance with structure predictions and functioning considerations. The surface-molecule interaction is discussed in terms of the electronic properties of the semiconductor surface including the influence of small defect sites at the layered crystal surface.

Dialysis↗
PubMed1992

Direct observation of reverse transcriptases by scanning tunneling microscopy.

First images on a nanometer scale of reverse transcriptases (RT) of the human immunodeficiency virus (HIV-1) and of the Moloney murine leukemia virus (MuLV) obtained by scanning tunneling microscopy (STM) are reported. The common feature of the observed molecules is a ring-type or horseshoe shape with hole diameters of approximately 30 A. The STM images are compared with high resolution transmission electron microscopy (TEM) and existing structure predictions. The similarities of the structural data obtained by STM and TEM and their agreement with the structure prediction for the RT of HIV-1 shows the principal possibility to image such biomolecules by STM.

Crystallization↗
PubMed1989

The electron microscopy of the nicotinic acetylcholine receptor.

The nicotinic acetylcholine receptor is a glycoprotein occurring in the electric tissue of the electric ray Torpedo sp. and the electric eel Electrophorus electricus in postsynaptic membranes in high densities. Since these membranes can be easily prepared they have been, since their discovery, a favourable object for electron microscopists. The receptor protein appears in negatively stained membranes as a ring with a diameter of about 75 A. With improved techniques of preparing membranes which contain the receptor molecules in two-dimensional crystalline arrays and especially with computer-aided image processing, the ring appeared as an arrangement of five maxima (representing probably the five receptor subunits) with a five-fold axis of pseudosymmetry perpendicular to the membrane plane. At present the resolution obtained is better than 20 A, enough to depict the receptor's overall shape and dimensions but not enough to resolve functional moieties, as for example the selectivity filter and the gating device of the ion channel, which is an integral part of the receptor complex. The receptor-rich membranes turned out to be models for developing and comparing image processing methods. In this article some of these methods, especially the Circular Harmonic Averaging method, are critically reviewed.

Animals↗
PubMed1989

Symmetry and dimensions of membrane-bound nicotinic acetylcholine receptors from Torpedo californica electric tissue: rapid rearrangement to two-dimensional ordered lattices.

Computer-aided image-averaging methods are applied to different preparations of membrane-bound nicotinic acetylcholine receptor. Circular harmonic averaging (CHA), a novel, reference-independent averaging method developed by W. Kunath and H. Sack-Kongehl [1989) Ultramicroscopy 27:171-184) allows analyzing images of single molecules of the receptor in its native membrane-bound state. The five subunits of the receptor are clearly resolved. At the resolution obtained (approximately 20 A) no differences were observed with resting and agonist-desensitized receptors. A method is proposed for rapidly arranging the acetylcholine receptors to ordered lattices. Depending on the conditions, tetragonal or hexagonal, two-dimensional lattices can be obtained within 2 to 6 days at 4 degrees C. Analysis by CHA shows that the receptor molecules preserve their gross structure and dimensions in these membranes, but that they are randomly oriented. Both lattices, therefore, do not represent true two-dimensional crystals.

Animals↗