Biomedical subjects

M Gutiérrez-Rojas

Publications and source records attributed to M Gutiérrez-Rojas.

7 recordsLinked to original sources

PubMed2005

Hydrocarbon biodegradation in oxygen-limited sequential batch reactors by consortium from weathered, oil-contaminated soil.

We studied the use of sequential batch reactors under oxygen limitation to improve and maintain consortium ability to biodegrade hydrocarbons. Air-agitated tubular reactors (2.5 L) were operated for 20 sequential 21-day cycles. Maya crude oil-paraffin mixture (13,000 mg/L) was used as the sole carbon source. The reactors were inoculated with a consortium from the rhizosphere of Cyperus laxus, a native plant that grows naturally in weathered, contaminated soil. Oxygen limitation was induced in the tubular reactor by maintaining low oxygen transfer coefficients (k(L)a < 20.6 h(-1)). The extent and biodegradation rates increased significantly up to the fourth cycle, maintaining values of about 66.33% and 460 mg x L(-1) x d(-1), respectively. Thereafter, sequential batch reactor operation exhibited a pattern with a constant general trend of biodegradation. The effect of oxygen limitation on consortium activity led to a low biomass yield and non-soluble metabolite (0.45 g SS/g hydrocarbons consumed). The average number of hydrocarbon-degrading microorganisms increased from 6.5 x 10(7) (cycles 1-3) to 2.2 x 10(8) (cycles 4-20). Five bacterial strains were identified: Achromobacter (Alcaligenes) xylosoxidans, Bacillus cereus, Bacillus subtilis, Brevibacterium luteum, and Pseudomonas pseudoalcaligenes. Asphaltene-free total petroleum hydrocarbons, extracted from a weathered, contaminated soil, were also biodegraded (97.1 mg x L(-1) x d(-1)) and mineralized (210.48 mg CO2 x L(-1) x d(-1)) by the enriched consortium without inhibition. Our results indicate that sequential batch reactors under oxygen limitation can be used to produce consortia with high and constant biodegradation ability for industrial applications of bioremediation.

Bacteria↗

PubMed2004

Improvement of the hydrocarbon phytoremediation rate by Cyperus laxus Lam. inoculated with a microbial consortium in a model system.

Hydrocarbon phytoremediation by Cyperus laxus Lam. growing on perlite and inoculated with hydrocarbon-degrading microorganisms was evaluated. Total petroleum hydrocarbons (TPH) were extracted from weathered soil (60.7 g of TPH kg(-1) of dry soil) and spiked on perlite at initial concentration of 5 g of TPH kg(-1) of dry perlite. Phenological characteristics, total microbial viable counts, hydrocarbon degraders and residual hydrocarbons were determined through 180 days of culture. Phenological characteristics of inoculated plants were improved as compared with non-inoculated plants: root biomass was 1.6 times greater, flowering time was reduced (13%), and the number of inflorescences was 1.5 times higher. The rhizospheric bacterial and fungi counts were higher for planted treatments (inoculated and not inoculated) than for unplanted pots. The maximum phytoremediation rate (0.51 mg of TPH g(-1) of dry plant d(-1)) for inoculated plants was reached at 60 days of culture, and was two times higher than for non-inoculated plants (55% TPH removal). Similar hydrocarbon phytoremediation extent values for inoculated (90%) and non-inoculated (85%) plants were obtained at 180 days of culture. The present study demonstrated that mutual benefits between C. laxus and inoculated hydrocarbon-degrading microorganisms are improved during phytoremediation. It is pertinent to note that this is the first report of hydrocarbon phytoremediation by Cyperus laxus Lam., a native plant growing in highly contaminated swamps.

Aluminum Oxide↗

PubMed2003

Biodegradation of hexadecane in liquid and solid-state fermentations by Aspergillus niger.

The biodegradation and mineralisation of hexadecane (HXD) by Aspergillus niger were studied in SmF and Solid-state fermentation (SSF). HXD concentrations ranging from 45 to 180 g/l (SSF) and from 20 to 80 g/l (SmF) were tested. HXD consumption was three times higher and fungal growth was up to 30 times faster in SSF than in SmF. The maximum HXD consumption in SmF was 62% (18% mineralised) and in SSF 100% (52% mineralised) for initial HXD concentrations of 20 and 45 g/l, respectively. The respiratory quotient in SmF increased (from 0.85 to 1.08) with increase in HXD concentration, while it was independent (approximately 0.68) of the initial HXD concentration in SSF. These results showed that the consumption rate and biodegradation efficiency for HXD were higher in SSF than in SmF.

Alkanes↗

PubMed2003

Biodegradation of Maya crude oil fractions by bacterial strains and a defined mixed culture isolated from Cyperus laxus rhizosphere soil in a contaminated site.

Ten bacterial strains were isolated by enrichment culture, using as carbon sources either aliphatics or an aromatic-polar mixture. Oxygen uptake rate was used as a criterion to determine culture transfer timing at each enrichment stage. Biodegradation of aliphatics (10,000 mg L(-1)) and an aromatic-polar mixture (5000 mg L(-1), 2:1) was evaluated for each of the bacterial strains and for a defined culture made up with a standardized mixture of the isolated strains. Degradation of total hydrocarbons (10,000 mg L(-1)) was also determined for the defined mixed culture. Five bacterial strains were able to degrade more than 50% of the aliphatic fraction. The most extensive biodegradation (74%) was obtained with strain Bs 9A, while strains Ps 2AP and UAM 10AP were able to degrade up to 15% of the aromatic-polar mixture. The defined mixed culture degraded 47% of the aliphatics and 6% of the aromatic-polar mixture. The defined mixed culture was able to degrade about 40% of the aliphatic fraction and 26% of the aromatic fraction when grown in the presence of total hydrocarbons, while these microorganisms did not consume the polar hydrocarbons fraction. The proposed strategy that combines enrichment culture together with oxygen uptake rate allowed the isolation of bacterial strains that are able to degrade specific hydrocarbons fractions at high consumption rates.

Arthrobacter↗

PubMed2001

Anaerobic digestion of a nonionic surfactant: inhibition effect and biodegradation.

Nonionic surfactants are used worldwide in various industrial and household applications. Since these compounds are used in aqueous solutions, they primarily enter the environment through sewage and industrial wastewater treatment plants. The objective of this work was to evaluate the inhibitory effect of Triton X-100, a commercial nonionic surfactant, on the anaerobic digestion of lactose. Thus non-ionic surfactants acts as a non-competitive inhibitor with K1 = 250 mgL-1 and a inhibition order of 2.4. Nonetheless if give enough time the sludge was able to degrade 79% of Triton at 0.1 gL-1 d-1 in a UASB reactor. An activity test of this sludge showed that Triton inhibited the acetogenic (both propionic and butyric) and acetoclastic activities, while there were high fermentative and hydrogenotrophic activities (80% and 95%, respectively).

Bacteria, Anaerobic↗

PubMed1995

Production and properties of three pectinolytic activities produced by Aspergillus niger in submerged and solid-state fermentation.

Three extracellular pectinases were produced by Aspergillus niger CH4 by submerged and solid-state fermentation, and their physicochemical and kinetic properties were studied. The highest productivities of endo- and exo-pectinase and pectin lyase were obtained with solid-state fermentation. The kinetic and physicochemical properties of these enzymes were influenced by the type of culture method used. All activities were very different in terms of pH and temperature optima, stability at different pH and temperature values and affinity for the substrate (Km values). In solid-state fermentation, all pectinase activities were more stable at extreme pH and temperature values but the Km values of endo-pectinase and pectin lyase were higher with respect to those activities obtained by the submerged-culture technique. The pectin lyase activity obtained by the submerged-culture technique showed substrate inhibition but the enzyme obtained by solid-state fermentation did not. Electrophoresis, using sodium dodecyl sulphate/polyacrylamide gel with enzymatic extracts obtained for both culture methods, showed the same number of protein bands but some differences were found in their electrophoretic position. The results obtained in this work suggest that the culture method (submerged or solid-state) may be responsible for inducing changes in some of the pectinolytic enzymes produced by A. niger.

Aspergillus niger↗

PubMedDate not supplied

Mass transfer and hydrocarbon biodegradation of aged soil in slurry phase.

Addition of toluene into slurry phase laboratory microcosm is proposed in order to increase desorption rate of hydrocarbons and as an alternative to improve bioavailability of hydrocarbon in aged soils. Our studies showed that toluene has a positive effect on desorption of total petroleum hydrocarbons (TPH). Addition of 14,000 mg toluene/kg of soil, in highly polluted soil, increased the consumption rate of hydrocarbons three times in comparison to control without solvent. In 30 days the initial TPH concentration in soil, 292,000 mg/kg, diminished 45%. Although toluene was able to dissolve complex organic compounds such as asphaltene fraction, it probably yielded a highly toxic toluene-hydrocarbons phase. The inhibitory effect of toluene-TPH was also studied. A substrate inhibition model was used: the k(m) and k(i) constants were 57 and 490 mg TPH/L liquid phase, respectively. Experimental data were well described when the proposed model included sequential desorption and biodegradation phenomena. Damköhler number evaluation showed that rate of mass transfer was the limiting step in overall biodegradation in nonsolvent control. When high concentration of toluene was added, then bioreaction was the limiting step, but inhibitory effect should be considered. However, toluene addition at low concentrations facilitates the biodegradation of aromatic compounds.

Adsorption↗