Biomedical subjects

M Hehli

Publications and source records attributed to M Hehli.

5 recordsLinked to original sources

PubMed2003

[The cannulated osteo-support rod, a new device for the minimally invasive reduction of fractures].

We report a newly developed device for fracture reduction and the positioning of K-wires, especially the guide wires of cannulated screws. It is designed as a cannulated ball spike pusher whose tip and inlay consists of a K-wire fixed in the lumina of the device by a screw. Thus, in displaced fractures, the (guide) wire can be inserted into the bone from the point of reduction, simplifying the intra-operative technique especially in minimally invasive procedures. Additionally, severely displaced fracture fragments can be handled quite comfortably percutaneously by using this device with a "joy stick" technique. The first practical experience in cannulated screw and K-wire osteosyntheses using this device are reported here.

Bone Screws↗

PubMed2003

Adapting the fluoroscope to image-guided surgery.

Image-guided techniques have been well established in all surgical disciplines for years. To achieve an optimised work flow during image-guided surgery, the surgeon should be able to manipulate the visual feedback and therefore the imaging unit. C-arm fluoroscopy is the imaging modality routinely used for intraoperative imaging in orthopaedic surgery. The C-arm fluoroscope is positioned and handled by a radiographer on vocal commands, which means that the surgeon depends on external help to manipulate the visual feedback and the work flow is not optimised. The MEPUC interface adapts the C-arm fluoroscope to the needs of image-guided orthopaedic procedures. MEPUC is an acronym for Motorised Exact-Positioning Unit for C-arm. In the hardware component of the MEPUC a conventional C-arm fluoroscope is equipped with stepping motors. The software component allows the surgeon to control the motorised movements of the fluoroscope. The MEPUC interface enables the surgeon to position the C-arm fluoroscope independently in the operating room. Further advantages are achievable when the MEPUC interface is combined with surgical navigation, as this combination allows fully automatic reproduction of former projections. Clinical experience with the MEPUC interface suggests that the work flow for intraoperative imaging is improved and personal requirements reduced.

Fluoroscopy↗

PubMed2001

[LISS tractor. Combination of the "less invasive stabilization system" (LISS) with the AO distractor for distal femur and proximal tibial fractures].

Minimally invasive plate osteosynthesis (MIPO) in conjunction with the less invasive stabilization system (LISS) first requires reduction and retention of the fracture using such aids as external fixation, distractors, and percutaneous reduction clamps before the plate can be applied. Based on the open indirect "biological" technique of osteosynthesis, the LISS was combined with an AO distractor (LISS tractor) integrated into the LISS plate. This made reduction possible against the plate before final fixation of the LISS plate. The LISS tractor concept was validated in three patients and we present the technique here. No malalignments > 5 degrees occurred. Fluoroscopy lasted 3.0 min (range: 2.1-4.5) and the operation 125 min (range: 90-150). Modification of the well-known LISS technique by integrating the distractor into the LISS plate to simplify reduction and to provide temporary retention of the fracture has the potential to reduce the fluoroscopy time, the operation time, the rate of malalignments, and the learning curve for this MIPO technique.

Aged↗

PubMed2001

Mechanical boundary conditions of fracture healing: borderline indications in the treatment of unreamed tibial nailing.

Unreamed nailing favors biology at the expense of the achievable mechanical stability. It is therefore of interest to define the limits of the clinical indications for this method. The extended usage of unreamed tibial nailing resulted in reports of an increased rate of complications, especially for the distal portion of the tibia. The goals of this work were to gain a thorough understanding of the load-sharing mechanism between unreamed nail and bone in a fractured tibia, to identify the mechanical reasons for the unfavorable clinical results, and to identify borderline indications due to biomechanical factors. In a three-dimensional finite element model of a human tibia, horizontal defects were stabilized by means of unreamed nailing for five different fracture locations, including proximal and distal borderline indications for this treatment method. The loading of the bone, the loading of the implant and the inter-fragmentary strains were computed. The findings of this study show that with all muscle and joint contact forces included, nailing leads to considerable unloading of the interlocked bone segments. Unreamed nailing of the distal defect results in an extremely low axial and high shear strain between the fragments. The results suggest that mechanical conditions are advantageous to unreamed nailing of proximal and mid-diaphyseal defects. Apart from biological reasons, clinical problems reported for distal fractures may be due to the less favorable mechanical conditions in unreamed nailing. From a biomechanical perspective, the treatment of distal tibial shaft fractures by means of unreamed nailing without additional fragment contact or without stabilizing the fibula should be carefully reconsidered.

Biomechanical Phenomena↗

PubMed2000

Minimally invasive bone harvesting tools.

The most readily available source for autologous bone graft used in spinal fusion (the gold standard) is the iliac crest. However, the open surgical approach for harvesting corticocancellous iliac bone is associated with a marked increase in morbidity. This study suggests two alternatives to the traditional open harvesting procedure. For anterior interbody fusion procedures using a cage, the autologous bone is harvested regionally from a neighboring vertebral body. Alternatively, using minimally invasive techniques, a custom bone graft harvester with a flexible tube and cutting tip allows harvesting of autologous bone from a single entry point at the iliac crest. The effect on the mechanical strength of a lumbar vertebra of removing a cylindrical regional bone graft was studied in a cadaveric model. The bone defect was filled using three different filler materials: a porous tri-calcium phosphate plug, a porous tantalum plug, and a self-setting calcium phosphate cement. After plug removal, the vertebral body's strength in flexion/compression loading was reduced significantly, but could be restored to at least intact values with any of the three filler materials. The minimally invasive bone graft harvester was tested in three cadaveric pelves. With the cutting tip being guided within the cortical boundaries of the pelvis, cancellous bone volumes of 10-20 cc could be harvested from each iliac bone. Regional bone graft harvest in anterior spine surgery is suggested to be anatomically safe and biomechanically acceptable. Any of the three filler materials can restore the vertebral body's mechanical strength, but the filler's long-term resorption/remodeling or osteointegration behavior is unknown. The minimally invasive bone graft harvester is a novel tool, which performed satisfactorily under laboratory conditions, but clinical results are still missing.

Bone Transplantation↗