Biomedical subjects

M Itävaara

Publications and source records attributed to M Itävaara.

4 recordsLinked to original sources

PubMed2006

Integration of electrokinetics and chemical oxidation for the remediation of creosote-contaminated clay.

Remediation of clayey soils that are contaminated with polycyclic aromatic hydrocarbons (PAHs) is a challenging task that may require integration of several technologies. The benefits of integrating in situ electrokinetic remediation with chemical oxidation were evaluated in laboratory-scale experiments lasting for 8 weeks. A voltage gradient of 48 V/m of direct current and 4.7 V/m of alternating current and periodic additions of chemical oxidants were applied to creosote-contaminated soil. Electrokinetically enhanced oxidation with sodium persulphate resulted in better PAH removal (35%) than either electrokinetics (24%) or persulphate oxidation (12%) alone. However, the improvement was shown only within 1/3 (5 cm) of the soil compartment. Electrokinetics did not improve the performance of Fenton oxidation. Both chemical oxidants created more positive oxidation-reduction potential than electrokinetic treatment alone. On the other hand, persulphate treatment impaired the electroosmotic flow rate. Elemental analyses showed reduction in the natural Al and Ca concentrations, increase in Zn, Cu, P and S concentrations and transfer of several metal cations towards the cathode. In conclusion, the results encourage to further optimisation of an integrated remediation technology that combines the beneficial effects of electrokinetics, persulphate oxidation and Fenton oxidation.

Aluminum Silicates↗

PubMed2002

The influence of lignin content and temperature on the biodegradation of lignocellulose in composting conditions.

The aim of this research was to study the influence of lignin content and composting temperature on the biodegradation of lignin-containing pulp and paper products in a controlled composting test (European standard prEN 14046). Lignin reduced the biodegradation of the samples, and there was a linear correlation between the lignin content and the biodegradation of pulp and paper products at 58 degrees C. The influence of incubation temperature (35, 50 and 58 degrees C) on biodegradation was studied using bleached kraft paper containing 0.2 wt% lignin and mechanical pulp (stone-ground wood) containing 24-27 wt% lignin. Mechanical pulp biodegraded better at lower temperatures, while kraft paper biodegraded well at all three temperatures. Microbial activity was evaluated by measuring CO(2) evolution and the change in ATP content, and fungal biomass by measuring the ergosterol content during the composting experiments. Kraft paper strongly increased microbial activity during the controlled composting test, but the activity returned to the background level at the end of the composting test. The proportion of sample carbon converted to microbial biomass carbon was considerably higher at lower incubation temperatures. Changes in microbial community structure during biodegradation of mechanical pulp and kraft paper at 50 degrees C were studied by the PCR-based technique denaturing gradient gel electrophoresis. Changes in the microbial community were observed during the intensive degradation phase of kraft paper.

Bacteria↗

PubMed2001

Ecotoxicity tests for compost applications.

Interest in the ecological effects of composting has been growing recently. However, no established methods are available for testing the toxicity of composted materials. Despite this, international and national quality requirements define that compost shall not contain any environmentally harmful substances. Safety requirements have to be fulfilled if the produced compost is intended for agricultural use. This literature review focuses on methods that could potentially be used to evaluate the ecotoxicity of compost. The toxicity test methods discussed are those employing microbes, enzymes, soil fauna, and plants.

Animals↗

PubMed2001

Biodegradation of radiolabelled synthetic lignin (14C-DHP) and mechanical pulp in a compost environment.

Mineralization of radioactive synthetic lignin (14C-DHP) was studied in a compost environment at 35, 50 and 58 degrees C. Compost samples were successively extracted with water, dioxane and alkali, and the molecular weight distribution of some extracts was determined by gel permeation chromatography (GPC). Biodegradation of lignin-containing spruce groundwood (SGW) and pine sawdust was concurrently determined in controlled composting tests by measuring evolved CO2. The temperatures were the same as in the 14C-DHP mineralization experiment and bleached kraft paper, with a lignin content of 0.2%, was used as a reference. The mineralization of 14C-DHP was relatively high (23-24%) at 35 degrees C and 50 degrees C, although the mixed population of compost obviously lacks the most effective lignin degraders. At 58 degrees C the mineralization of 14C-DHP, as well as the biodegradation of SGW and sawdust, was very low, indicating that the lignin-degrading organisms of compost were inactivated at this temperature. SGW was poorly biodegradable (<40%) in controlled composting tests compared with kraft paper (77-86%) at all temperatures, which means that lignin inhibits the degradation of carbohydrates. During the incubation, water-soluble degradation products, mainly monomers and dimers, and the original 14C-DHP were either mineralized or bound to humic substances. A substantial fraction of 14C-DHP was incorporated into humin or other insolubles.

Biodegradation, Environmental↗