Biomedical subjects

M J Kleeman

Publications and source records attributed to M J Kleeman.

5 recordsLinked to original sources

PubMed2001

A 3D Eulerian source-oriented model for an externally mixed aerosol.

A 3D Eulerian source-oriented model for an externally mixed aerosol is developed and then used to compute the contribution that different emission sources make to regional fine particle concentrations in the South Coast Air Basin surrounding Los Angeles, CA, on September 25, 1996. The model simultaneously tracks fine particle concentrations (PM2.5), inhalable particle concentrations (PM10), ozone, and other gaseous pollutant concentrations yielding a tool that can be used to study the control of all of the regulated contaminants in the atmosphere within a single unified framework. Model predictions identify geographical areas that are influenced by PM2.5 associated with crustal material other than paved road dust, paved road dust, diesel engines, food cooking, noncatalyst equipped gasoline engines, catalyst-equipped gasoline engines, combustion of high sulfur-content fuel, other primary particle sources, sea salt, and marine background sulfate particles. The contribution that each of these source types makes to regional fine particle concentrations is distinct, reflecting the unique chemical composition, spatial distribution, and diurnal trends of primary emissions. The single largest contribution to regional PM2.5 in the South Coast Air Basin surrounding Los Angeles is associated with the accumulation of secondary ammonium nitrate on background marine sulfate particles. This pattern indicates that control of PM2.5 concentrations in Los Angeles must be accomplished through a program that includes both reductions in the emissions of gaseous precursors of secondary PM2.5 as well as control of primary particle emissions.

Aerosols↗

PubMed2001

Effect of emissions control programs on visibility in southern California.

A new method for the analysis and display of the effect of emissions controls on visibility is applied to conditions in southern California. An advanced mechanistic air quality model that represents airborne particles as a source-oriented external mixture first is used to track emissions source contributions to the size distribution and chemical composition of airborne particles at Claremont, CA, under heavy smog conditions. The resulting description of the aerosol is used in a Mie scattering calculation to determine the magnitude and particle size dependence of light scattering and absorption in the atmosphere. The resulting light scattering and absorption coefficient values are supplied to an image processing-based visibility model that creates full color representations of the appearance of the local terrain in the presence of the specified level of air pollution based on satellite-generated landscape images. By linking these models, a direct connection is established between source emissions and resulting visual air quality. The composite modeling system then is used to studythe effectthat different emissions control strategies would have on visibility in southern California. An aggressive program of 92 specific emissions control measures that include primary particle controls plus controls on reactive gases that act as secondary aerosol precursors would more than double visual range at Claremont under the 1987 historical conditions studied. Synthetic landscape images show that the mountains to the north of Claremont that are not visible at a range of 10 km under base-case conditions would be visible if the emissions controls described above were applied.

Absorption↗

PubMed2001

Detection of alkaline ultrafine atmospheric particles at Bakersfield, California.

Two collected micro-orifice uniform deposit impactors (MOUDIs) and a filter-based sampler were used to measure the size distribution and chemical composition of atmospheric particulate matter at Bakersfield, CA, between January 14 and 23, 1999. The peak number concentration of airborne ultrafine particles measured was 1.45 x 10(11) m-3, which is a factor of approximately 3 higher than the peak airborne ultrafine-particle number concentration measured previously in Pasadena, CA. Chemical analysis revealed that airborne ultrafine particles (Dp < 0.1 micron) at Bakersfield contained significant amounts of water-soluble species, including calcium, sodium, ammonium ion, nitrate, and sulfate. Other chemical species detected in the ultrafine size range included potassium, iron, copper, zinc, and strontium. A balance of aqueous ions showed that ultrafine particles were alkaline in nature with calcium acting as the dominant cation. Bulk samples of airborne particles with diameter less than 2.0 microns (PM2.0) were essentially neutral, but particle acidity was found to be a strong function of particle size. The results of this experiment suggest that areas deep in the human lung that preferentially collect particles in the ultrafine size range could be exposed to locally acidic or alkaline conditions even if the integrated airborne particle complex is essentially neutral.

Air Pollutants↗

PubMed2001

Measurement of emissions from air pollution sources. 3. C1-C29 organic compounds from fireplace combustion of wood.

Organic compound emission rates for volatile organic compounds (VOC), gas-phase semivolatile organic compounds, and particle-phase organic compounds are measured from residential fireplace combustion of wood. Firewood from a conifer tree (pine) and from two deciduous trees (oak and eucalyptus) is burned to determine organic compound emissions profiles for each wood type including the distribution of the alkanes, alkenes, aromatics, polycyclic aromatic hydrocarbons (PAH), phenol and substituted phenols, guaiacol and substituted guaiacol, syringol and substituted syringols, carbonyls, alkanoic acids, resin acids, and levoglucosan. Levoglucosan is the major constituent in the fine particulate emissions from all three wood types, contributing 18-30% of the fine particulate organic compound emissions. Guaiacol (2-methoxyphenol), and guaiacols with additional substituents at position 4 on the molecule, and resin acids are emitted in significant quantities from pine wood combustion. Syringol (2,6-dimethoxyphenol) and syringols with additional substituents at position 4 on the molecule are emitted in large amounts from oak and eucalyptus firewood combustion, but these compounds are not detected in the emissions from pine wood combustion. Syringol and most of the substituted syringols are found to be semivolatile compounds that are present in both the gas and particle phases, but two substituted syringols that have not been previously quantified in wood smoke emissions, propionylsyringol and butyrylsyringol, are found exclusively in the particle phase and can be used to help trace hardwood smoke particles in the atmosphere. Benzene, ethene, and acetylene are often used as tracers for motor vehicle exhaust in the urban atmosphere. The contribution of wood smoke to the ambient concentrations of benzene, ethene, and acetylene could lead to an overestimate of the contribution of motor vehicle tailpipe exhaust to atmospheric VOC concentrations.

Air Pollutants↗

PubMed2001

Comparison of real-time instruments used to monitor airborne particulate matter.

Measurements collected using five real-time continuous airborne particle monitors were compared to measurements made using reference filter-based samplers at Bakersfield, CA, between December 2, 1998, and January 31, 1999. The purpose of this analysis was to evaluate the suitability of each instrument for use in a real-time continuous monitoring network designed to measure the mass of airborne particles with an aerodynamic diam less than 2.5 microns (PM2.5) under wintertime conditions in the southern San Joaquin Valley. Measurements of airborne particulate mass made with a beta attenuation monitor (BAM), an integrating nephelometer, and a continuous aerosol mass monitor (CAMM) were found to correlate well with reference measurements made with a filter-based sampler. A Dusttrak aerosol sampler overestimated airborne particle concentrations by a factor of approximately 3 throughout the study. Measurements of airborne particulate matter made with a tapered element oscillating microbalance (TEOM) were found to be lower than the reference filter-based measurements by an amount approximately equal to the concentration of NH4NO3 observed to be present in the airborne particles. The performance of the Dusttrak sampler and the integrating nephelometer was affected by the size distribution of airborne particulate matter. The performance of the BAM, the integrating nephelometer, the CAMM, the Dusttrak sampler, and the TEOM was not strongly affected by temperature, relative humidity, wind speed, or wind direction within the range of conditions encountered in the current study. Based on instrument performance, the BAM, the integrating nephelometer, and the CAMM appear to be suitable candidates for deployment in a real-time continuous PM2.5 monitoring network in central California for the range of winter conditions and aerosol composition encountered during the study.

Air Pollution↗