Biomedical subjects

M J Moulton

Publications and source records attributed to M J Moulton.

17 recordsLinked to original sources

PubMed1998

MRI-radiofrequency tissue tagging in patients with aortic insufficiency before and after operation.

BACKGROUND: Magnetic resonance imaging tissue tagging is a relatively recent methodology that describes ventricular systolic function in terms of intramyocardial ventricular deformation. Because the analysis involves the use of many intramyocardial points to describe systolic deformation, it is theoretically more sensitive at describing subtle differences in regional myocardial fiber shortening when compared with conventional measures of ventricular function such as wall thickening. The objectives of this study were (1) to define sensitive indices of ventricular systolic deformation to assist the clinician in the surgical evaluation of patients with aortic insufficiency, and (2) to quantify differences in regional systolic deformation before and after surgery for aortic insufficiency. METHODS: Magnetic resonance imaging with tissue tagging was performed on 10 normal volunteers and 8 patients with chronic severe aortic insufficiency. Follow-up postoperative studies (5.4+/-1.1 months) were obtained in 6 patients who underwent Ross procedure (1 patient), David procedure (1), and St. Jude aortic valve replacement (4). RESULTS: There was no significant difference in fractional area change, overall circumferential shortening, or overall radial thickening among the normal group, the preoperative aortic insufficiency group, or the postoperative aortic insufficiency group. However, on a regional basis, there was a decrease in posterior wall circumferential strains in the postoperative aortic insufficiency group (29%+/-13% preoperative aortic insufficiency (n=6) versus 24%+/-12% postoperative aortic insufficiency (n=6), p=0.02). CONCLUSIONS: On regional analysis, there was a small but significant decrease in posterior wall circumferential shortening after operation. Magnetic resonance imaging tissue tagging is a sensitive and clinically applicable method of quantifying regional ventricular wall function before and after intervention for aortic insufficiency.

Adult↗

PubMed1998

The Frank Stinchfield Award. Inhibition of heterotopic ossification with radiation therapy in an animal model.

An animal model for the study of heterotopic ossification was developed and the effects of perioperative radiation were analyzed. In Phase I, New Zealand White rabbits (n = 18) underwent surgery either with or without muscle injury on each hip to establish the most reliable model in which to study heterotopic ossification. In Phase II, rabbits (n = 36) underwent either 400, 800, or 1200 cGy radiation to one hip 24 hours after bilateral hip surgery to establish a dose response relationship for postoperative radiation therapy. In Phase III, rabbits (n = 24) underwent preoperative radiation therapy (800 cGy) at 4, 16, or 24 hours preoperatively to investigate the mechanism of action and efficacy of preoperative radiation therapy. Monthly radiographs were graded by blinded observers for severity of heterotopic ossification. Mean grade, intraobserver and interobserver variability, and statistical significance were evaluated. In Phase II, 17 of 18 rabbits generated heterotopic ossification in both hips, and the mean grade of heterotopic ossification was always greater on the operative side with intentional muscle injury. Variability in the grading was considered excellent. Phase II revealed that 800 cGy was the minimal effective dose. Contrary to hypothesis, Phase III revealed an increasing grade of heterotopic ossification coinciding with a decreasing preoperative time interval, with the difference in heterotopic ossification grade with 24-hour versus 4-hour preoperative radiation being significant. The rabbit model is reliable and reproducible and closely resembles the human clinical situation after hip surgery. Preoperative and postoperative radiation effectively prevented heterotopic ossification formation. The results support the use of preoperative radiation and establish a need for additional investigation regarding the mechanism of action and timing of preoperative radiation therapy.

Animals↗

PubMed1997

Radiation-induced physical changes in UHMWPE implant components.

Post-irradiation aging of ultra-high molecular weight polyethylene (UHMWPE) is not well understood. Retrieval studies and in vitro aged specimens have shown oxidative changes along with increases in crystallinity. Critical analysis and review of the polymer science and polymer physics literature shows that while oxidation may be important during the first year post-irradiation, subsequent aging occurs because of initial gamma radiation-induced chain scission leading to eventual isothermal crystallization of polymer chains in the amorphous regions of the UHMWPE bulk. Mechanical properties of aged UHMWPE are not as yet clear and, until such data become available, gamma irradiation sterilization must be used with caution.

Biocompatible Materials↗

PubMed1997

Orderly oriented wire mesh: a novel porous coating.

As an alternative to commercially available porous beads and fiber metal mesh, a new porous coating, orderly oriented wire mesh (OOWM), was developed. Rectangular plugs, 10 x 5 x 5 mm with porous-coated beads, and four different OOWM configurations were inserted into bilateral femoral condyles of adult beagles. Dogs were sacrificed immediately after implantation, and at 4 weeks, 8 weeks, and 12 weeks postimplantation. Mechanical pullout strength of plugs revealed that porous beads are equivalent to the simplest OOWM at 12 weeks postimplantation. Of the four OOWMs tested, the 25 x 25 single layer was significantly more stable than others at 4 weeks postimplantation. These results indicate that in an in vivo unloaded model, OOWM is just as effective as the porous beads in achieving early bone ingrowth and stability.

Animals↗

PubMed1997

Percutaneous pinning of proximal humerus fractures: a biomechanical study.

Mechanical testing of two-part surgical neck fractures fixed with four different pin configurations was performed. Ten fresh, frozen, unembalmed humeri stripped of all soft tissues were used; the surgical neck was osteotomized perpendicular to the humerus long axis. Terminally threaded 2.5-mm AO pins were used to fix the fracture. Humeri then were tested in both torsion and bending on a custom-made jig using Instron 1331 to assess the rigidity of pinning constructs. In torsion, two lateral pin construct was significantly less rigid than all other pin configurations. The addition of an anterior pin to two lateral pins did not increase bending rigidity, but significantly increased torsional stiffness. The addition of two bicortical tuberosity pins or two bicortical tuberosity pins and one anterior pin to two lateral pins significantly increased rotational and bending rigidity. Results confirm clinical data, and the authors conclude that multiplanar pins are needed to augment torsional stiffness, and that the addition of two bicortical tuberosity pins enhances bending rigidity.

Biomechanical Phenomena↗

PubMed1996

Obesity is not a risk factor for significant adverse outcomes after cardiac surgery.

BACKGROUND: Obese patients undergoing cardiac surgery are often thought to have prohibitive perioperative risk despite the lack of sufficient data to support this assumption. METHODS AND RESULTS: To assess the significance of obesity as a risk factor in patients undergoing cardiac surgery, we analyzed data from 2299 patients undergoing procedures requiring cardiopulmonary bypass from January 1, 1991, to December 31, 1993. Obesity was defined by use of the body mass index, defined as weight in kilograms divided by height in meters squared. Potential adverse outcomes analyzed included operative mortality, deep sternal wound infection, superficial sternal wound infection, infection at the saphenous vein harvest site, stroke, renal failure, adult respiratory distress syndrome, prolonged mechanical ventilation, pneumonia, sepsis, atrial arrhythmias, pulmonary embolism, need for early reexploration for bleeding, and ventricular arrhythmias. To control for the confounding effects of other risk factors, we performed a multivariate logistic regression analysis. Potential covariates considered in the logistic model included age, sex, race, history of reoperation, congestive heart failure, prior myocardial infarction, renal failure, diabetes, hypertension, chronic obstructive pulmonary disease or stroke, and cardiopulmonary bypass and aortic cross-clamp time. Twenty-five percent of patients (567/2299) were classified as obese. The results of the multivariate regression demonstrated that obesity was a risk factor only for superficial sternal wound infection (P < .001; odds ratio, 2.3), leg infections (P = .005; odds ratio, 1.8), and atrial dysrhythmias (P = .04; odds ratio, 1.2). Notably, obesity did not predispose toward increased pulmonary complications or deep sternal wound infection (P = .65). CONCLUSIONS: With the exception of superficial wound complications and atrial dysrhythmias, obesity is not a significant multivariate risk factor for adverse outcomes. The results indicate that obese patients may safely undergo cardiac surgery with due attention to technical considerations designed to minimize wound complications.

Adult↗

PubMed1996

Magnetic resonance imaging provides evidence for remodeling of the right ventricle after single-lung transplantation for pulmonary hypertension.

BACKGROUND: In end-stage pulmonary hypertension (PH), the degree of right ventricular (RV) dysfunction has been considered so severe as to require combined heart-lung transplantation. Nevertheless, left ventricular (LV) and RV hemodynamics return to relatively normal levels after single-lung transplantation (SLT) alone. Accordingly, to test the hypothesis that LV and RV systolic function improves after SLT and that the dilated, thick-walled RV reverts to more normal geometry, we used cine MRI and finite-element (FE) analysis to study patients with end-stage PH. METHODS AND RESULTS: Seven patients with end-stage PH underwent cine MRI before and after SLT, and eight normal volunteers were also imaged with cine MRI. Short-axis images at the midventricular level were analyzed with customized image-processing software. The LV and RV ejection fractions, velocity of fiber shortening, RV end-diastolic (ED) and end-systolic (ES) chamber areas, and RV ES and ED wall thicknesses were calculated directly from the MRI images. Two-dimensional FE models of the heart were constructed from the MRI images at early diastole. LV and RV pressures were measured in the patients with a cardiac catheterization before and after SLT. Models were solved to yield diastolic LV, RV, and septal wall stresses. By use of a nonlinear optimization algorithm, LV and RV diastolic maternal properties were determined by minimization of the leastsquares difference between FE model-predicted and MRI-measured LV, RV, and epicardial chamber areas and circumferences. The results demonstrated a substantial reduction in RV wall stress after SLT (1.8 x 10(5) dynes/cm2 pre-SLT to 2 x 10(4) dynes/cm2 post-SLT; P < .001). The average RV diastolic elastic modulus was reduced significantly after SLT (1.5 x 10(6) dynes/cm2 pre-SLT to 1 x 10(5) dynes/cm2 post-SLT; P = .01), but there was no change in the LV elastic modulus. RV velocity of fractional shortening increased significantly after SLT (0.23 pre-SLT to 0.58 post-SLT, P = .02), and RV ED and ES wall thicknesses were reduced significantly (ED, 0.86 cm pre-SLT to 0.65 cm post-SLT, P = .03 and ES, 1.06 cm pre-SLT to 0.72 cm post-SLT, P = .005). CONCLUSIONS: These results provide evidence supporting the contention that LV and RV systolic function improved after SLT for end-stage PH and that the RV underwent significant remodeling within 3 to 6 months after lung transplantation.

Adolescent↗

PubMed1996

Myocardial material property determination in the in vivo heart using magnetic resonance imaging.

OBJECTIVES: To determine nonlinear material properties of passive, diastolic myocardium using magnetic resonance imaging (MRI) tissue-tagging, finite element analysis (FEA) and nonlinear optimization. BACKGROUND: Alterations in the diastolic material properties of myocardium may pre-date the onset of or exist exclusive of systolic ventricular dysfunction in disease states such as hypertrophy and heart failure. Accordingly, significant effort has been expended recently to characterize the material properties of myocardium in diastole. The present study defines a new technique for determining material properties of passive myocardium using finite element (FE) models of the heart, MRI tissue-tagging and nonlinear optimization. This material parameter estimation algorithm is employed to estimate nonlinear material parameter sin the in vivo canine heart and provides the necessary framework to study the full complexities of myocardial material behavior in health and disease. METHODS AND RESULTS: Material parameters for a proposed exponential strain energy function were determined by minimizing the least squares difference between FE model-predicted and MRI-measured diastolic strains. Six mongrel dogs underwent MRI imaging with radiofrequency (RF) tissue-tagging. Two-dimensional diastolic strains were measured from the deformations of the MRI tag lines. Finite element models were constructed from early diastolic images and were loaded with the mean early to late left ventricular and right ventricular diastolic change in pressure measured at the time of imaging. A nonlinear optimization algorithm was employed to solve the least squares objective function for hte material parameters. Average material parameters for the six dogs were E = 28,722 +/- 15984 dynes/cm2 and c = 0.00182 +/- 0.00232 cm2/dyne. CONCLUSION: This parameter estimation algorithm provides the necessary framework for estimating the nonlinear, anisotropic and non-homogeneous material properties of passive myocardium in health and disease in the in vivo beating heart.

Algorithms↗

PubMed1996

Reexploration for bleeding is a risk factor for adverse outcomes after cardiac operations.

OBJECTIVE: Although previous studies have included early reexploration for bleeding as a risk factor in analyzing adverse outcomes after cardiac operations, reexploration for bleeding has not been systematically examined as a multivariate risk factor for increased morbidity and mortality after cardiac surgery. Furthermore, multivariate predictors of the need for reexploration have not been identified. Accordingly, we performed a retrospective analysis of 6100 patients requiring cardiopulmonary bypass from January 1, 1986, to December 31, 1993. METHODS: Eighty-five patients who had ventricular assist devices were excluded from further analysis because of the prevalence of bleeding and the significant morbidity and mortality associated with placement of a ventricular assist device, unrelated to reexploration. In the remaining 6015 patients, potential adverse outcomes analyzed included operative mortality, mediastinitis, stroke, renal failure, adult respiratory distress syndrome, prolonged mechanical ventilation, sepsis, atrial arrhythmias, and ventricular arrhythmias. To control for the confounding effects of other risk factors, we performed a multivariate logistic regression analysis. Potential covariates considered in the logistic model included age, sex, race, history of reoperation, urgency of the operation, congestive heart failure, prior myocardial infarction, renal failure, diabetes, hypertension, chronic obstructive pulmonary disease or stroke, and the bypass and crossclamp time. RESULTS: The overall incidence of reexploration was 4.2% (253/6015). Four independent risk factors--increased patient age (p < 0.001), preoperative renal insufficiency (p = 0.02), operation other than coronary bypass (p < 0.001), and prolonged bypass time (p = 0.0.3)--were identified as predictors of the need for reexploration. The preoperative use of aspirin, heparin, or thrombolytic agents and the bleeding time were not identified as predictors. Reexploration for bleeding was identified as a strong independent risk factor for operative mortality (p = 0.005), renal failure (p < 0.0001), prolonged mechanical ventilation (p < 0.0001), adult respiratory distress syndrome (p = 0.03), sepsis (p < 0.0001), and atrial arrhythmias (p = 0.006). CONCLUSION: These data indicate that meticulous attention to surgical hemostasis and possibly application of recently developed modalities designed to facilitate perioperative correction of coagulopathy could improve outcomes after cardiac operations.

Age Factors↗

PubMed1996

Spline surface interpolation for calculating 3-D ventricular strains from MRI tissue tagging.

A method is developed and validated for approximating continuous smooth distributions of finite strains in the ventricles from the deformations of magnetic resonance imaging (MRI) tissue tagging "tag lines" or "tag surfaces." Tag lines and intersections of orthogonal tag lines are determined using a semiautomated algorithm. Three-dimensional (3-D) reconstruction of the displacement field on tag surfaces is performed using two orthogonal sets of MRI images and employing spline surface interpolation. The 3-D regional ventricular wall strains are computed from an initial reference image to a deformed image in diastole or systole by defining a mapping or transformation of space between the two states. The resultant mapping is termed the measurement analysis solution and is defined by determining a set of coefficients for the approximating functions that best fit the measured tag surface displacements. Validation of the method is performed by simulating tag line or surface deformations with a finite element (FE) elasticity solution of the heart and incorporating the measured root-mean-square (rms) errors of tag line detection into the simulations. The FE-computed strains are compared with strains calculated by the proposed procedure. The average difference between two-dimensional (2-D) FE-computed strains and strains calculated by the measurement analysis was 0.022 +/- 0.009 or 14.2 +/- 3.6% of the average FE elasticity strain solution. The 3-D displacement reconstruction errors averaged 0.087 +/- 0.002 mm or 2.4 +/- 0.1% of the average FE solution, and 3-D strain fitting errors averaged 0.024 +/- 0.011 or 15.9 +/- 2.8% of the average 3-D FE elasticity solution. When the rms errors in tag line detection were included in the 2-D simulations, the agreement between FE solution and fitted solution was 24.7% for the 2-D simulations and 19.2% for the 3-D simulations. We conclude that the 3-D displacements of MRI tag lines may be reconstructed accurately; however, the strain solution magnifies the small errors in locating tag lines and reconstructing 3-D displacements.

Animals↗

PubMed1996

High tibial osteotomy: an operation based on a spurious mechanical concept. A theoretic treatise.

The biomechanical basis for high tibial osteotomy (HTO) is erroneously conceived, in that to unload the medial side of the knee, an osteotomy would have to be performed of sufficient magnitude to shift the lateral side of the knee joint far enough medially to intersect the dynamic axis, not the mechanical axis. The resulting angular deformity would be functionally and cosmetically unacceptable in the eyes of most patients and surgeons. To corroborate these theoretic considerations, and to define the angular deformity necessary to unload the medial side of the knee joint during the midstance phase of gait, a cadaver osteotomy model was used with compartmental loading defined by direct observation, as well as by load-sensitive film. As predicted, medial compartment unloading did not occur until the lateral side of the joint crossed the dynamic axis. In both cadavers tested, the extremity alignment necessary to unload the medial side was approximately 25 degrees valgus. The efficacy of HTO should be re-examined, as its biomechanical basis is fundamentally flawed.

Biomechanical Phenomena↗

PubMed1995

Mechanical dysfunction in the border zone of an ovine model of left ventricular aneurysm.

BACKGROUND: The pathophysiology of regional mechanical dysfunction in the border zone (BZ) region of left ventricular aneurysm was studied in an ovine model using magnetic resonance imaging tissue-tagging and regional deformation analysis. METHODS: Transmural infarcts were created in adult Dorsett sheep (n = 8) by ligation of the distal homonymous coronary artery and were allowed to mature into left ventricular aneurysms for 8 to 12 weeks. Animals were imaged subsequently using double oblique magnetic resonance imaging with radiofrequency tissue tagging. Short axis slices were selected for analysis that included predominantly the septal component of the aneurysm as well as adjacent BZ regions in the anterior and posterior ventricular walls. Dark grid patterns of magnetic presaturations were placed on the myocardium and tracked as they deformed during the diastolic, isovolumic systolic, and systolic ejection phases of the cardiac cycle. Regional ventricular wall strains were calculated in BZ regions and regions remote from the aneurysm and compared with strains measured in corresponding regions from normal control sheep (n = 6). RESULTS: Diastolic midwall circumferential strains (fiber extensions) were relatively preserved, but abnormal circumferential lengthening strains were observed in the BZ regions during isovolumic systole. Peak circumferential strains ranged from 0.04 to 0.07 in the BZ regions but averaged -0.05 in the normal hearts (p = 0.002 for the anterior BZ and p = 0.001 for the posterior BZ). Midwall end-systolic fiber strains were depressed in the anterior BZ (-0.03 to -0.09 for the BZ versus -0.11 for the normal heart, p < 0.0001) but not in the posterior BZ (p = 0.19). CONCLUSIONS: Our data support the theory that the stretching of BZ fibers during isovolumic systole contributed to a reduction in fiber shortening during systolic ejection and thus reduced the overall contribution of these fibers to forward ventricular output.

Animals↗

PubMed1995

An inverse approach to determining myocardial material properties.

Passive myocardial material properties have been measured previously by subjecting test samples of myocardium to in vitro load-deformation analysis or, in the intact heart, by pressure-volume relationships. A new method for determining passive material properties, described in this paper, couples a p-version finite element model of the heart, a nonlinear optimization algorithm and a dense set of transmural measured strains that could be obtained in the intact heart by magnetic resonance imaging (MRI) radiofrequency tissue tagging. Unknown material parameters for a nonlinear, nonhomogeneous material law are determined by solving an inverse boundary value problem. An objective function relating the least-squares difference of model-predicted and measured strains is minimized with respect to the unknown material parameters using a novel optimization algorithm that utilizes forward finite element solutions to calculate derivatives of model-predicted strains with respect to the material parameters. Test cases incorporating several salient features of the inverse material identification problem for the heart are formulated to test the performance of the inverse algorithm in typical experimental conditions. Known true material parameters can be determined to within a small tolerance and random noise is shown not to affect the stability of the inverse solution appreciably. On the basis of these validation experiments, we conclude that the inverse material identification problem for the heart can be extended to solve for unknown material parameters that describe in vivo myocardial material behavior.

Algorithms↗

PubMed1995

Revascularization after acute myocardial infarction.

BACKGROUND: The optimal timing for coronary artery bypass grafting (CABG) after acute myocardial infarction (MI) remains controversial. METHODS: We examined our experience retrospectively in 3,942 patients who underwent CABG between 1986 and 1993, including 2,296 patients after acute MI. RESULTS: The operative mortality associated with increasing time intervals between MI and CABG were 9.1%, 8.3%, 5.2%, 6.5%, and 2.9%, for less than 6 hours, 6 hours to 2 days, 2 to 14 days, 2 to 6 weeks, and more than 6 weeks, respectively. In comparison, the operative mortality was 2.5% for patients with no history of acute MI. The incidence of permanent stroke and perioperative MI were greater and the length of postoperative hospitalization was longer for patients undergoing CABG early after MI. For patients undergoing operation electively, however, the operative mortality associated with increasing time intervals between MI and CABG were less, at 0.0%, 3.6%, 2.1%, 6.4%, and 2.1% for less than 6 hours, 6 hours to 2 days, 2 to 14 days, 2 to 6 weeks, and more than 6 weeks, respectively. For patients undergoing CABG within 14 days of MI, the operative mortality was 5.3% for those receiving an intraaortic balloon pump preoperatively for postinfarction angina, but 11.8% for those who underwent urgent/emergent operation without intraaortic balloon pump support. CONCLUSIONS: Elective CABG can be accomplished with acceptable morbidity and mortality early after acute MI if an elective operation is possible. In addition, the intraaortic balloon pump should be used aggressively in patients with postinfarction angina to allow for elective rather than urgent/emergent operation.

Adult↗

PubMed1994

An experimental method for evaluating constitutive models of myocardium in in vivo hearts.

A new experimental method for the evaluation of myocardial constitutive models combines magnetic resonance (MR) radiofrequency (RF) tissue-tagging techniques with iterative two-dimensional (2-D) nonlinear finite element (FE) analysis. For demonstration, a nonlinear isotropic constitutive model for passive diastolic expansion in the in vivo canine heart is evaluated. A 2-D early diastolic FE mesh was constructed with loading parameters for the ventricular chambers taken from mean early diastolic-to-late diastolic pressure changes measured during MR imaging. FE solution was performed for regional, intramyocardial ventricular wall strains using small-strain, small-displacement theory. Corresponding regional ventricular wall strains were computed independently using MR images that incorporated RF tissue tagging. Two unknown parameters were determined for an exponential strain energy function that maximized agreement between observed (from MR) and predicted (from FE analysis) regional wall strains. Extension of this methodology will provide a framework in which to evaluate the quality of myocardial constitutive models of arbitrary complexity on a regional basis.

Animals↗

PubMedDate not supplied

Hybrid DANTE and phase-contrast imaging technique for measurement of three-dimensional myocardial wall motion.

Characterization of myocardial stress and strain is necessary for a complete understanding of myocardial function. The precise quantification of regional myocardial strain is complicated by its time-varying pattern and regional variation resulting from the anisotropy of the myocardium and by complex torsional and shortening motions of the heart during the cardiac cycle. The authors have developed a technique for point-specific tracking of myocardial motion along all three axes in a constant selected section of myocardium by combining prospective section selection with in-plane DANTE (delays alternating with nutations for tailored excitation) tissue tagging and phase-contrast detection of motion perpendicular to the image plane. With this technique, it is possible to determine point-specific myocardial strain values in vivo.

Animals↗

PubMedDate not supplied

Ventricular interaction in the pathologic heart. A model based study.

The effects of direct ventricular interaction and interaction mediated by the pericardium on the diastolic left ventricle (LV) were quantified using idealized models of five pathologic conditions. Two-dimensional (2D) mathematical models were constructed in long and short axis views of four pathologic LV conditions and the normal heart (NL): dilated cardiomyopathy (DCM), concentric LV hypertrophy (HYP), chronic anterior-apical infarction in a normal shaped LV (CAINL), and CAI in a dilated LV (CAID). To assess the effects of RV pressure increase on the LV mechanical state, RV pressure was systematically increased for several LV pressures and changes in the LV diastolic pressure-area relationships, and LV free wall and septal principal stresses and strains were quantified. At higher RV pressures, with pericardial effects included in the models, the pressure-area relationship was similar for all models, indicating that, at these higher pressures, the effects of RV and pericardial pressures are more important than global LV shape, wall thickness, or material properties in determining the pressure-area relationship. There were significant differences among models in the changes in LV free wall and septal stress and strain after an increase in RV pressure. These models may be of use in predicting interaction in the corresponding clinical state.

Animals↗