Biomedical subjects

M L Torre

Publications and source records attributed to M L Torre.

11 recordsLinked to original sources

PubMed2002

Boar semen controlled delivery system: storage and in vitro spermatozoa release.

Swine spermatozoa were encapsulated in barium alginate and protamine-barium alginate membranes to lengthen their preservation time and to provide a means of controlling their release. Precocious acrosome reactions and secondary anomalies were measured as indices of semen quality. These characteristics were observed for two forms of encapsulated spermatozoa when stored at 18 and 38 degrees C for 24 h and for semen diluted in a classical extender at both temperatures. The results indicate that encapsulation enhances semen preservation, providing protection against membrane damage upon dilution. The effect is even more evident at the higher temperature (38 degrees C), where cell metabolism is higher. An in vitro release test of spermatozoa showed a massive cell delivery from barium alginate capsules within 6 h, and a slow release from protamine-barium alginate capsules. The properties of spermatozoa 24 h after release did not differ from the semen stored at the same temperature in capsules, indicating that the release process does not impair semen quality.

Alginates↗

PubMed2002

Boar semen controlled delivery system: analysis of batch seasonal variability.

A new encapsulation technology of swine semen is proposed to improve the quality of stored spermatozoa and to obtain the controlled release of viable cells, reducing the number of instrumental inseminations. This technology has been employed to produce barium alginate gel capsules in different seasons; an analysis of batch reproducibility was performed, and total capsule diameter, gel thickness and weight of capsules were determined as indices of batch properties. A seasonal variability was found but each batch was substantially homogeneous. The variability could be related to the biological variability of the semen employed as raw material as well as to the technological process.

Animals↗

PubMed2002

Barium alginate cell-delivery systems: correlation between technological parameters.

The most recent trends for the development of several in vitro cell cultures have been oriented towards the cell immobilisation in 3-dimensional scaffolds and cell encapsulation. In fact, an important requirement of cell survival is self-assembly in functional communities, in the presence of an artificial extracellular matrix. In our research, a previously described technique for spermatozoa encapsulation was applied to obtain capsules loaded with an opaque agent as a model, and to perform a formulative study. A process variable, barium ion concentration, was correlated to some capsule properties, such as weight, gel thickness, total and core diameter. Ion concentration can be modified to obtain capsules with predictable characteristics.

Alginates↗

PubMed2002

Dissolution behaviour of hydrophilic matrix tablets containing two different polyethylene oxides (PEOs) for the controlled release of a water-soluble drug. Dimensionality study.

Hydrophilic matrix tablets containing polyethylene oxides as the retarding polymer have been successfully employed in the controlled release of drugs. To evaluate the relative influence of drug diffusion and polymer erosion mechanisms in the drug delivery process, we studied the hydration behaviour of matrix tablets containing a water-soluble drug and PEOs of two different molecular weights: Polyox WSRN 1105 (Mw = 0.9 x 10(6)) and Polyox WSRN 301 (Mw = 4 x 10(6)). The hydration rate, the extent of swelling, and the erosion rate of matrices containing the polymer, the drug and tableting excipients were evaluated in comparison to tablets made of pure polymer. The results of these studies on function of the release behaviour were then discussed. The results show that the higher molecular weight PEO swells to a greater extent and tends to form, upon hydration, a stronger gel, which is therefore less liable to erosion, if compared to the lower molecular weight PEO. This difference in the erosion behaviour can explain the different efficiencies of the two polymeric products in modulating the delivery rate of the water-soluble drug. Moreover, the presence of other soluble components (drug and excipients) in the dosage form enhances the erosion trend of the tablets with a consequent reduction of the efficiency of the polymer in drug release control.

Biocompatible Materials↗

PubMed2000

Controlled release of swine semen encapsulated in calcium alginate beads.

A quick and successful encapsulation method of swine spermatozoa is described: hydroxypropylmethylcellulose and calcium chloride were added to the sampled ejaculate swine sperm (sperm-rich fraction: creamy white) and then this suspension was dropped into an aqueous solution of sodium alginate. In order to obtain different capsule thicknesses, different calcium chloride concentrations were used. The influence of different formulations on in vitro spermatozoa release behavior and on the mechanical properties has been studied. In vitro sperm kinetics (motility and average velocity) have been determined. The results obtained from motility and average velocity tests of treated seminal material are promising, especially if the difficulty of preservation of swine spermatozoa compared to bovine sperm is considered. The different membranes obtained from the different calcium concentrations have had an influence on mechanical properties and on the release profile of spermatozoa from the capsules, and therefore, it is possible to modulate the release rate of the cells.

Alginates↗

PubMed1999

Formulation of biphasic release tablets containing slightly soluble drugs.

A new biphasic release system for slightly soluble drugs has been proposed. To enhance the dissolution rate, the drug was milled with a superdisintegrant. Then, double-layer tablets were prepared. One layer was formulated to release the drug in a very short time (fast-release). The other consisted of an extended-release hydroxypropylmethylcellulose (HPMC) matrix. Different HPMC concentrations (10, 16 and 22%) and viscosity grades (Methocel K4, K15 and K100M) were used to obtain different release rates of the drug from the extended-release layer, ketoprofen and praziquantel were used as slightly soluble model drugs. The in vitro dissolution tests of the prepared double-layer systems, showed the desired biphasic behaviour: the drug contained in the fast releasing layer dissolved within the first 15 min, while the drug contained in the prolonged-release layer was released at different times, depending on the formulation of the hydrophilic matrix. In particular, an increase in the percentage and viscosity grade of HPMC, in the extended release layer, leads to a decrease in the drug delivery rate and produces a wide range of different release rates from only a few hours up to 24 h.

Chemistry, Pharmaceutical↗

PubMed1998

Formulation and characterization of calcium alginate beads containing ampicillin.

The purpose of this work was the preparation and characterization of calcium alginate beads containing ampicillin. Aqueous solutions of drug and sodium alginate (three viscosity grades) were added drop by drop to aqueous solutions of calcium chloride; the droplets instantaneously formed gel beads, which were then dried. Morphological studies and drug contents, in vitro release, and erosion tests were carried out for the characterization of the prepared beads. The dried particles were characterized by irregular shape and a smooth or rough surface, depending on the viscosity grade of the alginate used. The control of the drug for different time intervals depended on the molecular weight of the polymer used; however, the pH-change test showed that this capacity was much lower in the case of acid-treated particles. The results obtained show that the ampicillin beads prepared are suitable for intramammary therapy.

Alginates↗

PubMed1993

Press-coated tablets for time-programmed release of drugs.

A new dry-coated device for the release of drug after a programmable period of time is proposed. It is intended to be used mainly in the therapy of those diseases which depend on circadian rhythms. Some core formulations, characterized by different release rates and mechanisms (containing diltiazem hydrochloride or sodium diclofenac as model drugs), were coated by compression with different polymeric barrier layers (press-coated systems). The shell formulations tested contained either gellable or erodible polymers. The dissolution profiles of uncoated cores and press-coated devices were compared. The gellable and/or erodible characteristics (properties) of the barrier formulations were also examined by means of a penetrometer. The coatings prevent drug release from the core until the polymeric shell is completely eroded or swollen. This delay in release start is not influenced by the core composition and depends only on the shell formulation. Except for the time-lag, the release kinetics of the drug contained in the core are not significantly influenced by the presence of the erodible barrier, but can be widely modulated using a swellable polymeric shell.

Circadian Rhythm↗

PubMedDate not supplied

Follicle-like model by granulosa cell encapsulation in a barium alginate-protamine membrane.

Granulosa cells from bovine and porcine ovaries were cultured either in monolayer or in follicle-like barium alginate capsules for 6 days. Morphological investigation by electron scanning microscopy indicated that culture in a three-dimensional (3D) system allows self-organization of spherical-polyhedral shape cells. The luteinization index (progesterone:17beta-estradiol ratio) was significantly higher for monolayer cells than for the 3D cell culture system, confirming the results of morphological analysis and indicating more physiological growth. The encapsulated 3D culture system appears to be a promising way of obtaining in vitro maturation and development of follicles and oocytes.

Alginates↗

PubMedDate not supplied

Transient transfection of porcine granulosa cells after 3D culture in barium alginate capsules.

Three-dimensional culture systems in barium alginate capsules can be employed to maintain primary granulosa cells in an undifferentiated state for almost 6 days. This is due to a self-organization of cells in a pseudofollicular structure. The transfection of primary granulosa cells is a necessary condition when employing these culture systems for several purposes, for example as an in vitro toxicity test or the development of oocytes or zygotes. In this work, the feasibility of two transient transfection techniques (liposome-mediated and electroporation) was assessed in primary porcine granulosa cells after a 6-day culture in an artificial extracellular matrix (barium alginate membrane). Human recombinant green fluorescent protein was chosen as a molecular readout, and protein expression was assessed after 48 hours from transfection. Liposome-mediated transfection gave low transfection levels, with increasing yields from 2 to 12 microgDNA/ml of medium; the maximum percentage (85.7%) was reached at 12 microgDNA/ml of medium. Electroporation-mediated transfection yields were higher: the best results (81.7% of transfected cells) were achieved with two 50V pulses and 12 microg/ml DNA. The application of a single or double pulse (50V) at 4 mgDNA/ml gave negligible results. These results indicate that primary granulosa cell cultured in barium alginate capsules can be transfected by electroporation with high transfection yields.

Alginates↗

PubMedDate not supplied

Cellulose acetate trimellitate ethylcellulose blends for non-steroidal anti-inflammatory drug (NSAID) microspheres.

Ketoprofen (Ket), a non-steroidal anti-inflammatory drug, has been incorporated into polymeric micromatrices (microspheres) prepared by a spray drying process and made of cellulose acetate trimellitate (CAT)/ethylcellulose (EC) blends. Drug loaded microspheres were obtained by spray-drying organic solutions of the two polymers and the drug. Characterization of the microparticles (morphology, particle size distribution, drug content, yield of production, surface properties, solvent residues) was carried out and in-vitro release behaviour measured. The release rate of the drug diminished as the proportion of EC was raised.

Anti-Inflammatory Agents, Non-Steroidal↗