Biomedical subjects

M Lloréns

Publications and source records attributed to M Lloréns.

7 recordsLinked to original sources

PubMed2006

Removal of cadmium from aqueous solutions by adsorption onto orange waste.

The use of orange wastes, generated in the orange juice industry, for removing cadmium from aqueous solutions has been investigated. The material was characterized by Fourier transform infrared spectroscopy and batch experiments were conducted to determine the adsorption capacity of the biomass. A strong dependence of the adsorption capacity on pH was observed, the capacity increasing as pH value rose. Kinetics and adsorption equilibrium were studied at different pH values (4-6). The adsorption process was quick and the equilibrium was attained within 3h. The maximum adsorption capacity of orange waste was found to be 0.40, 0.41 and 0.43 mmol/g at pH 4-6, respectively. The kinetic data were analysed using various kinetic models - pseudo-first order equation, pseudo-second order equation, Elovich equation and intraparticle diffusion equation - and the equilibrium data were tested using four isotherm models - Langmuir, Freundlich, Sips and Redlich-Peterson. The data were fitted by non-linear regression and five error analysis methods were used to evaluate the goodness of the fit. The Elovich equation provides the greatest accuracy for the kinetic data and the Sips model the closest fit for the equilibrium data.

Adsorption↗

PubMed2005

Improvement of coagulation-flocculation process using anionic polyacrylamide as coagulant aid.

A physicochemical treatment (coagulation-flocculation) was applied to a slaughterhouse wastewater, using anionic polyacrylamide as coagulant aid to improve the settling velocity of the flocs formed with the coagulants used: ferric sulphate, aluminium sulphate and polyaluminium chloride. The optimum speed and stirring time for the flocculation stage were ascertained along with the optimum pH and coagulant and coagulant aid doses. The speed and coagulation time were initially set according to recommendations in the literature concerning the treatment of this type of water. Chemical oxygen demand (COD), biochemical oxygen demand at 5 days (BOD5) and total suspended solids (TSS) were recorded at the beginning and end of each experiment in order to monitor the process. Once the optimal conditions had been established, several parameters were measured in order to assess the coagulation-flocculation process: particle number and size, sludge volume, nutrients (ammonia nitrogen, total Kjeldahl nitrogen, albuminoid nitrogen, orthophosphate, total phosphorus) and the residual concentration of iron and aluminium in clarified water. Anionic polyacrylamide, when added with ferric sulphate or polyaluminium chloride led to a significant increase in the settling speed.

Acrylic Resins↗

PubMed2003

Microscopic observation of particle reduction in slaughterhouse wastewater by coagulation-flocculation using ferric sulphate as coagulant and different coagulant aids.

A coagulation-flocculation treatment has been applied to a slaughterhouse liquid effluent, using ferric sulphate as coagulant and activated silica, powdered activated carbon, cationic polyacrylamide, polyvinyl alcohol, polyacrylic acid and anionic polyacrylamide as coagulant aids in order to improve the settling time. Once the optimal conditions had been established (speed and time of stirring during flocculation step, pH, coagulant and coagulant aid doses), the efficiency of the coagulation-flocculation process was studied by comparing the particle size distribution before and after the addition of the coagulant. When ferric sulphate was used without the coagulant aids, particle removal efficiency varied with size, although overall efficiency was quite substantial (87%). The use of coagulant aids improved the removal efficiency, except in the case of activated silica, when it fell to 78%. In all other cases removal efficiency values between 93% (for polyvinyl alcohol) and 99% (for anionic polyacrylamide) were reached.

Abattoirs↗

PubMed2002

Nutrient removal and sludge production in the coagulation-flocculation process.

Nutrient removal and sludge production in the coagulation-flocculation process, applied to a slaughterhouse effluent, have been studied. Fe2(SO4)3, Al2(SO4)3 and polyaluminium chloride were used as coagulants. Inorganic products were used as coagulant aids: activated silica, powdered activated carbon and precipitated calcium carbonate and synthetic polyelectrolytes: cationic polyacrylamide, polyacrilic acid, anionic polyacrylamide and polyvinyl alcohol. Performances were measured under optimum conditions for the products used. They were found after studying the different variables which influence the process. Phosphorus removal is very high (approximately 100% for the orthophosphate and between 98.93% and 99.90% for the total phosphorus). Ammonia nitrogen removal is very low although appreciable performances are observed for albuminoid nitrogen (73.9-88.77%). The use of coagulant aids reduces the volume of the sludge produced up to 41.6%.

Abattoirs↗

PubMed1999

Generalization of the theory of transition times in metabolic pathways: a geometrical approach.

Cell metabolism is able to respond to changes in both internal parameters and boundary constraints. The time any system variable takes to make this response has relevant implications for understanding the evolutionary optimization of metabolism as well as for biotechnological applications. This work is focused on estimating the magnitude of the average time taken by any observable of the system to reach a new state when either a perturbation or a persistent variation occurs. With this aim, a new variable, called characteristic time, based on geometric considerations, is introduced. It is stressed that this new definition is completely general, being useful for evaluating the response time, even in complex transitions involving periodic behavior. It is shown that, in some particular situations, this magnitude coincides with previously defined transition times but differs drastically in others. Finally, to illustrate the applicability of this approach, a model of a reaction mediated by an allosteric enzyme is analyzed.

Allosteric Regulation↗

PubMed1997

Transient times in linear metabolic pathways under constant affinity constraints.

In the early seventies, Easterby began the analytical study of transition times for linear reaction schemes [Easterby (1973) Biochim. Biophys. Acta 293, 552-558]. In this pioneer work and in subsequent papers, a state function (the transient time) was used to measure the period before the stationary state, for systems constrained to work under both constant and variable input flux, was reached. Despite the undoubted usefulness of this quantity to describe the time-dependent features of these kinds of systems, its application to the study of chemical reactions under other constraints is questionable. In the present work, a generalization of these magnitudes to linear metabolic pathways functioning under a constant-affinity constraint is carried out. It is proved that classical definitions of transient times do not reflect the actual properties of the transition to the steady state in systems evolving under this restriction. Alternatively, a more adequate framework for interpretation of the transient times for systems with both constant and variable input flux is suggested. Within this context, new definitions that reflect more accurately the transient characteristics of constant affinity systems are stated. Finally, the meaning of these transient times is discussed.

Kinetics↗

PubMed1996

The metabolic productivity of the cell factory.

It is widely accepted that some performance function has been optimized during the evolution of metabolic pathways. One can study the nature of such a function by analogy with the industrial manufacturing world, in which there have been efforts over recent decades to optimize production chains, and in which it is now accepted that fluxes are not the only important system variables that determine process efficiency, because inventory turnover must also be considered. Inspired by the parallels between living cells and manufacturing factories, we propose that fluxes and transit time may have simultaneously been major targets of natural selection in the optimization of the design, structure and kinetic parameters of metabolic pathways. Accordingly we define the ratio of flux to transit time as a performance index of productivity in metabolic systems: it measures the efficiency with which stocks are administered, and facilitates comparison of a pathway in different steady states or in different tissues or organisms. For a linear chain of two enzymes, at a fixed total equilibrium constant, we have analysed the variation of flux, transit time and productivity index as functions of the equilibrium constants of the two steps. The results show that only the productivity index has a maximum, which represents a good compromise in optimizing flux and transit time. We have extended control analysis to the productivity index and derived the summation theorem that applies to it. For linear chains of different length with maximum productivity index values, the distribution of control coefficients with regard to the three parameters has a characteristic profile independent of the length of the chain. Finally, this control profile changes when other variables are optimized, and we compare the theoretical results with the control profile of the first steps of glycolysis in rat liver.

Animals↗