PubMed Health⌕ Search

Biomedical subjects

M M Alves

Publications and source records attributed to M M Alves.

At least 19 recordsLinked to original sources
PubMed2006

Anaerobic co-digestion of coffee waste and sewage sludge.

The feasibility of the anaerobic co-digestion of coffee solid waste and sewage sludge was assessed. Five different solid wastes with different chemical properties were studied in mesophilic batch assays, providing basic data on the methane production, reduction of total and volatile solids and hydrolysis rate constant. Most of the wastes had a methane yield of 0.24-0.28 m3 CH4(STP)/kg VS(initial) and 76-89% of the theoretical methane yield was achieved. Reduction of 50-73% in total solids and 75-80% in volatile solids were obtained and the hydrolysis rate constants were in the range of 0.035-0.063 d(-1). One of the solid wastes, composed of 100% barley, achieved a methane yield of 0.02 m3 CH4(STP)/kg VS(initial), reductions of 31% in total solids, 40% in volatile solids and achieved only 11% of the theoretical methane yield. However, this waste presented the highest hydrolysis rate constant. Considering all the wastes, an inverse linear correlation was obtained between methane yield and the hydrolysis rate constant, suggesting that hydrolysis was not the limiting factor in the anaerobic biodegradability of this type of waste.

Anaerobiosis↗
PubMed2006

Knowledge-based fuzzy system for diagnosis and control of an integrated biological wastewater treatment process.

A supervisory expert system based on fuzzy logic rules was developed for diagnosis and control of a laboratory- scale plant comprising anaerobic digestion and anoxic/aerobic modules for combined high rate biological N and C removal. The design and implementation of a computational environment in LabVIEW for data acquisition, plant operation and distributed equipment control is described. A step increase in ammonia concentration from 20 to 60 mg N/L was applied during a trial period of 73 h. Recycle flow rate from the aerobic to the anoxic module and bypass flow rate from the influent directly to the anoxic reactor were the output variables of the fuzzy system. They were automatically changed (from 34 to 111 L/day and from 8 to 13 L/day, respectively), when new plant conditions were recognised by the expert system. Denitrification efficiency higher than 85% was achieved 30 h after the disturbance and 15 h after the system response at an HRT as low as 1.5 h. Nitrification efficiency gradually increased from 12 to 50% at an HRT of 3 h. The system proved to react properly in order to set adequate operating conditions that led to timely and efficient recovery of N and C removal rates.

Ammonia↗
PubMed2005

Anaerobic biodegradation of oleic and palmitic acids: evidence of mass transfer limitations caused by long chain fatty acid accumulation onto the anaerobic sludge.

Palmitic acid was the main long chain fatty acids (LCFA) that accumulated onto the anaerobic sludge when oleic acid was fed to an EGSB reactor. The conversion between oleic and palmitic acid was linked to the biological activity. When palmitic acid was fed to an EGSB reactor it represented also the main LCFA that accumulated onto the sludge. The way of palmitic acid accumulation was different in the oleic and in the palmitic acid fed reactors. When oleic acid was fed, the biomass-associated LCFA (83% as palmitic acid) were mainly adsorbed and entrapped in the sludge that became "encapsulated" by an LCFA layer. However, when palmitic acid was fed, the biomass-associated LCFA (the totality as palmitic acid) was mainly precipitated in white spots like precipitates in between the sludge, which remained "non-encapsulated." The two sludges were compared in terms of the specific methanogenic activity (SMA) in the presence of acetate, propionate, butyrate, and H(2)CO(2), before and after the mineralization of similar amounts of biomass-associated LCFA (4.6 and 5.2 g COD-LCFA/g of volatile suspended solids (VSS), for the oleic and palmitic acid fed sludge, respectively). The "non-encapsulated," sludge exhibited a considerable initial methanogenic activity on all the tested substrates, with the single exception of butyrate. However, with the "encapsulated" sludge only methane production from ethanol and H(2)/CO(2) was detected, after a lag phase of about 50 h. After mineralization of the biomass-associated LCFA, both sludges exhibited activities of similar order of magnitude in the presence of the same individual substrates and significantly higher than before. The results evidenced that LCFA accumulation onto the sludge can create a physical barrier and hinder the transfer of substrates and products, inducing a delay on the initial methane production. Whatever the mechanism, metabolic or physical, that is behind this inhibition, it is reversible, being eliminated after the depletion of the biomass-associated LCFA.

Acetates↗
PubMed2005

Primary breast lymphoma.

OBJECTIVES: Retrospective evaluation of the clinical behavior, treatment and prognosis in five cases of primary breast lymphoma. METHODS: From 1999 to 2003, five patients with primary breast lymphoma were diagnosed in our department. RESULTS: Primary breast lymphoma (PBL) was diagnosed in five patients, whose median age was 63.4 (41-79) years. In four out of five patients, a diagnosis of lymphoma was made after the evaluation of a palpable breast mass measuring 1.5 to 6 cm. All of them were classified as non-Hodgkin's B cell lymphomas and three of five cases were diffuse large cell lymphomas. All patients were submitted to chemotherapy; in only one patient was surgery performed. CONCLUSIONS: A relatively high rate of PBL was observed in our department compared with other oncology centers. Beyond its scarce appearance, PBL is very difficult to distinguish from primary breast carcinoma. Histology remains the major diagnostic tool.

Adult↗
PubMed2004

Mineralization of LCFA associated with anaerobic sludge: Kinetics, enhancement of methanogenic activity, and effect of VFA.

Long-chain fatty acids (LCFA) associated with anaerobic sludge by mechanisms of precipitation, adsorption, or entrapment can be biodegraded to methane. The mineralization kinetics of biomass-associated LCFA were established according to an inhibition model based on Haldane's enzymatic inhibition kinetics. A value around 1,000 mg COD-LCFA..g VSS(-1) was obtained for the optimal specific LCFA content that allowed the maximal mineralization rate. For sludge with specific LCFA contents of 2,838 +/- 63 and 4,571 +/- 257 mg COD-LCFA..g VSS(-1), the specific methanogenic activities in the presence of acetate, butyrate, and H(2)/CO(2) were significantly enhanced after the mineralization of the biomass-associated LCFA. For sludge with a specific LCFA content near the optimal value defined by the kinetic model, the effect of adding VFA to the medium was studied during the mineralization of the biomass-associated LCFA. Different patterns were obtained for each individual substrate. Acetate and butyrate were preferentially consumed by the consortium, but in the case of propionate no evidence of a sequential consumption pattern could be withdrawn. It was concluded that LCFA do not exert a bactericidal neither a permanent toxic effect toward the anaerobic consortia. A discussion is addressed to the relative roles of a reversible inhibitory effect and a transport limitation effect imposed by the LCFA surrounding the cells.

Bacteria, Anaerobic↗
PubMed2004

Development of image analysis techniques as a tool to detect and quantify morphological changes in anaerobic sludge: II. Application to a granule deterioration process triggered by contact with oleic acid.

Image analysis techniques are applied to monitor the morphological changes in granular sludge present in an expanded granular sludge blanket (EGSB) reactor fed with oleic acid. Deterioration of granular sludge was monitored along the trial period by measuring the percentage of aggregates smaller than 1 mm (in terms of Feret diameter) either in terms of projected area or in terms of number of aggregates. A good correlation was obtained between these values and the percentage of aggregates smaller than 1 mm were physically sorted and quantified by the volatile suspended solid content. The ratio of total filaments length to cross-sectional area of aggregates defined as LfA, was applied to quantify the dispersion level of the granular sludge, which increased until day 141 and remained almost invariant afterwards. LfA was sensitive to the sludge deterioration process and was able to indicate, with the anticipation of about 1 month, the most significant biomass washout episode that occurred in the trial period. A mechanism of filaments' release, detachment and selective washout was proposed to explain the action of LfA from this viewpoint. The equivalent diameter of the bottom aggregates larger than 1 mm increased with the increase on the amount of long chain fatty acids associated with the biomass by mechanisms of adsorption, precipitation, or entrapment. After a threshold value of about 200 mg COD-LCFA gVSS (COD = chemical oxygen demand; LCFA = long chain fatty acids; VSS = volatile suspended solids), a migration of granular sludge from the bottom to a top-floating layer was evident.

Anaerobiosis↗
PubMed2004

Development of image analysis techniques as a tool to detect and quantify morphological changes in anaerobic sludge: I. Application to a granulation process.

Image analysis techniques were developed and applied to quantify the process of anaerobic granulation in an expanded granular sludge blanket reactor (EGSB) fed with a synthetic substrate based on glucose [60-30% COD (chemical oxygen demand)] and volatile fatty acids (40-70% COD) over 376 days. In a first operation period that lasted 177 days, the aggregation of dispersed sludge was quantitatively monitored through the recognition and quantification of aggregates and filaments. A parameter defined as the ratio between the filaments' length and the aggregates projected area (LfA) has proven to be sensitive to detect changes in the aggregation status of the anaerobic sludge. The aggregation time-defined as the moment when a balance between filaments' length and aggregates' size was established-was recognized through the LfA. The percentage of projected area of aggregates within three size ranges (0.01-0.1 mm, 0.1-1 mm, and >1 mm, equivalent diameter) reflected the granular size spectrum during the aggregation process. When sudden increases on the upflow velocity and on the organic loading rate were applied to the previously formed granules, the developed image analysis techniques revealed to be good indicators of granular sludge stability, since they were sensitive to detected filaments release, fragmentation, and erosion that usually leads to washout. The specific methanogenic activities in the presence of acetate, propionate, butyrate, and H(2)/CO(2) increased along the operation, particularly relevant was the sudden increase in the specific hydrogenophilic activity, immediately after the moment recognized as aggregation time.

Algorithms↗
PubMed2004

Chemical, physical, and sensorial characteristics of "Terrincho" ewe cheese: changes during ripening and intravarietal comparison.

The objectives of this study were to monitor the changes in chemical [moisture, acidity, pH, and water activity (a(w))] and physical (color and texture) parameters of "Terrincho" ewe cheese during 60 d of ripening, and to determine the correlations between the changes in instrumental texture and color parameters and the ripening time of the product. Intravarietal comparison of Terrincho ewe cheese from 5 different dairy plants was performed by evaluation of mechanical parameters from texture profile analysis (TPA) and color parameters in terms of CIELAB color space (L*, a*, and b*). In addition to mechanical and color tests, composition analyses and sensory tests were performed. The results were evaluated with statistical methods (single valued and multivariate analysis). During the first 20 d of ripening, an increase in hardness, fracturability, gumminess, chewiness, and yellowness occurred. Simultaneously, adhesiveness, resilience, L* (inside cheese, "i" and external "e"), and cohesiveness decreased. After 20 d of ripening hardness, fracturability, gumminess, and chewiness decreased and cohesiveness increased. The ripening time of Terrincho cheeses can be estimated with 6 variables: L* (external, e), L* (i), b* (inside cheese, i), hardness, a* (i), chewiness, and a constant. The estimation error was 4.2 d. Evaluation of composition, pH, texture profile analyses, color, and related sensory characteristics of Terrincho cheeses from 5 different dairy plants (with 30 d of ripening) revealed correlations between these parameters.

Analysis of Variance↗
PubMed2003

Image analysis, methanogenic activity measurements, and molecular biological techniques to monitor granular sludge from an EGSB reactor fed with oleic acid.

Morphological changes in anaerobic granular sludge fed with increasing loads of oleic acid were quantified by image analysis. The combination of this technique with data on the accumulation of adsorbed long chain fatty acid and with the molecular characterization of microbial community gave insight into the mechanisms of sludge disintegration, flotation and washout. It was found that the bacterial domain was more affected than the archaeal domain during this process. However, no acetoclastic activity and onlya residual hydrogenotrophic activity were detected in the sludge at the end of the operation.

Adsorption↗
PubMed2003

Accumulation of long chain fatty acids onto anaerobic sludge under steady state and shock loading conditions: effect on acetogenic and methanogenic activity.

Accumulation of substrate onto the biomass was quantified under steady-state and shock conditions in a fixed bed reactor fed with an oleic acid-based synthetic effluent. The accumulation of substrate onto the sludge was more dependent on oleic acid concentration than on oleic acid loading rate and decreased the acetogenic, acetoclastic and hydrogenophilic activity. However, even when the methanogenic activity measurements indicate a severe inhibition, the anaerobic sludge was able to methanise efficiently the accumulated substrate that was mainly adsorbed LCFA. Methanogenic activity measurements for a sludge loaded with 2,861 mg COD/gVSS as LCFA, revealed that only hydrogenophilic activity was detected, whereas the methanogenic activities with acetate, propionate and butyrate as substrates were null. However the methanogenic activity of the same sludge after allowing the depletion of the adsorbed LCFA were significantly enhanced in the presence of all substrates, except in propionate. A discussion about the relative importance of metabolic inhibition and transport limitations for the anaerobic degradation of LCFA is launched.

Bacteria, Anaerobic↗
PubMed2002

Anaerobic degradation of oleic acid by suspended and granular sludge: identification of palmitic acid as a key intermediate.

The aim of the present work was to study the maximum potential methane production in batch assays of sludge samples taken along the operation of two EGSB reactors (RI inoculated with granular sludge and RII inoculated with suspended sludge) fed with increasing oleic acid concentrations between 2 and 8 gCOD/l (HRT = 1 day). After removing the residual substrate, the sludge was incubated in batch vials without any added carbon source. A maximum methane production rate of 152+/-21 mlCH4(STP)/gVS.day was obtained for the suspended sludge taken on day 70, when oleate at a concentration of 2 g COD/l was fed with a co-substrate (50% COD). The maximum plateau achieved in the methane production curve was 1145+/-307 mlCH4(STP)/gVS, obtained for the suspended sludge taken on day 162, when oleate was fed as the sole carbon source at 6 g COD/I. The methanization rate of the adsorbed substrate was enhanced under stirring conditions and was inhibited by adding oleic acid. Extraction and GC analysis confirmed that the main adsorbed substrate was palmitate, and not oleate. Accumulated palmitate adsorbed onto the sludge and further beta-oxidation was inhibited when in the presence of oleic acid. If oleic acid was removed from the medium beta-oxidation proceeded with methane production. Suspended sludge was more efficient than granular sludge.

Adsorption↗
PubMed2001

Effect of lipids and oleic acid on biomass development in anaerobic fixed-bed reactors. Part I: Biofilm growth and activity.

Two similar anaerobic fixed-bed bioreactors which allowed the biomass to be periodically withdrawn were run in parallel. After feeding each digester with synthetic dairy wastes of different lipid content (Period I), both digesters were fed with increasing sodium oleate concentrations with skim milk as co-substrate (Period II) and oleate as the sole carbon source (Period III). In Period I, the digester fed with lipids was more efficient and exhibited lower levels of volatile fatty acids than the digester fed without lipids. The biofilm built up in the presence of lipids was thinner, but more resistant to the presence of oleate than the biofilm formed in the absence of lipids, which lost 53% of its solids after contacting with oleic acid. The specific methanogenic activity with butyrate as substrate was enhanced in the presence of lipids, but no significant effect was detected on the acetoclastic and hydrogenophilic activities, which remained similar for both digesters along the trial period.

Anaerobiosis↗
PubMed2001

Effects of lipids and oleic acid on biomass development in anaerobic fixed-bed reactors. Part II: Oleic acid toxicity and biodegradability.

Oleic acid toxicity and biodegradability were followed during long-term operation of two similar anaerobic fixed-bed units. When treating an oleate based effluent, the sludge from the bioreactor that was acclimated with lipids during the first operation period, showed a higher tolerance to oleic acid toxicity (IC50 = 137 mg/l) compared with the sludge fed with a non-fat substrate (IC50 = 80 mg/l). This sludge showed also the highest biodegradation capacity of oleic acid, achieving maximum methane production rates between 33 and 46 mlCH4(STP)/gVS.day and maximum percentages of methanization between 85 and 98% for the range of concentrations between 500 and 900 mg oleate/l. When oleate was the sole carbon source fed to both digesters, the biomass became encapsulated with organic matter, possibly oleate or an intermediate of its degradation, e.g. stearate that was degraded at a maximum rate of 99 mlCH4(STP)/gVS.day. This suggests the possibility of using adsorption-degradation cycles for the treatment of LCFA based effluents. Both tolerance to toxicity and biodegradability of oleic acid were improved by acclimatization with lipids or oleate below a threshold concentration.

Biodegradation, Environmental↗
PubMed2000

Phase equilibria and mechanical properties of gel-like water-gelatin-locust bean gum systems.

The establishment of phase equilibrium in aqueous gelatin-locust bean gum (LBG) systems in the process of cooling from 313 to 291 K in specific conditions, passes ahead of the gelation process(.) This allows the suggestion that macrostructure and mechanical properties of the system can be predicted on the basis of knowledge of its phase diagram, obtained for the liquid gelatin-LBG systems comprising gelatin molecular aggregates. Textural and rheological analysis of gel-like gelatin-LBG systems demonstrate the effect of two factors determining their mechanical properties and acting opposite each other when the concentration of LBG in the system increases: concentration of gelatin by LBG in the process of phase separation, and decrease in the density of the gel network.

Galactans↗
PubMed1999

The effect of phase viscosity ratio on the rheology of liquid two phase gelatin-locust bean gum systems.

The rheological behaviour of liquid two phase gelatin-locust bean gum (LBG) systems, comprising of (a) liquid LBG enriched continuous phase, and (b) flow-deformable gelatin-enriched dispersed particles seems to be determined, at the same phase composition, by phase viscosity ratio (mu). In the mu range from 0.03 to 0.21, viscosity dropped to values noticeably lower (13-40 times) than those of the corresponding LBG solution. Decrease in the viscosity of the mixtures was not observed at mu = 0.5-0.6, corresponding that to the maximum energy scatter inside the droplets, in agreement with Mason's conception of droplet deformation and disruption of liquid Newtonian emulsions.

Galactans↗
PubMed1994

Correlation between clinical, electromyographic and dysautonomic evolution of familial amyloidotic polyneuropathy of the Portuguese type.

To assess the correlation between the severity of clinical symptoms and sensorymotor and autonomic function in familial amyloidotic polyneuropathy of the Portuguese type (FAP-PT), clinical grade (CG), electromyographic score (ES), sympathetic (SS) and parasympathetic score (PS) were compared in 47 patients. SS and PS were both abnormal in 72% of patients with ES = 0% and in 73% of patients with CG = 0. When SS and PS were compared with either CG and ES, PS progressed more rapidly and stabilized earlier than SS. As a whole, SS and PS were greater as CG and ES were higher. This pattern of autonomic involvement should be taken into account when assessing the course of the disease and evaluating new forms of therapy.

Adult↗
PubMed1990

Magnetic resonance imaging in motor neuron disease.

Magnetic resonance imaging (MRI) of the brain was evaluated in 20 patients with motor neuron disease (MND) and in a control group of 11 healthy people. Bilateral increased signal areas of various sizes in the centrum semiovale, corona radiata, internal capsule, pedunculi of midbrain, pons, medulla and even in the frontal lobe, topographically related with the corticospinal tract, were found in 8 out of 20 patients. Three out of 4 patients with progressive bulbar paralysis and 5 out of 11 cases of amyotrophic lateral sclerosis had abnormal MRI. Such MRI abnormalities have neither been found in patients with progressive muscular atrophy nor in controls, suggesting that they may be the hallmark of pyramidal tract degeneration in motor neuron disease.

Adult↗