Biomedical subjects

M Mattioli-Belmonte

Publications and source records attributed to M Mattioli-Belmonte.

16 recordsLinked to original sources

PubMed2006

Resin-based dentin restorative materials under accelerated ageing: bio-functional behavior.

OBJECT: The aim of the present study was the evaluation of the effect of different polishing and finishing procedures on Filtek Z250 FZ ESPE restorative material. Particularly, the consequence of artificial aging (UV-irradiation) on this resin-based dental material was investigated determining also its outcome on cell behavior. METHODS: 96 specimens of restorative material were prepared using a light emitting diode curing unit and randomly divided into four finishing and polishing groups: (I) No treatment (FZ); (II) Identoflex rubbers (ID); (III) Enhance System (EN) and (IV) Sof-Lex Pop-on XT discs (SF). The surface morphology of native and artificially aged materials was assessed with Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM). FTIR and biological (biocompatibility and bacterial adhesion) analyses were also performed. RESULTS: Among all, the ID procedure represented an acceptable compromise for efficiency of polymerization and biocompatibility both before and after artificial ageing. SF and EN techniques showed better interactions with the biological environment. CONCLUSION: UV artificial ageing of the tested specimens has shown an acceleration of the surface degrading processes, favoring a possible decrease in the mechanical properties and the release of toxic free radicals. Finishing and polishing procedure seemed to affect the photodegrading pathways, even though no differences among the techniques were observed. As the cytotoxicity of materials undergoing accelerated aging is relevant, further improvement of dental restorative materials are required to limit the long-term biological damage.

Animals↗

PubMed2006

In vitro evaluation of bio-functional performances of Ghimas titanium implants.

Titanium is the most widely used material for dental implants. The natural formation, in presence of oxygen, of different oxide films (passivation films) is correlated to titanium implant biocompatibility, resistance to corrosion and is responsible for implant bacteriostatic action. Surface roughness is another surface property of Ti-implants that, affecting implant-to-bone contact, improves integration. In the present study data concerning composition, surface roughness and biocompatibility of Ghimas implants and mini-implants undergoing sandblasting with Calcium Magnesium Carbonate (CaMg(CO3)2) are reported. AFM, SEM/EDX, XRD analyses and morpho-functional tests (MTT and ALP) were performed. Cell actin cytoskeletal modification (fluorescence phalloidin staining) was also observed with confocal laser microscopy (CLSM). Data related to surface geometry and chemical properties, associated with evidence of high purity of all the tested materials (XRD and EDX), highlighted the elevated biocompatibility of tested implants and mini-implants. CLSM investigation confirmed osteoblast features of an active cell behavior able to fit cell to chemico-mechanical stimuli present at the bone/implant interface and suggests an effective implant/alveolar bone integration in vivo.

Biocompatible Materials↗

PubMed2005

HA/alginate hybrid composites prepared through bio-inspired nucleation.

Poorly crystalline apatite has been directly nucleated on self-assembling alginate chains by neutralization synthesis to obtain a biomimetic artificial bone-like composite. It has been observed that in preparing HA/alginate composites, Ca2+ ions present on the apatitic surface cross-link the alginate chains to produce a material with different morphology and thermal stability, both functions of the HA/alginate weight ratio. In vitro tests were performed on different samples in terms of both the HA/alginate ratio and synthesis temperature. All the samples were cultured for seven days with MG63 osteoblast-like cells and then underwent morphological and biochemical analyses (MTT and ALP tests). Scaffolds showed a different solubility into the culture media, which was related to the temperature of synthesis and to the HA/alginate ratio. All our data confirm the ability of the tested materials to favour cell growth and to maintain their osteoblastic functionality, at least during the examined period.

Alginates↗

PubMed2005

Cell dynamics in the correct control of bone metabolism using natural treatments.

The present study was undertaken in order to assess the efficacy of a commercial product containing calcium and silicon (Osteosil-Calcium) on cell metabolism. MG-63 osteblast-like cells were cultured in the presence of three different drug concentrations (10, 5 and 2.5 microg/mL). Either serum-free culture and standard culture with serum were investigated. Morpho-functional tests (MTT and ALP), scanning electron microscopy (SEM), microanalysis (EDAX) and time-lapse video microscopy were performed. Cell actin cytoskeletal modification with fluorescence phalloidin staining was also tested. Our data show the in vitro functional efficacy of Osteosil-Calcium on MG63 cell viability and ALP production. This study demonstrates its positive effect on the metabolism of the single cell and suggests wider uses of this drug in health protection and or in Regenerative Medicine therapies which are currently applied to the elderly.

Analysis of Variance↗

PubMed2003

Exploring the damage limitation possibilities of mineral fibres for future integrated solutions: an in vitro study.

Owing to their possible carcinogenic effect, asbestos and other silica derivatives have been identified as priority substances for risk reduction and prevention of pollution. Neutralisation procedures have thus become a topical research subject in many European and American countries. In the present study, silica derivatives (asbestos-containing and asbestos substitutes like slag wool, rock wool, cement asbestos) were fully impregnated with an epoxy resin according to the procedure used for the in situ impregnation with viscous polymeric media, which penetrate and cement the fibres in place and reduce the risk of their dispersion in air. Untreated and treated samples were used to investigate their in vitro interaction with a human continuous epithelial cell line (NCTC 2544 keratinocytes) and test the resin's efficiency in passivating the surface activity of the fibrous particulate. SEM and morpho-quantitative data evidenced that impregnation with the epoxy resin modifies the mineral fibres' bioactivity (reduction of cell adhesion and decreased spread/round cell ratio) and demonstrated the value of in vitro cell testing after passivation as a risk-assessment procedure. These tests could be used for the rapid determination of the level of passivation of new synthetic mineral fibrous materials subjected to resin impregnation.

Air Pollutants, Occupational↗

PubMed2003

Tailoring biomaterial compatibility: in vivo tissue response versus in vitro cell behavior.

Biocompatibility relies essentially on surface phenomena, represented by cell-cell, cell-material and material (polymer)-protein interactions. An in vivo and in vitro experimental investigation was carried out on the biomaterials of two different classes with a good potential for in situ utilisation. Non-resorbable (Polypyrrole, Polyaniline, Polyimide) and resorbable (PLLA-PDXO-PLLA) materials for tissue engineering were studied for their overall tissue tolerance and cellular interactions. These non-resorbable polymers conceived for biosensor applications and implantable drug-delivery systems are intrinsically conductive. The PLLA-PDXO-PLLA triblock copolymer showed interesting tensile properties for bone and cartilage tissue engineering due to the presence of 1,5-dioxepan-2-one. In vitro and in vivo parallel studies showed an interesting correspondence: a) the cells in contact with the resorbable material that appeared to be capable of migratory-regenerative aspects in vitro exhibited good compatibility in vivo; whereas b) the non-resorbable materials, which are designed to remain in situ in vivo, were seen to have the potential to represent an adverse factor (inflammation, fibrotic reactions) that correlated with some aspects of cell behaviour in vitro.

Absorbable Implants↗

PubMed2002

Fabricated hyalS micropatterns and surface guidance of NCTC 2544 continuous cell line: an in vitro study.

Surface topography is important in establishing tissue organisation adjacent to implants, smooth surfaces generally being associated with fibrous encapsulation. By virtue of its large hydrated molecular volume and its capacity to form molecular matrix, hyaluronic acid can expand the interfibrillar collagen spaces to allow the movement of cells, although it can also hamper their locomotion. Low molecular-weight hyaluronan can also stimulate cell proliferation, especially at low concentrations. The aim of the present work was to evaluate in vitro the growth and migratory behaviour of NCTC 2544 keratinocytes cultured on different materials microstructured with hyaluronic acid or sulfated hyaluronic acid to assess the possibility of using these devices in the repair process of soft tissues. Ultrastructural morphological analyses, morphometric evaluations and detection of cytoskeletal elements were performed. Our observations provide evidence that micrometer-size parallel grooves of hyaluronic acid can influence cell growth behaviour since cells seeded onto the microstructured substrate arranged themselves according to a shape and an orientation that clearly reflected the chemotropism exerted on them by the two forms of acid. These data also highlight the importance of accurate microtexture fabrication. We intend to follow up these in vitro studies with in vivo experimental applications using PET and gelatin substrates structured with HyalS to evaluate wound healing responses, and to extend our investigations of the cytoskeletal modifications induced by different microstructures.

Adjuvants, Immunologic↗

PubMed1999

Biochemistry, histology and clinical uses of chitins and chitosans in wound healing.

Biodegradability, biocompatibility and capacity to promote the synthesis of hyaluronan are main characteristics of chitin-derived wound healing materials, whose biological significance in the human body depends largely on the actions that certain hydrolases exert on them. The resulting chitooligomers stimulate various cells, while the released monomers are phosphorylated and incorporated into hyaluronan, keratan sulphate and chondroitin sulphate, components of the intracellular matrix and connective tissue. The healing process favoured by these materials is examined in terms of macrophage activation, cytokine production by macrophages and fibroblasts, antiinflammatory action, angiogenesis stimulation, granulation and scar formation. Current biomedical applications are illustrated by the treatment of leg ulcers, the use of skin substitutes, and the regeneration of bone, nerve and meniscus tissues.

Biocompatible Materials↗

PubMed1999

N,N-dicarboxymethyl chitosan as delivery agent for bone morphogenetic protein in the repair of articular cartilage.

Bone morphogenetic protein (BMP), associated with N,N-dicarboxymethyl chitosan, is used to induce or facilitate the repair of articular cartilage lesions. This association is intended for the synergistic potentiation of the respective biological effects. Data show that BMP-7 enhances the in vivo proliferation of cells with chondrocytes phenotype in the articular environment, leading to partial healing of the articular surface of the lesions. N,N-dicarboxymethyl chitosan is found to be useful as a molecular carrier or drug delivery agent.

Animals↗

PubMed1999

In vitro and in vivo assessment of bone-implant interface: a comparative study.

The present in vitro and in vivo comparison of three bioactive (HA, AP40, RKKP) and three bioinert (Ti6-Al4-V, Al2O3, ZrO2) materials was undertaken to identify which of them provide(s) the most suitable coating for prostheses implanted in patients with altered metabolic status. The experimental design included in vitro tests with human osteoblasts and morphological observations by scanning electron microscopy. For the in vivo evaluation, the materials were implanted in the femoral condyle of ovariectomised and intact female rats, and two months after surgery an X-ray microanalytical study was performed. The in vitro study showed good biocompatibility with all materials. Microanalysis evidenced a similar behaviour with all materials except the two biological glasses. The differences in Ca and P content observed between intact and ovariectomised rats can be explained by the intrinsic capability of biological glasses to undergo surface modifications in the presence of alterations of the bone metabolism. Thus, their use seems to be indicated in recipients with osteoporotic pathologies.

Animals↗

PubMed1998

Study of the interface reactions between cells and a biocompatible ceramic.

Preliminary results on the modifications induced by the growth of a Chinese Hamster Ovary (CHO) cell line on the surface of a CORD 1014 ceramic cordierite are reported. Results proved that cells strongly modify the crystallography and the chemical composition of the surface and near surface regions of the cordierite.

Animals↗

PubMed1997

An experimental study in X-ray spectroscopy of the zirconium (Ca-PSZ) - bone interface. Microanalytic evaluation of the osteogenetic response.

Ultrastructural difractometric and chemical evaluations of calcium partially stabilized zirconium (Ca-PSZ) implants were performed in an in vivo study on animals in order to evaluate its biological behaviour. The chemical-morphological investigations demonstrated the presence of an osteogenetic activity at the bone-biomaterial interface. The new-osteogenesis was preceded by the formation of a loose connective tissue around the implants. This mesenchymal-type tissue without a capsular organization, allowing modulation of the mechanical forces to which the implant is subject, could be considered a positive event in the osteogenetic process and not a sign of future failure of the implant. Finally, microanalytical investigations carried out on non-implanted and implanted Ca-PSZ tools suggested that the surface of this ceramic material does not undergo modification once it has been inserted in the biological environment (12 months).

Journal Article↗

PubMed1994

Stimulatory effect on bone formation exerted by a modified chitosan.

A novel modified chitosan carrying covalently linked imidazole groups (average molecular weight 700,000, degree of substitution 0.28, degree of acetylation 0.08) was used to stimulate bone formation in an animal model. Lesions (7 mm diameter) were surgically made in the femoral condyle of sheep and treated with the modified chitosan. Within 40 d after surgery, the neoformed tissue occluded the surgical hole and assumed a trabecular structure in the peripheral area of the lesion, while looking like a mineralization nodule in the central part in association with a fibrous component. In the control, no sign of osteoinduction or reparative process was observed and bone marrow was rich in adipocytes.

Adipocytes↗

PubMed1992

Incidence of thrombotic complications in adult patients with acute lymphoblastic leukaemia receiving L-asparaginase during induction therapy: a retrospective study. The GIMEMA Group.

The incidence of thrombotic complications chronologically related to L-asparaginase administration is retrospectively analyzed in 238 adult ALL patients treated according to the GIMEMA protocol ALL 0288. The patients (126 males and 112 females, aged 12-68 years, median 29) received E. coli L-asparaginase (L-ase) in the induction phase at a dosage of 6000 U/m2/day x 7 d starting on d 15, as well as vincristine, prednisone, daunorubicin and cyclophosphamide, the last-named by random 1:1. Ten patients (4.2%) developed thrombotic complications 5-15 d (median 11 d) after the start of L-ase treatment. The thrombotic events, which were lethal in 5 patients, involved the cerebral sinus (5 cases), the cerebral arteria (2 cases), the portal vein (1 case), the pulmonary district (1 case), and a deep vein in the lower extremity (1 case). The occurrence of these complications was not related to the general thrombotic risk factors, nor to the main clinical and laboratory data registered at diagnosis and immediately before the start of L-asparaginase treatment. The present study documents for the first time in a sufficiently large series of adult ALL patients that the incidence and the severity of thrombotic events related to L-ase administration are relevant and need further consideration.

Adolescent↗

PubMedDate not supplied

Osteoblast behaviour in the presence of bisphosphonates: ultrastructural and biochemical in vitro studies.

OBJECTIVE: A positive balance in bone remodelling is an important goal of bone metabolism both in the presence of the osteoporotic processes characteristic of ageing and, especially, of prosthetic implants. The aim of the present work was to obtain new information about the initial steps of osteoblastic growth in an in vitro osteoblastic model in the presence of two bisphosphonates. METHODS: Experiments were performed with Alendronate and Neridronate, two molecules used in the therapy of osteoporosis. Since differentiating features into osteoblastic cells are known to parallel the presence in the cytoplasm of alkaline phosphatase and osteocalcin, we also carried out immunohistochemical typing. RESULTS: Good differentiation and osteoblastic activity were generally observed in the cells in contact with these compounds, except for 10(-4) Neridronate, where biochemical data clearly indicated its toxic effect on the cells. CONCLUSION: The detection of osteoblastic markers associated with an ultrastructural picture of correct organellar morphology in our cultures further supports the hypothesis of a metabolically positive action of these molecules on osteoblasts.

Alendronate↗

PubMedDate not supplied

[Bio-metabolic changes produced by 2 commercial fluoride-containing compounds on human keratinocytes].

BACKGROUND: Although fluoride has been used for decades either systemically or topically to prevent dental caries, the cellular and molecular mechanisms underlying its action are poorly understood. METHODS: An in vitro study of the human keratinocyte cell line NCTC 2544 was conducted in the presence of two different fluoride-containing commercial compounds (Zymafluor and Elmex) to investigate their toxicity threshold and the sequence of events involved in fluoride ion toxicity in this cell population. The toxicity threshold was determined by incubating cells with rising concentrations of Zymafluor and Elmex for 20 h. The study of the sequence of events involved in ion toxicity was performed through a time-effect study by exposing cells to 4 mM fluoride ions and testing them at 2, 6, and 20 h. Cell viability and ultrastructural parameters were assessed: degree of confluence, semiquantitative assessment of dead cells and debris in the supernatant, and morphology. RESULTS: Ultrastructural morphological analysis showed different cell behaviours with the two compounds; moreover, their toxic effect appeared to be both concentration- and time-dependent. CONCLUSIONS: These data underline the susceptibility of the intracellular communication system to fluoride and show that exceeding the therapeutic dose of fluoride involves substantial risk of toxicity.

Amines↗