PubMed Health⌕ Search

Biomedical subjects

M Mestres

Publications and source records attributed to M Mestres.

At least 19 recordsLinked to original sources

Comparative study of two chromatographic methods for quantifying 2,4,6-trichloranisole in wines.

Here we present the validation and the comparative study of two chromatographic methods for quantifying 2,4,6-trichloroanisole (TCA) in wines (red, rosé and white wines). The first method involves headspace solid-phase microextraction and gas chromatography with electron-capture detection (ECD). The evaluation of the performance parameters shows limit of detection of 0.3 ng l(-1), limit of quantification of 1.0 ng l(-1), recoveries around 100% and repeatability of 10%. The second one implies a headspace solid-phase microextraction and gas chromatography with mass spectrometric detection. The performance parameters of this second method are limit of detection of 0.2 ng l(-1), limit of quantification of 0.8 ng l(-1) and repeatability of 10.1%. From the comparative study we can state that both methods provide similar results and the differences between them are the better sensitivity of the GC-ECD method and the very shorter chromatogram running time of the GC-MS method. The two methods are able to quantify TCA below the sensorial threshold in red, rosé and white wines using just a calibration graph, thus they could be a very good tool for quality control in wineries.

Anisoles↗

Quantification of chloroanisoles in cork using headspace solid-phase microextraction and gas chromatography with electron capture detection.

Chloroanisoles can migrate from the cork stopper in wine bottles to the wine and give it a musty taint so it is important to find a method by which they can be determined. The aim of this paper is to develop a method for quantifying 2,4-dichloroanisole, 2,6-dichloroanisole, 2,4,6-trichloroanisole, 2,3,4,6-tetrachloroanisole and 2,3,4,5,6-pentachloroanisole in cork using headspace solid-phase microextraction and gas chromatography with electron capture detection. After we had prepared the cork standards that were so essential to the work we optimised the parameters that most influence headspace solid-phase microextraction: fibre coating, vial volume, cork, kind and volume of solvent to help the extraction, extraction temperature and time, ionic strength and stirring. The method quantifies the total amount of chloroanisoles in cork stoppers (natural, agglomerated, agglomerated with disks and sparkling wine stoppers), at suitable concentrations so that the capacity of these compounds to give wine a musty taint can be evaluated. The quantification limits are: 2,6-dichloroanisole (8.6 ng/g), 2,4,6-trichloroanisole (0.8 ng/g), 2,4-dichloroanisole (3.5 ng/g), 2,3,4,6-tetrachloroanisole (0.6 ng/g), 2,3,4,5,6-pentachloroanisole (0.8 ng/g). The other quality parameters are: recoveries (90.3-105.8%), repeatability (4-13% (RSD expressed)) and intermediate precision (5-14% (RSD expressed)).

Anisoles↗

Analysis of gamma-rays induced chromosome aberrations: a fingerprint evaluation with a combination of pan-centromeric and pan-telomeric probes.

PURPOSE: To evaluate the types of induced chromosome aberrations after the exposure of peripheral blood to gamma-rays by the simultaneous detection of all centromeres and telomeres; and to analyse the suitability of different radiation fingerprints for the assessment of radiation quality in cases of recent exposures. MATERIAL AND METHODS: Peripheral blood samples were irradiated at 2, 4 and 6 Gy of gamma-rays. Cytogenetic analysis was carried out by fluorescence in situ hybridization (FISH) technique with pan-centromeric and peptide nucleic acid (PNA)-telomeric DNA probes. Cells were analysed using a Cytovision FISH workstation, chromosome aberrations and the length of the acentric fragments were recorded. RESULTS: The total number of the incomplete chromosome elements was 276. The ratio between incomplete elements and multicentrics was 0.38. The number of acentrics was 1096, 71% were complete acentrics, 15% incomplete acentrics, and 14% interstitial fragments. The relative length of complete, incomplete and interstitial acentrics fragments were 2.70 +/- 0.04, 1.91 +/- 0.07, and 1.42 +/- 0.04 respectively. The mean value of the F-ratio was 11.5 higher than the one, 5.5, previously obtained for alpha-particles. For the G-ratio there was no difference between gamma-rays and alpha-particles, 2.8 and 2.8 respectively. The mean value of the H-ratio for gamma-rays, 0.25, was lower than for alpha-particles 0.40. CONCLUSION: The results support that the percentage of incomplete chromosome aberrations depends on radiation type; low-linear energy transfer (LET) radiation would produces less incomplete aberrations than high-LET radiation. The F- and H-ratios seem to be good indicators of radiation quality, although a real estimation of the H-ratio is only possible using pan-telomeric probes.

Adult↗

Analysis of alpha-particle induced chromosome aberrations in human lymphocytes, using pan-centromeric and pan-telomeric probes.

PURPOSE: The aim of the present study has been the evaluation of the incomplete chromosome aberrations induced after alpha-particle irradiation by the simultaneous detection of all centromeres and telomeres present in human lymphocytes. Moreover, a study on the lengths of the different acentric fragments is presented. MATERIALS AND METHODS: Attached lymphocytes were irradiated at doses of 0.2, 0.5, 0.7 and 1 Gy using a 241Am source. Flourescent in-situ hybridization (FISH) techniques were applied using pan-centromeric and pan-telomeric probes. All abnormal cells were digitalised and analysed using a Cytovision FISH workstation. The description of all abnormalities observed, and the length of the acentric fragments was recorded. RESULTS: A total of 378 incomplete chromosomes plus incomplete acentrics was found. Cases with more than 92 telomeres were not detected. The ratio between total incomplete elements and multicentrics was 1.00. The total number of acentric (ace) fragments was 822; 57% of them were complete fragments ace (+,+), 26% incomplete fragments ace (+,-), and 17% interstitial fragments ace(-,-); the mean relative lengths were 2.91 +/- 0.06, 1.91 +/- 0.07 and 1.63 +/- 0.07, respectively. In all three cases a secondary peak in the length distribution was found, corresponding to a relative length between 3.5 and 4. CONCLUSION: The percentage of incomplete rejoinings is higher after alpha-particle exposure than that described previously for low-linear energy transfer (LET) radiation exposures. The results seem to indicate that compared to low-LET radiation, after alpha-particle exposure centromere-containing elements are more likely to be repaired.Many interstitial fragments are large linear forms that cannot be considered as non-distinguishable acentric rings.

Alpha Particles↗

Determination of 2,4,6-trichloroanisole in wines by headspace solid-phase microextraction and gas chromatography-electron-capture detection.

One of the most important problems in the wine world, today, is cork taint, which often has been chemically identified as 2,4,6-trichloroanisole (TCA). The perception limit of this compound is very low (close to 10 and 40 ng/l for white and red wines, respectively), so, even at such low concentrations, its presence becomes a problem in wine quality. A method for the analysis of TCA in white and red wines has been developed in our laboratory, using headspace solid-phase microextraction and gas chromatography with electron-capture detection. The method, which has been optimized using an experimental design, involves the use of fibres coated with polydimethylsiloxane (PDMS) and allows the analysis of TCA at very low concentrations (under 500 ng/l) with good accuracy (RSD < or = 10%). The limits of quantification of the method are 5 and 8 ng/l for white and red wines, respectively, while the limit of detection is 1 ng/l for both types of wine.

Anisoles↗

Determination of 4-ethylguaiacol and 4-ethylphenol in red wines using headspace-solid-phase microextraction-gas chromatography.

A method for analysing 4-ethylguaiacol and 4-ethylphenol in the aroma of red wines using headspace-solid-phase microextraction is presented. The fibres used were coated with 100 microm of polydimethylsiloxane. Parameters like ionic strength, agitation of the sample, sample volume, temperature of the sample and adsorption/desorption times were studied and optimised to obtain the best extraction results. The linearity of the response was studied in the usual concentration ranges in wines (4-ethylguaiacol, 40-400 microg/l; 4-ethylphenol, 200-1800 microg/l). Repeatability of the method was determined, and the relative standard deviation was about 10%. Limits of detection and limits of quantification were also determined, and the values found were 1 and 5 microg/l for 4-ethylguaiacol and 2 and 5 microg/l for 4-ethylphenol, respectively. All these values were under the sensory thresholds established for these volatile phenols. The presence of interferences due to the matrix composition implies the use of the standard addition technique for both compounds quantification.

Chromatography, Gas↗

Headspace solid-phase microextraction of higher fatty acid ethyl esters in white rum aroma.

Fatty acid ethyl esters are the main components of rum aroma and play an important sensorial impact in these distilled alcoholic beverages. Herein, a method for analysing these volatile compounds is described. It involves a separation and concentration step using headspace solid-phase microextraction and determination by capillary gas chromatography using flame ionisation detection. The influence of different parameters related to the isolation and concentration step, such as ethanol concentration, ionic strength, sample volume, time and temperature of extraction, was studied. The developed method enabled recoveries >91% for the analyzed compounds with limits of detection between 0.007 and 0.027 mg/l, all of them lower than the range of concentrations found in rum samples. The method was successfully applied to the analysis of fatty acid ethyl esters in different commercial white rums.

Alcoholic Beverages↗

Headspace solid-phase microextraction analysis of 3-alkyl-2-methoxypyrazines in wines.

A procedure to determine 3-alkyl-2-methoxypyrazines in wines is described. It is based on the headspace solid-phase microextraction (HS-SPME) technique after a clean-up of the sample by distillation (previously acidified to pH 0.5) to remove ethanol and other volatile compounds that can interfere in the SPME. Determination is performed by means of capillary gas chromatography using a nitrogen-phosphorus detector. The method allows quantification of 3-isobutyl-2-methoxypyrazine, 3-sec-butyl-2-methoxypyrazine and 3-isopropyl-2-methoxypyrazine at their natural concentration levels and below their sensory thresholds in Cabernet Sauvignon and Merlot wines. The method was successfully applied to experimental red wines and the evolution of their pyrazine contents during the winemaking process was monitored. Pyrazine content increased during the first maceration day but did not change significantly during alcoholic and malolactic fermentation. Final contents in wines were 12-27 ng/l of 3-isobutyl-2-methoxypyrazine and 5-10 ng/l of 3-sec-butyl-2-methoxypyrazine.

Chromatography, Gas↗

Application of headspace solid-phase microextraction to the determination of sulphur compounds with low volatility in wines.

Headspace solid-phase microextraction (HS-SPME) has been used for determining sulphur compounds with low volatility in wines. With this technique, handling of samples is minimal so undesirable loses and reactions between compounds are prevented. Furthermore, this kind of extraction is fast and does not require any organic solvent. Under optimal conditions, the HS-SPME, using a new fibre coated with Stable Flex divinylbenzene-Carboxen-polydimethylsiloxane, makes possible the quantification of sixteen sulphur compounds with low volatility which may be present in wines. The limits of detection for the analytes studied ranged between 0.05 and 10 microg/l, and the recovery and repeatability found were acceptable. The method developed was successfully applied to determine the concentration of the target analytes in varietal wines from the Catalonian region (Spain) with some aromatic defects such as an odour of rubber, onion, rotten, unpleasant herbaceous, etc. The results show that the contents of the sulphur compounds studied in these wines are higher than in those without defects. This shows a relationship exists between the presence of sulphur compounds and the quality of the wine aroma.

Chromatography, Gas↗

Analysis of organic sulfur compounds in wine aroma.

Sulfur-containing compounds in wines have been extensively studied because of their effect on wine aroma. The aim of this paper was to give an overview on the analytical methods developed to determine them in wines with special emphasis on gas chromatographic methods, as well as the results obtained. In addition, the problems occurring in application of the common extraction procedures, such as liquid-liquid extraction, static and dynamic headspace and solid-phase microextraction, are presented and discussed.

Sulfur Compounds↗

Analysis of low-volatility organic sulphur compounds in wines by solid-phase microextraction and gas chromatography.

A method for analysing low-volatility sulphur compounds using solid-phase microextraction has been developed. The analytes were extracted directly from the liquid sample using fibres coated with different stationary phases. The best extraction efficiency was obtained with Carboxen-polydimethylsiloxane coating. Ionic strength, sample volume, time and temperature of the extraction were optimised and the matrix effect studied. The method enables 15 sulphur compounds in wine to be determined at trace levels with recoveries close to 100% and limits of detection between 0.05 and 5 microg/L. The overall method was successfully applied to the determination of the sulphur compounds studied in several red, white and rosé wines.

Chromatography, Gas↗

Headspace solid-phase microextraction method for determining 3-alkyl-2-methoxypyrazines in musts by means of polydimethylsiloxane-divinylbenzene fibres.

A method for determining 2-methoxypyrazine, 3-methyl-, 3-ethyl-, 3-isopropyl-, 3-sec.-butyl- and 3-isobutyl-2-methoxypyrazine in musts is described. It involves headspace solid-phase microextraction (SPME) and determination by capillary gas chromatography using nitrogen-phosphorous detection. Pyrazines were satisfactorily separated under isothermal conditions, and quantification was carried out using 3-isopropyl-2-ethoxypyrazine as the internal standard. Ionic strength, time and temperature were studied in order to make SPME as efficient as possible. The developed method enabled detection limits at the 0.1 ng(-1) levels for some of the analytes. The method was successfully applied to identify and quantify different 3-alkyl-2-methoxypyrazines in experimental musts of Cabernet Sauvignon and Merlot. Their evolution during the ripening was also monitored.

Osmolar Concentration↗

Simultaneous analysis of thiols, sulphides and disulphides in wine aroma by headspace solid-phase microextraction-gas chromatography.

This paper deals with the improvement of a headspace solid-phase microextraction (HS-SPME) method, developed in a previous work, in order to analyse, simultaneously, thiols, sulphides and disulphides in wines. This can be achieved by applying Carboxen-polydimethylsiloxane fibres and a cryogenic trap to focus the analytes. Under optimum conditions, the HS-SPME procedure developed shows low limits of detection for the sulphides and disulphides studied (0.05-3 micrograms/l) and the thiols can also be analysed and detected at very low levels (0.5-1 microgram/l) with acceptable recoveries and repeatability.

Chromatography, Gas↗

Headspace solid-phase microextraction of sulphides and disulphides using Carboxen-polydimethylsiloxane fibers in the analysis of wine aroma.

Headspace solid-phase microextraction was applied to gas chromatography coupled to flame photometric detection to develop a method for analysing volatile sulphides and disulphides in wine. The Carboxen-polydimethylsiloxane-coated silica fiber was tested and different parameters such as presampling time, ionic strength, stirring, headspace volume, ethanol concentration, time and temperature of extraction were optimized to make extraction as efficient as possible. The optimized conditions enabled limits of detection to be obtained at the ng/l levels. The fiber tested has a strong affinity for the sulphur compounds studied and enables these analytes to be quantitatively determined in wines. The Carboxen-polydimethylsiloxane-coated fiber is more efficient at extracting than fibers such as those which are polydimethylsiloxane-coated and polyacrylate-coated, but its repeatability is worse. The overall process was successfully applied to identify and quantify sulphur compounds in white, red, rose and vintage wines.

Adsorption↗

Headspace solid-phase microextraction analysis of volatile sulphides and disulphides in wine aroma.

Sulphur compounds (S-compounds) are important constituents of wine off-flavours. Headspace solid-phase microextraction (HS-SPME) combined with gas chromatography coupled to flame photometric detection (GC-FPD) was used to develop a suitable method to analyse volatile sulphides and disulphides. This is a very simple and fast technique which gives good reproducibility at microgram/l levels (relative standard deviations < 10%). The analytes were extracted from the headspace of the samples by using either polydimethylsiloxane or polyacrylate coated fused-silica fibers in an SPME unit. Then, the fiber was inserted into the injector of a gas chromatograph and the extracted S-compounds were thermally desorbed. The influence of different parameters, such as ionic strength, stirring, headspace volume, ethanol concentration, time and temperature of extraction, was studied. The extraction of the fibers varies considerably for the different sulphur compounds studied. The most volatile compounds were the least extracted by the coating fibers tested. The standard additions technique, applied to real samples, gave the recoveries > 94%. The detection limits range between 3 micrograms/l and 50 ng/l. The overall process was successfully applied to identify and quantify S-compounds in white and red wines.

Chromatography, Gas↗

Chromatographic analysis of volatile sulphur compounds in wines, using the static headspace technique with flame photometric detection.

This study describes the development of a method for determining eleven sulphur compounds in wine, which takes into account that thiols are easily oxidizable. The equilibria of the analytes between air and aqueous ethanol were studied and optimised using static headspace gas chromatography in order to obtain the best sensitivities. The influences of parameters such as temperature, time, ionic strength, headspace volume and the volume of headspace injected were determined. A cryogenic trap was used to concentrate the headspace analytes and they were chromatographically analysed using GC temperature programming on a poly(ethylene glycol) capillary column with FPD detection at 394 nm. The power relationship was observed between the chromatography response and a concentration of sulphur compounds in the range 2-150 micrograms l(-1) in the sample. Recoveries were determined by the standard addition technique and were higher than 90% for sulphides and disulphides and close to 80% for thiols. The overall method was successfully used to determine the sulphur compounds in white and red wines.

Chromatography, Gas↗

Detection and quantification of non-steroidal anti-inflammatory agents by gas chromatography/mass spectrometry: diclofenac.

A sensitive and reliable gas chromatography/mass spectrometric assay for diclofenac in plasma using selected ion monitoring is described. The procedure is based on the acidic extraction of diclofenac and ketoprofen (internal standard) with toluene. Both compounds are converted into their ethyl ester derivatives with ethanol containing 0.5% (v/v) sulphuric acid. No internal cyclization to indolone side product is produced in these conditions. The ions monitored are m/z 214 for diclofenac and m/z 209 for ketoprofen. The main recovery of diclofenac added to plasma has been estimated around 84.6% (120 ng ml-1, n = 4). The intra-assay and inter-assay variability were 1.9% and 10.3%, respectively. The sensitivity was lower than 2 ng ml-1. The applicability of the assays to study the bioavailability of two formulations in a multiple-dosage trial is described. The method has been used in more than 600 determinations without any interference.

Anti-Inflammatory Agents, Non-Steroidal↗