PubMed Health⌕ Search

Biomedical subjects

M Radermacher

Publications and source records attributed to M Radermacher.

At least 19 recordsLinked to original sources
PubMed1992

Three-dimensional reconstruction of single particles negatively stained or in vitreous ice.

The random-conical reconstruction method has been highly successful in three-dimensional imaging of macromolecules under low-dose conditions. This article summarizes the different steps of this technique as applied to molecules prepared with negative staining or vitreous ice, and sketches out the current directions of development. We anticipate that by using new instrumental developments, transfer function correction and computational refinement techniques, a resolution in the range of 7-10 A could ultimately be achieved.

Calcium Channels↗
PubMed1992

Cryo-EM of the native structure of the calcium release channel/ryanodine receptor from sarcoplasmic reticulum.

The native structure of the calcium release channel (ryanodine receptor) from rabbit skeletal muscle has been analyzed in two dimensions from electron micrographs of frozen hydrated specimens. Within a resolution of 3.0 nm there is excellent agreement between the structure as seen in vitreous water and in negative stained specimens. Features seen in the three-dimensional reconstruction of the negatively stained channel can be identified in the projection of the unstained receptor.

Animals↗
PubMed1992

Three-dimensional reconstruction of single particles embedded in ice.

Single particles embedded in ice pose new challenges for image processing because of the intrinsically low signal-to-noise ratio of such particles in electron micrographs. We have developed new techniques that address some of these problems and have applied these techniques to electron micrographs of the Escherichia coli ribosome. Data collection and reconstruction follow the protocol of the random-conical technique of Radermacher et al. [J. Microscopy 146 (1987) 113]. A reference-free alignment algorithm has been developed to overcome the propensity of reference-based algorithms to reinforce the reference motif in very noisy situations. In addition, an iterative 3D reconstruction method based on a chi-square minimization constraint has been developed and tested. This algorithm tends to reduce the effects of the missing angular range on the reconstruction, thereby facilitating the merging of random-conical data sets obtained from differently oriented particles.

Algorithms↗
PubMed1991

Interfacial energies and surface-tension forces involved in the preparation of thin, flat crystals of biological macromolecules for high-resolution electron microscopy.

It is generally agreed that surface-tension forces and the direct interaction between the specimen and either the air-water interface or the water-substrate interface can influence significantly the preparation of biological materials for electron microscopy. Even so, there is relatively little systematic information available that would make it possible to control surface-tension forces and interfacial energies in a quantitative fashion. The main objective in undertaking the present work has been to understand somewhat better the factors that influence the degree of specimen flatness of large, monolayer crystals of biological macromolecules. However, the data obtained in our work should be useful in understanding the preparation of specimens of biological macromolecules in general. Data collection by electron diffraction and electron microscopy at high resolution and high tilt angles requires thin crystals of biological macromolecules that are flat to at least 1 degree, and perhaps less than 0.2 degrees, over areas as large as 1 micron2 or more. In addition to determining empirically by electron diffraction experiments whether sufficiently flat specimens can be prepared on various types of modified or unmodified carbon support films, we have begun to use other techniques to characterize both the surfaces involved and the interaction of our specimen with these surfaces. In the specific case of large, monolayer crystals of bacteriorhodopsin prepared as glucose-embedded specimens on hydrophobic carbon films, it was concluded that the initial interfacial interaction involves adsorption of the specimen to the air-water interface rather than adsorption of the specimen to the substrate. Surface-tension forces at the air-water interface and an apparently repulsive interaction between the specimen and the hydrophobic carbon seem to be major factors influencing the specimen flatness in this case. In the more general case it seems likely that interfacial interactions with either the substrate or the air-water interface can be variously manipulated in the search to find desirable conditions of specimen preparation.

Adsorption↗
PubMed1990

Three-dimensional reconstruction of native Androctonus australis hemocyanin.

A sample of native 4 x 6-meric hemocyanin of Androctonus australis was negatively stained with the double-layer technique, and was observed by transmission electron microscopy under low-dose conditions with a 50 degree and 0 degree tilt. The three-dimensional reconstruction method from "Single-exposure, random conical tilt series" was then applied. Independent three-dimensional reconstructions were obtained from the top, side and 45 degree views. Despite a pronounced flattening effect, presumably due to the specimen preparation technique, the positions of the 24 subunits composing the oligomer were unequivocally determined. This experiment definitely solves the problem of the architectural organization of the subunits in the cheliceratan 4 x 6-meric hemocyanins. Moreover, distinction between the flip and flop faces and an attenuated rocking effect were observed.

Animals↗
PubMed1990

Fuzzy sets-based classification of electron microscopy images of biological macromolecules with an application to ribosomal particles.

Pattern recognition methods based on the theory of fuzzy sets are tested for their ability to classify electron microscopy images of biological specimens. The concept of fuzzy sets was chosen for its ability to represent classes of objects that are vaguely described from the measured data. A number of partitional clustering algorithms and an extensive set of cluster-validity functionals (some already reported and some newly developed) have been applied to a test-data set and to two real-data sets of images. One of the real-data sets corresponded to images of the Escherichia coli 50S ribosomal subunits depleted of proteins L7/L12 and the other set to images of the E. coli 70S monosome in the range of overlap views. These two latter sets had been previously studied by another clustering methodology. The new results obtained by the application of fuzzy clustering techniques will be compared to those previously obtained and some conclusions about the consistency of these classifications will be drawn from this comparison.

Algorithms↗
PubMed1989

Three-dimensional reconstruction of mammalian 40 S ribosomal subunit.

The small (40 S) subunit from rabbit reticulocyte ribosomes has been reconstructed from electron micrographs of a negatively stained single-particle specimen to a resolution of 3.85 nm. The reconstruction reveals a morphology consisting of a broad wedge-shaped head structure set atop a quasi-cylindrical body. Distinctive features recognized in two-dimensional projections, such as the beak, back lobes, and feet, can now be localized in three dimensions. By reference to a recent reconstruction of the monomeric 80 S ribosome we can identify the interface and exterior surfaces of the subunit, thus enabling more detailed functional interpretations.

Animals↗
PubMed1989

Three-dimensional reconstruction of the ribosome from Escherichia coli.

Three-dimensional image reconstruction has been applied to electron micrographs of noncrystalline, negatively stained ribosomes obtained from Escherichia coli. Several independent reconstructions all show an overall appearance resembling models that had been derived earlier by direct visual interpretation of electron micrographs. The reconstructed ribosomes show numerous structural details not recognized previously, some of which may be functionally significant. A large elongate cavity (approximately 8-nm long x 5-nm wide x 6-nm [maximal] deep) is present on the surface of the ribosome near the base of its stalk and is identifiable as a portion of a feature termed the interface canyon, which was detected in prior reconstructions of the large ribosomal subunit (Radermacher, M., T. Wagenknecht, A. Verschoor, and J. Frank. 1987. EMBO (Eur. Mol. Biol. Organ.) J. 6:1107-1114). On the back of the ribosome, near the base of the central protuberance, is a hole leading to the interface canyon, which likely represents an exit site for the elongating polypeptide produced during protein biosynthesis. The exposed portion of the interface canyon appears well suited to bind two tRNA molecules in a configuration that is consistent with biochemical and structural data on the mechanism of peptide bond biosynthesis.

Escherichia coli↗
PubMed1988

Three-dimensional structure of 50 S Escherichia coli ribosomal subunits depleted of proteins L7/L12.

A structural study of Escherichia coli 50 S ribosomal subunits depleted selectively of proteins L7/L12 and visualized by low-dose electron microscopy has been carried out by multivariate statistical analysis, classification schemes and the new reconstruction technique from single-exposure, random-conical tilt series. This approach has allowed us to solve the three-dimensional structure of the depleted 50 S subunits at a resolution of 3 nm-1. In addition, two distinct morphological populations of subunits (cores) have been identified in the electron micrographs analyzed and have been separately studied in three dimensions. Depleted subunits in the two morphological states present as main features common to these two structures but different from those of the non-depleted subunit (1) the absence of the stalk, (2) a rearrangement of the stalk-base that changes the overall structure of this region. This morphological change is quite noticeable and important, since this region is mapped as a part of the GTPase center. The two conformations differ mainly in the orientation of the area between the L1 region and the head (the probable localization of the peptidyl transferase center) and in the accessibility of the region located below the head. A possible relationship of these structural changes to the functional dynamics of the ribosome is suggested.

Escherichia coli↗
PubMed1988

Three-dimensional reconstruction of single particles from random and nonrandom tilt series.

To overcome the radiation damage-induced limitations to the resolution of three-dimensional reconstructions from electron microscopic tilt series, novel reconstruction schemes have been developed that require only a single exposure of the specimen. The tilt series collected with these methods have random projection directions. First, three-dimensional reconstruction techniques are described that are applicable to data obtained from tilt series with regular tilt geometry, followed by the extensions of these techniques to permit analysis of projection series with randomly spaced tilts. The main emphasis is placed on the weighted back-projection methods, which have recently been extended so as to be applicable to random tilt series. Besides a description of the algorithms, the complete procedure for a three-dimensional reconstruction from a single-exposure, random conical tilt series is explained, including the determination of the azimuthal angles, the alignment scheme for conical tilt series, the dependence of the achievable resolution on the number of projections for regular conical and single-axis geometries, and the method to calculate the actual resolution of two-dimensional image averages and of three-dimensional reconstructions using the phase residual and Fourier ring correlation criteria. Examples are given of biological specimens to which these three-dimensional reconstruction methods have been applied.

Algorithms↗
PubMed1988

Ultrastructure of the calcium release channel of sarcoplasmic reticulum.

This study is concerned with the characterization of the morphology of the calcium release channel of sarcoplasmic reticulum (SR) from fast-twitch skeletal muscle, which is involved in excitation-contraction coupling. We have previously purified the ryanodine receptor and found it to be equivalent to the feet structures, which are involved, in situ, in the junctional association of transverse tubules with terminal cisternae of SR. The receptor is an oligomer of a single high molecular weight polypeptide and when incorporated into phospholipid bilayers, has channel conductance which is characteristic of calcium release in terminal cisternae of SR. The purified channel can be observed by electron microscopy using different methods of sample preparation, with complementary views being observed by negative staining, double staining, thin section and rotary shadowing electron microscopy. Three views can be observed and interpreted: (a) a square face which, in situ, is junctionally associated with the transverse tubule or junctional face membrane; (b) a rectangle equivalent to the side view; and (c) a diamond shape equivalent to the side view, of which the base portion appears to be equivalent to the transmembrane segment. Negative staining reveals detailed substructure of the channel. A computer averaged view of the receptor displays fourfold symmetry and ultrastructural detail. The dense central mass is divided into four domains with a 2-nm hole in the center, and is enclosed within an outer frame which has a pinwheel appearance. Double staining shows substructure of the square face in the form of parallel linear arrays (six/face). The features of the isolated receptor can be correlated with the structure observed in terminal cisternae vesicles. Sections tangential to the junctional face membrane reveal that the feet structures (23-nm squares) overlap so as to enclose smaller square spaces of approximately 14 nm/side. We suggest that this is equivalent to the transverse tubule face and that the terminal cisternae face is smaller (approximately 17 nm/face) and has larger alternating spaces as a consequence of the tapered sides of the foot structures. Image reconstruction analysis appears to be feasible and should provide the three-dimensional structure of the channel.

Animals↗
PubMed1987

Three-dimensional structure of the large ribosomal subunit from Escherichia coli.

The three-dimensional structure of the large (50S) ribosomal subunit from Escherichia coli has been determined from electron micrographs of negatively stained specimens. A new method of three-dimensional reconstruction was used which combines many images of individual subunits recorded at a single high tilt angle. A prominent feature of the reconstruction is a large groove on the side of the subunit that interacts with the small ribosomal subunit. This feature is probably of functional significance as it includes the regions where the peptidyl transferase site and the binding locations of the elongation factors have been mapped previously by immunoelectron microscopy.

Escherichia coli↗
PubMed1987

Three-dimensional reconstruction from a single-exposure, random conical tilt series applied to the 50S ribosomal subunit of Escherichia coli.

We present a new reconstruction method that takes advantage of the fact that many biological macromolecular assemblies show a preferred orientation with respect to the plane of the specimen grid in the electron microscopic preparation. From one micrograph taken of such a specimen tilted by a large angle, a conical tilt series with random azimuthal angles can be extracted and used for a three-dimensional reconstruction. Our technique allows the determination of the molecular structure under low-dose conditions, which are not achievable with reconstruction methods that use conventional tilt series. The reconstruction method combines a number of existing image processing techniques with a newly developed weighted back-projection algorithm designed for three-dimensional reconstruction from projections taken with arbitrary projecting directions. The method is described as it was applied to the three-dimensional reconstruction of the structure of the 50S ribosomal subunit of Escherichia coli (E. coli).

Escherichia coli↗
PubMed1986

Tomographic three-dimensional reconstruction of cilia ultrastructure from thick sections.

We have applied a computer-based tomographic technique to reconstruct the three-dimensional ultrastructure of newt lung cilia. Epon-embedded samples were cut into 0.25-micron-thick sections that were imaged at 1 MV with a high-voltage electron microscope. For the reconstruction shown, a tilt series of 53 micrographs was taken at tilt angles between -54 degrees and +50 degrees. The reconstruction was accomplished from these projections using a weighted back-projection algorithm. The 12-nm resolution of the reconstruction was sufficient to resolve the outer doublet and central pair microtubules, dynein arms, radial spokes, and central sheath structures. The reconstruction can be viewed from various angles and with appropriate parts cut away to reveal structural features of interest. The sense of depth in these views can be enhanced by stereo viewing of shaded surface images. From this reconstruction, we determined that newt lung cilia contain the more common triplet grouping of radial spokes.

Animals↗