PubMed Health⌕ Search

Biomedical subjects

M S Baird

Publications and source records attributed to M S Baird.

At least 19 recordsLinked to original sources

Physicochemical characterization of cellulose from perennial ryegrass leaves (Lolium perenne).

In this study, we investigated the physicochemical properties of the cellulosic preparations obtained from both untreated perennial ryegrass leaves and de-juiced leaves. It was found that treatment at 22 degrees C with 18% NaOH and 18% KOH for 2h, and 10% NaOH and 10% KOH for 16 h yielded 28.2%, 28.8%, 22.7%, 23.4%, respectively, of 'cellulose' residue from untreated ryegrass leaves and 35.7%, 36.8%, 32.8% and 34.6%, respectively, from the de-juiced leaves. For each cellulosic fraction, the glucose content was 71.6%, 69.6%, 67.8%, 66.7%, 69.7%, 68.6%, 63.9% and 61.7%, respectively. The structure of the cellulose samples was examined using FTIR and CP/MAS (13)C NMR spectroscopy and X-ray diffraction. The cellulosic preparations were free of bound lignin except for noticeable amounts of residual hemicelluloses (28.4-38.3%), and had intrinsic viscosities between 275.1 and 361.0 mL/g, along with molecular weights from 144,130 to 194,930 g/mol. This study found that the cellulose samples isolated from both de-juiced ryegrass leaves and the untreated leaves had a much lower percent crystallinity (33.0-38.6%) than that from wood-based fibres (60-70%) and had much shorter fibres (0.35-0.49 mm) than those of either cereal straws, bagasse or wood. In addition, a partial disruption of the hydrogen bonds and microfibrils may occur during the de-juicing process by mechanical activity, which results in a decreased cellulose crystallinity and fibre length. These findings are significant in relation to hydrolysing ryegrass cellulose for bio-ethanol production.

Carbon Isotopes↗

Fractional and structural characterization of hemicelluloses from perennial ryegrass (Lolium perenne) and cocksfoot grass (Dactylis glomerata).

Sequential three-stage treatments with 80% EtOH containing 0.2% NaOH, 2.5% H2O2-0.2% EDTA containing 1.5% NaOH and 2.5% H2O2-0.2% TAED containing 1.0% NaOH at 75 degrees C for 3h released 8.0% and 10.4%, 79.1% and 77.0% and 12.9% and 12.5% of the original hemicelluloses from perennial grass and cocksfoot grass, respectively. It was found that the four alkaline peroxide-soluble hemicellulosic fractions contained higher amounts of xylose (33.4-38.2%), uronic acids (9.3-15.3%) and rhamnose (3.0-3.9%), but were lower in glucose (25.1-28.3%), galactose (13.3-15.3%) and mannose (0.4-1.5%) than those of the two alkaline EtOH-soluble hemicellulosic fractions in which glucose (32.9-36.0%), xylose (20.1-22.6%), arabinose (14.1-21.4%), galactose (16.6-19.9%), mannose (4.1-9.9%) and uronic acids (3.4-7.4%) were the major sugar components. 13C NMR spectroscopy confirmed that all the six hemicellulosic fractions were composed of galactoarabinoxylans, 4-O-methylglucuronoarabinoxylans and beta-glucan. In addition, the studies showed that the four alkaline peroxide-soluble hemicellulosic fractions were more linear and acidic and had larger molecular weights (Mw, 28,400-38,650 g mol(-1)) than those of the two alkaline EtOH-soluble hemicellulosic fractions (Mw, 16,460-17,420 g mol(-1)).

Chemical Fractionation↗

Physicochemical characterisation of residual hemicelluloses isolated with cyanamide-activated hydrogen peroxide from organosolv pre-treated wheat straw.

Seven residual hemicellulosic preparations (19.6-45.0% of the original hemicelluloses) were extracted from wheat straw pre-treated with various organic solvents using 1.8% H2O2-0.18% cyanamide at 50 degrees C and pH 10.0 for 4 h. Their chemical compositions and physicochemical properties were determined using GC, HPLC, GPC, FT-IR and 13NMR spectroscopy. The results indicated that all the residual hemicellulosic preparations were heteropolysaccharides containing xylose, glucose, arabinose, galactose, mannose, rhamnose and 4-O-methyl-alpha-D-glucopyranosyluronic acid. The predominant monosaccharide was xylose, ranging between 67.7% and 81.9% of the total neutral sugars, composed mainly of L-arabino-(4-O-methyl-D-glucurono)-D-xylan. The content of contaminant lignin in the isolated residual hemicelluloses was 2.89-5.31%. The Mw values of the two residual hemicellulosic preparations H6 and H7 (42,710 and 44,080 g mol-1, respectively) obtained from the aqueous-alcohol pre-treated straw were much higher than those of H1-H5 (12,980-15,950 g mol-1) extracted from the organic acid pre-treated straw.

Carbohydrates↗

Characteristics of degraded cellulose obtained from steam-exploded wheat straw.

The isolation of cellulose from wheat straw was studied using a two-stage process based on steam explosion pre-treatment followed by alkaline peroxide post-treatment. Straw was steamed at 200 degrees C, 15 bar for 10 and 33 min, and 220 degrees C, 22 bar for 3, 5 and 8 min with a solid to liquid ratio of 2:1 (w/w) and 220 degrees C, 22 bar for 5 min with a solid to liquid ratio of 10:1, respectively. The steamed straw was washed with hot water to yield a solution rich in hemicelluloses-derived mono- and oligosaccharides and gave 61.3%, 60.2%, 66.2%, 63.1%, 60.3% and 61.3% of the straw residue, respectively. The washed fibre was delignified and bleached by 2% H2O2 at 50 degrees C for 5 h under pH 11.5, which yielded 34.9%, 32.6%, 40.0%, 36.9%, 30.9% and 36.1% (% dry wheat straw) of the cellulose preparation, respectively. The optimum cellulose yield (40.0%) was obtained when the steam explosion pre-treatment was performed at 220 degrees C, 22 bar for 3 min with a solid to liquid ratio of 2:1, in which the cellulose fraction obtained had a viscosity average degree of polymerisation of 587 and contained 14.6% hemicelluloses and 1.2% klason lignin. The steam explosion pre-treatment led to a significant loss in hemicelluloses and alkaline peroxide post-treatment resulted in substantial dissolution of lignin and an increase in cellulose crystallinity. The six isolated cellulose samples were further characterised by FT-IR and 13C-CP/MAS NMR spectroscopy and thermal analysis.

Cellulose↗

Vibrational spectra and ab initio analysis of tert-butyl, trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethylcyclopropene. VI: Application of observed trends to stannyl derivatives.

The effects of substitution of X = C by Si or Ge in X(CH(3))(3) moieties attached to the formal double bond of 3,3-dimethylcyclopropene are examined. Regularities in observed trends of vibrational frequencies implicating the moieties containing the X atom, as the X atomic mass is increased, are extrapolated to X = Sn. The results of this extrapolation made it possible to assign the known experimental vibrational frequencies of 3,3-dimethyl-1-(trimethylstannyl)cyclopropene and 3,3-dimethyl-1,2-bis(trimethylstannyl)cyclopropene.

Cyclopropanes↗

Vibrational spectra and ab initio analysis of tert-butyl, trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethyl cyclopropene V. 3,3-dimethyl-1-(trimethylgermyl)cyclopropene.

3,3-dimethyl-1-(trimethylgermyl)cyclopropene (I) was synthesised using a standard procedure. The IR and Raman spectra of I in the liquid phase were measured. The molecular geometry of I was optimised completely at the HF/6-31G* level. The HF/6-31G*//HF/6-31G* force field was calculated and scaled using the set of scale factors transferred from those determined previously for scaling the theoretical force fields of 3,3-dimethylbutene-1 and 1-methyl-, 1,2-dimethyl-, and 3,3-dimethylcyclopropene. The assignments of the observed vibrational bands were performed using the theoretical frequencies calculated from the scaled HF/6-31G*//HF/6-31G* force field and the ab initio values of the IR intensities, Raman cross-sections and depolarisation ratios. The theoretical spectra are given. The completely optimised structural parameters of I and its vibrational frequencies are compared with corresponding data of related molecules.

Cyclopropanes↗

Vibrational spectra and ab initio analysis of tert-butyl, trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethylcyclopropene IV. 3,3-dimethyl-1,2-bis(trimethylgermyl)cyclopropene.

The infrared (IR) and Raman spectra of 3,3-dimethyl-1,2-bis(trimethylgermyl)cyclopropene (I) were measured in the liquid phase. Total geometry optimisation was performed at the HF/6-31G* level. The HF/6-31G*//HF6-31G* quantum mechanical force field (QMFF) was calculated and used to determine the theoretical fundamental vibrational frequencies, their predicted IR intensities, Raman activities, and Raman depolarisation ratios. Using Pulay's scaling method and the theoretical molecular geometry, the QMFF of I was scaled by a set of scaling factors comprised of elements transferred from the sets used to correct the QMFF's of 3,3-dimethylbutene-1, and 1-methyl-, 1,2-dimethyl-, and 3,3-dimethylcyclopropene (17 scale factors for a 105-dimensional problem). This set of scale factors was used previously to correct the QMFF of 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene and 3,3-dimethyl-1,2-bis(trimethylsilyl)cyclopropene. The scaled QMFF obtained was used to solve the vibrational problem. Differential Raman cross-sections were calculated using the quantum mechanical values of the Raman activities. The appropriate theoretical spectrograms for the Raman and IR spectra of I were constructed. Assignments of the experimental vibrational spectra of I are given. They take into account the calculated potential energy distributions and the correlation between the estimations of the experimental IR and Raman intensities and Raman depolarisation ratios and the corresponding theoretical values calculated using the unscaled QMFF.

Cyclopropanes↗

Vibrational spectra and ab initio analysis of tert-butyl, trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethylcyclopropene III. 3,3-Dimethyl-1-(trimethylsilyl)cyclopropene.

The experimental Raman and IR vibrational spectra of 3,3-dimethyl-1-(trimethylsilyl)cyclopropene in the liquid phase were recorded. Total geometry optimisation was carried out at the HF/6-31G* level and the HF/6-31G*//HF/6-31G* force field was computed. This force field was corrected by scale factors determined previously (using Pulay's method) for correction of the HF/6-31G*//HF/6-31G* force fields of 3,3-dimethylbutene-1, 1-methyl-, 1,2-dimethyl-, and 3,3-dimethylcyclopropene. The theoretical vibrational frequencies calculated from the scaled quantum mechanical force field and the theoretical intensities obtained from the quantum mechanical calculation were used to construct predicted spectra and to perform the vibrational analysis of the experimental spectra.

Cyclopropanes↗

Vibrational spectra and ab initio analysis of tert-butyl, trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethylcyclopropene II. 3,3-Dimethyl-1,2-bis(trimethylsilyl)cyclopropene.

The IR and Raman spectra of 3,3-dimethyl-1,2-bis(trimethylsilyl)cyclopropene (I) (synthesised using standard procedures) were measured in the liquid phase. Total geometry optimisation was performed at the HF/6-31G* level. The HF/6-31G*//HF/6-31G* quantum mechanical force field (QMFF) was calculated and used to determine the theoretical fundamental vibrational frequencies, their predicted IR intensities, Raman activities, and Raman depolarisation ratios. Using Pulay's scaling method and the theoretical molecular geometry, the QMFF of I was scaled by a set of scaling factors used previously for 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene (17 scale factors for a 105-dimensional problem). The scaled QMFF obtained was used to solve the vibrational problem. The quantum mechanical values of the Raman activities were converted to differential Raman cross sections. The figures for the experimental and theoretical Raman and IR spectra are presented. Assignments of the experimental vibrational spectra of I are given. They take into account the calculated potential energy distribution and the correlation between the estimations of the experimental IR and Raman intensities and Raman depolarisation ratios and the corresponding theoretical values (including Raman cross sections) calculated using the unscaled QMFF.

Cyclopropanes↗

The development of a chemical 'fingerprint' to characterise dissolved organic matter in natural waters.

A suite of twelve assays has been used to 'fingerprint' dissolved organic matter (DOM). The assays were applied directly to filtered natural water samples. Temperature, pH and conductivity accounted for the environmental conditions on-site. Bulk carbon characteristics were assayed by measuring UV absorbance at 200 and 240 nm, colour in grade Hazen, DOC (dissolved organic carbon), fluorescence (excitation 370 nm, emission 450 nm) and the complexation of phenol itself. Measuring hydroxybenzenes ('monophenolics'), polyhydroxybenzenes ('polyphenolics') and total phenolics with the Gibbs, Prussian Blue and Folin-Ciocalteau assays, respectively, determined the phenolics pool. The methodology was tested on six freshwater sites in North Wales chosen to provide differences in vegetation, land-use and water chemistry and sampled once during each season. A novel approach for the presentation of the data has been developed that combines all range normalised assay results for each site and each season within one polar plot, hence the term 'fingerprint'. The data was also analysed using principal component factor analysis. Assays characterised as determining the chemical properties of DOM contributed to Factor 1 and explained 59% of the variation in the data. Assays apparently determined by the water matrix, contributed to Factor 2 and explained 20% of the variation within the data. The factor scores obtained for each site showed more variation for assays relating to the chemical properties of DOM than to the surrounding water matrix. The methodology was found to detect chemical changes within DOM for each site throughout the year and different responses for different sites.

Environmental Monitoring↗

Effects of DETANONOate, a nitric oxide donor, on hemostasis in rabbits: an in vitro and in vivo thrombelastographic analysis.

PURPOSE: The purpose of this study was to determine if whole blood thrombelastographic variables (reaction time, K, alpha, and maximum amplitude) would be adversely effected by exposure to the nitric oxide (NO) donor, DETANONOate, in vitro or after alveolar instillation in vivo. MATERIALS AND METHODS: Conscious rabbits (n = 10) had blood sampled from ear arteries anticoagulated with sodium citrate. The blood was then incubated with 0, 1, 5, 10, or 20 mmol/L DETANONOate for 30 minutes. Arterial blood from anesthetized rabbits (n = 4) was obtained and anticoagulated before and 60 minutes after 1 mmol/L DETANONOate (2 mL/kg) was instilled into the right lung. After incubation, all samples were placed in a thrombelastograph and recalcified, with thrombelastographic variables measured for 45 minutes. RESULTS: In vitro, 10 mmol/L DETANONOate significantly (P < .05) increased reaction time, K, and decreased alpha compared with values observed after incubation with 0, 1, and 5 mmol/L DETANONOate. Twenty mmol/L DETANONOate significantly (P < .05) increased reaction time, K, and decreased alpha and maximum amplitude values compared with all other concentrations. In vivo, DETANONOate administration did not significantly affect thrombelastographic variables. CONCLUSION: DETANONOate significantly decreased hemostatic function in vitro in a dose-dependent fashion but did not significantly affect hemostatic function in vivo.

Animals↗

Carcinogenic effects of ptaquiloside in bracken fern and related compounds.

Consumption of the bracken fern Pteridium aquilinum by cattle has been shown to induce bladder and intestinal carcinomas in cattle and to cause a number of diseases in other farm animals. An unstable glucoside named ptaquiloside, containing a reactive cyclopropane ring, has been isolated from the fern and its potent carcinogenicity proven. Nineteen of 31 ferns tested by chemotaxonomic methods in Japan have been found to contain potentially carcinogenic ptaquilosides as have Cheilanthes sieberi and Pteridium esculentum. Hydrolysis of ptaquilosides leads to pterosins; under milder conditions a dienone which is believed to be the primary carcinogen is obtained. Hypacrone, a sesquiterpine containing a reactive cyclopropane ring, has been isolated from Hypolepis punctata and its structure proved by synthesis. Illudins, structurally similar to ptaquiloside, have been isolated from the basidiomycete Omphalotus illudens. These give anti-tumour activity and similar reactivity with nucleophiles to ptaquiloside. Compound CC-1065, a highly toxic antibiotic also containing a cyclopropane ring, has been isolated from Streptomyces zelensis. The mechanism of its reactivity with DNA has been compared to that of ptaquiloside and the small structural differences between carcinogenic and anti-tumour activity discussed. Both CC-1065 and adozelesin, a synthetic analogue with anti-tumour activity, have been shown to alkylate the N-3 atom of adenine in a certain sequence of DNA. The reactivity of cysteine with ptaquilosides and illudins is discussed, as is the role of cysteine alkylating agents in apoptosis.

Animals↗

Extreme hemodilution in rabbits: an in vitro and in vivo Thrombelastographic analysis.

UNLABELLED: Isovolemic hemodilution is used to decrease the incidence of blood transfusions. However, the effects of the degree of hemodilution and the fluid used on hemostasis are controversial. We tested the hypothesis that hemodilution and the fluid administered would adversely alter Thrombelastographic(R) (Haemoscope, Skokie, IL) variables (reaction time, alpha angle and maximal amplitude). Conscious rabbits had blood sampled from ear arteries and diluted 0% or 75% in vitro with one of four solutions: 6% hetastarch in 0.9% NaCl, 5% human albumin in 0.9% NaCl, or balanced electrolyte solutions containing either 6% pentastarch or 6% hetastarch. Isoflurane-anesthetized rabbits were randomly assigned to groups (n = 9 per group) that underwent in vivo isovolemic hemodilution (75% of estimated blood volume removed), with blood replaced with one of the four solutions mentioned previously. In vitro hemodilution resulted in a significant (P < 0.05) decrease in hemostatic function (increase in reaction time, decrease in alpha angle and maximal amplitude) that was largest after hemodilution with albumin. However, although in vivo hemodilution significantly (P < 0.05) decreased reaction time, increased the alpha angle, and decreased maximal amplitude, there were no significant fluid-dependent effects. IMPLICATIONS: The effects of hemodilution and the fluid used on Thrombelastographic(R) (Haemoscope, Skokie, IL) variables are markedly different between in vitro and in vivo hemodilution studies.

Animals↗

Halothane does not decrease amiloride-sensitive alveolar fluid clearance in rabbits.

UNLABELLED: Halothane decreases alveolar fluid clearance (AFC), a function required for efficient gas exchange in the rat. Further, halothane decreases amiloride-sensitive Na(+) transport in rat alveolar type II cells, a process responsible for a significant portion of AFC. We tested the hypothesis that halothane would decrease amiloride-sensitive AFC in rabbits. Rabbits anesthetized with 1.8% halothane had 5% albumin in 0.9% NaCl instilled into the right lung with (n = 11) or without (n = 11) 1 mM amiloride present in the instillate. Similarly, animals anesthetized with IV fentanyl and droperidol were administered 5% albumin solution with (n = 11) or without (n = 11) amiloride. At 90 min after instillation, alveolar fluid samples were obtained, and AFC was determined by changes in fluid protein concentration. Rabbits anesthetized with halothane or fentanyl and droperidol in the absence of amiloride had similar AFC values (35% +/- 12% and 35% +/- 7%, respectively, mean +/- SD). Rabbits anesthetized with halothane or fentanyl and droperidol in the presence of amiloride had similar AFC values (20% +/- 10% and 16% +/- 12%, respectively) that were significantly less than the groups not administered amiloride (P < 0.01). Unlike the rat, the ability of the rabbit to clear fluid from the alveolar space through amiloride-sensitive pathways is not decreased by halothane anesthesia. IMPLICATIONS: Unlike the rat, the ability of the rabbit to clear fluid from the alveolar space through amiloride-sensitive pathways is not decreased by halothane anesthesia.

Adjuvants, Anesthesia↗

Evaluation of the contribution of platelets to clot strength by thromboelastography in rabbits: the role of tissue factor and cytochalasin D.

UNLABELLED: The contribution of platelets and soluble clotting components to clot strength has been the focus of several clinical studies using thromboelastography; it would, therefore, be beneficial to develop an animal model with which to mechanistically approach hemostatic disorders. Thus, we proposed to determine if the contribution of platelet function (G(P), dyne/cm(2)) and soluble components of the coagulation pathway to total clot strength (G(T)) in rabbits were similar to those in humans. Blood was sampled from the ear arteries of conscious rabbits (n = 12); 350 microL of the blood was placed in a thromboelastograph. Ten microliters of normal saline, cytochalasin D (an inhibitor of microtubule function, 10 microM final concentration), or tissue factor (a potent stimulator of platelet function, 0.00625% final concentration) was added to the blood sample, and thromboelastography performed for 1 h. The G(T) (mean +/- SD) was significantly (P < 0.001) different among samples exposed to normal saline, cytochalasin D, or tissue factor, with G(T) values of 7238 +/- 1432, 937 +/- 372, and 16,556 +/- 3314, respectively. G(P) was responsible for 87% and 94% of G(T) in the absence or presence of tissue factor, respectively. G(P) did not significantly correlate with platelet concentration in the absence or presence of tissue factor. The contribution of G(P) to G(T) is similar to that observed in humans. IMPLICATIONS: Rabbits may serve as a model of hemostasis that closely approximates human situations to mechanistically determine the etiology of coagulopathy. The contribution of platelet function to total clot strength is similar to that observed in humans.

Animals↗

DETANONOate, a nitric oxide donor, decreases amiloride-sensitive alveolar fluid clearance in rabbits.

Inhaled nitric oxide (NO) has been administered to animals to selectively reduce pulmonary hypertension via NO donors such as the NONOates. However, vectorial Na(+) transport across confluent monolayers of alveolar type II (ATII) pneumocytes has been decreased by NO. We tested the hypothesis that administration of the NO donor, DETANONOate, would decrease alveolar fluid clearance (AFC) in the rabbit in vivo. We instilled a solution of 5% albumin in 0.9% NaCl with 3 mM DETANONOate into anesthetized rabbits. Two hours later, similar AFC values were measured in the presence and absence of 3 mM DETANONOate (38 +/- 12% versus 43 +/- 13%; mean +/- SD). However, animals coadministered 1 mM amiloride with one of three doses of DETANONOate (100 microM, 300 microM, or 3 mM) had significantly (p < 0.05) greater AFC values (23 +/- 8, 20 +/- 14, 28 +/- 12%, respectively) than those administered amiloride alone (10 +/- 7%). When 5% albumin in a Cl(-)-free solution was administered in the presence or absence of 100 microM DETANONOate, neither AFC values nor alveolar Cl(-) concentrations were different. DETANONOate decreases the amiloride-sensitive fraction of AFC but does not decrease total AFC. DETANONOate does not influence total AFC secondary to an increase in the amiloride-insensitive fraction of AFC that is not associated with a decrease in alveolar Cl(-) secretion.

Amiloride↗

Extreme, progressive isovolemic hemodilution with 5% human albumin, PentaLyte, or Hextend does not cause hepatic ischemia or histologic injury in rabbits.

BACKGROUND: Physicians and their patients are greatly concerned about perioperative blood administration. Although isovolemic hemodilution is utilized to decrease the incidence of transfusion, it is unclear at what degree of hemodilution hepatoenteric ischemia and injury occurs. The authors hypothesized that hepatic ischemia, systemic ischemia, and tissue injury would occur during hemodilution in rabbits, and that the severity of ischemia and injury may be dependent on the fluid administered. METHODS: Rabbits anesthetized with isoflurane were assigned randomly to a sham-operated group (n = 8) or groups that underwent four isovolemic hemodilutions (25% of the blood volume removed at hourly intervals), with blood replaced with one of three solutions: balanced electrolyte solutions containing 6% pentastarch (n = 8), 6% hetastarch (n = 9), or 5% human albumin in normal saline (n = 8). Arterial ketone body ratio and plasma lactate, respectively, served as measures of hepatic and systemic ischemia. Gastric, duodenal, and hepatic histologic injury was assessed post mortem. RESULTS: Hemodilution from a baseline hematocrit of about 33% to about 8% (third hemodilution) with all three colloids did not result in a significant increase in plasma lactate concentration or decrease in arterial ketone body ratio. At a hematocrit of about 5% (fourth hemodilution), the hetastarch group had a significantly (P < 0.05) greater plasma lactate concentration than the sham-operated and 5% human albumin groups. There were no significant differences in arterial ketone body ratio or histologic injury between the groups. CONCLUSIONS: Isovolemic hemodilution (approximately 5% hematocrit) with albumin, pentastarch, or hetastarch solutions does not result in significant hepatic ischemia or injury assessed by histology.

Animals↗

Desflurane increases pulmonary alveolar-capillary membrane permeability after aortic occlusion-reperfusion in rabbits: evidence of oxidant-mediated lung injury.

BACKGROUND: Pulmonary injury occurs after vascular surgery, with xanthine oxidase (an oxidant generator) released from reperfusing liver and intestines mediating a significant component of this injury. Because halogenated anesthetics have been observed to enhance oxidant-mediated injury in vitro, the authors hypothesized that desflurane would increase alveolar-capillary membrane permeability mediated by circulating xanthine oxidase after thoracic occlusion and reperfusion. METHODS: Rabbits were assigned to one of five groups: aorta occlusion groups administered desflurane (n=14), desflurane and tungstate (xanthine oxidase inactivator, n=12), fentanyl plus droperidol (n=13), and two sham-operated groups (desflurane, n=7 and fentanyl plus droperidol, n=7). Aortic occlusion was maintained for 45 min with a balloon catheter, followed by 3 h of reperfusion. Alveolar-capillary membrane permeability was assessed by measurement of bronchoalveolar lavage fluid protein. Xanthine oxidase activity was determined in plasma and lung tissue. Ascorbic acid content (an antioxidant) was determined in lung tissue. RESULTS: Desflurane was associated with significantly increased alveolar-capillary membrane permeability after aortic occlusion-reperfusion when compared with the fentanyl plus droperidol anesthesia or sham-operated groups (P < 0.05). Inactivation of xanthine oxidase abrogated the alveolar-capillary membrane compromise associated with desflurane. Although significantly greater than for sham-operated animals, plasma xanthine oxidase activities released after aortic occlusion-reperfusion were not different between the two anesthetics. There were no anesthetic-associated differences in lung tissue xanthine oxidase activity. However, desflurane anesthesia resulted in a significant reduction in lung ascorbic acid after aortic occlusion-reperfusion compared with the sham-operated animals. CONCLUSIONS: Desflurane anesthesia increased xanthine oxidase-dependent alveolar-capillary membrane compromise after aortic occlusion-reperfusion in concert with depletion of a key tissue antioxidant.

Anesthetics, Inhalation↗