Biomedical subjects

M Schappacher

Publications and source records attributed to M Schappacher.

4 recordsLinked to original sources

PubMed2001

Study of a (trimethylenecarbonate-co-epsilon-caprolactone) polymer--part 2: in vitro cytocompatibility analysis and in vivo ED1 cell response of a new nerve guide.

Future surgical strategies to restore neurological function in peripheral nerve loss may involve replacement of nerve tissue with cultured Schwann cells using biodegradable guiding implants. Random copolymers of trimethylene carbonate and epsilon caprolactone (P(epsilonCL-TMC), 50: 50) have been synthesized by ring opening polymerization using rare earth alkoxides as initiator. Their potential use as nerve guide repairs has been assessed through indirect and direct in vitro biocompatibility tests and in vivo soft tissue response to EDI subclass macrophages. In vitro, we exposed monolayers of human skin fibroblasts and an established continuous cell line (Hela) to liquid extracts (either pure or diluted in the culture medium) of epsilonCL-TMC copolymer including positive (phenol) and negative controls. Then, colorimetric assays (Neutral red and MTT) were performed. The extracts of epsilonCL-TMC induced no significant cytotoxic effect. We also exposed in vitro Schwann cells to pieces of P(epsilonCL-TMC) and P(LA-GA) copolymers. We evaluated cell attachment at 1 and 3 h by measuring the activity of the lysosomal enzyme (N-acetyl-beta-hexosaminidase) and cell proliferation at 1, 3, 6 and 9 days by measuring the cell metabolic activity (MTT assay). Values for attachment slightly decreased between 1 and 3 h but were significantly higher than on agars (negative control). Cells plated on epsilonCL-TMC showed a rate of proliferation comparable with that of normalized controls and higher than on PGA-PLA at day 9. Finally, we evaluated in vivo the soft tissue response after implantation of cylindrical tubes of P(epsilonCL-TMC) and P(LA-GA) copolymers with an immunohistochemistry staining procedure for the newly recruited ED1 macrophages. An image analysis system automatically measured the optical density of labelled positive ED1 cells at 9, 21 and 60 days after implantation. epsilonCL-TMC copolymer showed a mild soft tissue reaction with no adverse chronic inflammatory reaction. These data allowed us to consider this conduit as a potential effective substitute in nerve repair. El sevier Science Ltd. All rights reserved.

Animals↗

PubMed2001

Study of a (trimethylenecarbonate-co-epsilon-caprolactone) polymer part 1: preparation of a new nerve guide through controlled random copolymerization using rare earth catalysts.

Random copolymers of trimethylene carbonate and epsilon-caprolactone have been synthesized through ring-opening polymerization using rare earth alkoxides as initiator. The structure of the copolymers has been characterized by 1H and 13C NMR. Their thermal behaviour, their permeability to liquid and their mechanical properties have also been evaluated. These copolymers have been used to process a new nerve guide.

Biocompatible Materials↗

PubMed1999

Polymorphonuclear cell apoptosis in exudates generated by polymers.

Flow cytometry was used to quantify apoptotic and necrotic polymorphonuclear (PMN) cells in an exudate generated by biomaterials, and the results were compared with determinations of spontaneous apoptosis and necrosis in PMN cells from the bloodstream. The exudate formed inside cylindrical tubes subcutaneously implanted in the dorsal region of rats was collected over a 1-week period. A rapid and simple staining procedure based on the spectral properties of the bisbenzemide Hoechst 33342 was used to identify apoptotic PMN cells. Quantification of permeabilized PMN cells stained by propidium iodide was possible in the same unfixed specimens. The percentages of apoptotic and permeabilized PMN cells in peripheral rat blood were low (1.8 +/-0 0.5% and 1.7 +/- 0.7%, respectively), similar to results found in humans. In exudates generated by polyvinyl chloride (PVC), the percentages of apoptotic and permeabilized PMN cells were higher than in the blood. The percentage of PMN cells undergoing apoptosis progressively increased with time and reached a maximum at day 2 (27% +/- 6%). The percentage of permeabilized cells progressively increased with time and was much higher than the percentage of apoptotic cells on days 4 and 8. Apoptosis and necrosis of PMN cells at day 2 were inhibited when tubes were filled with 10% serum. Selective inhibition of apoptosis with a caspase inhibitor in vivo indicated that apoptosis and necrosis are two separate pathways leading to the death of PMN cells in the exudate. At day 2, polyurethane (PU) was associated with a lower rate of apoptosis than PVC or a random copolymer of trimethylene carbonate (TMC) and epsiloncaprolactone (ECL). Apoptosis was interpreted as an organized cell removal process that limits inflammation. Apoptosis was the natural route of PMN cell death at the early stage of inflammation.

Animals↗

PubMed1987

Synthesis, structure and spectroscopic properties of two models for the active site of the oxygenated state of cytochrome P450 [corrected].

Two dioxygen adducts of thiolato-iron(II) porphyrins, [K(222)][Fe(TPpivP)(SC6HF4)(O2)] 1a and [Na(18c.6)][Fe(TPpivP)(SC6HF4)(O2)] 2 were synthesized by reaction of O2 with five-coordinate, high-spin, cryptated alkali metal thiolato-iron(II) 'picket fence' porphyrinate. They were characterized by visible and infrared spectroscopy: lambda max (log epsilon) = 360 nm (4), 427 nm (4.69), 560 nm (3.69), 610 nm (3.40) for both compounds; v(16O-16O) = 1139 cm-1 in chlorobenzene and fluorobenzene for 1a and 2. Single crystals of composition [K(222)][Fe(TPpivP)(SC6HF4)(O2)].[K(222)](SC6HF4)(C 6H5Cl)(H2O) 1b were obtained by diffusion of pentane/xylene mixtures into chlorobenzene solutions of 1a at -5 degrees C. Single crystals of composition [Na(18c.6)][Fe(TPpivP)(SC6HF4)(O2)] were obtained by slow diffusion of pentane into benzene solutions of 2. Structures of 1b and 2 were studied at 20 degrees C (1b) and -100 degrees C (1b and 2). 1b: space group P2(1)/c (monoclinic), a = 16.806(5) A (1.6806 nm), b = 14.331(4) A (1.4331 nm), c = 52.000(15) A (5.2000 nm), beta = 92.95(2) degrees, V = 12.507 A3 (12.507 nm3), Z = 4, Dcal = 1.28 g.cm-3 (t = 20 degrees C). The final R1 factor was 0.085 for 5238 reflections having I greater than 3 sigma(I). 2: space group P2(1)/c (monoclinic), a = 13.107(3) A (1.3107 nm), b = 27.055(4) A (2.7055 nm), c = 25.029(4) A (2.5029 nm), beta = 96.84(2) degrees, V = 8812 A3 (8.812 nm3), Z = 4, Dcal = 1.18 g.cm-3 (t = -100 degrees C). The final R1 factor was 0.088 for 6587 reflections having I greater than 3 sigma(I). The iron atom is, in both compounds, bonded to the four porphyrinato nitrogens (Np), the sulfur atom of the axial thiolate and one oxygen atom of the axially end-on bonded dioxygen molecule. The average Fe-Np distance found in 1b [1.994(4) A, 0.1994 nm] is not significantly different from that found in 2 [1.993(3) A, 0.1993 nm]. The Fe-S bond length is 2.367(3) A (0.2367 nm) in 1b and 2.365(2) A (0.2365 nm) in 2. The Fe-O1 distances with the oxygen atom of O2 bonded to iron are respectively 1.837(9) A (0.1837 nm) and 1.850(4) A (0.1850 nm). The end-on bonded O2 molecule is disordered in both complexes 1b and 2.(ABSTRACT TRUNCATED AT 400 WORDS)

Binding Sites↗