Molecular motors. Switching on kinesin.
Explore the source record for details and available documents.
Biomedical subjects
Publications and source records attributed to M Schliwa.
Explore the source record for details and available documents.
Cryo-electron microscopy and 3D image reconstruction of microtubules saturated with kinesin dimers has shown one head bound to tubulin, the other free. The free head of rat kinesin sits on the top right of the bound head (with the microtubule oriented plus-end upwards) in the presence of 5'-adenylylimido-diphosphate (AMPPNP) and on the top left in nucleotide-free solutions. To understand the relevance of this movement, we investigated other dimeric plus-end-directed motors: Neurospora kinesin (Nkin); Eg5, a slow non-processive kinesin; and a chimera of Ncd heads attached to Nkin necks. In the AMPPNP (ATP-like) state, all dimers have the free head to the top right. In the absence of nucleotide, the free head of an Nkin dimer appears to occupy alternative positions to either side of the bound head. Despite having the Nkin neck, the free head of the chimera was only seen to the top right of the bound head. Eg5 also has the free head mostly to the top right. We suggest that processive movement may require kinesins to move their heads in alternative ways.
Kinesin motor proteins are molecules capable of moving along microtubules. They share homology in the so-called core motor domain which acts as a microtubule-dependent ATPase. The surprising finding that different members of the superfamily move in opposite directions along microtubules despite their close similarity has stimulated intensive research on the determinants of motor directionality. This article reviews recent biophysical, biochemical, structural and mutagenic studies that contributed to the elucidation of the mechanisms that cause directional motion of kinesin motor proteins.
Explore the source record for details and available documents.
Here, using a quantitative in vivo assay, we map three regions in the carboxy terminus of conventional kinesin that are involved in cargo association, folding and regulation, respectively. Using C-terminal and internal deletions, point mutations, localization studies, and an engineered 'minimal' kinesin, we identify five heptads of a coiled-coil domain in the kinesin tail that are necessary and sufficient for cargo association. Mutational analysis and in vitro ATPase assays highlight a conserved motif in the globular tail that is involved in regulation of the motor domain; a region preceding this motif participates in folding. Although these sites are spatially and functionally distinct, they probably cooperate during activation of the motor for cargo transport.
The gallop of a race horse and the minute excursions of a cellular vesicle have one thing in common: they are based on the directional movement of proteins termed molecular motors -- many trillions in the case of the horse, just a few in the case of the cell vesicle. These tiny machines take nanometre steps on a millisecond timescale to drive all biological movements. Over the past 15 years new biochemical and biophysical approaches have allowed us to take a giant step forward in understanding the molecular basis of motor mechanics.
Explore the source record for details and available documents.
A cDNA encoding a 224-kDa Dictyostelium discoideum centrosomal protein (DdCP224) was isolated by immunoscreening. DdCP224 was detected at the centrosome and, more weakly, along microtubules throughout the entire cell cycle. Centrosomal localization does not require microtubules, suggesting that DdCP224 is a genuine centrosomal component. DdCP224 exhibits sequence identity to a weakly conserved class of microtubule-associated proteins including human TOGp and yeast Stu2p. Stu2p has a size of only approximately 100 kDa and corresponds to the N-terminal half of DdCP224. The functions of the N- and C-terminal halves of DdCP224 were investigated in the corresponding GFP-fusion mutants. Surprisingly, the N-terminal construct showed only cytosolic localization, whereas the C-terminal construct localized exclusively to the centrosome. This is unexpected because Stu2p is localized at the spindle pole body. Full-length DdCP224-GFP was present both at centrosomes and along microtubules. Furthermore, it bound to microtubules in vitro, unlike the two truncated mutants. Thus centrosome binding is determined by the C-terminal half and microtubule binding may require the interaction of the N- and C-terminal halves. Interestingly, cells expressing full-length DdCP224-GFP exhibit supernumerary centrosomes and show a cytokinesis defect, suggesting that DdCP224 plays an important role in centrosome duplication. These features are unique among the known centrosomal proteins.
We show using single molecule optical trapping and transient kinetics that the unusually fast Neurospora kinesin is mechanically processive, and we investigate the coupling between ATP turnover and the mechanical actions of the motor. Beads carrying single two-headed Neurospora kinesin molecules move in discrete 8 nm steps, and stall at approximately 5 pN of retroactive force. Using microtubule-activated release of the fluorescent analogue 2'-(3')-O-(N-methylanthraniloyl) adenosine 5'-diphosphate (mantADP) to report microtubule binding, we found that initially only one of the two motor heads binds, and that the binding of the other requires a nucleotide 'chase'. mantADP was released from the second head at 4 s(-1) by an ADP chase, 5 s(-1) by 5'-adenylylimidodiphosphate (AMPPNP), 27 s(-1) by ATPgammaS and 60 s(-1) by ATP. We infer a coordination mechanism for molecular walking, in which ATP hydrolysis on the trailing head accelerates leading head binding at least 15-fold, and leading head binding then accelerates trailing head unbinding at least 6-fold.
We have developed an assay that allows the functional efficiency of mutant kinesins to be probed in vivo. We show here that the growth rate of the filamentous fungus Neurospora crassa can be used as a sensitive reporter for the ability of mutant kinesins to suppress the phenotype of the kinesin null mutant of Neurospora. Truncation mutants, internal deletion mutants and chimeras, in which homologous domains were exchanged between different fungal kinesins, were generated and transformed into the kinesin-deficient strain. None of the mutations affect motor velocity in vitro, but even minor alterations in the tail domain severely compromise kinesin's performance in vivo. The analysis of these mutants has identified subdomains in the stalk and tail likely to be involved in cargo binding and/or regulation of motor activity. The phenotypes of several mutants strongly suggest that kinesin requires a folded conformation to achieve full functionality in vivo. Folding critically depends on two flexible domains in the stalk that allow an interaction of the tail with the neck/hinge region near the catalytic motor domain. The assay has proven to be a valuable tool in the analysis of kinesin function in vivo and should help to characterize the sites involved in intra- and intermolecular interactions.
Centrosome duplication and separation are of central importance for cell division. Here we provide a detailed account of this dynamic process in Dictyostelium. Centrosome behavior was monitored in living cells using a gamma-tubulin-green fluorescent protein construct and correlated with morphological changes at the ultrastructural level. All aspects of the duplication and separation process of this centrosome are unusual when compared with, e.g., vertebrate cells. In interphase the Dictyostelium centrosome is a box-shaped structure comprised of three major layers, surrounded by an amorphous corona from which microtubules emerge. Structural duplication takes place during prophase, as opposed to G1/S in vertebrate cells. The three layers of the box-shaped core structure increase in size. The surrounding corona is lost, an event accompanied by a decrease in signal intensity of gamma-tubulin-green fluorescent protein at the centrosome and the breakdown of the interphase microtubule system. At the prophase/prometaphase transition the separation into two mitotic centrosomes takes place via an intriguing lengthwise splitting process where the two outer layers of the prophase centrosome peel away from each other and become the mitotic centrosomes. Spindle microtubules are now nucleated from surfaces that previously were buried inside the interphase centrosome. Finally, at the end of telophase, the mitotic centrosomes fold in such a way that the microtubule-nucleating surface remains on the outside of the organelle. Thus in each cell cycle the centrosome undergoes an apparent inside-out/outside-in reversal of its layered structure.
The ultrastructure of the Dictyostelium centrosome is markedly different from that of the well known yeast spindle pole body and vertebrate centriole-containing centrosome. It consists of a box-shaped, layered core structure surrounded by a corona with dense nodules embedded in an amorphous matrix. For further structural and biochemical analyses of this type of centrosome we used highly enriched isolated Dictyostelium centrosomes as an antigen to raise 14 new centrosomal monoclonal antibodies. Immunofluorescence microscopy and Western blot analysis revealed that at least 10 of them were directed against different antigens. Immunofluorescence microscopy also showed that the monoclonal antibodies fell into three different groups: A) antibodies localizing to the centrosome during the entire cell cycle; B) antibodies staining the centrosome mainly during mitosis; and C) antibodies labeling centrosome associated structures. All antibodies, except one, exhibited a cell cycle-dependent staining pattern underscoring the highly dynamic properties of the Dictyostelium centrosome.
Directed cell movement is an immensely complex process that depends on the co-operative interaction of numerous cellular components. Work over the past three decades has suggested that microtubules play an important role in the establishment and maintenance of the direction of cell migration. This chapter summarizes recent work from our laboratory designed to determine the roles of the microtubules and centrosome position relative to the direction of cell migration in a variety of cell types, and discusses these observations in the context of work from other laboratories. The results suggest that microtubules are required for stabilization of the direction of migration in many, but not all, cell types. For the centrosome to act as a stabilizer of cell migration requires that it is repositioned behind the leading edge. However, the process of repositioning does not precede the extension of a leading edge and the establishment of a new direction of cell migration. Rather, the centrosome follows the repositioning of the leading edge in response to other stimuli and, in doing so, stabilizes cell movement.
Conventional kinesin is a molecular motor consisting of an N-terminal catalytic motor domain, an extended stalk and a small globular C-terminus. Whereas the structure and function of the catalytic motor domain has been investigated, little is known about the function of domains outside the globular head. A short coiled-coil region adjacent to the motor domain, termed the neck, is known to be important for dimerization and may be required for kinesin processivity. We now provide evidence that a helix-disrupting hinge region (hinge 1) that separates the neck from the first extended coiled-coil of the stalk plays an essential role in basic motor activity. A fast fungal kinesin from Syncephalastrum racemosum was used for these studies. Deletion, substitution by a coiled-coil and truncation of the hinge 1 region all reduce motor speed and uncouple ATP turnover from gliding velocity. Insertion of hinge 1 regions from two conventional kinesins, Nkin and DmKHC, fully restores motor activity, whereas insertion of putative flexible linkers of other proteins does not, suggesting that hinge 1 regions of conventional kinesins can functionally replace each other. We suggest that this region is essential for kinesin movement in its promotion of chemo-mechanical coupling of the two heads and therefore the functional motor domain should be redefined to include not only the catalytic head but also the adjacent neck and hinge 1 domains.
Tubulins are highly conserved multidomain proteins that have to interact with eukaryotic chaperonins to gain their correct three-dimensional conformation. The prokaryotic chaperonin system of GroEL/ES is able to generate intermediate folding states but not natively folded tubulin. To create a system for studying these folding intermediates, tubulins from the giant amoeba Reticulomyxa filosa (alpha 2- and beta 2-tubulin) were expressed in Escherichia coli singly or in tandem. In all cases, soluble tubulin was generated in amounts of 5-10 mg/l culture. This is the first reported expression of soluble tubulin in bacterial cells. Of particular interest was the observation that upon coexpression with R. filosa beta 2-tubulin, proteolytic degradation of alpha 2-tubulin was reduced and more full-length product remained intact. This observation points to a specific interaction of alpha 2- and beta 2-tubulins in the E. coli cell. The sites of interaction are most probably the same that are responsible for the binding of native alpha 2- and beta 2-tubulin. The established expression system therefore seems well suited for further studies concerning the folding of tubulins.
Conventional kinesins are molecular motors that move towards the plus end of microtubules. In animal species, they have been shown to be remarkably conserved in terms of both their primary sequence and several physiological properties, including their velocity of movement. Here we report the cloning of Synkin, a homologue of conventional kinesin from the zygomycete fungus Syncephalastrum racemosum [Steinberg, Eur. J. Cell Biol. 73 (1997) 124-131] that is 4-5 times faster than its animal counterparts. Expression in bacteria yields a fully functional motor that moves at the same speed as the native motor isolated from fungal hyphae and has similar hydrodynamic properties. Its sequence is most closely related to that of two other fungal kinesins from Neurospora and Ustilago, and shares several biochemical properties with the Neurospora motor. Fungal kinesins therefore seem to form a conserved subfamily of conventional kinesins distantly related to animal kinesins. They may help to identify sequence features important for determining motor velocity.