PubMed Health⌕ Search

Biomedical subjects

M T Hearn

Publications and source records attributed to M T Hearn.

At least 55 records · Page 3Linked to original sources

Direct synthesis and characterisation of multi-dendritic peptides for use as immunogens.

The direct synthesis and subsequent rapid characterisation of multiple antigen peptides (MAPs) for use as immunogens has presented difficulties, partly because of the formation of incomplete or truncated peptide sequences during the synthetic procedure. Therefore, many researchers have resorted to ligation procedures for the synthesis of MAP constructs. This article describes a method to improve the yield of MAP constructs by direct synthesis methods, as well as a general procedure that enables easier characterisation of the synthetic products. In particular, during the synthesis of MAP constructs, a capping procedure was introduced after each amino acid coupling step, thus improving significantly the yield of the desired multi-dendritic peptidic immunogens. Through the use of this capping procedure, problems arising from the incomplete amino acid residue coupling at the point of synthesis were minimised, and any deletion peptides which formed could be eliminated more readily during the subsequent purification procedures. In addition, previous difficulties in purification and characterisation of MAP construct by, e.g. electrospray mass spectroscopy (ES-MS), often led to the multi-dendritic peptidic immunogens being used without full characterisation after dialysis and recovery of the product(s). This article describes an enzymatic (tryptic) digestion method with the MAP construct, followed by characterisation of the enzymatic digest by reversed phase high-performance liquid chromatography-ES-MS. With this method, fragments of the MAP construct cleaved at specific amino acid residue sites (e.g. lysine or arginine) within the sequence of the parent peptide can be readily determined and the kinetics of the digestion easily followed. This enzymatic digestion procedure thus provides a facile approach to confirm that all of the multi-dendritic arms of the purified MAP construct have been equivalently elongated during the peptide synthesis and that consequently the purified construct structure contains the correct peptide sequence.

Amino Acid Sequence↗

Investigations into the cross-reactivity of rabbit antibodies raised against nonhomologous pairs of synthetic peptides derived from HIV-1 gp120 proteins.

The immunological cross-reactivity of several peptides with specific pattern-property characteristics related to the epitopes of human immunodeficiency virus type 1 (HIV-1) gp160/ 120 envelope proteins has been investigated. Proteins with similar primary structures can be expected to show functional or topographic similarities, such as specific epitopes which may cross-react with antibodies derived from the immunisation of animals with other members of the same protein family. These structure-function characteristics may be revealed as periodicities derived from presentations based on the discrete Fourier transformation of the distributions of various physico-chemical amino acid descriptors, constituting the polypeptide backbone and amino acid side-chains of the protein molecule. Such approaches, for example, have permitted prediction of periodicities corresponding to secondary structural motifs, including amphipathic alpha-helices and beta-sheets, within protein sequences, and have helped to clarify potential binding sites for ligands, substrates or cofactors with interacting macromolecules. Based on this approach, characteristic periodicities have been identified which represent common Fourier transform spectral properties of the envelope (ENV) gp160/120 glycoproteins from a range of HIV-1 isolates. In addition, similar periodicities have been detected as components of the discrete Fourier transform representation of the corresponding amino acid descriptors of the CD4 binding domain of gp120. Accordingly, we have synthesised several peptides having periodic characteristics in their discrete Fourier transform representations similar to these HIV-1 proteins. These nonhomologous synthetic peptides induced cross-reactive antibodies in New Zealand White rabbits. Polyclonal antibodies raised to one of these peptides reacted with HIV-1 ENV gp120-related proteins, as determined by enzyme-linked immunosorbent assay and Western blotting techniques. These findings provide further evidence for a role of immunological cross-reactivity and molecular biomimicry in the development of peptide-based vaccines directed against viral or bacterial pathogens.

Animals↗

Thermodynamic analysis of the stabilisation of pig heart mitochondrial malate dehydrogenase and maize leaf phosphoenolpyruvate carboxylase by different salts, amino acids and polyols.

As part of our investigations into the inactivation of pig heart mitochondrial malate dehydrogenase (phm-MDH) and maize leaf phosphoenolpyruvate carboxylase (ml-PEPC) in the presence of various cosolvents, the denaturation kinetics as a function of temperature have been determined based on Arrhenius plots derived from transition state theory analysis over the temperature range from 3.5 degrees C to 65 degrees C. The experimental data for phm-MDH were obtained in the presence of 1 M concentrations of various salts of monovalent and polyvalent anions, 1 M amino acids or 1 M sucrose and 6.1 M glycerol. Similarly, Arrhenius plot data were obtained for ml-PEPC in the presence of 2.5 M NaOAc and 0.8 M sodium glutamate. Distinct regimes of inactivation corresponding to high and low values of inactivation enthalpy were identified for the phm-MDH in the presence of all cosolvents and for the ml-PEPC in the presence of 2.5 M NaOAc, but not in the presence of 0.8 M sodium glutamate. A significant temperature-dependent effect dominated the inactivation of phm-MDH and ml-PEPC at elevated temperatures (e.g., > or = 45 degrees C), whilst the inactivation of these enzymes over a lower temperature range (< or = 25 degrees C) was dominated by temperature-independent phenomenon. The corresponding thermodynamic activation parameters (deltaG++, deltaH++ and deltaS++) associated with the transition state complexes involved in the inactivation of phm-MDH and ml-PEPC in the presence of the various cosolvents have been determined. The results indicate that the transition states associated with the inactivation of these two enzymes at elevated temperatures are characterised by large, positive enthalpic and entropic changes. In contrast, the inactivation process observed for phm-MDH at low temperatures in the presence of various cosolvents was marked by a large, negative entropic contribution and a small, positive enthalpic contribution. The results obtained in this study indicate that more than one mechanism of inactivation can occur with these two multimeric enzymes depending on the selected temperature range and the type of cosolvent. The relationship of these results to stabilisation models for phm-MDH and ml-PEPC in the presence of various cosolvents, as well as the application of Arrhenius plot data to extrapolate the long term solution stability of these enzymes at lower temperatures from the pseudo-first order rate constants of inactivation experimentally derived over a range of temperatures, are discussed.

Alcohols↗

Comparative studies on the isothermal characteristics of proteins adsorbed under batch equilibrium conditions to ion-exchange, immobilised metal ion affinity and dye affinity matrices with different ionic strength and temperature conditions.

In these investigations, the influence of a range of experimental parameters on the isothermal characteristics of hen egg white lysozyme (HEWL) and human serum albumin (HSA) adsorbed to several different adsorbents has been examined. The adsorbents were selected to encompass the same basic types of silica support matrices, but with the ligand properties and surface characteristics adjusted so that the dominant mode of interaction between the protein and the ligand involved either electrostatic binding (i.e. as ion-exchange interaction with polyaspartic acid immobilised onto glycidoxypropyl-modified Fractosil 1000), mixed-mode binding with both hydrophobic and electrostatic effect contributing to the protein-ligand interaction (i.e. as dye-affinity interactions with Cibacron Blue F3G-A immobilised onto Lichroprep DIOL or onto glycidoxypropyl-modified Fractosil 1000), or lone pair coordination binding (i.e. as immobilised metal ion affinity (IMAC) interactions with Cu2+ ions complexed with iminodiacetic acid immobilised onto glycidoxypropyl-modified Fractosil 1000). In each case, the adsorbents exhibited similar ligand densities and had the same particle size ranges and silica surface pretreatment. The effect of the ionic strength of the adsorption buffer and temperature on the isothermal adsorption behaviour under batch equilibrium binding conditions of the two test proteins were determined. Consistent with previous observations with soft gel ion exchangers and triazine dye-based adsorbents that are used in packed bed chromatographic systems, the capacities of the silica-based ion-exchange adsorbents, as well as the Cibacron Blue F3G-A dye affinity adsorbents, for both HSA and HEWL were reduced as the salt concentration was increased under batch equilibrium binding conditions. Moreover, with both of these classes of adsorbents, as the ionic strength was increased under constant temperature conditions, the isothermal adsorption dependencies progressively approximated more closely a Langmuirean model of independent binding site interactions, typical of a mono-layer binding process. In contrast, with the silica-based immobilised metal ion affinity adsorbents as the ionic strength was increased the adsorption behaviour appeared to follow a Freundlich model, indicative of positive cooperativity in the binding process. In parallel experiments, the effect of changes in temperature under iso-ionic strength conditions was examined. With increasing temperature, different patterns of isothermal adsorption behaviour for both test proteins were observed, with the magnitude of these trends depending on the type of interaction involved between the immobilised ligand and the protein. Utilising first order Van't Hoff relationships to analyse the experimental data for these protein-ligand interactions, the apparent changes in enthalpy and entropy for these interactions have been derived from the dependency of the change in the apparent Gibbs free energy on 1/T.

Adsorption↗

Characterisation of silica-based heparin affinity sorbents from equilibrium binding studies on plasma fractions containing thrombin.

The binding properties of rigid heparin sorbents, synthesised by end-point-attachment of heparin onto aminopropylderivatised silica through reductive amination, were characterised through batch-adsorption studies employing human plasma fractions containing thrombin. Thrombin was quantified using a chromogenic assay that had been specially modified for these studies. These investigations yielded information regarding the maximum adsorption capacities/stoichiometries and binding affinities for thrombin present in complex protein mixtures. Of the two types of heparin-silica evaluated, heparin-Fractosil 1000, with a pore size of 1000 A, displayed a capacity of 2.4 mol of thrombin/mol of heparin (mol T-mol H). This stoichiometry was significantly higher than the value of 1.8 mol T-mol H obtained for the commercial soft gel heparin-Sepharose CL-6B. Furthermore, the heparin-Fractosil 1000 sorbents were superior in capacity and binding site accessibility to heparin-LiChroprep Si60 sorbents, where the smaller pore size of 60 A largely restricts the ligand-protein interactions to the outer surface of the sorbent particles. Nevertheless, heparin-LiChroprep Si60 sorbents were useful, in that they simulated a non-porous particle system, in which intra-pore diffusion effects are eliminated. The batch adsorption results with these sorbents indicated that the adsorption involved both high and low binding affinity characteristics. This bimodal binding mechanism was also evident with the commercial heparin-Sepharose sorbent. Binding stoichiometries and affinities in the high concentration range were similar to values reported for a largely non-specific electrostatic thrombin-heparin interaction. Dissociation constants in the nanomolar range were observed in the low concentrations range. This stronger binding affinity is more similar to highly specific bio-affinity interactions. Thus, the results indicated that heparin-thrombin interactions with these systems involve both a weak electrostatic and a strong biospecific interaction component.

Adsorption↗

Conformational analysis of neuropeptide Y-[18-36] analogs in hydrophobic environments.

The interactive and conformational behavior of a series of neuropeptide Y-[18-36] (NPY-[18-36]) analogs in hydrophobic environments have been investigated using reversed-phase high-performance liquid chromatography (RP-HPLC) and circular dichroism (CD) spectroscopy. The peptides studied comprised a series of 16 analogs of NPY-[18-36], each containing a single D-amino acid substitution. The influence of these single L-->D substitutions on the alpha-helical conformation of the NPY-[18-36] analogs in different solvent environments was determined by CD spectroscopy. Retention parameters related to the hydrophobic contact area and the affinity of interaction were determined with an n-octadecyl (C18) adsorbent. Structural transitions for all peptides were manifested as significant changes in the hydrophobic binding domain and surface affinity between 4 degrees C and 37 degrees C. The results indicated that the central region of NPY-[18-36] (residues 23-33) is important for maintenance of the alpha-helical conformation. Moreover, L-->D amino acid residue substitutions within the N- and C-terminal regions, as well as Asn29 and Leu30, do not appear to affect the secondary structure of the peptide. These studies demonstrate that RP-HPLC provides a powerful adjunct for investigations into the induction of stabilized secondary structure in peptides upon their interaction with hydrophobic surfaces.

Amino Acid Sequence↗

Isolation and characterization of human and rabbit sperm tail fibrous sheath.

Using mechanical and chemical dissection methods, fibrous sheath was isolated both from normal ejaculated human spermatozoa and from rabbit cauda epididymal spermatozoa. The same techniques did not produce a pure preparation of fibrous sheath from ejaculated rabbit spermatozoa, suggesting that further cross-linking and stabilization of sperm structures occurs in response to components of the seminal plasma. The isolation procedures were monitored by phase contrast microscopy and the purity of the fibrous sheath was verified by electron microscopy. Sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) of isolated human fibrous sheath revealed at least 14 protein bands of which the most intensely stained were of molecular weight 84, 72, 66.2, 57, 32 and 28.5 kDa. The rabbit fibrous sheath revealed at least 10 protein bands, of which the most intensely stained were 35.2, 32.7 and 28.5 kDa. The amino acid composition of the purified fibrous sheath from human and rabbit spermatozoa was similar, being high in aspartic acid and/or asparagine and glutamic acid and/or glutamine, serine, alanine, leucine, lysine and glycine, but low in histidine, tyrosine and isoleucine. This composition is similar to that reported for the rat and suggests that mammalian sperm tail fibrous sheaths are composed of similar types of proteins, although there are apparent differences in protein components between species.

Amino Acids↗

Conformational stability of a type II' beta-turn motif in human growth hormone [6-13] peptide analogues at hydrophobic surfaces.

The interactive properties of several peptides related to human growth hormone (hGH) [6-13] containing a type II' beta-turn motif have been investigated using reversed-phase high-performance liquid chromatography (RP-HPLC). Various chromatographic parameters related to the hydrophobic interactive surface area and binding affinity were measured over the range of temperatures between 5 and 85 degrees C. Variations in these parameters were consistent with significant differences in the relative stability of the type II' beta-turn structures of these peptidomimetics. The effect of changes in peptide conformation were also investigated through the analysis of band-broadening behaviour during the chromatographic process. Significant variations in bandwidth observed at discrete temperatures were related to the rate of interconversion between the type II' beta-turn and more extended conformers. These investigations further document the potential of RP-HPLC for monitoring subtle changes in peptide secondary structure at hydrophobic interfaces.

Chromatography, High Pressure Liquid↗

Comparison of the solution conformations of a human immunodeficiency virus peptidomimetic and its retro-inverso isomer using 1H NMR spectroscopy.

The solution conformations of the all L-alpha-peptide 1 and the corresponding retro-all D-alpha-peptide 2, two 20-metric peptides which generate antibodies that cross-react with the gp 120 envelop protein of human immunodeficiency virus-1 (HIV-1), have been investigated by high-field 1H NMR spectroscopy. Complete sequential and inter-residue interaction assignments were made from the 2D NMR spectra acquired at 500 MHz and 600 MHz in 40% deuterotrifluoroethanol (d3-TFE)/H2O at pH 2.3, and in 300 mM sodium dodecyl sulphate (SDS) in 100% D2O or 90% H2O/10% D2O at pH 2.6. Based on analysis of the nuclear Overhauser effect (NOE) and amide exchange data, peptide 1 and its retro-inverso isomer 2 in the polar solvent environment of 40% d3-TFE/H2O at pH 2.3 show very similar topological features. However, in the relatively non-polar 300 mM SDS micellar environment, peptides 1 and 2 exhibit differences in their solution structures in terms of the amide backbone and side-chain orientations. In particular, under the SDS micellar condition, peptide 1 maintains much of the secondary structure observed for this 20-mer peptide in 40% d3-TFE/H2O, pH 2.3, whereas peptide 2 adopts a more extended structure. These NMR results provide the first confirmation that the secondary structure of the all L-a-peptide 1 is maintained in both polar and non-polar environments, whereas the secondary structure and topology of the notionally equivalent retro-inverso isomer depends more on the solvent conditions. These results with the all L-a-peptide 1 and its retro-inverso isomer 2 provide important insight into the conformational influences of the C- and N-end group with L-alpha- and retro-D-alpha-isomer pairs in non-polar environments, and thus have general relevance to the design of bioactive retro-inverso peptidomimetic analogues related to immunogenic or hormonal peptides.

Amino Acid Sequence↗

Inhibin, activin and follistatin bind preferentially to the transformed species of alpha 2-macroglobulin.

alpha 2-Macroglobulin (alpha 2-M), a major serum glycoprotein, has been implicated as a low-affinity binding protein for inhibin and activin. In serum, alpha 2-M exists as two major species, a native form that is abundant and stable, and a transformed ('fast') species that is rapidly cleared from the circulation via alpha 2-M receptors. In this study inhibin, activin and their major binding protein follistatin were investigated for their ability to bind to the native or transformed species of purified human alpha 2-M. Using native PAGE and size exclusion chromatography, radiolabelled inhibin, activin and follistatin bound to the transformed alpha 2-M. Inhibin and follistatin did not bind significantly to native alpha 2-M, whereas activin was able to bind to the native species but with a lower capacity compared with that to transformed alpha 2-M. Under reducing conditions, binding of these hormones to alpha 2-M was abolished. These findings implicate alpha 2-M as a mechanism whereby inhibin, activin and follistatin may be removed from the circulation through alpha 2-M receptors, but also whereby activin can be maintained in the circulation through its ability to bind to native alpha 2-M.

Activins↗

The use of crude tissue section lysates for PCR assessment of gene copy number with human tumour biopsy samples.

This paper reports the development of experimental procedures for the use of crude tissue section lysates, in conjunction with a non-radioactive polymerase chain reaction-high performance ion-exchange chromatographic (PCR/HPIEX) method, for the quantitative assessment of gene copy number in human biopsy samples. In particular, these methods have been established for the assessment of gene amplification with the FGF-2, FGF-3, FGF-4 and c-erb-B2 genes with the a single copy IFN-gamma gene used as an internal control. In principle, the same procedures could, in general, be simultaneously applied for monitoring the amplification or deletion of other oncogenes as well as normal genes in mammalian cells. Procedures to optimise the precision of the analysis have been examined, including the influence of the oligonucleotide primer concentrations, cycle number, extension temperature, and method of pre-treatment of the tissue sample with proteinase K. The results confirm that crude tissue lysates, rather than purified DNA samples, can be reliably employed, thus extending the scope of non-radioactive PCR/HPIEX methods for the assessment of aberrant gene copy number to biological samples such as tumour biopsy tissues.

Adenocarcinoma↗

Application of an optimised reverse transcriptase-polymerase chain reaction method to determine the cDNA nucleotide sequence of porcine basic fibroblast growth factor.

In the present investigation, oligonucleotide primers of high hybridisation stringency have been used in combination with optimised reverse transcriptase-polymerase chain reaction (RT-PCR) methods for the determination of the cDNA sequence corresponding to porcine FGF-2 mRNA present in brain and uterine tissue. Application of these optimised methods have overcome previous limitations associated with the low abundance of the porcine FGF-2 mRNA, and allowed as little as 100 micrograms of tissue to be employed to generate the complete cDNA nucleotide sequences as well as to provide specific template fragments selected for their suitability in subsequent ligation and mutagenesis studies with conventional expression vectors. Comparisons of the cDNA nucleotide and the deduced amino-acid sequence of porcine FGF-2 and the known FGF-2s from other species have indicated nucleotide sequence homologies of 95.5% with the bovine, 94.7% with the human and 88.7% with the rat FGF-2 cDNA whilst amino-acid sequence homologies of 100% with the bovine, 98.7% with the human and 96.8% with the rat FGF-2, respectively, were found. Based on these investigations, application of analogous strategies and methods with low abundance mRNAs related to other members of this family of growth factors, as well as very low abundance mRNAs of other protein growth factor, in the pig should now be readily realised.

Amino Acid Sequence↗

Structural and functional characterisation of hFSH and hLH isoforms.

Human follicle-stimulating hormone (hFSH) and luteinizing hormone (hLH) are gonadotropins which are secreted as multiple forms by the pituitary. Evidence supporting the structural and functional heterogeneity of 15 purified hFSH isoforms and 20 purified hLH isoforms from pituitary extracts will be presented. Gonadotropin isoforms were purified by a combination of preparative isoelectric focusing and ion-exchange chromatography. The protein mass of each isoform was determined by amino acid analysis, which also correlated (data for hLH) (r = 0.999, P < 0.001, n = 15) with the UV area under the curve at 280 nm of the isoforms following gel-filtration HPLC. The alpha and beta subunits of FSH and LH were shown to be intact by SDS-PAGE under reducing condition, with no evidence of proteolytic nicking or presence of contaminating proteins. hFSH radioreceptor activity varied over a seven-fold range, and a positive correlation (r = 0.85, P < 0.001, n = 9) was observed between FSH receptor activity and the sialic acid (SA) content (1.5-13.7 mol SA/mol hFSH) of the isoforms, as determined by an HPLC-based microfluorometric assay. FSH in vitro activities varied over a similar range with a high correlation (r = 0.82, n = 15) with receptor activities, suggesting that the initial association of the hormone with the receptor is the key interaction with less differences attributed to subsequent effects in the signaling pathway. A similar result was seen with the hLH isoforms. To explore FSH/LH in vivo, the circulating half-life (LH/FSH) and the in vivo bioactivity (LH) using an acute in vivo assay was investigated. The clearance of hLH and hFSH showed a bi-exponential pattern for all isoform preparations with the proportion of the slower dissociating component (t 1/2 50-60 min) increasing three-fold with increasing sialic acid content of the isoform. The more rapidly cleared component (t 1/2 approx 10 min) is attributed to hepatically cleared gonadotropin, rather than gonadotropin equilibration between body compartments. The in vivo assay procedure for LH was based on the 24 h integrated plasma testosterone levels in rats following administration of graded doses of hLH isoform or standard. A 16-fold range in vivo activities between LH isoforms (n = 14) was observed. A comparison between hLH in vitro and in vivo activities showed a good correlation (r = 0.75) with the slope of the regression line (1.39) not significantly different from unity. These results suggest that in this acute in vivo assay method, the differences in circulating half-lives between hLH isoforms although large is not a key factor in their in vivo activity. However, in chronic in vivo assay systems the differences in clearance rates between isoforms may be important in their subsequent biological response. It is concluded that structural heterogeneity of FSH and LH contributes to functional differences, with a key interaction occurring at the receptor level. The contribution of sialic acid to these activities was also investigated.

Animals↗

Protein interaction with immobilized metal ion affinity ligands under high ionic strength conditions.

An investigation into the adsorption behavior under batch equilibrium binding conditions of hen egg white lysozyme (HEWL) with the immobilized metal ion affinity chromatographic adsorbent, Cu(2+)-IDA Sepharose CL-4B, in the presence of high concentrations of NaCl or KCl has been undertaken. When the concentration of NaCl or KCl in the adsorption buffer was < or = 0.2 M, the adsorption data correlated with predictions based on the Langmuir model. However, when the salt concentration was > or = 0.5 M, the adsorption data appeared to follow the Freundlich-Langmuir model under these higher ionic strength conditions. Under elevated ionic strength conditions, the protein-ligand interactions were shown to involve positive cooperativity by Scatchard plot analysis of the experimental data. The number, n, of interacting protein molecules increased with the salt concentration, while the apparent dissociation constant Kd under these high ionic strength conditions was less dependent on the type of salt present in the adsorption buffer. These studies reveal that the binding of Cu(2+)-IDA Sepharose CL-4B to HEWL acceptor molecules under conditions of high ionic strength is characteristic of general heterogeneous interactions, whereby the immobilized metal ion affinity chromatography (IMAC) ligands bind to a protein acceptor undergoing isodesmic indefinite self-association and multisite attachment. As a consequence, these results on the adsorption behavior of HEWL have important general implications for the preparative use of immobilized metal ion affinity adsorbents in packed and expanded bed systems, particularly with regard to the resolution and productivity of the separation for the target protein. In addition, the results from these studies are relevant to investigations involving analytical affinity chromatographic or biosensor assessment of the interaction of proteins with immobilized IMAC ligands when high ionic strength equilibration feedstocks or conditions are employed.

Adsorption↗

Contribution of specific disulphide bonds to two epitopes of thyrotropin beta-subunit associated with receptor recognition.

In previous studies, we have shown that two epitopes of bovine thyrotropin beta-subunit that are recognised by the monoclonal antibodies designated mAb 279 and mAb 299 are also associated with the receptor-binding site of bovine thyrotropin. The present investigation has examined the role of the six disulphide bonds of bovine thyrotropin beta-subunit in the conformational stabilisation of these two epitopes, and hence assessed the relative contribution that these disulphide bonds make to the stabilisation of the receptor-binding region of the beta-subunit. The experimental procedure involved the production of several bovine thyrotropin beta-subunit-related derivatives in which an increasing number of the disulphide bonds were selectively reduced with dithiothreitol and alkylated with iodoacetic acid. Antibody-binding properties of these derivatives were then evaluated in thyrotropin beta-subunit-specific immunoassays based on the use of the well characterised mAb 279 and mAb 299, to determine the effect of disulphide bond reduction and alkylation on each epitopic specificity. In separate experiments, the residual disulphide bonds that remained intact following these selective partial reductive alkylation procedures were then fully reduced and alkylated with the fluorescent reagent 5-N-[(iodoacetamidoethyl)amino]naphthalene 1-sulphonic acid. The relative contribution of individual disulphide bonds in the stabilisation of each epitope could then be assessed after application of reverse-phase HPLC peptide mapping methods. Epitope recognition by mAb 279 was not dependent on the preservation of the so-called determinant loop Cys88-Cys95 disulphide bond nor directly involved binding interactions via the Cys2-Cys52, Cys27-Cys83, and Cys31-Cys85 disulphide bonds. However, the experimental results indicated that the mAb 279 epitope was stabilised by the Cys19-Cys105 and Cys16-Cys67 disulphide bonds, which is consistent with other data on the role of the C-terminal region of the thyrotropin beta-subunit in this epitope. In contrast, the presence of an intact Cys88-Cys95 disulphide bond was required for the stabilisation of the mAb 299 epitope, although the location of this disulphide bond is distal to the hairpin loop structure that constitutes the mAb 299 epitope. These results on the relative contribution of these disulphide bonds are also discussed in terms of their relationship to the stabilisation of the predicted region of bovine thyrotropin beta-subunit involved in receptor binding.

Amino Acid Sequence↗

Characterisation of silica-based heparin-affinity adsorbents through column chromatography of plasma fractions containing thrombin.

Different heparin-silicas, synthesised in this laboratory via directional end-point attachment of heparin (H) onto various amino-derivatised silicas, have been evaluated in packed-bed and expanded-bed column chromatographic experiments using crude preparations of the therapeutic protein, thrombin (T). Adsorbent capacities, determined through batch adsorption experiments, were verified by employing frontal analysis in packed-bed systems. The performance of these adsorbents was also investigated in terms of thrombin purification factors and recoveries. The potential of the heparin-silicas was further examined in the expanded-bed column chromatographic mode using a scaled-up procedure. With heparin-Fractosil 1000 adsorbents, capacities of around 100,000 U thrombin/ml adsorbent could be achieved. Heparin-Fractosil 1000 adsorbents of intermediate heparin content (around 4 mg heparin/ml sorbent) displayed binding stoichiometries similar to that of the commercial heparin-Sepharose (2.6-2.7 mol T/mol H). Furthermore, binding stoichiometries were largely unaffected by increasing the heparin content on the heparin-Fractosil 1000 adsorbents from 0.8 to 4.6 mg of heparin/ml of sorbent. This result suggests that optimal binding site accessibilities for the thrombin-heparin interaction occurs at lower ligand density values. The binding capacity values determined from frontal analysis were confirmed by the recovery data, thus indicating minimal irreversible adsorption. Specific activities of ca. 2100 U/mg were obtained for thrombin when affinity-purified on these heparin-LiChroprep Si60 or heparin-Fractosil 1000 adsorbents. These values were higher than the maximum achievable purity obtained through alternative, multi-step chromatographic purification procedures reported by other investigators. These results indicated that the packed-bed performances with these silica-based adsorbents were superior to currently available commercial soft gel adsorbents, with the more dense heparin-silicas exhibiting very good potential for use in expanded-bed applications.

Adsorption↗

Studies on the expansion characteristics of fluidised beds with silica-based adsorbents used in protein purification.

In these investigations, a detailed examination of the fluid dynamic characteristics of expanded beds containing silica-based chromatographic adsorbents has been carried out. In particular, the effects of the column accessories such as distributor design and the flow-rate on the dispersion coefficient of the adsorbent particles have been examined. The experimental data have been analysed in terms of residency time effects, fluid flow characteristics and physical properties of the adsorbent particles using several different theoretical models. In common with experience of packed-bed systems, the results confirm that the optimisation of the dynamic capacities as well as the dynamic adsorption rates of adsorbents in expanded-bed systems must take into account column design characteristics as well as the physical/chemical features of the adsorbents, if the highest productivities of expanded-bed/fluidisation procedures are to be achieved with crude feedstocks from biotechnological applications.

Adsorption↗

Stability studies on pig heart mitochondrial malate dehydrogenase: the effect of salts and amino acids.

The effect of different salts and amino acids on the thermal stability and quaternary conformation of pig heart mitochondrial malate dehydrogenase (phm-MDH) in solution has been determined. The effectiveness of salts of anions in the stabilisation of phm-MDH followed the order: Citrate > SO(4)2- > or = Tartrate > Phosphate > F-, CH3COO- > Cl- > Br-. Anions above and including Cl- in this series were increasingly effective in stabilising phm-MDH with a rise in salt concentration from 0.05-2 M, whilst Br- was destabilising under similar conditions. The effect of potassium salts of acetate, chloride and bromide at a concentration of 1 M on the quaternary conformation of phm-MDH correlated also with the relative order of anion stabilisation above, with the anions higher in the series increasingly promoting the formation of the dimeric conformation of the enzyme. The cations of the corresponding salts had a relatively neutral (Cs+, K+, Na+, (CH3)4N+, NH4+) to a destabilising ((CH3)4N+, NH4+, Li+) effect on phm-MDH. Potassium ferrocyanide and potassium ferricyanide conferred complex, concentration dependent effects on the stability of phm-MDH, unlike the salts described above. Salts of amino acids were effective in the stabilisation of phm-MDH against temperature induced changes, following the order: NaGlutamatec = NaAspartate > NaGlycinate > lysine. HCl > arginine. HCl. The magnitudes and trends of the effects of these salts and amino acids on the stability and quaternary structure of phm-MDH were observed to correlate well with considerations based on the Hofmeister series of anions and solvophobic concepts as they apply to the influence of co-solvents at intermediate to higher concentrations. Other, more specific effects were also evident in the stabilisation and destabilisation of phm-MDH by low concentrations of the salts, as noted most particularly in the presence of potassium ferrocyanide and potassium ferricyanide.

Amino Acids↗