PubMed Health⌕ Search

Biomedical subjects

M T Peracchia

Publications and source records attributed to M T Peracchia.

12 recordsLinked to original sources
PubMed2000

Design of folic acid-conjugated nanoparticles for drug targeting.

The new concept developed in this study is the design of poly(ethylene glycol) (PEG)-coated biodegradable nanoparticles coupled to folic acid to target the folate-binding protein; this molecule is the soluble form of the folate receptor that is overexpressed on the surface of many tumoral cells. For this purpose, a novel copolymer, the poly[aminopoly(ethylene glycol)cyanoacrylate-co-hexadecyl cyanoacrylate] [poly(H(2)NPEGCA-co-HDCA)] was synthesized and characterized. Then nanoparticles were prepared by nanoprecipitation of the obtained copolymer, and their size, zeta potential, and surface hydrophobicity were investigated. Nanoparticles were then conjugated to the activated folic acid via PEG terminal amino groups and purified from unreacted products. Finally, the specific interaction between the conjugate folate-nanoparticles and the folate-binding protein was evaluated by surface plasmon resonance. This analysis confirmed a specific binding of the folate-nanoparticles to the folate-binding protein. This interaction did not occur with nonconjugated nanoparticles used as control. Thus, folate-linked nanoparticles represent a potential new drug carrier for tumor cell-selective targeting.

Capsules↗
PubMed2000

Near infrared with principal component analysis as a novel analytical approach for nanoparticle technology.

PURPOSE: To progress in the characterization of a poly(MePEGcyanoacrylate-co-hexadecylcyanoacrylate) (poly(PEGCA-co-HDCA) copolymer and the nanoparticles formed from this copolymer. METHODS: Poly(PEGCA-co-HDCA) at a MePEG/hexadecyl ratio of 1:4 was investigated by 1H-NMR and near infrared spectroscopy. The nanoparticle suspensions, obtained by the methods of nanoprecipitation or emulsion--solvent evaporation, as well as the crude nanoparticles and their dispersion medium--were analyzed by MePEG measurement, 1H-NMR, and near infrared spectroscopy. RESULTS: The 1H-NMR results showed that the (poly(PEGCA-co-HDCA) copolymer obtained bore lateral hydrophilic MePEG chains and lateral hydrophobic hexadecyl chains in a final ratio of 1:4. However, this ratio, although reproducible from batch to batch, represented only a mean value for different molecular species. Indeed, our results demonstrated the formation of more hydrophobic poly(alkyl-cyanoacrylate) oligomers (with a higher content of hexadecyl chains) and other more hydrophilic oligomers (with a higher MePEG content). Only the more hydrophobic oligomers were able to form solid pegylated nanoparticles. As far as these nanoparticles were concerned, determination of their MePEG content allowed the calculation of a distance of 1.2 nm and 1.05 nm between 2 grafted MePEG chains at the nanoparticle surface, when obtained by nanoprecipitation and emulsion-solvent evaporation, respectively. Moreover, when the same copolymer batch was used, different nanoparticles were obtained according to the preparation method, as seen by near infrared spectroscopy. CONCLUSIONS: The nanoparticles obtained by nanoprecipitation or emulsion-solvent evaporation of poly(PEGCA-co-HDCA) 1:4 copolymer displayed a different supramolecular organization, as evidenced by the near infrared spectroscopy results. Moreover, these nanoparticles showed surface characteristics compatible with a long circulating carrier.

Colloids↗
PubMed1999

Stealth PEGylated polycyanoacrylate nanoparticles for intravenous administration and splenic targeting.

The aim of the present work was to investigate the biodistribution characteristics of PEG-coated polycyanoacrylate nanoparticles prepared by the nanoprecipitation/solvent diffusion method using the previously synthesized poly(MePEGcyanoacrylate-hexadecylcyanoacrylate) copolymer. It was observed that [14C]-radiolabeled PEGylated nanoparticles remained for a longer time in the blood circulation after intravenous administration to mice, compared to the non-PEGylated poly(hexadecylcyanoacrylate) (PHDCA) nanoparticles. Furthermore, hepatic accumulation was dramatically reduced, whereas a highly increased spleen uptake was shown. The PEGylation degree of the polymer seemed not to affect the in vivo behavior of the nanoparticles, whereas previously obtained in vitro data have shown a modification of plasma protein adsorption depending on the density of PEG at the surface of the particles. Moreover, the study of the in vitro cytotoxicity of the nanoparticles revealed that the PEGylation of the cyanoacrylate polymer reduced its toxicity. These results open up interesting perspectives for the targeting of drugs to other tissues than the liver.

Animals↗
PubMed1999

Visualization of in vitro protein-rejecting properties of PEGylated stealth polycyanoacrylate nanoparticles.

The in vitro protein-rejecting properties of PEG-coated polyalkylcyanoacrylate (PACA) nanoparticles were for the first time visualized after freeze-fracture of the nanoparticles pre-incubated with fibrinogen as a model blood protein. The reduced protein association to the nanoparticles was evidenced also by two-dimensional PAGE after incubation of the nanoparticles with human plasma. In vivo experiments showed the 'stealth' long-circulating properties of the PEGylated nanoparticles after intravenous administration to mice. Thus, the images obtained after nanoparticle-protein incubation were predictive of the behavior observed in vivo. In conclusion, freeze-fracture analysis represents a novel and original qualitative approach to investigate the interactions between proteins and particulate systems.

Adsorption↗
PubMed1998

Pegylated nanoparticles from a novel methoxypolyethylene glycol cyanoacrylate-hexadecyl cyanoacrylate amphiphilic copolymer.

PURPOSE: The aim of this work was to develop PEGylated poly(alkylcyanoacrylate) nanoparticles from a novel methoxypolyethyleneglycol cyanoacrylate-co-hexadecyl cyanoacrylate copolymer. METHODS: PEGylated and non-PEGylated nanoparticles were formed by nanoprecipitation or by emulsion/solvent evaporation. Nanoparticles size, zeta potential and surface hydrophobicity were investigated. Surface chemical composition was determined by X-ray photoelectron spectroscopy. Nanoparticle morphology was investigated by transmission electron microscopy after freeze-fracture. Nanoparticles cytotoxicity was assayed in vitro, onto mouse peritoneal macrophages. Cell viability was determined through cell mitochondrial activity, by a tetrazolium-based colorimetric method (MTT test). Finally, the degradation of PEGylated and non-PEGylated poly(hexadecyl cyanoacrylate) nanoparticles was followed spectrophotometrically during incubation of nanoparticles in fetal calf serum. RESULTS: Monodisperse nanoparticles with a mean diameter ranging between 100 and 200 nm were obtained using nanoprecipitation or emulsion/solvent evaporation as preparation procedures. A complete physico-chemical characterization, including surface chemical analysis, allowed to confirm the formation of PEG-coated nanoparticles. The PEGylation of the cyanoacrylate polymer showed reduced cytotoxicity towards mouse peritoneal macrophages. Furthermore, the presence of the PEG segment increased the degradability of the poly(hexadecyl cyanoacrylate) polymer in presence of calf serum. CONCLUSIONS: We succeeded to prepare PEGylated nanoparticles from a novel poly(methoxypolyethyleneglycol cyanoacrylate-co-hexadecyl cyanoacrylate) by two different techniques. Physico-chemical characterization showed the formation of a PEG coating layer. Low cytotoxicity and enhanced degradation were also shown.

Animals↗
PubMed1997

Development of sterically stabilized poly(isobutyl 2-cyanoacrylate) nanoparticles by chemical coupling of poly(ethylene glycol).

To develop rapidly biodegradable "stealth" nanoparticles, a physicochemical investigation was done on the formation of PEG-coated poly(isobutyl 2-cyanoacrylate) (PIBCA) nanoparticles. In particular, this study focused on the effect of polymerization conditions on particle size and surface properties, such as charge and hydrophilicity. Among the parameters involved, the pH of the polymerization medium was found to be a key to control the preparation of PEG-coated nanoparticles. Currently, poly(alkylcyanoacrylate) (PACA) nanoparticles are prepared in H2O at pH 2.5, the most appropriate for producing nanoparticles with a mean diameter of 200 nm and an unimodal size distribution. The presence of PEG in the polymerization medium was shown to affect particles formation: only a pH value < 1.5 led to the formation of colloidal nanoparticles, and slight pH variations dramatically affected particle size and PEG association. Polymer chemistry investigations and chemical determination of PEG strongly suggest that PEG associated with nanoparticles was well copolymerized with PIBCA.

Biocompatible Materials↗
PubMed1997

Complement consumption by poly(ethylene glycol) in different conformations chemically coupled to poly(isobutyl 2-cyanoacrylate) nanoparticles.

There is an increasing interest to develop injectable drug polymeric carriers not recognizable by the body as foreign particles and eliminated very quickly from the bloodstream. A polyethylene glycol (PEG)-coating onto injectable particles showed to reduce either protein adsorption and complement consumption, as a function of the PEG density. In this work we compared the complement rejecting ability of PEG in different conformations coupled to polyisobutylcyanoacrylate (PIBCA) nanoparticles, through the analysis of the residual hemolytic capacity of the human serum after contact with the particles. Nanoparticles were formed by chemical coupling of PEG during emulsion/polymerization of isobutylcyanoacrylate (IBCA). Nanoparticles characterization included an investigation of their surface properties, such as hydrophilicity and conformational mobility of the PEG chains grafted on the nanoparticles surface, and PEG total content. The polymerization kinetics of IBCA in presence of PEG or MePEG were also studied. Complement consumption was observed to be very sensitive to the number of particles in contact with human serum, as well as to the PEG conformation, suggesting PEG configuration could affect the particle exposed surface.

Complement System Proteins↗
PubMed1997

Nanotechnology for biomaterials engineering: structural characterization of amphiphilic polymeric nanoparticles by 1H NMR spectroscopy.

Nanoparticles composed of diblock poly(D,L-lactide-co-glycolide)-poly(ethylene glycol) (PLGA-PEG) or a branched, multiblock PLA-(PEG)3 were prepared by the single emulsion technique. Results of previous studies of these nanoparticles suggested that their structure is of the core-corona type with a polyester core and an outer PEG coating. In the present study, 1H NMR spectroscopy was utilized to provide direct evidence of the structure of these nanoparticles suspended in an aqueous environment. The results confirm the existence of the core-corona structure under these conditions, and show that the PEG moieties extend out from the nanoparticle core into the aqueous environment, and exhibit chain mobility similar to that of PEG in solution.

Biocompatible Materials↗
PubMed1996

Delivery of nasal powders of beta-cyclodextrin by insufflation.

PURPOSE: Delivery of nasal powders of granulated beta-cyclodextrin by insufflation was studied in order to find the relationship between powder properties and delivery behavior. METHODS: Three nasal powder formulations, prepared by granulating beta-cyclodextrin with different binders, were delivered from a powder insufflation device, in which the dose to be emitted was loaded in a gelatin capsule. The delivery sequence of powder was recorded and characterized using an image analysis program. RESULTS: Particle size was the main parameter affecting nasal powder delivery, both as to the amount of dose sprayed and the aspect of cloud produced. Between 50-150 mu m of particle size a substantial change in delivery behavior of powders was observed. Powder of around 100 mu m in size showed useful insufflation characteristics for nasal delivery. Bioavailability of nasal formulations of progesterone/beta-cyclodextrin powders was discussed in term of delivery behavior. CONCLUSIONS: The formulation approaches for improving nasal delivery of powders require the use of size optimized carriers. Insufflation of powders over 50 mu m can favour the particle deposition by impaction, whereas for powders below 50 mu m, deposition by sedimentation is moved. beta-cyclodextrin is a suitable carrier for achieving high systemic availability following nasal administration of powder formulations.

Administration, Intranasal↗
PubMed1994

Biodegradable long-circulating polymeric nanospheres.

Injectable nanoparticulate carriers have important potential applications such as site-specific drug delivery or medical imaging. Conventional carriers, however, cannot generally be used because they are eliminated by the reticulo-endothelial system within seconds or minutes after intravenous injection. To address these limitations, monodisperse biodegradable nanospheres were developed from amphiphilic copolymers composed of two biocompatible blocks. The nanospheres exhibited dramatically increased blood circulation times and reduced liver accumulation in mice. Furthermore, they entrapped up to 45 percent by weight of the drug in the dense core in a one-step procedure and could be freeze-dried and easily redispersed without additives in aqueous solutions.

Animals↗
PubMedDate not supplied

Controlled release dosage forms: from ground to space.

Controlled release of drugs is one of the most significant advances in pharmacy. Due to the proposition of new routes for drug administration, today it is considered as a part of 'drug delivery'. Developments in biotechnology producing natural molecules, peptides and proteins have allowed high activity substances that require careful formulation for administration. Drug delivery is the discipline striving to sole the problem of optimisation of drug efficacy. In this contribution the last 25 years of drug delivery research have been examined pointing out the most significant break-through steps.

Delayed-Action Preparations↗