Biomedical subjects

Müge Andaç

Publications and source records attributed to Müge Andaç.

3 recordsLinked to original sources

PubMed2006

Ion-imprinted beads for molecular recognition based mercury removal from human serum.

The aim of this study is to prepare ion-imprinted polymers which can be used for the selective removal of mercury ions [Hg(2+)] from human serum. N-Methacryloyl-(L)-cysteine (MAC) was chosen as the complexing monomer. In the first step, Hg(2+) was complexed with MAC and the Hg(2+)-imprinted poly(hydroxyethyl methacrylate-N-methacryloyl-(l)-cysteine) (MIP) beads were synthesized by suspension polymerization. After that, the template ions (i.e., Hg(2+)) were removed using thiourea (0.5%, v/v) in 0.05 M HCl. The specific surface area of the MIP beads was found to be 59.04 m(2)/g with a size range of 63-140 micro m in diameter and the swelling ratio was 91.5%. According to the elemental analysis results, the MIP beads contained 87.0 micro mol MAC/g polymer. The maximum adsorption capacity was 0.45 mg Hg(2+)/g beads. The applicability of two kinetic models including pseudo-first order and pseudo-second order model was estimated on the basis of comparative analysis of the corresponding rate parameters, equilibrium capacity and correlation coefficients. Results suggest that chemisorption processes could be the rate-limiting step in the adsorption process. The relative selectivity coefficients of MIP beads for Hg(2+)/Cd(2+), Hg(2+)/Zn(2+) were 14.7 and 21.5 times greater than the non-imprinted (NIP) matrix, respectively. The MIP beads could be used many times without decreasing in their adsorption capacities significantly.

Cations, Divalent↗

PubMed2004

Molecular recognition based cadmium removal from human plasma.

Molecularly imprinted polymers (MIPs) are easy to prepare, stable, inexpensive and capable of molecular recognition. MIPs can be considered as affinity separation media. Cadmium is a carcinogenic and mutagenic element. There is no specific treatment available for acute or chronic metal poisoning. Besides supportive therapy and hemodialysis, metal poisoning is often treated with commercially available chelating agents including EDTA and dimercaprol. However, there is histopathological evidence for increased toxicity in animals when these agents are utilized. The aim of this study is to prepare ion-imprinted polymers, which can be used for the selective removal of Cd2+ ions from Cd2+-overdosed human plasma. N-Methacryloly-(L)-cysteinemethylester (MAC) was chosen as the complexing monomer. In the first step, Cd2+ was complexed with MAC and the Cd2+ -imprinted p(HEMA-MAC) beads were synthesized by suspension polymerization. After that, the template (i.e., Cd2+ ions) were removed using 0.1 M thiourea solution. The specific surface area of the Cd2+ -imprinted poly(HEMA-MAC) beads was found to be 19.4 m2/g with a size range of 63-140 microm in diameter and the swelling ratio was 78%. According to the elemental analysis results, the beads contained 42.1 micromol MAC/g polymer. The maximum adsorption capacity was 32.5 micromol Cd2+/g beads. The relative selectivity coefficients of imprinted beads for Cd2+/Pb2+ and Cd2+/Zn2+ were 7.8 and 1683 times greater than non-imprinted matrix, respectively. The Cd2+-imprinted poly(HEMA-MAC) beads could be used many times without decreasing their adsorption capacities significantly.

Adsorption↗

PubMed2004

Performance of dye-affinity beads for aluminium removal in magnetically stabilized fluidized bed.

BACKGROUND: Aluminum has recently been recognized as a causative agent in dialysis encephalopathy, osteodystrophy, and microcytic anemia occurring in patients with chronic renal failure who undergo long-term hemodialysis. Only a small amount of Al(III) in dialysis solutions may give rise to these disorders. METHODS: Magnetic poly(2-hydroxyethyl methacrylate) (mPHEMA) beads in the size range of 80-120 microm were produced by free radical co-polymerization of HEMA and ethylene dimethacrylate (EDMA) in the presence of magnetite particles (Fe3O4). Then, metal complexing ligand alizarin yellow was covalently attached onto mPHEMA beads. Alizarin yellow loading was 208 micromol/g. These beads were used for the removal of Al(III) ions from tap and dialysis water in a magnetically stabilized fluidized bed. RESULTS: Al(III) adsorption capacity of the beads decreased with an increase in the flow-rate. The maximum Al(III) adsorption was observed at pH 5.0. Comparison of batch and magnetically stabilized fluidized bed (MSFB) maximum capacities determined using Langmuir isotherms showed that dynamic capacity (17.5 mg/g) was somewhat higher than the batch capacity (11.8 mg/g). The dissociation constants for Al(III) were determined using the Langmuir isotherm equation to be 27.3 mM (MSFB) and 6.7 mM (batch system), indicating medium affinity, which was typical for pseudospecific affinity ligands. Al(III) ions could be repeatedly adsorbed and desorbed with these beads without noticeable loss in their Al(III) adsorption capacity. CONCLUSIONS: Adsorption of Al(III) demonstrate the affinity of magnetic dye-affinity beads. The MSFB experiments allowed us to conclude that this inexpensive sorbent system may be an important alternative to the existing adsorbents in the removal of aluminium.

Journal Article↗