PubMed Health⌕ Search

Biomedical subjects

Magnus Nydén

Publications and source records attributed to Magnus Nydén.

8 recordsLinked to original sources

Complexation chemistry for tuning release from polymer coatings.

The strategy of metal ion complexation is employed to design a delivery system for an antifouling agent (AFA) in marine paints. A poly(1-vinylimidazole-co-methyl methacrylate) copolymer (PVM), together with Cu2+ or Zn2+ formed a PVM-M2+ complex. The AFA, Medetomidine, was then coordinated into the complex. The coordination strength was investigated in solution by 1H NMR and on solid surfaces by using the Quartz Crystal Microbalance with Dissipation monitoring technique (QCM-D) and Surface Plasmon Resonance (SPR). From the 1H NMR experiments strong interactions were observed between Cu2+ and the PVM-polymer and between Medetomidine and the PVM-Cu2+ complex. From the QCM-D and SPR measurements it was shown that Cu2+, compared to Zn2+, exhibited a larger affinity for the PVM-copolymer surface that resulted in higher degree of swelling of the polymer film. Large amounts of Medetomidine were adsorbed to the PVM-Cu2+ complex resulting in low desorption rates. However, the adsorbed amount of Medetomidine was lower to the Zn2+ doped polymer and a higher desorption rate was observed. These results indicate the possibility of tuning the release of Medetomidine by altering the coordinating metal ion, which may prove to be favorable in a paint formulation.

Copper↗

Influence of kappa-carrageenan gel structures on the diffusion of probe molecules determined by transmission electron microscopy and NMR diffusometry.

The influence of the microstructures of different kappa-carrageenan gels on the self-diffusion behavior of poly(ethylene glycol) (PEG) has been determined by nuclear magnetic resonance (NMR) diffusometry and transmission electron microscopy (TEM). It was found that the diffusion behavior was determined mainly by the void size, which in turn was defined by the state of aggregation of the kappa-carrageenan. The kappa-carrageenan concentration was held constant at 1 w/w%, and the aggregation was controlled by the amount of potassium and/or sodium chloride and, for samples containing potassium, also by the cooling rate. Gels containing potassium formed microstructures where kappa-carrageenan strands are rather evenly distributed over the image size, while sodium gels formed dense biopolymer clusters interspersed with large openings. In a gel with small void sizes, relatively slow diffusion was found for all PEG sizes investigated. Extended studies of the self-diffusion behavior of the 634 g mol(-)(1) PEG showed that there is a strong time dependence in the measured PEG diffusion. An asymptotic lower time limit of the diffusion coefficient was found in all gels when the diffusion observation time was increased. According to the ratio, D/D(0), where D(0) is the diffusion coefficient in D(2)O and D is the diffusion coefficient in the gels, the gels could be divided into three classes: small, medium, and large voids. For quenched kappa-carrageenan solutions with salt concentrations of 20 mM K(+), 100 mM K(+), or 20 mM K(+)/200 mM Na(+) as well as slowly cooled solutions with only 20 mM K(+), D/D(0) ratios between 0.18 and 0.29 were obtained. By quenching a kappa-carrageenan solution with 100 mM K(+), the D/D(0) was 0.5, while D/D(0) ratios between 0.9 and 1 were obtained in a quenched solution with 250 mM Na(+) and slowly cooled samples with 20 mM K(+)/200 mM Na(+) or 250 mM Na(+).

Carrageenan↗

Aggregation behavior and size of lipopolysaccharide from Escherichia coli O55:B5.

Dynamic light scattering, steady-state fluorescence, NMR diffusometry and cryo-TEM have been used to gain more insight into the aggregation behaviour of LPS from Escherichia coli O55:B5. Knowledge of this behaviour of the amphiphilic LPS molecule is in many cases of importance for the design of experiments and interpretation of results when using LPS in solution. The aim of this work was to study the aggregation and determine the aggregate size of E. coli O55:B5. The mean hydrodynamic radius of the LPS aggregates was determined by NMR diffusometry and dynamic light scattering to 14 and 26 nm, respectively. The cryo-TEM technique revealed predominantly spherical aggregates of 9-19 nm. We wish to report 10 microg/ml as the aggregation start for LPS E. coli O55:B5 in PBS buffer, pH 7.2. We suggest that the aggregation is a continuous process that starts at 10 microg/ml and proceeds up to 300 microg/ml.

Escherichia coli↗

Water-based latex dispersions 4. Exchange dynamics and residence times of nonylphenol ethoxylate in concentrated latex dispersions.

The equilibrium residence times of the nonionic surfactant nonylphenol ethoxylate (NP100) in a latex dispersion were determined using NMR diffusometry. At 16% w/w particle concentration and 0.12, 0.43 and 0.81% w/w NP100, the residence times of the surfactant were 0.16, 1.02 and 4.73 s in solution (tau(A)) and 0.3, 0.37 and 0.61 s on the surface of the particles (tau(B)), respectively. At even higher particle concentration (>45% w/w), tau(A) and tau(B) were 1.47 and 2.2 s. Calculating the number of collisions that ought to result in adsorbed species, at 16% w/w, only 2, 5 and 2 per thousand (corresponding to 0.12, 0.43 and 0.81% w/w NP100) resulted in adsorption, whereas at >45% w/w, only 12 per thousand resulted in adsorption, which suggested that the surfactant was irreversibly adsorbed on the particles. The small increase in collision frequency with increased particle concentration could be a result of a diffusion controlled adsorption, while an energy barrier for desorption controlled the overall exchange dynamics in the dispersion. The slow dynamics in the dispersion was controlled, mainly by the nonylphenol group, which gave NP100 a strong preference to surfaces. In addition, the chain length of the poly(ethylene glycol) (PEG) group changed the solution behavior from being that of a typical surfactant to that of a polymer.

Ethylene Glycols↗

Lipopolysaccharide removal by a peptide-functionalized surface.

Five peptides: BPI(85-109); CAP18(106-137); endotoxin inhibitor (EI); GQ33 and GQ33C, derived from lipopolysaccharide (LPS)-binding molecules were investigated for LPS-binding ability with a view to a potential use in extracorporeal therapy. The surface plasmon resonance technique (SPR) was used to monitor the interaction between LPS in solution and the surface-immobilized peptides. The peptides were covalently bound to a model dextran surface via inherent amino groups or via terminally introduced cysteine residues. The results showed that the binding efficacy and binding stability of the peptides varied greatly. The CAP18(106-137) peptide, which exhibited the highest binding efficacy and binding stability, was also immobilized on a poly(ethylene imine)-poly(ethylene glycol) (PEI-PEG) surface through maleimide-terminal PEG. The binding efficacy of the CAP18(106-137) peptide was not significantly affected by the different immobilization methods used in the attachment to a dextran or a PEI-PEG surface. LPS bound selectively to CAP18(106-137) and showed very low unspecific binding to the PEI-PEG surface layer. The EI peptide proved to have a reasonably good binding capacity but a less stable interaction with LPS. The other peptides exhibited much poorer binding efficacy. We believe that the results presented in this work can be of practical value for the development of extracorporeal treatment of patients suffering from septic shock.

Acute-Phase Proteins↗

Characterization of fractionated asphaltenes by UV-vis and NMR self-diffusion spectroscopy.

Asphaltenes have been fractionated by liquid/liquid extraction, yielding four subfractions. The characteristics of fractionated asphaltenes were studied with respect to solubility, aromaticity, heteroatom content, and diffusion behavior. It was observed that asphaltenes from the four subfractions showed variations in their tendency to flocculate and also distinct differences in aromaticity. Furthermore, NMR self-diffusion studies showed that the average diffusion coefficients varied for asphaltenes from the different subfractions. The results suggest a variation in average size and stability between asphaltenes, depending on what subfraction they belong to. The subfraction that consisted of asphaltenes with the largest average size and the highest aromaticity was also found to contain the asphaltenes that had the strongest tendency to flocculate.

Journal Article↗

NMR diffusion studies of translational properties of oil inside core-shell latex particles.

The diffusion behavior of core-shell latex particles with a liquid core of hexadecane and a solid polystyrene shell in water solution has been studied using the pulsed field gradient spin-echo (PFG-SE) NMR technique. The apparent diffusion coefficient and the root mean square displacement of oil were strongly dependent on the diffusion time Delta. With increasing diffusion time, the obstructing effect from the particle wall caused a decrease in the apparent oil diffusion coefficient. The root mean square displacement of oil inside the particle core was constant for all diffusion times and was used for the calculation of the particle radius. The volume fraction dependence of the apparent diffusion coefficient was found to be roughly consistent with the hard-sphere model. The diffraction pattern in the echo decay predicted from the q-space formalism for molecules diffusing inside a spherical cavity was almost completely smeared out due to polydispersity and wall relaxation effects. It was observed that 10-20% (w/w) of the particle shell consisted of hexadecane. This fact imparted a slow component to the echo decay, since the exchange time between oil in the shell and oil in the cavity was slow, which further contributed to the smearing out of the diffraction pattern. It was concluded that by using the core-shell concept very good signal-to-noise is obtained in the PFG-SE experiment, thus making possible studies of translational properties of colloidal particles in different environments to an extent that previously has been very difficult to perform.

Journal Article↗

Predictions of pulsed field gradient NMR echo-decays for molecules diffusing in various restrictive geometries. Simulations of diffusion propagators based on a finite element method.

Pulsed field gradient NMR diffusometry is a promising tool for investigating structures of porous material through determinations of dynamic displacements of molecules in porous systems. A problem with this approach is the lack of closed analytical expressions for echo-decays in anything but idealized pore geometries. We present here an approach based on calculating the appropriate diffusion propagator by means of finite element calculations. The suggested method is quite general, and can be applied to arbitrary porous systems. The protocol for the calculations is outlined and we show results from some different cases: diffusion in confined geometries and in systems that are spatially inhomogeneous with respect to concentration.

Diffusion↗