PubMed Health⌕ Search

Biomedical subjects

Manuel Fuentes

Publications and source records attributed to Manuel Fuentes.

At least 19 recordsLinked to original sources
PubMed2025

Tonic signaling of the B-cell antigen-specific receptor is a common functional hallmark in chronic lymphocytic leukemia cell phosphoproteomes at early disease stages.

B-cell chronic lymphocytic leukemia (B-CLL) is characterized by highly heterogeneous genomic alterations and altered signaling pathways, with limited studies on its proteome. Our study presents a comprehensive analysis of the proteome and phosphoproteome in B-CLL and CLL-like monoclonal B-cell lymphocytosis (MBL) primary cells. Using high-resolution mass spectrometry, we identified 2970 proteins and 316 phosphoproteins across five tumor samples, including 55 newly identified phosphopeptides (ProteomeXchange-PXD005997). Our multifaceted approach also integrated protein microarrays and western blotting for further data validation in a new patient cohort of 14 patients. Despite sharing 73% of their proteomes, the phosphoproteomes varied significantly among samples, independent of cytogenetic alterations and immunoglobulin heavy variable cluster (IGHV) mutational status. We identified common functional hallmarks in B-CLL and MBL phosphoproteomes, notably tonic signaling (low-level, constitutive signaling) of the B-cell antigen-specific receptor (BCR) and nuclear factor NF-kappa-B (NF-kβ)/signal transducer and activator of transcription 3 (STAT3) pathways. Nine phosphoproteins involved in BCR signaling were further validated, showing a high correlation with early disease stages. Our study advances the field by providing a detailed perspective on the proteome and phosphoproteome of B-CLL cells, revealing signaling pathways crucial for disease development and progression. Integrating diverse proteomics techniques and identifying novel phosphopeptides offers new insights into CLL biology, potentially informing future therapeutic strategies and biomarker development for early diagnosis and personalized treatment.

Humans↗
PubMed2006

Solid phase proteomics: dramatic reinforcement of very weak protein-protein interactions.

Very weak protein-protein interactions may play a critical role in cell physiology but they are not easily detectable in "in vitro" experiments. To detect these weak interactions, we have developed a strategy that included: (a) design of a rapid and very effective crosslinking of protein-protein complexes with poly-functional reagents; (b) selective adsorption of very large proteins on lowly activated ionic exchangers, based on the need of a multipoint physical adsorption to incorporate the proteins into the matrix; (c) purification by selective adsorption of protein-protein complexes formed by strong protein-protein interactions, via selective adsorption of the complexes on lowly activated ionic exchangers via multi-protein physical adsorption and leaving the non-associated proteins in the solution; (d) reinforcement of very weak protein-protein interactions by selective adsorption of the complex on lowly activated ionic exchange supports via a synergetic cooperation of the weak protein-protein interaction plus the interactions of both proteins with the support enabling the almost full shifting of the equilibrium towards the association position; (e) control of the aggregation state of proteins like BSA, formed by weak protein-protein interactions. In this last case, it seems that the interaction of the protein molecules placed on the borders of the aggregate with the groups on the support partially stabilizes the whole aggregate, although, some molecules of the aggregate cannot interact with the support. The size of the aggregates may be defined by controlling the concentration of ionised groups on the support: the less activated the supports are, the bigger the complexes. In this way, solid-phase proteomics could be a very interesting tool to detect weak protein-protein interactions.

Adsorption↗
PubMed2006

Detection of polyclonal antibody against any area of the protein-antigen using immobilized protein-antigens: the critical role of the immobilization protocol.

Antigens immobilized on solid supports may be used to detect or purify their corresponding antibodies (Ab) from serum. Direct immobilization of antigens on support surfaces (through short spacer arms) may promote interesting stabilizing effects on the immobilized antigen. However, the proximity of the support may prevent the interaction of some fractions of polyclonal Ab with some regions of the antigen (those placed in close contact with the support surface). Horseradish peroxidase (HRP) was immobilized on agarose by different protocols of multipoint covalent immobilization involving different regions of the antigen surface. Glyoxyl-agarose, BrCN-agarose, and glutaraldehyde-agarose were used as activated supports. Each HRP-immobilized preparation was much more stable than the soluble enzyme, but it was only able to adsorb up to 60-70% of a mixture of polyclonal anti-HRP antibodies. On the other hand, HRP was also immobilized on agarose through a very long, flexible, and hydrophilic spacer arm (dextran). This immobilized HRP was hardly stabilized, but it was able to adsorb 100% of the polyclonal anti-HRP. The absence of steric hindrances seems to play a critical role favoring the complete recognition of all classes of polyclonal Ab. Another solution to achieve a complete adsorption of polyclonal Ab on immobilized-stabilized antigens has been also reached by using a mixture of the differently immobilized and stabilized HRP-agarose preparations. In this case, an improved storage and operational stabilities of the immobilized antigens can be combined with the complete adsorption of any class of antibody.

Adsorption↗
PubMed2006

Adsorption behavior of bovine serum albumin on lowly activated anionic exchangers suggests a new strategy for solid-phase proteomics.

Diluted solutions of bovine serum albumin (BSA) (e.g., 0.1 mg /mL) do not form detectable protein large aggregates. Using gel-filtration experiments, we determined that a diluted solution of BSA is 97% monomeric BSA and 3% dimeric. The adsorption of this diluted BSA on highly activated anionic exchangers (e,g., having 40 micromol/wet g) keeps this mainly monomeric form. When supports activated with 2 micromol/wet g are used, only dimers become adsorbed to the support, accounting for 100% of the offered BSA. When the diluted BSA solution is offered to very mildly activated anionic exchangers (even only 0.125 micromol/wet g), an unexpected adsorption of most of the BSA on the support was also observed. These very slightly activated supports are only able to adsorb very large proteins or very large protein-protein complexes, larger than BSA dimers. In fact, a rapid cross-linking of the adsorbed BSA with dextran-aldehyde reveals the formation of very large BSA-BSA complexes with molecular mass higher than 500 000 Da, complexes that may be observed for soluble BSA with very high concentrations but are not detectable at 0.1 mg/mL. Moreover, the size of the aggregates strongly depends on the concentration of the ionized groups on the support: the less activated the supports are, the higher the sizes of the complexes. It seems that the interaction of the BSA molecules on the margins of the BSA aggregate with the groups on the support may stabilize the whole protein aggregate, although some components are not interacting with the support. Aggregates could account for more than 40% of the BSA in the solution after 50 h of incubation. However, only these large BSA aggregates were adsorbed in the support.

Adsorption↗
PubMed2005

Optimization of the modification of carrier proteins with aminated haptens.

In this report we show that succinic groups are far more reactive to amino compounds than the carboxylic groups derived from Asp and Glu on the protein when using coupling via 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDCI) (even by an 8 fold factor). Accordingly, a new carrier-protein was designed where both natural amino and carboxylic moieties were transformed into succinic residues. To prepare this hypersuccinylated carrier, all exposed carboxylic acids were first transformed into amino groups by reaction with ethylendiamine after activation with EDCI. Secondly, all these residues together with the ones from Lys were succinylated to prepare a fully succinylated protein. This was even more relevant considering that the amount of Lysine was 2-4 fold lower than Asp and Glu in most of the proteins. These "hyper-succinylated" proteins (KLH or BSA) offer significant improvements in protein reactivity compared to the native proteins (by a factor of 8-10). The optimization of the reaction, in which the presence of dioxane was found to be influential, permitted further improvements in the modification of the protein. Finally, this new strategy was successfully used to develop antibodies against the commercial anti-tumor molecule, ET-637-NH2. Using native KLH no response was found, whereas 1/64,000 serum dilutions gave very high values in ELISA procedures when immunization was performed using the hyper-succinylated KLH.

Adjuvants, Immunologic↗
PubMed2005

Detecting minimal traces of DNA using DNA covalently attached to superparamagnetic nanoparticles and direct PCR-ELISA.

A single bond covalent immobilization of aminated DNA probes on magnetic particles suitable for selective molecular hybridization of traces of DNA samples has been developed. Commercial superparamagnetic nanoparticles containing amino groups were activated by coating with a hetero-functional polymer (aldehyde-aspartic-dextran). This new immobilization procedure provides many practical advantages: (a) DNA probes are immobilized far from the support surface preventing steric hindrances; (b) the surface of the nanoparticles cannot adsorb DNA ionically; (c) DNA probes are bound via a very strong covalent bond (a secondary amine) providing very stable immobilized probes (at 100 degrees C, or in 70% formamide, or 0.1N NaOH). Due to the extreme sensitivity of this purification procedure based on DNA hybridization, the detection of hybridized products could be coupled to a PCR-ELISA direct amplification of the DNA bond to the magnetic nanoparticles. As a model system, an aminated DNA probe specific for detecting Hepatitis C Virus cDNA was immobilized according to the optimised procedure described herein. Superparamagnetic nanoparticles containing the immobilized HCV probe were able to give a positive result after PCR-ELISA detection when hybridized with 1 mL of solution containing 10(-18) g/mL of HCV cDNA (two molecules of HCV cDNA). In addition, the detection of HCV cDNA was not impaired by the addition to the sample solution of 2.5 million-fold excess of non-complementary DNA. The experimental data supports the use of magnetic nanoparticles containing DNA probes immobilized by the procedure here described as a convenient and extremely sensitive procedure for purification/detection DNA/RNA from biological samples. The concentration/purification potential of the magnetic nanoparticles, its stability under a wide range of conditions, coupled to the possibility of using the particles directly in amplification by PCR greatly reinforces this methodology as a molecular diagnostic tool.

Binding Sites↗
PubMed2005

Stabilization of enzymes by multipoint attachment via reversible immobilization on phenylboronic activated supports.

In this work, we have used supports activated with m-amino-phenylboronic groups to "reversibly" immobilize proteins under very mild conditions. Most of the proteins contained in a crude extract from E. coli could be immobilized on Eupergit C-250 L activated with phenylboronic and then fully desorbed from the support by using mannitol or SDS. This suggested that the immobilization of the proteins on these supports was not only via sugars interaction, but also by other interaction/s, quite unspecific, that might be playing a key role in the immobilization of the proteins. Penicillin acylase from E. coli (PGA) was also immobilized in Eupergit C activated with m-amino-phenylboronic groups. The enzyme could be fully desorbed with mannitol immediately after being immobilized on the support. However, longer incubation times of the immobilized preparation caused a reduction of protein elution from the boronate support in presence of mannitol. Moreover, these immobilized preparations showed a higher stability in the presence of organic solvents than the soluble enzyme; the stability also improved when the incubation time was increased (to a factor of 100). By desorbing the weakest bound enzyme molecules, it was possible to correlate adsorption strength with stabilization; therefore, it seems that this effect was due to the rigidification of the enzyme via multipoint attachment on the support.

Bacterial Proteins↗
PubMed2005

Preparation of inert magnetic nano-particles for the directed immobilization of antibodies.

Various activated supports (cyanogen bromide, glutaraldehyde, epoxy-chelates, primary amino) were evaluated for the immobilization of IgG anti-horseradish peroxidase. Cyanogen bromide and glutaraldehyde supports greatly reduced the recognition capacity of the antigen, probably due to the incorrect orientation of the antibody on the support. Hetero-functional epoxy-chelate and immobilization by the sugar chain on primary amino groups had little effect on high recognition of the antigen (near to the theoretically expected value). However, the immobilization by the sugar chain resulted in a higher adsorption rate of horseradish peroxidase, possibly due to a favourable orientation on a flexible spacer arm). Antibodies immobilized on aminated surfaces showed two major drawbacks. Firstly, the biological activity of the immobilized antibody sharply decreased over several days when stored at low ionic strength, although this effect could be partially reversed by incubation at high ionic strength. Secondly, a high level of non-specific proteins adsorption on the support surface was observed. Both problems could be successfully resolved by controlling the coating of the support with aldehyde-aspartic-dextran. We propose that the loss of biological activity was related to the ionic adsorption of the immobilized antibody on the support surface, leading to a blocking of the recognition areas. This optimized protocol was applied to the immobilization of IgG anti-horseradish peroxidase from rabbit on magnetic nano-particles. A 10 microg preparation of nano-particles was able to capture more than 75% of the 0.1 microgram of recombinant horseradish peroxidase present in 10 L of crude protein extract (1g/L) from Escherichia coli.

Antibodies↗
PubMed2005

Purification, stabilization, and concentration of very weak protein-protein complexes: Shifting the association equilibrium via complex selective adsorption on lowly activated supports.

Very weak protein-protein interactions are very difficult to detect because these complexes could be under the detection limit or they tend to dissociate. Here, using as a model the antibody-antigen interaction weaken by the presence of dioxane, we have shown a strategy for the protein complexes purification by selective adsorption of the associated proteins. This strategy is based on the use of poorly activated anionic exchanger supports to selectively adsorb large complexes. This selective adsorption of the associated proteins shifted the association equilibrium of the soluble proteins toward the associated form. Thus, in the presence of 15% v/v dioxane, a concentration that is able to almost fully break the immunocomplex (less that 3% of the immunocomplex appeared associated when soluble antigen-antibody mixture was cross-linked with aldehyde-dextran), we can obtain more than 90% of the fully pure immunocomplex from the non-associated protein, adsorbed on anionic exchanger supports having a very low activation. This simple strategy may be a very useful tool to solve one of the most relevant challenges in the modern proteomics, the detection of very weak protein-protein interactions.

Adsorption↗
PubMed2004

Detection and purification of two antibody-antigen complexes via selective adsorption on lowly activated anion exchangers.

Taken advantage of the mechanism of adsorption of macro-molecules on ionic exchangers, (a multipoint interaction between the protein and the support), it is possible to selectively adsorb large proteins leaving small ones in the supernatant. Associated proteins should present a significant difference in its size as compared to the non-associated forms. Thus, the protein complexes may have much larger surfaces to interact with the support. Here, by selecting the support with the highest activation degree that was unable to adsorb the non-associated proteins, we have shown the simple and selective adsorption of immuno complexes (as a model), while antibodies and antigens remained in the supernatant. Therefore, it was possible to selectively adsorb on lowly activated supports (e.g., agarose 4BCL having only 1 micromol of amino groups per g of support) rabbit IgG/anti-rabbit immunoglobulins (immuno complex), while these supports were unable to adsorb the individual immunoglobulines. Similarly, horseradish peroxidase (HRP)/anti-HRP were selectively adsorbed on lowly activated supports, while the individual proteins were not adsorbed at all. Afterwards, the adsorbed associated proteins (purified at least from the non-associated counterparts and concentrated by the adsorption on the support) may be cross-linked with aldehyde-dextran and be desorbed from the matrix for their analysis. This strategy may permit very simple experiments to detect the presence of protein-protein complexes. Finally, we have shown the advantages of this technique compared to the use of one of the proteins previous immobilized on a support.

Adsorption↗
PubMed2004

Improved stabilization of chemically aminated enzymes via multipoint covalent attachment on glyoxyl supports.

The surface carboxylic groups of penicillin G acylase and glutaryl acylase were chemically aminated in a controlled way by reaction with ethylenediamine via the 1-ethyl-3-(dimethylamino-propyl) carbodiimide coupling method. Then, both proteins were immobilized on glyoxyl agarose. In both cases, the immobilization of the chemically modified enzymes improved the enzyme stability compared to the stability of the immobilized but non-modified enzyme (by a four-fold factor in the case of PGA and a 20-fold factor in the case of GA). The chemical modification presented a deleterious effect on soluble enzyme stability. Therefore, the improved stability should be related to a higher multipoint covalent attachment, involving both the lysine amino groups and also the new amino groups chemically introduced on the enzyme. Moreover, the lower pK(a) of the new amino groups permitted to immobilize the enzyme under milder conditions. In fact, the aminated proteins could be immobilized even at pH 9, while the non-modified enzymes could only be immobilized at pH over 10.

Amines↗
PubMed2004

Selective and mild adsorption of large proteins on lowly activated immobilized metal ion affinity chromatography matrices. Purification of multimeric thermophilic enzymes overexpressed in Escherichia coli.

A strategy to selectively adsorb large proteins on immobilized metal ion affinity chromatography supports is presented. It is based on the fact that large proteins have a large surface that permits the long distance interaction with groups placed quite far apart (very dispersed onto the support surface) in the support, therefore, even using lowly activated supports, these proteins may be able to yield multiple interactions with the support, which is not possible for smaller proteins. This has been shown using a crude extract from Escherichia coli, where only large proteins were adsorbed on supports having 0.25 micromol of metallic groups/g of support. Then, these lowly activated supports have been used for purifying multimeric enzymes from thermophilic organisms (alpha- and beta-galactosidases from Thermus sp. strain T2) cloned and over-expressed in mesophilic ones. A previous heating step of the crude extract destroyed the quaternary structure of all multimeric enzymes from the host (E. coli). Thus, the only large protein remaining in the supernatant of this heated extract are the cloned multimeric thermophilic enzymes, permitting their very simple purification by using only one chromatographic step.

Adsorption↗
PubMed2004

Use of immobilized lipases for lipase purification via specific lipase-lipase interactions.

Lipase from Pseudomonas fluorescens (PFL), an enzyme with a great tendency to yield bimolecular aggregates, was immobilized via multipoint covalent attachment on glyoxyl-agarose in the presence of Triton X-100. This strategy permitted to obtain the enzyme with the active center oriented towards the reaction medium. This immobilized enzyme presents the capacity of specifically adsorbing PFL molecules, that can be easily desorbed by the use of detergents. More interesting, the enzyme was also able to adsorb other lipases. That is, the lipase from Bacillus thermocatenulatus (BTL2) cloned in Escherichia coli was selectively adsorbed on this immobilized enzyme, enabling a very simple purification strategy. Similar results were achieved with some other lipases (those from Rhizomucor miehei (RML), Rhizopus oryzae (ROL), and Humicola Lanuginosa (HLL)). In all cases, the enzyme could be easily desorbed by incubation with Triton X-100. The matrix could be used several cycles without any detrimental effect on the adsorption capacity.

Electrophoresis, Polyacrylamide Gel↗
PubMed2004

Prevention of interfacial inactivation of enzymes by coating the enzyme surface with dextran-aldehyde.

Interactions between soluble enzymes and interfaces of organic solvent drops or gas bubbles have a very negative effect on the operational stability of the soluble enzymes. In this study, the formation of a hydrophilic shell around the enzyme has been attempted using dextran-aldehyde which would prevent the interaction between enzyme and hydrophobic interfaces with minimal modification of the enzyme surface. After optimizing the size of the dextran (that was found to play a critical role), three different enzymes (glucose oxidase, d-amino acid oxidase, and trypsin) have been conjugated with dextran-aldehyde and their stability towards organic-aqueous and air-liquid interfaces has been evaluated. The treatment itself proved to be very low-cost in terms of activity and was highly stabilizing for the three enzymes assayed. The conjugated preparation of the three assayed enzymes remained fully active in the presence of air-liquid interfaces for at least 10h. However, the unmodified enzymes lost more than 50% of activity within the first hour of the experiments except for trypsin which kept 38% activity after 12h while the trypsin dextran-aldehyde conjugate maintained 100% enzyme activity. Similar results were achieved in the presence of stirred organic solvent-aqueous buffer biphasic system, although in this case some activity was lost by the action of the soluble portion of the organic solvent. In fact, this treatment seems to be also effective to improve the resistance to the action of organic solvent.

Aldehydes↗
PubMed2004

Ion exchange using poorly activated supports, an easy way for purification of large proteins.

Ion-exchange chromatography using commercial ionic supports is a commonly used technique for protein purification. However, selective adsorption of a target protein from a given extract onto commercial ion exchangers seems to be quite complex since they are designed to adsorb the maximum percentage of proteins with the opposite charge. In this paper, ion-exchanger supports with different activation degrees (from 1 to 40 micromol of amino groups per g of agarose) have been prepared and used for the purification of large proteins. These kinds of proteins have large surfaces to interact by many points with the support. Therefore, it was possible to purify large proteins as beta-galactosidase from Thermus sp. strain T2 from a crude extract from Escherichia coli or bovine liver catalase from a commercial preparation, with tailor-made ion-exchanger supports. A simple step of adsorption/desorption on lowly activated supports rendered both enzymes rather pure as confirmed by sodium dodecyl sulphate-polyacrylamide gel electrophoresis. Moreover, this strategy makes also easy the desorption step that requires rather low NaCl concentrations, which may become a serious problem for desorption of large proteins when using conventional supports, due to their ability of generating a very strong adsorption.

Chromatography, Gel↗
PubMed2004

Determination of protein-protein interactions through aldehyde-dextran intermolecular cross-linking.

A very simple strategy, based on the intermolecular cross-linking of associated proteins by using aldehyde-dextrans, has been proposed to detect protein-protein interactions. Aldehyde-dextran was able to cross-link different enzymes composed of several polypeptide chains (e.g., trypsin and penicillin G acylase), proteolyzated proteins (e.g., extracts from porcine pancreas) and finally, an immunocomplex (horseradish peroxidase/anti-horseradish peroxidase). This cross-linked immunocomplex could be selectively adsorbed on immobilized anti-rabbit IgG. The presence of unspecific covalent attachment between unrelated protein molecules was not detected. Thus, this strategy permits the cross-linking of different protein components and avoids the formation of nonspecific protein-protein associations.

Aldehydes↗
PubMed2003

Self-assembly of Pseudomonas fluorescens lipase into bimolecular aggregates dramatically affects functional properties.

It has been found that lipase from Pseudomonas fluorescens (PFL) is able to aggregate into bimolecular structures (MW around 66 kD) even at moderate enzyme concentrations. At very low enzyme concentrations and in the presence of detergents, the same enzyme displayed a unimolecular structure with a molecular weight of 33 kD. Both enzyme structures displayed different functional properties. First, the bimolecular structure was much more stable than the unimolecular species (the bimolecular structure maintained over 80% of initial activity after 72 hours at 45 degrees C, while the unimolecular structure retained only around 30% of initial activity after 4 hours of incubation under the same experimental conditions); and the bimolecular form presented a higher optimal T. Second, the unimolecular form showed a much lower K(M) for ethyl butyrate than the bimolecular form. Third, the interfacial activation in biphasic substrate-aqueous milieu was higher for the bimolecular form. Fourth, the unimolecular structure was less active but much more enantioselective than the unimolecular species in the model reaction used. It is proposed that the bimolecular aggregates of PFL might be formed by two open lipase molecules (mutual interfacial activation), in intimate contact, and that the bimolecular form represents an example of "pseudo-quaternary" structure.

Enzyme Activation↗