PubMed Health⌕ Search

Biomedical subjects

Manuel Mota

Publications and source records attributed to Manuel Mota.

8 recordsLinked to original sources

Effect of copper in the protistan community of activated sludge.

Protists have proved to be an interesting tool for assessing the occurrence of pollution in wastewater treatment systems along with its role in the control of pollution itself through grazing of dispersed bacteria and maintenance of a healthy trophic web in those artificial ecosystems. Two sets of assays were carried on in a bench scale pilot plant in order to study the response of the activated sludge community of protists to the exposure of copper: the first set was carried on with synthetic sewage and the second one with real sewage. The results emphasize the ability of activated sludge biological communities to survive and to react to toxicants and highlight the role of protistan communities as indicators of toxicants entrance in treatment systems.

Animals↗

Purification, structure and immunobiological activity of an arabinan-rich pectic polysaccharide from the cell walls of Prunus dulcis seeds.

The structure and bioactivity of a polysaccharide extracted and purified from a 4M KOH + H3BO3 solution from Prunus dulcis seed cell wall material was studied. Anion-exchange chromatography of the crude extract yielded two sugar-rich fractions: one neutral (A), the other acidic (E). These fractions contain a very similar monosaccharide composition: 5:2:1 for arabinose, uronic acids and xylose, respectively, rhamnose and galactose being present in smaller amounts. As estimated by size-exclusion chromatography, the acidic fraction had an apparent molecular mass of 762 kDa. Methylation analysis (from the crude and fractions A and E), suggests that the polysaccharide is an arabinan-rich pectin. In all cases, the polysaccharides bear the same type of structural Ara moieties with highly branched arabinan-rich pectic polysaccharides. The average relative proportions of the arabinosyl linkages is 3:2:1:1 for T-Araf:(1-->5)-Araf:(1-->3,5)-Araf:(1-->2,3,5)-Araf. The crude polysaccharide extract and fractions A and E induced a murine lymphocyte stimulatory effect, as evaluated by the in vitro and in vivo expression of lymphocyte activation markers and spleen mononuclear cells culture proliferation. The lymphocyte stimulatory effect was stronger on B- than on T-cells. No evidence of cytotoxic effects induced by the polysaccharide fractions was found.

Animals↗

Anatomy and cell wall polysaccharides of almond (Prunus dulcis D. A. Webb) seeds.

The anatomy of Prunus dulcis was analyzed by applying several differential staining techniques and light microscopy. Prunus dulcis seed has a thin and structurally complex seed coat, with lignified cellulosic tissue. The embryo has two voluminous cotyledons. Cotyledon cells have a high number of protein and lipid bodies, some of which have phytin. The provascular tissue, located in the cotyledons, is oriented in small bundles perpendicular to the transverse embryonic axis. Prunus dulcis cell wall material is very rich in arabinose (45 mol %). Glucose (23%), uronic acids (12%), and xylose (12%) are also major sugar components. The polymers obtained from the imidazole and Na(2)CO(3) extracts contain mainly pectic substances rich in arabinose, but the sugar content of these extracts was very low. The majority of the pectic substances (also rich in arabinose) was recovered with the KOH extracts. These extracts, with high sugar content, yielded also xyloglucans and acidic xylans. The 4 M KOH + H(3)BO(3) extracts yielded polysaccharides rich in uronic acids and xylose and very rich in arabinose, accounting for 27% of the cell wall material.

Cell Wall↗

Enzymatic degradation of starch-based thermoplastic compounds used in protheses: identification of the degradation products in solution.

Apart from favourable physico-chemical and mechanical properties, the most important requirement for a biodegradable polymer to be used in medical applications is its biocompatibility and the non-cytotoxicity of its degradation products. Their combined effect should assure the safe material degradation under controlled kinetics. The present work analyses the degradation behaviour of blends of corn starch with poly(ethylene-vinyl alcohol) copolymer (SEVA-C). The characterization included long-term degradation trials on simulated physiological solution with alpha-amylase up to 200 days. The degradation solutions were analysed by several techniques. High-performance liquid chromatography (HPLC) and colorimetric methods were used to monitor the liberation of carbohydrate as a consequence of starch hydrolysis by alpha-amylase. The hydration degree was followed by thermogravimetric analysis (TGA). Several degradation products such as carbohydrates ranging from C6 to C18 were identified. After alpha-amylase action, biodegradation was more pronounced in the first 100 days, after which the biodegradation rate decreased probably due to the structure and porosity of the material. The action of alpha-amylase solely led to the starch degradation, in contrast with other assays without enzymes where no carbohydrates were found in the degradation solutions.

Carbohydrate Metabolism↗

Effect of different toxic compounds on ATP content and acid phosphatase activity in axenic cultures of Tetrahymena pyriformis.

The sensitivity of protozoa, and particularly ciliated protozoa, to environmental changes suggested a study on the physiological responses arising from exposure to toxic compounds. Tetrahymena pyriformis was used as a test organism in a set of miniaturized assays. The physiological response of this ciliate was assessed in terms of adenosine-5'-triphosphate content and acid phosphatase activity after exposure of the cultures of T. pyriformis to four toxicants: copper, zinc, Triton X-100, and cycloheximide. In the range of concentrations used, stimulation and inhibition of these two parameters were observed. The correlation between the two parameters is analyzed.

Acid Phosphatase↗

Changes in diffusion through the brain extracellular space.

ECS (extracellular space) works as the microenvironment of brain cells. Diffusion through ECS may be described through an effective diffusion coefficient, D (e), which in turn depends on ECS porosity, epsilon, and tortuosity, T. In the present research, diffusion data together with epsilon and T were collected from the specialized literature and analysed to seek a correlation of T versus epsilon. On the basis of D (e) data, upper and lower T boundaries were defined and related to topologically 'dense' and 'loose' cell arrangement. A possible range for T variation was obtained for ECS, with epsilon ranging from 0.05 to 0.6. A tortuosity index ( n ) in the form of T and epsilon logarithmic ratio was introduced. This index may be adopted for recalculation of T or epsilon if only one of these parameters is known. As a result of data analysis and modelling, it was concluded that, upon different external conditions, for instance oxygen depletion, the ECS porosity decreases and cells (presumably through membrane rearrangements) adjust the void space to keep the diffusion within a defined range, which gives the living tissue the ability to maintain the diffusion level up to two or more times higher than in conventional granular bed packing. Thus, even with a dramatic ECS decrease, the cellular system is still able to support a given diffusion by decreasing the value of T. The obtained results clearly show the existence of three data clusters: a region of normal brain functioning, both for young and adult brains, for values of epsilon comprised between 0.15 and 0.30, and two regions of abnormal brain behaviour to the left and to the right of the normal region, corresponding to different states (aging, tumours, anoxia, brain death, etc.). The present approach allows defining the optimal range of epsilon and T to assure the best ECS diffusion efficiency for a specified macromolecule. This might be important in brain clinical treatment.

Animals↗

Changes in morphology of starch-based prothestic thermoplastic material during enzymatic degradation.

This work evaluates the structural changes of an interpenetrated starch thermoplastic blend withstanding different enzymatic alpha-amylase degradation periods (up to 200 days), and establishes the relationships between the kinetics degradation rate and the structure of the material. It characterises the different stages of the enzymatic degradation process on starch/ethylenevinyl-alcohol blends, based on the attack of the connected starch domains that can be accessed by the enzymatic solution. The completely encapsulated starch particles remain practically unchanged. Furthermore, it was also found that the enzymatic degradation process was limited after 100 days of immersion. In order to understand such phenomenon several techniques were used, namely differential scanning calorimetry, contact-angle measurements, high-performance liquid chromatography, Fourier transform infrared spectrometry, scanning electron microscopy and atomic force microscopy. The materials were evaluated with respect to the enzymatic degradation rate, surface morphology and degradation behaviour. The results show that the ethylene-vinylalcohol phase wraps the starch domains, preventing the respective degradation. Consequently, the degraded material in the solution comes only from the starch particles that could be reached by the enzyme.

Alcohols↗

Immobilized particles in gel matrix-type porous media. Nonhomogeneous cell distribution.

The conventional random pore model assumes a homogeneous cell distribution in the gel matrix used to immobilize cells. However, the validity of this model is restricted to values of the exponent alpha, between 1.8 and 2.25, of a model power function relating the diffusivity coefficient in the matrix with the overall cell volume fraction in the system. Based on the analysis of published data for diffusion in gels with immobilized cells and on the homogeneous approach for the random pore model developed in a previous work, a new, nonhomogeneous approach is proposed for alpha values outside the range 1.8-2.25. To explain these data, two main types of nonhomogeneous cell distribution were considered: (1) nonhomogeneous cell distribution in the gel for alpha > 2.25 (type 1) and (2) nonhomogeneity related with anisotropy of cell space orientation when alpha < 1.8 (type 2). In the case of nonhomogeneity of type 1, the cell volume fraction in the layers occupied by cells must be considered in place of the concept previously used for homogeneous distribution, viz., the average cell volume fraction. This model underlines that accumulation of cells in a thin layer close to the surface improves their nutrient intake. For nonhomogeneity of type 2, the tortuosity of such a system is smaller than should be expected if spherical cells were considered, thereby changing the effective diffusion. The model proposed in this work proved to fit into several real cases reported in the literature.

Anisotropy↗