Biomedical subjects

Marco Beyer

Publications and source records attributed to Marco Beyer.

5 recordsLinked to original sources

PubMed2006

Mould germination: data treatment and modelling.

The objectives of this study were i/ to examine germination data sets over a range of environmental conditions (water activity, temperature) for eight food spoilage moulds, ii/ to compare the ability of the Gompertz equation and logistic function to fit the experimental plots, iii/ to simulate germination by assessing various distributions of the latent period for germination amongst a population of spores. Data sets (percentage germination, P (%), versus time, t) of Aspergillus carbonarius, Aspergillus ochraceus, Fusarium verticillioides, Fusarium proliferatum, Gibberella zeae, Mucor racemosus, Penicillium chrysogenum and Penicillium verrucosum were analysed. No correlation, or relationship between the mean percentage [mean (P)] and the variance [var (P)] was found. Therefore no transformation of the germination data was required. Experimental data were fitted by using the Gompertz equation P = A exp (-exp [mu(m) e/A (delta - t) + 1]) and the logistic function P = Pmax/(1 + exp (k (tau - t))). Based on the residual mean square error (RMSE), no model performed better than the other one. However, model parameters were generally determined more precisely with the logistic model than with the Gompertz one. The time course of fungal spore germination curves was simulated assuming different distributions of the latent period for germination, lag, amongst a population of spores. The growth rate of germ tubes was calculated by means of the relationship: lag x rate = k. For normal Gaussian distributions, germination curves were symmetrical with respect to the inflection point and should be modelled with the logistic function. Skewed distributions were capable of simulating an asymmetric germination curve that was fitted by the Gompertz model. Future studies should be conducted for assessing whether the distributions assumed in this paper are in accordance with the experimental distributions that are still unknown.

Colony Count, Microbial↗

PubMed2005

Effect of relative humidity on germination of ascospores and macroconidia of Gibberella zeae and deoxynivalenol production.

Cereals are frequently infested by mycotoxin-producing fungi such as Gibberella zeae. G. zeae produces sexual spores (ascospores, dispersed by wind) and asexual spores (macroconidia, dispersed by rain droplets) to infect host plants. The production of the mycotoxin deoxynivalenol (DON) and the germination of ascospores and macroconidia of G. zeae were studied at 20 degrees C in relation to relative humidity (RH). The DON contents of wheat heads and autoclaved rice grain samples, artificially inoculated with ascospore or macroconidia suspensions of equal spore density, were determined at 35 days after inoculation by high-performance liquid chromatography (HPLC). The average DON production 35 days after inoculation was much lower on rice (3.95+/-1.34 mg kg(-1)) than on wheat heads (302.30+/-57.46 mg kg(-1)). Macroconidia inoculi produced more DON than ascospore inoculi at relative humidities >90%, but less DON between 53% and 80% RH. At RH < or = 53%, no significant differences in DON production were observed between macroconidia and ascospore inoculi. DON production increased with RH irrespective of spore type. Germination of ascospores and macroconidia was monitored during incubation above six constant humidity solutions ranging from 30% to 93% RH. Ascospores only required a RH > or = 53%, whereas macroconidia required RH of > or = 80% for germination. The different humidity requirements of the two spore types for germination are discussed as a potential reason for the differential DON production of ascospore and macroconidia inoculi in relation to humidity. The results indicate that DON contamination levels partly dependent upon the interaction of spore type and RH and may confer an ecological advantage to G. zeae over other Fusarium head blight pathogens.

Chromatography, High Pressure Liquid↗

PubMed2004

Studies on water transport through the sweet cherry fruit surface: IX. Comparing permeability in water uptake and transpiration.

Water uptake and transpiration were studied through the surface of intact sweet cherry (Prunus avium L.) fruit, exocarp segments (ES) and cuticular membranes (CM) excised from the cheek of sweet cherry fruit and astomatous CM isolated from Schefflera arboricola (Hayata) Hayata, Citrus aurantium L., and Stephanotis floribunda Brongn. leaves or from Lycopersicon esculentum Mill. and Capsicum annuum L. var. annuum Fasciculatum Group fruit. ES and CM were mounted in diffusion cells. Water (deionized) uptake into intact sweet cherry fruit, through ES or CM interfacing water as a donor and a polyethyleneglycol (PEG 6000, osmotic pressure 2.83 MPa)-containing receiver was determined gravimetrically. Transpiration was quantified by monitoring weight loss of a PEG 6000-containing donor (2.83 MPa) against dry silica as a receiver. The permeability coefficients for osmotic water uptake and transpiration were calculated from the amount of water taken up or transpired per unit surface area and time, and the driving force for transport. Permeability during osmotic water uptake was markedly higher than during transpiration in intact sweet cherry fruit (40.2-fold), excised ES of sweet cherry fruit (12.5- to 53.7-fold) and isolated astomatous fruit and leaf CM of a range of species (on average 23.0-fold). Partitioning water transport into stomatal and cuticular components revealed that permeability of the sweet cherry fruit cuticle for water uptake was 11.9-fold higher and that of stomata 56.8-fold higher than the respective permeability during transpiration. Increasing water vapor activity in the receiver from 0 to 1 increased permeability during transpiration across isolated sweet cherry fruit CM about 2.1-fold. Permeability for vapor uptake from saturated water vapor into a PEG 6000 receiver solution was markedly lower than from liquid water, but of similar magnitude to the permeability during self-diffusion of (3)H(2)O in the absence of osmotica. The energy of activation for self-diffusion of water across ES or CM was higher than for osmotic water uptake and decreased with increasing stomatal density. The data indicate that viscous flow along an aqueous continuum across the sweet cherry fruit exocarp and across the astomatous CM of selected species accounted for the higher permeability during water uptake as compared to self-diffusion or transpiration.

Biological Transport↗

PubMed2004

Changes in strain and deposition of cuticle in developing sweet cherry fruit.

Changes in surface area, deposition and elastic strain of the cuticular membrane (CM) were monitored during development of sweet cherry (Prunus avium L.) fruit. Fruit mass and surface area ('Sam') increased in a sigmoidal pattern between 16 and 85 days after full bloom (DAFB) with maximum rates of 0.35 g day(-1) and 0.62 cm(2) day(-1), respectively. Rates of total area strain, namely the sum of elastic plus plastic strain, were highest in cheek and stem cavity regions followed by stylar and suture regions. Rates of total uniaxial strain were higher in transverse, namely perpendicular to the stem/stylar axis, than in longitudinal direction, namely parallel to the stem/stylar axis. On a whole fruit basis CM mass remained essentially constant during fruit development. Mass of CM, dewaxed CM and wax per unit surface area decreased during development, particularly between 43 and 71 DAFB. There was no change in wax content of isolated CM. Up to 43 DAFB the surface area of isolated CM was similar to the area prior to excision indicating little elastic strain, but markedly decreased thereafter. Calculating elastic and plastic components of total strain of the CM revealed, that initial deformation up to 22 to 43 DAFB was mostly plastic. Thereafter, elastic strain was evident and both, elastic and plastic deformation, increased linearly with an increase in total strain. There was no consistent difference in the relative contribution of elastic strain to total strain between transverse and longitudinal directions, but both total and elastic strain were larger in the transverse direction. Abrading the CM had only little effect on fruit turgor. However, turgor decreased when the exocarp was cut indicating that the exocarp provided a significant structural shell of a mature sweet cherry fruit ('Regina'). Our data demonstrate, that (1) surface area expansion in sweet cherry fruit causes elastic and plastic strain of the CM, and (2) the onset of elastic strain coincided with the cessation of CM formation.

Journal Article↗

PubMed2002

Studies on water transport through the sweet cherry fruit surface. 7. Fe3+ and Al3+ reduce conductance for water uptake.

The effects of the chloride salts LiCl, CaCl(2), MgCl(2), AlCl(3), EuCl(3), and FeCl(3) and the iron salts FeCl(2), FeCl(3), Fe(NO(3))(3), FeSO(4), and Fe(2)(SO(4))(3) on water conductance of exocarp segments (ES) and rates of water uptake into detached sweet cherry fruit (Prunus avium L. cv. Adriana, Early Rivers, Namare, Namosa, and Sam) were studied. ES were excised from the cheek of mature fruit and mounted in stainless steel diffusion cell; water penetration was monitored gravimetrically from donor solutions containing the above mineral salts into a PEG 6000 (osmolality = 1.14 osM, pH 4.8, 25 degrees C) receiver solution. Conductance of ES was calculated from the amount of water taken up per unit of surface area and time by dividing by the gradient in water activity across ES. LiCl, CaCl(2), MgCl(2), FeCl(2), and FeSO(4) had no significant effect on conductance, but AlCl(3), FeCl(3), Fe(NO(3))(3), and Fe(2)(SO(4))(3) significantly reduced conductance compared to water only as a donor. Also, EuCl(3) lowered conductance; however, this effect was not always significant. Effects of salts on water conductance of ES and rates of water uptake into detached fruit were closely related (R 2 = 0.97***). Upon application of an FeCl(3)-containing donor conductance decreased instantaneously. FeCl(3) concentrations of <6.6 x 10(-)(4) M had no effect on conductance, but concentrations at or above this threshold decreased conductance. FeCl(3) lowered water conductance at a receiver pH of 4.8, but not at pH < or =2.6. The effect of FeCl(3) on conductance was largest in cv. Namare and smallest in cv. Adriana. There was no significant effect of FeCl(3) on conductance for transpiration. Formation of aluminum and iron oxides and hydroxides in the exocarp as a result of a pH gradient between donor and receiver solution is discussed as the potential mechanism for Fe(3+) and Al(3+) reducing conductance for water uptake.

Aluminum Chloride↗