PubMed Health⌕ Search

Biomedical subjects

Marek Pruski

Publications and source records attributed to Marek Pruski.

13 recordsLinked to original sources
PubMed2005

SPAM-MQ-HETCOR: an improved method for heteronuclear correlation spectroscopy between quadrupolar and spin-1/2 nuclei in solid-state NMR.

The recently introduced concept of soft pulse added mixing (SPAM) is used in two-dimensional heteronuclear correlation (HETCOR) NMR experiments between half-integer quadrupolar and spin-1/2 nuclei. The experiments employ multiple quantum magic angle spinning (MQMAS) to remove the second order quadrupolar broadening and cross polarization (CP) or refocused INEPT for magnetization transfer. By using previously unexploited coherence pathways, the efficiency of SPAM-MQ-HETCOR NMR is increased by a factor of almost two without additional optimization. The sensitivity gain is demonstrated on a test sample, AlPO(4)-14, using CP and INEPT to correlate (27)Al and (31)P nuclei. SPAM-3Q-HETCOR is then applied to generate (27)Al-(31)P spectra of the devitrified 41Na(2)O-20.5Al(2)O(3)-38.5P(2)O(5) glass and the silicoaluminophosphate ECR-40. Finally, the method allowed the acquisition of the first high resolution solid-state correlation spectra between (27)Al and (29)Si.

Aluminum↗
PubMed2005

Dialkylaminopyridine-functionalized mesoporous silica nanosphere as an efficient and highly stable heterogeneous nucleophilic catalyst.

A new nucleophilic catalytic system comprised of dialkylaminopyridine-functionalized mesoporous silica nanosphere (DMAP-MSN) has been synthesized and characterized. We have demonstrated that this material is an efficient heterogeneous catalyst for Baylis-Hillman, acylation, and silylation reactions with good reactivity, product selectivity, and recyclability. We envision that this DMAP-functionalized mesoporous silica material can also serve as an effective heterogeneous catalyst for many other catalytic nucleophilic reactions.

Aminopyridines↗
PubMed2005

Studies of organically functionalized mesoporous silicas using heteronuclear solid-state correlation NMR spectroscopy under fast magic angle spinning.

Highly resolved solid-state HETCOR NMR spectra between protons and low gamma nuclei ((13)C and (29)Si) can be suitably obtained on surfaces using a "brute force" (1)H-(1)H decoupling by MAS at rates > or =40 kHz. Despite a small rotor volume (<10 microL), a (1)H-(13)C HETCOR spectrum of allyl groups (AL, -CH(2)-CH=CH(2)) covalently anchored to the surface of MCM-41 silica was acquired without using isotope enrichment. The advantages of using fast MAS in such studies include easy setup, robustness, and the opportunity of using low RF power for decoupling. In the case of the (1)H-(29)Si HETCOR experiment, the sensitivity can be dramatically increased, in some samples by more than 1 order of magnitude, through implementing into the pulse sequence a Carr-Purcell-Meiboom-Gill train of pi pulses at the (29)Si spin frequency. The use of low-power heteronuclear decoupling is essential in the (1)H-(29)Si CPMG-HETCOR experiment, due to unusually long acquisition periods. These methods provided detailed structural characterization of the surface of AL-MCM mesoporous silica.

Journal Article↗
PubMed2005

Solid-state NMR study of MCM-41-type mesoporous silica nanoparticles.

A systematic study of the surface of MCM-41-type mesoporous silica nanoparticles prepared under low surfactant concentration was carried out using high-resolution solid-state nuclear magnetic resonance spectroscopy. The structures and concentrations of various species present during dehydration and rehydration of mesoporous silicas between -25 and 500 degrees C were detailed by employing one-dimensional and two-dimensional (1)H, (13)C, and (29)Si NMR, including (1)H signal intensity measurements, (1)H-(1)H homonuclear correlation experiments (double quantum, exchange, and RFDR), and (1)H-(29)Si heteronuclear correlation NMR. These experiments employed high MAS rates of up to 45 kHz. The study shows that the surfactant (CTAB) was almost completely removed by acid extraction. The residual molecules assumed prone positions along the pores, with the tailgroup being most mobile. The weakly adsorbed water was hydrogen bonded to the silanol groups, all of which were involved in such bonds under ambient humidity. Specific structures involving water and silanol groups were proposed for various stages of thermal treatment, which included dehydration, dehydroxylation, and subsequent rehydration.

Journal Article↗
PubMed2004

Gatekeeping layer effect: a poly(lactic acid)-coated mesoporous silica nanosphere-based fluorescence probe for detection of amino-containing neurotransmitters.

We have synthesized a poly(lactic acid) coated MCM-41-type mesoporous silica nanosphere (PLA-MSN) material can serve as a fluorescence sensor system for detection of amino-containing neurotransmitters in neutral aqueous buffer. Utilizing the PLA layer as a gatekeeper, we investigated the molecular recognition events between several structurally simple neurotransmitters, i.e., dopamine, tyrosine, and glutamic acid and a pore surface-anchored o-phthalic hemithioacetal (OPTA) group, which functions as a fluorescence-sensing group that can react with the neurotransmitters with primary amine groups and form the corresponding fluorescent isoindole products. The poly(lactic acid) layer of the PLA-MSN sensor showed a unique "sieving" effect that regulates the rates of diffusion of the amino acid-based neurotransmitters into the sensor mesopores of the material.

Acetals↗
PubMed2004

Controlling the selectivity of competitive nitroaldol condensation by using a bifunctionalized mesoporous silica nanosphere-based catalytic system.

A series of bifunctionalized mesoporous silica nanosphere-based (MSN) heterogeneous catalysts for the nitroaldol (Henry) reaction have been synthesized. A common 3-[2-(2-aminoethylamino)ethylamino]propyl (AEP) primary group and three different secondary groups, ureidopropyl (UDP), mercaptopropyl (MP), and allyl (AL) functionalities, were incorporated to these mesoporous silica materials by introducing equal amounts of AEP-trimethoxysilane with UDP-, MP-, or AL-trialkoxysilane precursors to our previously reported co-condensation reaction. Structures and relative concentrations of the functional groups were detailed by solid-state NMR and other spectroscopic techniques. The AEP group served as a catalyst, and the other secondary groups provided different noncovalent interactions to reactants and thereby controlled the reaction selectivity. By varying the secondary group in these bifunctionalized MSN catalysts, we investigated the selectivity of a nitroaldol reaction of two competing benzaldehydes reacting with nitromethane by measuring the molar ratio of the nitroalkene products. The selectivity of the bifunctionalized MSN catalysts could be systematically tuned simply by varying the physicochemical properties of the pore surface-bound secondary groups, i.e., polarity and hydrophobicity.

Journal Article↗
PubMed2002

Oxidative polymerization of 1,4-diethynylbenzene into highly conjugated poly(phenylene butadiynylene) within the channels of surface-functionalized mesoporous silica and alumina materials.

A polyalkynylene-based conducting polymer (molecular wire) has been synthesized within the Cu-functionalized mesoporous MCM-41 silica catalyst. Fluorescence and 13C solid-state NMR provided spectroscopic evidence that the synthesis of extended polymeric chains with a high degree of alignment requires homogeneously distributed catalytic sites throughout the entire MCM matrix. This type of homogeneity has been achieved via co-condensation of the catalytic groups in narrow pores. In addition, our results indicated that proper adjustment of the pore diameter is vital to prevent clogging of the pores with aggregated or cross-linked polymers or both.

Journal Article↗
PubMed2002

Solvent-free mechanochemical synthesis of two Pt complexes: cis-(Ph3P)2PtCl2 and cis-(Ph3P)2PtCO3.

Cis-(Ph3P)2PtCl2 and cis-(Ph3P)2PtCO3 were prepared mechanochemically from solid reactants in the absence of a solvent; cis-(Ph3P)2PtCl2 was obtained in 98% yield after ball-milling of polycrystalline PtCl2 and Ph3P; the mechanically induced solid-state reaction of cis-(Ph3P)2PtCl2 with an excess of anhydrous K2CO3 produced cis-(Ph3P)2PtCO3 in 70% yield; the formation of transition metal complexes as a result of mechanochemical solvent-free reactions has been confirmed by means of solid-state 31P MAS NMR spectroscopy, X-ray powder diffraction and differential thermal analysis.

Journal Article↗
PubMed2002

17O MAS and 3QMAS NMR investigation of crystalline V(2)O(5) and layered V(2)O(5).nH(2)O gels.

The environments for oxygen sites in crystalline V(2)O(5) and in layered vanadia gels produced via sol-gel synthesis have been investigated using (17)O MAS and 3QMAS NMR. For crystalline V(2)O(5), three structural oxygen sites were observed: V=O (vanadyl), V(2)O (doubly coordinated), and V(3)O (triply coordinated). Line-shape parameters for these sites were determined from numerical simulations of the MAS spectra. For the vanadia gels at various stages of dehydration, assignments have been proposed for numerous vanadyl, doubly coordinated, and triply coordinated oxygen sites. In addition, by correlating the (17)O MAS and 3QMAS NMR, (51)V MAS NMR, and thermogravimetric analysis data, the coordination of water sites has been established. On the basis of these results, the gel structure and its evolution at various stages of hydration have been detailed. Upon rehydration of the layered gel, we observed a preferred site for initial water readsorption. The oxygen atoms of these readsorbed water molecules readily exchanged into all types of oxygen sites even at room temperature.

Journal Article↗
PubMed2002

Mechanically induced solid-state generation of phosphorus ylides and the solvent-free Wittig reaction.

We describe the nearly quantitative preparation of phosphorus ylides and the Wittig reaction occurring in the solid sate during high-energy mechanochemical processing. Initial insights into the details of the discovered chemical transformations indicate that high-energy mechanical processing supports the interaction of reacting centers by breaking crystallinity of the reactants and by providing mass transfer without a solvent.

Journal Article↗
PubMed2002

Solvent-free mechanochemical synthesis of phosphonium salts.

Phosphonium salts have been prepared during high-energy ball-milling of triphenylphosphine with solid organic bromides; the reactions occur at ambient conditions without a solvent; in the case of 2-bromo-2-phenylacetophenone the reaction in a solution usually produces a mixture containing both the C-phosphorylated and O-phosphorylated compounds, while the solvent-free mechanically induced transformation results in the thermodynamically favorable C-phosphorylated product; the occurrence of the observed transformations during mechanical processing of solid reactants is confirmed by the solid-state 31P NMR spectroscopy and X-ray powder diffraction.

Chemistry, Pharmaceutical↗