Biomedical subjects

Marité Cárdenas

Publications and source records attributed to Marité Cárdenas.

9 recordsLinked to original sources

PubMed2007

Human saliva forms a complex film structure on alumina surfaces.

Films formed from saliva on surfaces are important for the maintenance of oral health and integrity by protection against chemical and/or biological agents. The aim of the present study was to investigate adsorbed amounts, thickness, and structure of films formed from human whole saliva on alumina surfaces by means of in situ ellipsometry, neutron reflectivity, and atomic force microscopy. Alumina (Al2O3, synthetic sapphire) is a relevant and interesting substrate for saliva adsorption studies as it has an isoelectric point close to that of tooth enamel. The results showed that saliva adsorbs rapidly on alumina. The film could be modeled in two layers: an inner and dense thin region that forms a uniform layer and an outer, more diffuse and thicker region that protrudes toward the bulk of the solution. The film morphology described a uniformly covering dense layer and a second outer layer containing polydisperse adsorbed macromolecules or aggregates.

Adsorption↗

PubMed2006

Thiol-specific and nonspecific interactions between DNA and gold nanoparticles.

The contribution of nonspecific interactions to the overall interactions of thiol-ssDNA and dsDNA macromolecules with gold nanoparticles was investigated. A systematic investigation utilizing dynamic light scattering and cryogenic transmission electron microscopy has been performed to directly measure and visualize the changes in particle size and appearance during functionalization of gold nanoparticles with thiol-ssDNA and nonthiolated dsDNA. The results show that both thiol-ssDNA and dsDNA do stabilize gold nanoparticle dispersions, but possible nonspecific interactions between the hydrophobic DNA bases and the gold surface promote interparticle interactions and cause aggregation within rather a short period of time. We also discuss the adsorption mechanisms of dsDNA and thiol-ssDNA to gold particles.

Adsorption↗

PubMed2006

Layer-by-layer assembly of mucin and chitosan--Influence of surface properties, concentration and type of mucin.

Bovine submaxillary mucin (BSM) and chitosan were used to build layer-by-layer structures on solid substrates. The build-up was monitored using in situ ellipsometry to obtain time resolved values of the thickness and adsorbed amount. Additionally surface morphology during build-up was studied by atomic force microscopy (AFM). It was found that the adsorbed amount of the film increases approximately linearly with each deposition cycle on hydrophobized silica whereas construction on silica was found not to be possible at the experimental conditions used. We conclude that sufficient amount of the first mucin layer is crucial for the subsequent multilayer formation. The complex build-up kinetics on hydrophobized silica is characterized by adsorption and redissolution processes and the overall growth is the sum of both processes. AFM imaging on hydrophobized silica also confirmed the presence of redissolution processes and chitosan addition led to a reduction both in the number of surface aggregates and in the roughness of the surface. The present work also shows that by adjusting the relative concentrations of the polyelectrolytes it is possible to change the growth rate considerably. The final structures after deposition of 8 bilayers were found to have a high content of water and film stability test revealed that a substantial amount dissolves when increasing electrolyte concentration or pH of the ambient solution. Human mucin from saliva (MUC5B) was also used to create multilayers with chitosan on hydrophobized silica and it was revealed that no redissolution appears to be present in this system.

Adsorption↗

PubMed2005

DNA compaction onto hydrophobic surfaces by different cationic surfactants.

DNA compaction by alkyltrimethylammonium surfactants at hydrophobized silica surfaces and the effect of the counterion, as well as the hydrocarbon chain length, was investigated by in situ null-ellipsometry. In addition, DNA compaction in the presence of a gemini surfactant, hexyl-alpha,omega-bis(dodecyldimethylammonium bromide), was studied. The type of cationic amphiphile used was found not to have a pronounced effect on the mixed DNA-cationic surfactant adsorbed layer thickness, although the surface concentration excess for the mixed layers seemed to follow the same trend as that for DNA-free surfactant layers. Interestingly, it was also found that the stability of the mixed adsorbed layer largely depends on the cationic surfactant used.

Animals↗

PubMed2005

The interaction between DNA and cationic lipid films at the air-water interface.

The interaction between DNA and positively charged dioctadecyldimethylammonium bromide (DODAB) and DODAB/disteroylphosphatidylcholine (DSPC) monolayers at the air-aqueous interface was studied by a combination of the surface film balance and Brewster angle microscopy. In presence of DNA, the Pi-A isotherm of the cationic monolayer shifts to larger mean molecular areas due to the electrostatic interaction with DNA while the typical liquid expanded-liquid condensed phase transition for DODAB monolayers disappear and the monolayer remains to be in the liquid expanded phase. Furthermore, the morphology of the film dramatically changes, where the large dendritic-like condensed aggregates observed for DODAB monolayers vanish. The charge density of the monolayer was varied by using mixed monolayers with the zwitterionic DSPC and no large effect was observed on the interaction with DNA. By modeling the electrostatic interactions with the linearized Poisson-Boltzmann equation using the finite-element method and taking into account the assumption in the dielectric constants of the system, it was possible to corroborate the expansion of the cationic monolayer upon interaction with DNA as well as the fact that DNA does not seem to penetrate into the monolayer.

Air↗

PubMed2005

SANS study of the interactions among DNA, a cationic surfactant, and polystyrene latex particles.

The compaction of DNA by a cationic surfactant both in the bulk and adsorbed on the surface of latex particles was followed for the first time by SANS. In the bulk, a decrease in the overall size of the DNA coil in the presence of the cationic surfactant was observed at a negative-to-positive charge ratio far below the phase separation region, at a negative-to-positive charge ratio of 18. Additionally, large surfactant aggregates seem to form within the DNA-surfactant complex. On the other hand, DNA adsorbs onto the surface of latex particles, forming a thick layer, as evidenced by the fitting of the SANS data to a core-shell form factor. Addition of a cationic surfactant to the DNA-coated latex particles at a negative-to-positive charge ratio of 38 induces a slight decrease in the size of the particle layer, where the cationic surfactant is evenly distributed within the adsorbed layer. A further decrease of the negative-to-positive charge ratio to 18 induces a dramatic change in the SANS data that suggests significant compaction of the adsorbed layer and the formation of large surfactant aggregates, similar to those detected in the bulk.

Adsorption↗

PubMed2004

DNA and cationic surfactant complexes at hydrophilic surfaces. An ellipsometry and surface force study.

The adsorption and formation of DNA and cationic surfactant complexes at the silica-aqueous interface have been studied by ellipsometry. The interaction between the DNA-surfactant complexes at the mica-aqueous interface has been determined by the interferometric surface force apparatus. Adsorption was as expected not observed on negatively charged hydrophilic surfaces for DNA and when DNA-cationic surfactant complexes were negatively charged. However, adsorption was observed when there is an excess of cationic surfactant, just below the point of phase separation. The adsorption process requires hours to reach steady state. The adsorbed layer thickness is large at low surface coverage but becomes more compact and thinner at high coverage. A long-range repulsive force was observed between adsorbed layers of DNA-cationic surfactant complexes, which was suggested to be of both electrostatic and steric origin. The forces were found to be dependent on the equilibration time and the experimental pathway.

Adsorption↗

PubMed2003

Preparation of indigestible pyrodextrins from different starch sources.

Starch-modifying processes, such as pyrodextrinization, are potential ways to alter the nutritional features of this polysaccharide. A widely used method for pyrodextrinizing maize starch was also applied to lentil, sorghum, cocoyam, sagu, and cassava starches, and the in vitro digestibility of the products was evaluated. Pyrodextrins were produced by heating starch at 140 degrees C for 3 h, with catalytic amounts of HCl. The enzymatically available starch content of all preparations decreased by 55-65% after modification. Thus, pyrodextrinization seems to be an effective way to produce indigestible glucans from different starches. Pyrodextrins obtained were complex mixtures of starch derivatives with a wide range of molecular weight as estimated by gel filtration chromatography. Both their molecular weight profiles and contents of indigestible fractions varied with starch source. Experiments with lentil and cassava starches showed that changing dextrinization conditions also affects the susceptibility to enzymatic hydrolysis of the product.

Chemical Phenomena↗

PubMedDate not supplied

Interaction between DNA and charged colloids could be hydrophobically driven.

The interaction of DNA with amino-functionalized polystyrene particles has been studied by using a dynamic light scattering (DLS) technique. In 10 mM NaBr solution the particles have a hydrodynamic radius of 76 nm and the DNA macromolecule investigated (double stranded) has a hydrodynamic radius of 107 nm. At very low DNA concentrations, DNA adopts a flat conformation on the particle surface. If the DNA concentration is increased above 0.1 microg/mL, the thickness of the DNA layer increases, suggesting the presence of large loops and tails. Although the particles contain primary amino groups, they have a negative net charge under the conditions used in this work. Thus, the driving force for DNA adsorption is not of electrostatic origin but rather due to a hydrophobic effect. Addition of cationic surfactant to the DNA-precoated amino-functionalized particles induces changes in the adsorbed layer conformation, in agreement with the coadsorption of cationic surfactant.

Adsorption↗