PubMed Health⌕ Search

Biomedical subjects

Mark F Teaford

Publications and source records attributed to Mark F Teaford.

10 recordsLinked to original sources

Dental microwear texture analysis: technical considerations.

Dental microwear analysis is commonly used to infer aspects of diet in extinct primates. Conventional methods of microwear analysis have usually been limited to two-dimensional imaging studies using a scanning electron microscope and the identification of apparent individual features. These methods have proved time-consuming and prone to subjectivity and observer error. Here we describe a new methodological approach to microwear: dental microwear texture analysis, based on three-dimensional surface measurements taken using white-light confocal microscopy and scale-sensitive fractal analysis. Surface parameters for complexity, scale of maximum complexity, anisotropy, heterogeneity, and textural fill volume offer repeatable, quantitative characterizations of three-dimensional surfaces, free of observer measurement error. Some results are presented to illustrate how these parameters distinguish extant primates with different diets. In this case, microwear surfaces of Cebus apella and Lophocebus albigena, which consume some harder food items, have higher average values for complexity than do folivores or soft fruit eaters.

Alouattinae↗

Molar microwear in Praeanthropus afarensis: evidence for dietary stasis through time and under diverse paleoecological conditions.

Molar microwear fabrics in extant mammals vary with diet and, more particularly, the physical properties of the items that are consumed. Praeanthropus afarensis is well represented in the fossil record over a prolonged and radiometrically controlled temporal span, and reasonably robust paleoecological reconstructions are available for the various localities from which it is known. We therefore examined molar microwear in this species to determine whether diet varied in relation to time or in response to different ecological conditions. Of more than 70 specimens of Pr. afarensis that contain one or more worn permanent molars, only 19 were found to be suitable for microwear analysis. These derive from eight temporal horizons in the Laetolil Beds and Hadar Formation spanning approximately 400kyr (3.6-3.2Ma). Six paleoecological categories have been reconstructed for these horizons, and these were ranked on the basis of floral cover. None of the microwear variables observed for Pr. afarensis is significantly associated with either temporal or paleoecological rank. Thus, microwear and, by extension, diet does not appear to have altered significantly in Pr. afarensis through time or in response to different paleoecological circumstances. The wear pattern that appears to have characterized Pr. afarensis overlaps extensively that of Gorilla gorilla beringei and differs notably from the fabrics of extant primates (e.g., Cebus apella and Cercocebus albigena) that consume hard objects. The high proportion of scratches on Pr. afarensis molars suggests the inclusion of fine abrasives in or on the food items consumed by those individuals sampled in this study. Although Pr. afarensis may have been morphologically equipped to process hard, brittle items, the microwear data suggest that it did not necessarily do so, even in the face of varying environmental circumstances. Explanatory scenarios that describe Pr. afarensis as part of an evolutionary trajectory involving a more heavily masticated diet with an increased reliance on hard, brittle items need to be reconsidered. However, fallback foods that were consumed during relatively short, albeit critical periods may have exerted sufficient selective pressure to explain the evolution of the comparatively robust Pr. afarensis trophic apparatus. Because it is unlikely that many individuals from such restricted temporal intervals would be sampled in the paleontological record, we suggest that the most productive approach to the elucidation of paleodiet is the integration of genetic (morphological) and epigenetic (microwear and isotopic) lines of evidence.

Animals↗

Do mandibular cross-sectional properties and dental microwear give similar dietary signals?

Previous animal experimental work evaluating the effects of dietary consistency on mastication was generally limited to studies of either mandibular structure or rates and types of tooth wear. Control groups fed hard diets (HD) consistently exhibited increased cortical remodeling and/or bone strength when compared to groups fed soft diets (SD). Results of tooth-wear studies showed faster rates of tooth wear in HD animals. This study evaluates the effects of dietary differences on both mandibular structural morphology and postcanine dental microwear in the same animals. We examined mandibles and dentitions from eight miniature swine, raised from 4 weeks to 9 months of age on HD and SD (n = 4, each group). Mandibular structural properties were calculated from peripheral quantitative computed tomography slices at the dp3-dp4 and dp4-M1 junctions. Dental microwear analysis was performed on mandibular lingual crushing facets of dp4 and M1, using photomicrographs of high-resolution casts taken at 500x magnification in a scanning electron microscope. Our results suggest that between the dp3-dp4 contact, HD animals have mandibles that are stronger and more rigid mediolaterally than SD animals. At the dp4-M1 contact, HD animals have mandibles that are stronger and more rigid mediolaterally, dorsoventrally, and in torsion than SD animals. Dental microwear results indicate that SD pigs have higher incidences of pitting and more overall microwear features on their premolars than do HD pigs, yet there are no significant differences in molar microwear morphology between the dietary groups. Near-significant correlations exist between pit size and dorsoventral bending strength, but only for HD pigs. These results suggest that dietary consistency significantly affects both mandibular structure and dental microwear, yet direct correlations between the two are complicated by a number of factors.

Animals↗

Dental microwear and diets of African early Homo.

Conventional wisdom ties the origin and early evolution of the genus Homo to environmental changes that occurred near the end of the Pliocene. The basic idea is that changing habitats led to new diets emphasizing savanna resources, such as herd mammals or underground storage organs. Fossil teeth provide the most direct evidence available for evaluating this theory. In this paper, we present a comprehensive study of dental microwear in Plio-Pleistocene Homo from Africa. We examined all available cheek teeth from Ethiopia, Kenya, Tanzania, Malawi, and South Africa and found 18 that preserved antemortem microwear. Microwear features were measured and compared for these specimens and a baseline series of five extant primate species (Cebus apella, Gorilla gorilla, Lophocebus albigena, Pan troglodytes, and Papio ursinus) and two protohistoric human foraging groups (Aleut and Arikara) with documented differences in diet and subsistence strategies. Results confirmed that dental microwear reflects diet, such that hard-object specialists tend to have more large microwear pits, whereas tough food eaters usually have more striations and smaller microwear features. Early Homo specimens clustered with baseline groups that do not prefer fracture resistant foods. Still, Homo erectus and individuals from Swartkrans Member 1 had more small pits than Homo habilis and specimens from Sterkfontein Member 5C. These results suggest that none of the early Homo groups specialized on very hard or tough foods, but that H. erectus and Swartkrans Member 1 individuals ate, at least occasionally, more brittle or tough items than other fossil hominins studied.

Africa, Eastern↗

Dental microwear texture analysis shows within-species diet variability in fossil hominins.

Reconstructing the diets of extinct hominins is essential to understanding the paleobiology and evolutionary history of our lineage. Dental microwear, the study of microscopic tooth-wear resulting from use, provides direct evidence of what an individual ate in the past. Unfortunately, established methods of studying microwear are plagued with low repeatability and high observer error. Here we apply an objective, repeatable approach for studying three-dimensional microwear surface texture to extinct South African hominins. Scanning confocal microscopy together with scale-sensitive fractal analysis are used to characterize the complexity and anisotropy of microwear. Results for living primates show that this approach can distinguish among diets characterized by different fracture properties. When applied to hominins, microwear texture analysis indicates that Australopithecus africanus microwear is more anisotropic, but also more variable in anisotropy than Paranthropus robustus. This latter species has more complex microwear textures, but is also more variable in complexity than A. africanus. This suggests that A. africanus ate more tough foods and P. robustus consumed more hard and brittle items, but that both had variable and overlapping diets.

Animals↗

Dietary inferences from dental occlusal microwear at Mission San Luis de Apalachee.

San Luis de Apalachee, one of a chain of Roman Catholic missions established in Spanish Florida (modern states of Georgia and Florida) in the sixteenth and seventeenth centuries, was the principal center of missionization of native populations in the Florida panhandle. Paleoethnobotanical remains yield evidence of production of various kinds of crops at the site, typical of nearly all mission period sites in the area. Stable isotope (carbon and nitrogen) analysis and dental caries evidence suggest that maize was not as important in the diet at San Luis as in other contemporary settings in the region. Ethnohistorical research indicates a heavier reliance on meat consumption compared to other mission settings. This study examines dental microwear of occlusal surfaces of maxillary molars from San Luis and five other Native American mission period sites in Spanish Florida. Epoxy casts of molar crushing facets were photographed under 500x magnification, using a scanning electron microscope. Photomicrographs were digitized using Microware 4.02 (Ungar [2002a]) and statistically evaluated using one-way ANOVA and post hoc Tukey's multiple comparisons tests. These analyses reveal that the frequency of pitting on the San Luis molars is significantly greater than for other mission period sites. Consistent with bioarchaeological, historical, and archaeological documentation, these findings suggest that diets were different in the San Luis natives in comparison with the other native populations in Spanish Florida. Various dietary factors likely came into play, resulting in these differences, and may have included significantly greater meat consumption at San Luis.

Analysis of Variance↗

Molar microwear and dietary reconstructions of fossil cercopithecoidea from the Plio-Pleistocene deposits of South Africa.

The South African Plio-Pleistocene cave deposits have yielded a diverse cercopithecoid fauna. In this study, the possible dietary proclivities of these extinct species are examined using details of molar microwear. Although sample sizes are often small, wear patterns suggest possible temporal changes in the diets of Parapapio jonesi from Makapansgat to Sterkfontein, of Papio robinsoni from Sterkfontein to Swartkrans, and Cercopithecoides williamsi from Makapansgat to Sterkfontein to Swartkrans. However, there does not appear to have been a significant change in the dietary habits of Parapapio broomi over time. The microwear patterns of the two temporally successive congeners, Theropithecus darti and T. oswaldi show no significant differences from one another. The sympatric congeners, Parapapio broomi and Pp. jonesi, have microwear signatures that differ significantly at Makapansgat (Members 3 and 4) but not at Sterkfontein (Member 4). Finally, the microwear analyses suggest that the extinct cercopithecoid species did not necessarily have diets similar to those of their closest living relatives.

Animals↗

Dental topography and molar wear in Alouatta palliata from Costa Rica.

Paleoprimatologists depend on relationships between form and function of teeth to reconstruct the diets of fossil species. Most of this work has been limited to studies of unworn teeth. A new approach, dental topographic analysis, allows the characterization and comparison of worn primate teeth. Variably worn museum specimens have been used to construct species-specific wear sequences so that measurements can be compared by wear stage among taxa with known differences in diet. This assumes that individuals in a species tend to wear their molar teeth in similar ways, a supposition that has yet to be tested. Here we evaluate this assumption with a longitudinal study of changes in tooth form over time in primates. Fourteen individual mantled howling monkeys (Alouatta palliata) were captured and then recaptured after 2, 4, and 7 years when possible at Hacienda La Pacifica in Costa Rica between 1989-1999. Dental impressions were taken each time, and molar casts were produced and analyzed using dental topographic analysis. Results showed consistent decreases in crown slope and occlusal relief. In contrast, crown angularity, a measure of surface jaggedness, remained fairly constant except with extreme wear. There were no evident differences between specimens collected in different microhabitats. These results suggest that different individual mantled howling monkeys wear their teeth down in similar ways, evidently following a species-specific wear sequence. Dental topographic analysis may therefore be used to compare morphology among similarly worn individuals from different species.

Alouatta↗