Biomedical subjects

Mark I Donnelly

Publications and source records attributed to Mark I Donnelly.

7 recordsLinked to original sources

PubMed2006

An expression vector tailored for large-scale, high-throughput purification of recombinant proteins.

Production of milligram quantities of numerous proteins for structural and functional studies requires an efficient purification pipeline. We found that the dual tag, his(6)-tag-maltose-binding protein (MBP), intended to facilitate purification and enhance proteins' solubility, disrupted such a pipeline, requiring additional screening and purification steps. Not all proteins rendered soluble by fusion to MBP remained soluble after its proteolytic removal, and in those cases where the protein remained soluble, standard purification protocols failed to remove completely the stoichiometric amount of his(6)-tagged MBP generated by proteolysis. Both liabilities were alleviated by construction of a vector that produces fusion proteins in which MBP, the his(6)-tag and the target protein are separated by highly specific protease cleavage sites in the configuration MBP-site-his(6)-site-protein. In vivo cleavage at the first site by co-expressed protease generated untagged MBP and his(6)-tagged target protein. Proteins not truly rendered soluble by transient association with MBP precipitated, and untagged MBP was easily separated from the his-tagged target protein by conventional protocols. The second protease cleavage site allowed removal of the his(6)-tag.

Animals↗

PubMed2004

Production of selenomethionine-labeled proteins in two-liter plastic bottles for structure determination.

A simplified approach developed recently for the production of heterologous proteins in Escherichia coli uses 2-liter polyethylene terephthalate beverage bottles as disposable culture vessels [Sanville Millard, C. et al. 2003. Protein Expr. Purif. 29, 311-320]. The method greatly reduces the time and effort needed to produce native proteins for structural or functional studies. We now demonstrate that the approach is also well suited for production of proteins in defined media with incorporation of selenomethionine to facilitate structure determination by multiwavelength anomalous diffraction. Induction of a random set of Bacillus stearothermophilus target genes under the new protocols generated soluble selenomethionyl proteins in good yield. Several selenomethionyl proteins were purified in good yields and three were subjected to amino acid analysis. Incorporation of selenomethionine was determined to be greater than 95% in one protein and greater than 98% in the other two. In the preceding paper [Zhao et al., this issue, pp. 87-93], the approach is further extended to production of [U-15N]- or [U-13C, U-15N]-labeled proteins. The approach thus appears suitable for high-throughput production of proteins for structure determination by X-ray crystallography or nuclear magnetic resonance spectroscopy.

Bacterial Proteins↗

PubMed2004

Cloning and characterization of three fatty alcohol oxidase genes from Candida tropicalis strain ATCC 20336.

Candida tropicalis (ATCC 20336) converts fatty acids to long-chain dicarboxylic acids via a pathway that includes among other reactions the oxidation of omega-hydroxy fatty acids to omega-aldehydes by a fatty alcohol oxidase (FAO). Three FAO genes (one gene designated FAO1 and two putative allelic genes designated FAO2a and FAO2b), have been cloned and sequenced from this strain. A comparison of the DNA sequence homology and derived amino acid sequence homology between these three genes and previously published Candida FAO genes indicates that FAO1 and FAO2 are distinct genes. Both genes were individually cloned and expressed in Escherichia coli. The substrate specificity and K(m) values for the recombinant FAO1 and FAO2 were significantly different. Particularly striking is the fact that FAO1 oxidizes omega-hydroxy fatty acids but not 2-alkanols, whereas FAO2 oxidizes 2-alkanols but not omega-hydroxy fatty acids. Analysis of extracts of strain H5343 during growth on fatty acids indicated that only FAO1 was highly induced under these conditions. FAO2 contains one CTG codon, which codes for serine (amino acid 177) in C. tropicalis but codes for leucine in E. coli. An FAO2a construct, with a TCG codon (codes for serine in E. coli) substituted for the CTG codon, was prepared and expressed in E. coli. Neither the substrate specificity nor the K(m) values for the FAO2a variant with a serine at position 177 were radically different from those of the variant with a leucine at that position.

Alcohol Oxidoreductases↗

PubMed2003

A less laborious approach to the high-throughput production of recombinant proteins in Escherichia coli using 2-liter plastic bottles.

Contemporary approaches to biology often call for the high-throughput production of large amounts of numerous proteins for structural or functional studies. Even with the highly efficient protein expression systems developed in Escherichia coli, production of these proteins is laborious and time-consuming. We have simplified established protocols by the use of disposable culture vessels: common 2-liter polyethylene terephthalate beverage bottles. The bottles are inexpensive, fit conveniently in commonly available flask holders, and, because they are notched, provide sufficient aeration to support the growth of high-density cultures. The use of antibiotics and freshly prepared media alleviates the need for sterilization of media and significantly reduces the labor involved. Uninoculated controls exhibited no growth during the time required for protein expression in experimental cultures. The yield, solubility, activity, and pattern of crystallization of proteins expressed in bottles were comparable to those obtained under conventional culture conditions. After use, the bottles are discarded, reducing the risk of cross-contamination of subsequent cultures. The approach appears to be suitable for high-throughput production of proteins for structural or functional studies.

Bacterial Proteins↗

PubMed2003

Transformation of fatty acids catalyzed by cytochrome P450 monooxygenase enzymes of Candida tropicalis.

Candida tropicalis ATCC 20336 can grow on fatty acids or alkanes as its sole source of carbon and energy, but strains blocked in beta-oxidation convert these substrates to long-chain alpha,omega-dicarboxylic acids (diacids), compounds of potential commercial value (Picataggio et al., Biotechnology 10:894-898, 1992). The initial step in the formation of these diacids, which is thought to be rate limiting, is omega-hydroxylation by a cytochrome P450 (CYP) monooxygenase. C. tropicalis ATCC 20336 contains a family of CYP genes, and when ATCC 20336 or its derivatives are exposed to oleic acid (C(18:1)), two cytochrome P450s, CYP52A13 and CYP52A17, are consistently strongly induced (Craft et al., this issue). To determine the relative activity of each of these enzymes and their contribution to diacid formation, both cytochrome P450s were expressed separately in insect cells in conjunction with the C. tropicalis cytochrome P450 reductase (NCP). Microsomes prepared from these cells were analyzed for their ability to oxidize fatty acids. CYP52A13 preferentially oxidized oleic acid and other unsaturated acids to omega-hydroxy acids. CYP52A17 also oxidized oleic acid efficiently but converted shorter, saturated fatty acids such as myristic acid (C(14:0)) much more effectively. Both enzymes, in particular CYP52A17, also oxidized omega-hydroxy fatty acids, ultimately generating the alpha,omega-diacid. Consideration of these different specificities and selectivities will help determine which enzymes to amplify in strains blocked for beta-oxidation to enhance the production of dicarboxylic acids. The activity spectrum also identified other potential oxidation targets for commercial development.

Amino Acid Sequence↗

PubMed2002

High throughput methods for gene cloning and expression.

We outline a high throughput process for the production of bacterial expression clones using automated liquid handlers. The protocol consists of a series of interlinked methods representing liquid manipulations or incubations on various stations of the automation system. The methods employ the ligation-independent cloning approach that enables the simultaneous production of plasmids for different expression systems. The current cloning protocol spans 3 days with a linear throughput of 400 targets per production run. This automated approach enables the production of large numbers of bacterial expression clones and ultimately purified proteins. Although they were developed for structural genomics, these molecular protocols can also be applied in high throughput strategies such as those used for site-specific mutagenesis or protein interaction studies.

Automation↗

PubMed2002

A new vector for high-throughput, ligation-independent cloning encoding a tobacco etch virus protease cleavage site.

To establish high-throughput methods for protein crystallography, all aspects of the production and analysis of protein crystals must be accelerated. Automated, plate-based methods for cloning, expression, and evaluation of target proteins will help researchers investigate the vast numbers of proteins now available from sequenced genomes. Ligation-independent cloning (LIC) is well suited to robotic cloning and expression, but few LIC vectors are available commercially. We have developed a new LIC vector, pMCSG7, that incorporates the tobacco etch virus (TEV) protease cleavage site into the leader sequence. This protease is highly specific and functions under a wide range of conditions. The new vector incorporates an N-terminal his-tag followed by the TEV protease recognition site and a SspI restriction site used for LIC. The vector functioned as expected, giving high cloning efficiencies and strong expression of proteins. Purification and cleavage of a target protein showed that the his-tag and the TEV cleavage site function properly. The protein was purified and cleaved under different conditions to simulate both plate-based screening methods and large-scale purifications for crystal production. The vector also includes a pair of adjacent, unique restriction sites that will allow insertion of additional modules between the his-tag and the cleavage site of the leader sequence to generate a family of vectors suitable for high-throughput production of proteins.

Amino Acid Sequence↗