PubMed Health⌕ Search

Biomedical subjects

Markus Antonietti

Publications and source records attributed to Markus Antonietti.

At least 19 recordsLinked to original sources
PubMed2007

Crystallization of indium tin oxide nanoparticles: from cooperative behavior to individuality.

The crystallization pathway of indium tin oxide nanoparticles during solvothermal synthesis in benzyl alcohol was investigated. The synthesis was stopped after different reaction times in the range of 1-24 h, and the structural and morphological characteristics of the products were analyzed by powder X-ray diffraction, electron microscopy, and UV/Vis spectroscopy. Interestingly, the crystallization mechanism does not proceed along a simple nucleation and growth pathway, but involves a two-step process. In the first 12 h an intermediate phase is formed, which consists of nanocrystallites 3-6 nm in size stabilized by an organic matrix. In this organic-inorganic network the nanoparticles are aligned into superstructures, but without any crystallographic orientation. After 12 h the intermediate phase is abruptly transformed into indium tin oxide nanoparticles with the bixbyite structure and with crystallite sizes of about 10-12 nm. This step is accompanied by the disappearance of the organic phase and the loss of the superstructure.

Colloids↗
PubMed2006

Silica nanocasting of lyotropic surfactant phases and organized organic matter: material science or an analytical tool?

The synthesis of porous inorganic films and materials by templating organized organic matter with nanosized structural elements is an actual field in the cross-section of inorganic chemistry, materials chemistry and surfactant science. This discussion article will review recent experiments in this area on a variety of systems and try to evaluate the outcome of both material applications and the basic understanding of self-assembly processes of organic self-organization.

Journal Article↗
PubMed2006

Calcite mesocrystals: "morphing" crystals by a polyelectrolyte.

Crystallization of calcite from different concentrated calcium chloride solutions by the CO(2) vapor diffusion technique in the presence of polystyrenesulfonate (PSS) yields defined assemblies of nanoparticles with unusual morphology. From the typical calcite rhombohedra, the morphology can be systematically varied via rounded edges and truncated triangles to concavely bent lens-like shapes. Although these "crystals" are apparently well facetted as observed in light microscopy, electron microscopy analysis and BET isotherms reveal that the structures are highly porous and are composed of almost perfectly three-dimensionally aligned calcite nanocrystals, scaffolded to the final, partly curved structures. The formation of all mesostructures is discussed within the framework of a polymer-mediated structure-formation process, in which the polymer is acting in four different ways. The present model case also provides evidence for the importance of nonclassical mesoscopic processes in polymer-controlled crystallization in general.

Journal Article↗
PubMed2006

The microwave absorption of emulsions containing aqueous micro- and nanodroplets: a means to optimize microwave heating.

The microwave absorption at frequencies between 10 MHz and 4 GHz is measured for aqueous brine droplets dispersed in a dielectric medium (epsilon(')=2.0). By varying the size of the droplets, ion type and ion concentration, it is found that the microwave absorption goes through a maximum which depends on the type of ions and their concentration. The absorption process is attributed to the polarization of the microdroplets through surface charges. Means to optimize microwave heating in emulsions is discussed.

Electric Capacitance↗
PubMed2006

Morphosynthesis of alanine mesocrystals by pH control.

Crystallization of DL-alanine is studied as a single polymorph model case to analyze the different modes of crystallization of polar organic molecules in absence of any structure directing additives. Depending on supersaturation, which is controlled either by temperature or by pH, and in the absence of additives, crystallization by mesoscale assembly of nanoparticles is found over a wide range of conditions, leading to so-called mesocrystals. This supplements the classical molecule-based crystallization mechanism, which is identified at lower supersaturations and at pH values away from the isoelectric point (IEP). The resulting alanine crystals are characterized by SEM, XRD, and single-crystal analysis. Time-resolved conductivity measurements and dynamic light scattering of the reaction solutions reveal information about precursor structures and reaction kinetics. A formation mechanism is proposed for the alanine mesocrystals.

Journal Article↗
PubMed2006

Synthesis and characterization of SiC materials with hierarchical porosity obtained by replication techniques.

Porous silicon carbide monoliths were obtained using the infiltration of preformed SiO(2) frameworks with appropriate carbon precursors such as mesophase pitch. The initial SiO(2) monoliths possessed a hierarchical pore system, composed of an interpenetrating bicontinuous macropore structure and 13 nm mesopores confined in the macropore walls. After carbonization, further heat treatment at ca. 1,400 degrees C resulted in the formation of a SiC-SiO(2) composite, which was converted into a porous SiC monolith by post-treatment with ammonium fluoride solution. The resulting porous SiC featured high crystallinity, high chemical purity and showed a surface area of 280 m(2) g(-1) and a pore volume of 0.8 ml g(-1).

Carbon Compounds, Inorganic↗
PubMed2006

Polymer-controlled crystallization of zinc oxide hexagonal nanorings and disks.

In this study, we have developed a novel route to the synthesis of ZnO nanorings, disks, and diskoidlike crystals on a large scale by a facile solution-based method by using polymers as crystal growth modifiers. The crystals precipitated with polyacrylamide (PAM) as the additive show ringlike morphology. A possible growth mechanism of the ZnO nanostructures based on typical polymer-crystals interactions in a mild aqueous solution is given. The polymer contains in the side chain a large number of amide ligands that are able to coordinate with Zn(2+) ions, that is, the otherwise just weakly exposed (001) face, leading to a lowering of surface energy and inhibition of growth along this direction and the formation of ringlike morphologies. While in the presence of carboxyl-functionalized polyacrylamide (PAM-COOH), nearly monodispersed disklike crystals were observed and finally evolved into diskoidlike microstructures with the reaction time prolonged. Polymer-directed crystal growth and mediated self-assembly of nanocrystals may provide promising routes to rational synthesis of various ordered inorganic and inorganic-organic hybrid materials with complex form and structural specialization.

Journal Article↗
PubMed2006

Highly crystalline WO3 thin films with ordered 3D mesoporosity and improved electrochromic performance.

WO3 thin layers with nanometer-scale periodicity were prepared by evaporation-induced self-assembly (EISA) using a novel amphiphilic block-copolymer template (poly(ethylene-co-butylene)-block-poly(ethylene oxide)). The evolution of the mesoporous ordered network and the crystallinity of the framework were monitored by 2D-SAXS, WAXS, SEM, XPS, and porosimetry. By annealing the films, the pore-wall crystallinity is adjusted between fully amorphous and highly crystalline without mesostructural degradation. Thus, the crystalline-film framework is composed of phase-pure monoclinic WO3 nanoparticles (12-14 nm in size). Furthermore, heat treatment transforms the originally spherical mesopores into ellipsoids, resulting in a unidirectionally shrunken, but still well-defined and fully accessible bcc mesopore architecture. The influence of mesoporosity and crystallinity on electrochemical/electrochromic characteristics was addressed by monitoring electrochemical features and the absorption changes during Li insertion/extraction (repetitive potentiostatic cycling). Both the amorphous and crystalline mesoporous films possess electrochromic response times on the order of only seconds, which are attributable to the facilitated insertion of guest ions due to shortening of the diffusion path lengths. Also, the insertion/extraction reversibility of crystalline WO3 layers with 3D mesoporosity is improved compared to amorphous ones and reaches values close to 100%.

Crystallization↗
PubMed2006

Solid-phase supported polymer synthesis of sequence-defined, multifunctional poly(amidoamines).

A novel synthesis route toward multifunctional, sequence-defined polyamides is described. A fully automated, solid-phase supported polymer synthesis was developed and utilized to obtain linear poly(amidoamine) segments (PAAs) that exhibit the absence of molecular weight and chemical distribution. This was achieved by an alternating assembly of diacids and diamines, using a forced step-growth mechanism, and driving each coupling step to completion. Within the monodisperse PAA segment, functionalities can be precisely positioned along the polymer chain allowing local control of the chain properties. The versatility of the approach was demonstrated by the conjugation of the monodisperse PAA segment toward an oligopeptide, leading to a single component block copolymer as verified by mass spectrometry. Moreover, two different poly(ethylene oxide)-PAA conjugates were synthesized utilizing the direct, solid-phase supported route. By varying the PAA repeat unit, the cationic nature of the PAA segment was adjusted, demonstrating the potential of the approach. The products were characterized by means of 1H NMR and matrix-assisted laser desorption mass spectrometry (MALDI-TOF-MS) methods, which confirmed the chemical structures conclusively.

Cations↗
PubMed2005

Growth and assembly of crystalline tungsten oxide nanostructures assisted by bioligation.

Here, we present a systematic study on the influence of the bioligand deferoxamine mesylate on the crystallization and assembly behavior of tungsten oxide in a soft-chemistry process. Without deferoxamine mesylate, this approach yields pseudo-single crystalline tungstite nanoplatelets consisting of a large number of crystallographically almost perfectly aligned primary crystallites. In the presence of a constant amount of deferoxamine, the particle morphology drastically changes with temperature, ranging from wormlike organic-inorganic hybrid nanostructures to single-crystalline tungsten oxide nanowires, highlighting the role of the bioligand in controlling the crystal growth and assembly behavior. The nanowires have a uniform diameter of about 1.3 nm, an aspect ratio of more than 500, and the structural flexibility of tungsten oxide. The presented process is based on the combination of biomimetic construction principles with nonaqueous sol-gel chemistry, thus combining the advantages of both tools, excellent control over particle morphology and high crystallinity at low temperature.

Journal Article↗
PubMed2005

Mesocrystals: inorganic superstructures made by highly parallel crystallization and controlled alignment.

Controlled self-organization of nanoparticles can lead to new materials. The colloidal crystallization of non-spherical nanocrystals is a reaction channel in many crystallization reactions. With additives, self-organization can be stopped at an intermediary step-a mesocrystal-in which the primary units can still be identified. Mesocrystals were observed for various systems as kinetically metastable species or as intermediates in a crystallization reaction leading to single crystals with typical defects and inclusions. The control forces and mechanism of mesocrystal formation are largely unknown, but several mesocrystal properties are known. Mesocrystals are exiting examples of nonclassical crystallization, which does not proceed through ion-by-ion attachment, but by a modular nanobuilding-block route. This path makes crystallization more independent of ion products or molecular solubility, it occurs without pH or osmotic pressure changes, and opens new strategies for crystal morphogenesis.

Journal Article↗
PubMed2005

Amorphous layer around aragonite platelets in nacre.

We reveal that the aragonite CaCO3 platelets in nacre of Haliotis laevigata are covered with a continuous layer of disordered amorphous CaCO3 and that there is no protein interaction with this layer. This finding contradicts classical paradigms of biomineralization, e.g., an epitaxial match between the structural organic matrix and the formed mineral. This finding also highlights the role of physicochemical effects in morphogenesis, complementing the previously assumed total control by biomolecules and bioprocesses, with many implications in nanotechnology and materials science.

Animals↗