PubMed Health⌕ Search

Biomedical subjects

Martin F Jarrold

Publications and source records attributed to Martin F Jarrold.

At least 19 recordsLinked to original sources

Melting, premelting, and structural transitions in size-selected aluminum clusters with around 55 atoms.

Heat capacities have been determined for unsupported aluminum clusters, Al49(+) - Al63(+), from 150 to 1050 K. Peaks in the heat capacities due to melting occur between 450 and 650 K (well below the bulk melting point of 933 K). The peaks for Al+51 and Al+52 are bimodal, suggesting the presence of a premelting transition where the surface of the clusters melts around 100 K before the core. For clusters with n > 55 the melting temperatures suddenly drop, and there is a dip in the heat capacities due to a transition between two solid forms before the clusters melt.

Journal Article↗

Entropic stabilization of isolated beta-sheets.

Temperature-dependent electric deflection measurements have been performed for a series of unsolvated alanine-based peptides (Ac-WA(n)-NH(2), where Ac = acetyl, W = tryptophan, A = alanine, and n = 3, 5, 10, 13, and 15). The measurements are interpreted using Monte Carlo simulations performed with a parallel tempering algorithm. Despite alanine's high helix propensity in solution, the results suggest that unsolvated Ac-WA(n)-NH(2) peptides with n > 10 adopt beta-sheet conformations at room temperature. Previous studies have shown that protonated alanine-based peptides adopt helical or globular conformations in the gas phase, depending on the location of the charge. Thus, the charge more than anything else controls the structure.

Alanine↗

The mobile proton in polyalanine peptides.

Ion mobility measurements have been performed for protonated polyalanine peptides (A10 + H+, A15 + H+, A20 + H+, A25 + H+, and A15NH2 + H+) as a function of temperature using a new high-temperature drift tube. Peaks due to helices and globules were found at room temperature for all peptides, except for A10 + H+ (where only the globule is present). As the temperature is increased, the helix and globule peaks broaden and merge to give a single narrow peak. This indicates that the two conformations interconvert rapidly at elevated temperatures. The positions of the merged peaks show that A15 + H+ and A15NH2 + H+ spend most of their time as globules when heated, while A20 + H+ and A25 + H+ spend most of their time as helices. The helix/globule transitions are almost certainly accompanied by intramolecular proton transfer, and so, these results suggest that the proton becomes mobile (able to migrate freely along the backbone) at around 450 K. The peptides dissociate as the temperature is increased further to give predominantly the bn(+), b(n-1)(+), b(n-2)(+), ... series of fragment ions. There is a correlation between the ease of fragmentation and the time spent in the helical conformation for the An + H+ peptides. Helix formation promotes dissociation because it pools the proton at the C-terminus where it is required for dissociation to give the observed products. In addition to the helix and globule, an antiparallel helical dimer is observed for the larger peptides. The dimer can be collisionally dissociated by injection into the drift tube at elevated kinetic energies.

Alanine↗

Melting, freezing, sublimation, and phase coexistence in sodium chloride nanocrystals.

Calorimetry measurements, performed by multicollision induced dissociation, have been used to probe the melting of a number of (NaCl)nNa+ clusters with n=22-37. The clusters anneal at 225-325 K and melt at 750-850 K. (NaCl)22Na+ and (NaCl)37Na+, which can adopt geometries that are perfect fragments of the bulk lattice melt at around 850 K. The other clusters, which (except for n=31) must have defects, melt at temperatures which are up to 100 K lower than the perfect nanocrystals. The internal energy distributions become bimodal near the melting temperature. This is the signature of slow dynamic phase coexistence where clusters spontaneously jump back and forth between the solid and liquid states with an average period that is longer than required for thermal equilibration. The jump frequency must be between 10(4) and 10(7) s(-1) for the bimodal distribution to be observable in our experiments. The (NaCl)nNa+ clusters can dissociate by an unusual thermally activated process where melting and freezing raise the internal energy to generate hot solid clusters that can sublime before they cool to the ambient temperature.

Journal Article↗

Gallium cluster "magic melters".

Calorimetry measurements (using a method based on multicollision induced dissociation) have been performed for unsupported gallium clusters, Gan+ (n = 30-50 and 55). Melting transitions have been identified from spikes in the heat capacities recorded as a function of temperature. There are enormous fluctuations in the melting temperatures and the heats of fusion with cluster size. Clusters with n = 31, 33, 37, and 45-47 are "magic melters" with particularly well-defined melting transitions. There is a strong correlation between the heats of fusion, entropies of fusion, and the stabilities of the clusters. However, these quantities are not strongly correlated with the melting temperatures.

Journal Article↗

Water molecule adsorption on short alanine peptides: how short is the shortest gas-phase alanine-based helix?

Water adsorption measurements have been performed under equilibrium conditions for unsolvated Ac-A(n)K+H(+) and Ac-KA(n)+H(+) peptides with n = 4 - 10. Previous work on larger alanine peptides has shown that two dominant conformations (helices and globules) are present for these peptides and that water adsorbs much more strongly to the globules than to the helices. All the Ac-KA(n)+H(+) peptides studied here (which are expected to be globular) adsorb water strongly, and so do the Ac-A(n)K+H(+) peptides with n < 8. However, for Ac-A(n)K+H(+) with n = 8-10 there is a substantial drop in the propensity to adsorb water. This result suggests that Ac-A(8)K+H(+) is the smallest Ac-A(n)K+H(+) peptide to have a significant helical content in the gas phase. Water adsorption measurements for Ac-V(n)K+H(+) and Ac-L(n)K+H(+) with n = 5-10 suggest that the helix emerges at n = 8 for these peptides as well.

Adsorption↗

Extreme stability of an unsolvated alpha-helix.

High-temperature ion mobility measurements have been performed for alpha-helical Ac-A15K+H+ and globular Ac-KA15+H+ peptides. The alpha-helical and globular conformations do not melt into random coils as the temperature is raised. Instead, both conformations survive to the point where the peptide signals vanishes due to fragmentation. This occurs at 600 K for the globular Ac-KA15+H+ peptide and at 725 K for the alpha-helical Ac-A15K+H+. For the helical Ac-A15K+H+ peptide it appears that fragmentation is triggered by disruption of the helical conformation.

Alanine↗

Application of evolutionary algorithm methods to polypeptide folding: comparison with experimental results for unsolvated Ac-(Ala-Gly-Gly)5-LysH+.

We present an evolutionary method for finding the low-energy conformations of polypeptides. The application, called FOLDAWAY,is based on a generic framework and uses several evolutionary operators as well as local optimization to navigate the complex energy landscape of polypeptides. It maintains two complementary representations of the structures and uses the CHARMM force field for evaluating the energies. The method is applied to unsolvated Met-enkephalin and Ac-(Ala-Gly-Gly)(5)-Lys(+)H(+). Unsolvated Ac-(Ala-Gly-Gly)(5)-Lys(+)H(+) has been the object of recent experimental studies using ion mobility measurements. It has a flat energy landscape where helical and globular conformations have similar energies. FOLDAWAY locates several large groups of structures not found in previous molecular dynamics simulations for this peptide, including compact globular conformations, which are probably present in the experiments. However, the relative energies of the different conformations found by FOLDAWAY do not accurately match the relative energies expected from the experimental observations.

Algorithms↗

Pi-helix preference in unsolvated peptides.

Ion mobility measurements have been used to examine helix formations in the gas phase for a series of alanine/glycine-based peptides that incorporate a glutamic acid (E) and lysine (K) at various positions along the backbone. Incorporation of an EK pair lowers the percent helix for all positions (presumably because hydrogen bonding between the backbone and the E and K side chains stabilize the nonhelical globular conformations). The largest percent helix is found when the EK pair is in an i,i+5 arrangement, which suggests that the preferred helical conformation for these peptides is a pi-helix. This conclusion is supported by comparison of cross sections deduced from the ion-mobility measurements to average cross sections calculated for conformations obtained from molecular dynamics simulations. The glutamic acid and lysine may form an ion pair that is stabilized by interactions with the helix macro-dipole.

Alanine↗

Water molecule adsorption on protonated dipeptides.

Equilibrium constants for the adsorption of the first water molecule on six protonated dipeptides (Gly-Gly+H(+), Gly-Ala+H(+), Ala-Gly+H(+), Ala-Ala+H(+), Pro-Gly+H(+), and Gly-Trp+H(+)) have been measured as a function of temperature, and DeltaH(o) and DeltaS(o) determined. Density functional theory calculations were performed for both the unsolvated peptides and the peptide water complexes at the B3LYP/6-311++G level. MP2/6-311++G** calculations were also carried out for Gly/Ala peptides. The calculations suggest that adsorption of a water molecule by these simple dipeptides is a complex process, both the unsolvated peptide and the peptide-water complexes have multiple conformations with similar free energies. Average DeltaH(o) and DeltaS(o) values derived from the calculations are in reasonable agreement with the experimental results. According to the calculations, the dominant water adsorption process involves a significant conformational change to accommodate a bridging water molecule. DeltaH(o) is diminished for Pro-Gly+H(+) mainly because the water interacts with a secondary amine, whereas for Gly-Trp+H(+), DeltaH(o) is significantly decreased by the loss of cation-pi interactions upon water adsorption. For unsolvated peptides the proton affinities of the N-terminus and the backbone carbonyl groups are known to be similar. Addition of a single water molecule causes a significant stabilization of the N-terminus protonation site.

Adsorption↗

All-atom generalized-ensemble simulations of small proteins.

We give an overview of some generalized-ensemble techniques that have proven successful in all-atom simulations of proteins. We show that these techniques enable efficient investigations of secondary structure formation and folding in peptides and small proteins. Results are presented for various alanine-based artificial peptides and a small protein, the 36-residued villin headpiece subdomain (HP-36). Our results indicate that all-atom simulations of proteins may be more restricted by the accuracy of the present energy functions than by the efficiency of the search algorithms.

Computer Simulation↗

Hot and solid gallium clusters: too small to melt.

A novel multicollision induced dissociation scheme is employed to determine the energy content for mass-selected gallium cluster ions as a function of their temperature. Measurements were performed for Ga(+)(n) (n=17 39, and 40) over a 90-720 K temperature range. For Ga+39 and Ga+40 a broad maximum in the heat capacity-a signature of a melting transition for a small cluster-occurs at around 550 K. Thus small gallium clusters melt at substantially above the 302.9 K melting point of bulk gallium, in conflict with expectations that they will remain liquid to below 150 K. No melting transition is observed for Ga+17.

Journal Article↗

Application of molecular beam deflection time-of-flight mass spectrometry to peptide analysis.

The application of molecular beam deflection time-of-flight mass spectrometry (MBD-TOFMS) to peptide identification is described. The technique permits a simultaneous measurement of molecular mass and electric dipole susceptibility. The mass and susceptibility are not strongly correlated, and the results can be presented as a two-dimensional map. The susceptibility provides a useful way to disperse isobaric and isomeric peptides, and at least for small peptides, the susceptibility is significantly different for different amino acid sequences. Results for peptides in the mass range 1000-2300 Da show that the mass and susceptibility lead to a higher identification score than mass spectra alone.

Algorithms↗

Probing helix formation in unsolvated peptides.

Ion mobility measurements have been used to examine helix formation in unsolvated glycine-based peptides containing three alanine residues. Nine sequence isomers of Ac-[12G3A]K+H(+) were studied (Ac = acetyl, G = glycine, A = alanine, and K = lysine). The amount of helix present for each peptide was examined using two metrics, and it is strongly dependent on the proximity and the location of the alanine residues. Peptides with three adjacent alanines have the highest helix abundances, and those with well-separated alanines have the lowest. The helix abundances for most of the peptides can be fit reasonably well using a modified Lifson-Roig theory. However, Lifson-Roig theory fails to account for several key features of the experimental results. The most likely explanation for the correlation between helix abundances and the number of adjacent alanines is that neighboring alanines promote helix nucleation.

Alanine↗

Direct probing of zwitterion formation in unsolvated peptides.

Molecular beam electric deflection measurements have been used to determine electric susceptibilities for small unsolvated alanine-based peptides. The electric susceptibility provides information about the charge distribution within the peptide and can be used to distinguish between zwitterionic and canonical forms. Measured electric susceptibilities for WAn peptides (n = 1-5) are similar to those for capped Ac-WAn-NH2 peptides (which cannot form zwitterions). Susceptibilities calculated using a simulated tempering-based approach are substantially larger for the zwitterionic form than for the canonical form. The measured susceptibilities are in good agreement with those calculated for the canonical form. For the larger peptides, the lowest potential energy structure found in the simulations is hairpin-like, while the lowest free energy structure found at room temperature is extended. The zwitterionic form is constrained by intramolecular interactions which make it entropically unfavorable.

Alanine↗

Helix-turn-helix motifs in unsolvated peptides.

The conformations of unsolvated Ac-A14KG3A14K + 2H+ (Ac = acetyl, A = alanine, K = lysine, G = glycine) have been examined by ion mobility measurements and molecular dynamics simulations. This peptide was designed as a model helix-turn-helix motif. It was found to adopt three distinct geometries which were assigned to an extended helical conformation which is only stable at low temperatures (<230 K), a relatively high energy but metastable structure with exchanged lysines, and a coiled-coil. The coiled coil (which consists of an antiparallel arrangement of two helical alanine sections linked by a flexible glycine loop) is the dominant conformation. For temperatures >350 K, the experimental results indicate the helices uncouple and the loop randomizes. From equilibrium constants determined for this helix coupling right arrow over left arrow uncoupling transition, we found DeltaH degrees = -45 kJ mol-1 and DeltaS degrees = 114 J K-1 mol-1. -DeltaH degrees is essentially the enthalpy change for docking the two helices together while DeltaS degrees is essentially the entropy change for freeing up the glycine loop.

Glycine↗

The energy landscape of unsolvated peptides: the role of context in the stability of alanine/glycine helices.

Ion mobility measurements have been used to examine the conformations present for unsolvated Ac-(AG)(7)A+H(+) and (AG)(7)A+H(+) peptides (Ac = acetyl, A = alanine, and G = glycine) over a broad temperature range (100-410 K). The results are compared to those recently reported for Ac-A(4)G(7)A(4)+H(+) and A(4)G(7)A(4)+H(+), which have the same compositions but different sequences. Ac-(AG)(7)A+H(+) shows less conformational diversity than Ac-A(4)G(7)A(4)+H(+); it is much less helical than Ac-A(4)G(7)A(4)+H(+) at the upper end of the temperature range studied, and at low temperatures, one of the two Ac-A(4)G(7)A(4)+H(+) features assigned to helical conformations is missing for Ac-(AG)(7)A+H(+). Molecular dynamics simulations suggest that the different conformational preferences are not due to differences in the stabilities of the helical states, but differences in the nonhelical states: it appears that Ac-(AG)(7)A+H(+) is more flexible and able to adopt lower energy globular conformations (compact random looking three-dimensional structures) than Ac-A(4)G(7)A(4)+H(+). The helix to globule transition that occurs for Ac-(AG)(7)A+H(+) at around 250-350 K is not a direct (two-state) process, but a creeping transition that takes place through at least one and probably several intermediates.

Alanine↗

The initial steps in the hydration of unsolvated peptides: water molecule adsorption on alanine-based helices and globules.

Equilibrium constants for the adsorption of the first water molecule onto a variety of unsolvated alanine-based peptides have been measured and Delta H degrees and DeltaS degrees have been determined. The studies were designed to examine the effects of conformation, charge, and composition on the propensity for peptides to bind water. In general, water adsorption occurs significantly more readily on the globular peptides than on helical ones: several of the singly charged helical peptides were not observed to adsorb a water molecule even at -50 degrees C. These results place a limit on the free energy change for interaction between a water molecule and the helical peptide group. Molecular dynamics simulations reproduce most of the main features of the results. The ability to establish a network of hydrogen bonds to several different hydrogen-bonding partners emerges as a critical factor for strong binding of the water molecule. Whether the charge site is involved in water adsorption depends on how well it is shielded. Peptides containing a protonated histidine bind water much more strongly that those containing a protonated lysine because the delocalized charge on histidine is difficult to shield. The entropy change for adsorption of the first water molecule is correlated with the enthalpy change.

Adsorption↗