PubMed Health⌕ Search

Biomedical subjects

Martin P Verbeet

Publications and source records attributed to Martin P Verbeet.

5 recordsLinked to original sources

A random-sequential mechanism for nitrite binding and active site reduction in copper-containing nitrite reductase.

The homotrimeric copper-containing nitrite reductase (NiR) contains one type-1 and one type-2 copper center per monomer. Electrons enter through the type-1 site and are shuttled to the type-2 site where nitrite is reduced to nitric oxide. To investigate the catalytic mechanism of NiR the effects of pH and nitrite on the turnover rate in the presence of three different electron donors at saturating concentrations were measured. The activity of NiR was also measured electrochemically by exploiting direct electron transfer to the enzyme immobilized on a graphite rotating disk electrode. In all cases, the steady-state kinetics fitted excellently to a random-sequential mechanism in which electron transfer from the type-1 to the type-2 site is rate-limiting. At low [NO(-)(2)] reduction of the type-2 site precedes nitrite binding, at high [NO(-)(2)] the reverse occurs. Below pH 6.5, the catalytic activity diminished at higher nitrite concentrations, in agreement with electron transfer being slower to the nitrite-bound type-2 site than to the water-bound type-2 site. Above pH 6.5, substrate activation is observed, in agreement with electron transfer to the nitrite-bound type-2 site being faster than electron transfer to the hydroxyl-bound type-2 site. To study the effect of slower electron transfer between the type-1 and type-2 site, NiR M150T was used. It has a type-1 site with a 125-mV higher midpoint potential and a 0.3-eV higher reorganization energy leading to an approximately 50-fold slower intramolecular electron transfer to the type-2 site. The results confirm that NiR employs a random-sequential mechanism.

Alcaligenes faecalis↗

The substrate-bound type 2 copper site of nitrite reductase: the nitrogen hyperfine coupling of nitrite revealed by pulsed EPR.

A pulsed electron paramagnetic resonance study has been performed on the type 2 copper site of nitrite reductase (NiR) from Alcaligenes faecalis. The H145A mutant, in which histidine 145 is replaced by alanine, was studied by ESEEM and HYSCORE experiments at 9 GHz on frozen solutions. This mutant contains a reduced type 1 copper site which allowed a selective investigation of the type 2 site of H145A and of its nitrite-bound form H145A (NO2(-)). The experiments yielded hyperfine and quadrupole parameters of the remote nitrogens of two of the histidines in the type 2 copper site of the protein and revealed the changes of these values induced by substrate binding (14NO2(-) and 15NO2(-)). The HYSCORE experiments displayed a signal of 15NO2(-) bound to H145A, from which hyperfine parameters of the nitrite nitrogen were estimated. The small isotropic hyperfine coupling, 0.36 MHz, of the nitrite nitrogen (14N) suggests that the substrate binds in an axial position to the copper in the type 2 site and that the molecular orbital containing the unpaired electron extends onto the substrate. This and other changes in the EPR parameters occurring after nitrite binding suggest a change in electronic structure of the site, which most likely prepares the site for the catalytic reaction. We propose that this change is essential for the reaction to occur.

Alcaligenes faecalis↗

Sensing nitrite through a pseudoazurin-nitrite reductase electron transfer relay.

Nitrite is converted to nitric oxide by haem or copper-containing enzymes in denitrifying bacteria during the process of denitrification. In designing an efficient biosensor, this enzymic turnover must be quantitatively assessed. The enzyme nitrite reductase from Alcaligenes faecalis contains a redox-active blue copper centre and a nonblue enzyme-active copper centre. It can be covalently tethered to modified gold-electrode surfaces in configurations in which direct electron transfer is possible. A surface cysteine mutant of the enzyme can be similarly immobilised on bare electroactive gold substrates. Under such circumstances, however, electron transfer cannot be effectively coupled with substrate catalytic turnover. In using either the natural redox partner, pseudoazurin, or ruthenium hexammine as an "electron-shuttle" or "conduit" between enzyme and a peptide-modified electrode surface, the coupling of electron transfer to catalysis can be utilised in the development of an amperometric nitrite sensor.

Azurin↗

Enzyme therapy for Pompe disease: from science to industrial enterprise.

UNLABELLED: Pompe disease or glycogen storage disease type II (OMIM 232300) is a metabolic myopathy with a broad clinical spectrum. Generalised muscle weakness combined with cardiomegaly presents within the first 3 months after birth, if the lysosomal alpha-glucosidase (AGLU) deficiency is complete. Residual enzyme activity prevents cardiac involvement and delays onset of muscle weakness. Enzyme therapy, by intravenous administration of acid AGLU, aims to supplement the missing enzyme activity. At the SHS symposium on Glycogen Storage Diseases Type I and II, in Fulda, two interim accounts were given of studies on the efficacy of enzyme therapy for Pompe disease; one with recombinant human acid AGLU produced in Chinese hamster ovary cells and the other with the same enzyme produced in the milk of transgenic rabbits. CONCLUSION: this review focuses on the latter study, discusses the scientific, technological and commercial aspects of the enterprise, and addresses the prospects and challenges of enzyme therapy for Pompe disease.

Animals↗

A model for the thermal unfolding of amicyanin.

In the present study the thermal unfolding of amicyanin has been addressed using differential scanning calorimetry, fluorescence emission, optical density, circular dichroism and electron paramagnetic resonance. The combined use of these techniques has allowed us to assess, during unfolding of the protein, its global conformational changes in relationship to the local structural modifications occurring in the copper environment and close to the fluorescent chromophore Trp46 of the protein. The thermal transition from the native to the denatured state is on the whole irreversible and occurs in the temperature range between 65 and 72 degrees C, depending on the scan rate and technique used. Amicyanin as a whole shows a complex unfolding pathway, which has been described in terms of a three-step model: N <--> U --> F1 --> F2. According to this model, in the first step the native state of the protein (N) goes reversibly to the unfolded state (U), in the second one U goes irreversibly to F1 and, finally, the state F2 is irreversibly reached in the third step. Kinetic factors prevent the experimental separation of these steps. Nevertheless, the comparison of the data obtained with the different experimental techniques testifies the presence, within the unfolding pathway, of some intermediate states, although not sufficiently long-lived to allow a detailed characterization. A first intermediate transient state has been identified around 68 degrees C, whereas a second one can be related to conformational changes that involve the copper environment. Finally, an exothermal phenomenon, caused by irreversible rearrangements of the melted polypeptide chains, is evidenced. In addition, according to the EPR findings, the type 1 copper ion, which is four-fold coordinated by two N and two S atoms in a distorted tetrahedron in the native state of the protein, shows type 2 features after denaturation. A mathematical model simulating the unfolding Cp(exc) profile has been also developed.

Bacterial Proteins↗