PubMed Health⌕ Search

Biomedical subjects

Mary F Mahon

Publications and source records attributed to Mary F Mahon.

At least 37 records · Page 2Linked to original sources
PubMed2004

Synthesis, characterisation and optical spectroscopy of platinum(II) di-ynes and poly-ynes incorporating condensed aromatic spacers in the backbone.

A series of protected and terminal dialkynes with extended pi-conjugation through a condensed aromatic linker unit in the backbone, 1,4-bis(trimethylsilylethynyl)naphthalene, 1,4-bis(ethynyl)naphthalene, 9,10-bis(trimethylsilylethynyl)anthracene, 9,10-bis(ethynyl)anthracene, have been synthesized and characterized spectroscopically. The solid-state structures of and have been confirmed by single crystal X-ray diffraction studies. Reaction of two equivalents of the complex trans-[Ph(Et(3)P)(2)PtCl] with an equivalent of the terminal dialkynes 1,4-bis(ethynyl)benzene and, in (i)Pr(2)NH-CH(2)Cl(2), in the presence of CuI, at room temperature, afforded the platinum(II) di-ynes trans-[Ph(Et(3)P)(2)Pt-C[triple bond, length as m-dash]C-R-C[triple bond, length as m-dash]C-Pt(PEt(3))(2)Ph](R = benzene-1,4-diyl; naphthalene-1,4-diyl and anthracene-9,10-diyl ) while reactions between equimolar quantities of trans-[((n)Bu(3)P)(2)PtCl(2)] and under similar conditions readily afforded the platinum(II) poly-ynes trans-[-((n)Bu(3)P)(2)Pt-C[triple bond]C-R-C[triple bond]C-](n)(R = naphthalene-1,4-diyl and anthracene-9,10-diyl ). The Pt(II) diynes and poly-ynes have been characterized by analytical and spectroscopic methods, and the single crystal X-ray structures of and have been determined. These structures confirm the trans-square planar geometry at the platinum centres and the linear nature of the molecules. The di-ynes and poly-ynes are soluble in organic solvents and readily cast into thin films. Optical spectroscopic measurements reveal that the electron-rich naphthalene and anthracene spacers create strong donor-acceptor interactions between the Pt(II) centres and conjugated ligands along the rigid backbone of the organometallic polymers. Thermogravimetry shows that the di-ynes possess a somewhat higher thermal stability than the corresponding poly-ynes. Both the Pt(II) di-ynes and the poly-ynes exhibit increasing thermal stability along the series of spacers from phenylene through naphthalene to anthracene.

Journal Article↗
PubMed2004

[(iPr3P)6Rh6H12]2+: a high-hydride content octahedron that bridges the gap between late and early transition metal clusters.

Treatment of [(iPr3P)2Rh(nbd)][Y] {nbd = norbornadiene, Y = B{3,5-(CF3)2C6H3}4- [B(ArF)4] or 1-H-closo-CB11Me11-} with H2 (ca. 4 atm) results in the isolation, in moderate yield, of the octahedral cluster complex [(iPr3P)6Rh6H12][Y]2 1. The cluster (for both anions) has been characterized by NMR, mass spectroscopy, and X-ray crystallography. These show 1 to have 12 edge-bridging hydrogen atoms, and the structure bears more resemblance to clusters of the early transition metals with pi-donor ligands than those of the late transition metals with pi-acceptor ligands. Intermediate complexes on the route to 1, namely, the nonclassical dihydrogen complexes [(iPr3P)2Rh(H)2(eta2-H2)x][B(ArF)4] (x = 1 or 2), have been observed spectroscopically. The high hydride content of 1 makes it a possible model for nanocluster colloidal Rh(0) catalysts that are used in olefin and arene hydrogenation.

Journal Article↗
PubMed2004

Silver-phosphine complexes of the highly methylated carborane monoanion [closo-1-H-CB11Me11]-.

The synthesis of the silver(I) salt of the highly methylated carborane anion [closo-1-H-CB(11)Me(11)](-) is described, Ag[closo-1-H-CB(11)Me(11)] 1, which in the solid state shows close intermolecular Ag...H(3)C contacts. Addition of various monodentate phosphines to 1 results in the formation of the complexes (R(3)P)Ag[closo-1-H-CB(11)Me(11)] [R = Ph, 2; cyclohexyl (C(6)H(11)), 3; (3,5-Me(2)-C(6)H(3)), 4]. All these complexes show close intermolecular Ag.H(3)C contacts in the solid state that are considerably shorter than the sum of the van der Waals radius of methyl (2.00 A) and the ionic radius of silver(I) (1.29 A). For 2 and 3 there are other close intermolecular Ag...H(3)C contacts in the solid state, arising from proximate carborane anions in the crystal lattice. Addition of methyl groups to the periphery of the phosphine ligand (complex 4) switches off the majority of these interactions, leaving essentially a single cage interacting with the cationic silver-phosphine fragment through three CH(3) groups. In solution (CD(2)Cl(2)) Ag...H(3)C contacts remain, as evidenced by both the downfield chemical shift change and the significant line-broadening observed for the cage methyl signals. These studies also show that the metal fragment is fluxional over the surface of the cage. The Ag...H(3)C interactions in solution may be switched off by addition of a stronger Lewis base than [closo-1-H-CB(11)Me(11)](-). Thus, addition of [NBu(4)][closo-1-H-CB(11)H(5)Br(6)] to 2 affords (Ph(3)P)Ag[closo-1-H-CB(11)H(5)Br(6)], while adding Et(2)O or PPh(3) affords the well-separated ion-pairs [(Ph(3)P)(L)Ag][closo-1-H-CB(11)Me(11)] (L = OEt(2) 5, PPh(3) 6,) both of which have been crystallographically characterized. DFT calculations on 2 (at the B3LYP/DZVP level) show small energy differences between the possible coordination isomers of this compound, with the favored geometry being one in which the [(Ph(3)P)Ag](+) fragment interacts with three of the [BCH(3)] vertices on the lower surface of the cage, similar to the experimentally observed structure of 4.

Journal Article↗
PubMed2004

The reaction of GeCl4 with primary and secondary phosphines.

Reaction of GeCl4 and CyPH2 leads to a range of products from which crystals of [CyPH3]+[GeCl3]- have been obtained. The major intermediate in this reaction, Cy(H)PGeCl3, can be obtained as the dominant product only when an excess of GeCl4 is used in the preparation. Similarly, crystals of [Ph2PH2]+[GeCl3]- have been obtained from reaction of Ph2PH and GeCl4(1 : 1). The structures of both primary and secondary phosphonium cations are reported. Aerosol-assisted and low-pressure chemical vapour deposition experiments using Cy(H)PGeCl3 as precursor lead to the deposition of thin films containing both germanium and phosphorus, contaminated with large amounts of oxygen. GeP has been identified as components of the film from bandgap measurements.

Chlorides↗
PubMed2004

Automated structure elucidation of two unexpected products in a reaction of an alpha,beta-unsaturated pyruvate.

The reaction between an alpha,beta-unsaturated pyruvate and ethyl diazoacetate (EDA) yielded two unexpected products. The structures of these products were determined by automated elucidation of the chemical structures using spectroscopic inputs of a series of 1D and 2D NMR data using the computer program ACD/Structure Elucidator, StrucEluc. The formation of these products is rationalised. Their structures were also confirmed by x-ray crystallography.

Acetates↗
PubMed2003

A definitive synthesis of D-myo-inositol 1,4,5,6-tetrakisphosphate and its enantiomer D-myo-inositol 3,4,5,6-tetrakisphosphate from a novel butane-2,3-diacetal-protected inositol.

New and rapid syntheses of the enantiomeric intracellular signalling molecules d-myo-inositol 1,4,5,6-tetrakisphosphate (1 a) and D-myo-inositol 3,4,5,6-tetrakisphosphate (1 b) are described. The synthetic strategy employs the novel butane-2,3-diacetal-protected (BDA-protected) myo-inositol (+/-)-3 ab, directly accessible from myo-inositol on a large scale, and an optical resolution with diastereoisomeric (R)-(-)-acetylmandelate esters. The X-ray crystal structure of (+/-)-4, an unusual side product of acid-catalysed reaction of myo-inositol with butanedione is also presented, and the absolute configurations of 1 a and 1 b are definitively assigned by conversion of key precursors into (+)-bornesitol and L-iditol hexaacetate, respectively. Biological activity of synthetic 1 b was confirmed in comparison with the natural polyphosphate.

Acetals↗
PubMed2003

Structure, reactivity, and computational studies of a novel ruthenium hydrogen sulfide dihydride complex.

Addition of 1 atm of H(2)S to [Ru(IMes)(2)(CO)(EtOH)H(2)] (IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene) affords the air-stable hydrogen sulfide dihydride complex, [Ru(IMes)(2)(CO)(H(2)S)H(2)] 2. Treatment of 2 with excess H(2)S leads to formation of the 16-electron bis-hydrosulfido complex, [Ru(IMes)(2)(CO)(SH)(2)] 3. Preliminary studies show that 3 reacts with both H(2) and CO in solution as well as in the solid state. Both 2 and 3 have been structurally characterized

Journal Article↗
PubMed2003

Diphosphines possessing electronically different donor groups: synthesis and coordination chemistry of the unsymmetrical Di(N-pyrrolyl)phosphino-functionalized dppm analogue Ph2PCH2P(NC4H4)2.

The unsymmetrical diphosphinomethane ligand Ph(2)PCH(2)P(NC(4)H(4))(2) L has been prepared from the reaction of Ph(2)PCH(2)Li with PCl(NC(4)H(4))(2). The diphenylphosphino group can be selectively oxidized with sulfur to give Ph(2)P(S)CH(2)P(NC(4)H(4))(2) 1. The reaction of L with [MCl(2)(cod)] (M = Pd, Pt) gives the chelate complexes [MCl(2)(L-kappa(2)P,P')] (2, M = Pd; 3, M = Pt) in which the M-P bond to the di(N-pyrrolyl)phosphino group is shorter than that to the corresponding diphenylphosphino group. However, the shorter Pd-P bond is cleaved on reaction of 2 with an additional 1 equiv of L to give [PdCl(2)(L-kappa(1)P)(2)] 4. Complex 4 reacts with [PdCl(2)(cod)] to regenerate 2, and with [Pd(2)(dba)(3)].CHCl(3) to give the palladium(I) dimer [Pd(2)Cl(2)(mu-L)(2)] 5, which exists in solution and the solid state as a 1:1 mixture of head-to-head (HH) and head-to-tail (HT) isomers. The palladium(II) dimer [Pd(2)Cl(2)(CH(3))(2)(mu-L)(2)] 6, formed by the reaction of [PdCl(CH(3))(cod)] with L, also exists in solution as a mixture of HH and HT isomers, although in this case the HT isomer prevails at low temperature and crystallizes preferentially. Complex 6 reacts with TlPF(6) to give the A-frame complex [Pd(2)(CH(3))(2)(mu-Cl)(mu-L)(2)]PF(6) 7. The reaction of L with [RuCp*(mu(3)-Cl)](4) leads to the dimer [Ru(2)Cp*(2)(mu-Cl)(2)(mu-L)] 8, for which the enthalpy of reaction has been measured. The reaction of L with [Rh(mu-Cl)(cod)](2) gives a mixture of compounds from which the dimer [Rh(2)(mu-Cl)(cod)(2)(mu-L)]PF(6) 9 can be isolated. The crystal structures of 2.CHCl(3), 3.CH(2)Cl(2), 4, 5.(1)/(4)CH(2)Cl(2), 6, 7.2CH(2)Cl(2), 8, and 9.CH(2)Cl(2) are reported.

Journal Article↗
PubMed2003

Isolation and characterisation of transition and main group metal complexes supported by hydrogen-bonded zwitterionic polyphenolic ligands.

Reaction of Zr(O(i)Pr)4 or Sn[N(SiMe3)2]2 with the tris-phenol amine ligand H3L(Me/Me) results in the formation of zirconium or tin complexes containing the new C3-symmetric zwitterionic ammonium-trisphenolate ligand HL2-, while increasing the steric bulk of the ligand results in the isolation of a zirconium complex containing the known trianionic ligand L3-.

Journal Article↗
PubMed2003

D-ring modified estrone derivatives as novel potent inhibitors of steroid sulfatase.

A series of novel D-ring modified derivatives of estrone was synthesized and tested as inhibitors of steroid sulfatase (STS). The steroidal D-ring was cleaved via an iodoform reaction and thermal condensation of the resulting marrianolic acid derivative gave 16,17-seco-estra-1,3,5(10)-triene-16,17-imide derivatives, where a piperidinedione moiety is in place of the D-ring. This synthetic approach was found to give a higher overall yield than the literature method of Beckmann rearrangement. A range of alkyl side chains have been introduced on the nitrogen atom of the imido-ring and the corresponding 3-O-sulfamates synthesized. The new D-ring modified estrone derivatives bearing a propyl (39) and a 1-pyridin-3-ylmethyl (46) moiety had IC(50) values of 1 nM when tested in placental microsomes for the inhibition of STS. These compounds are therefore up to 18-fold more potent than EMATE, the very first highly potent irreversible steroidal STS inhibitor.

Crystallography, X-Ray↗
PubMed2003

Synthesis of meso-substituted porphyrins carrying carboranes and oligo(ethylene glycol) units for potential applications in boron neutron capture therapy.

Selective delivery of 10B to tumours is one of the major remaining problems in boron neutron capture therapy (BNCT) of cancer. Porphyrins are selectively accumulated in tumours. Thus two series of carborane-carrying porphyrins were constructed, with additional functionality for attachment of uncharged potentially water-solubilising polyethers. 3-(1,2-Dicarbaclosododecaboran(12)-1-ylmethoxy)benzaldehyde was prepared by protection of the aldehyde of 3-(prop-2-ynyloxy)benzaldehyde as a dithioacetal, treatment with decaborane(14) and deprotection. Condensation with a 3-nitrophenyldipyrromethane gave a separable mixture of meso-(3-nitrophenyl)-meso-(3-carboranylmethoxyphenyl)porphyrins, resulting from extensive scrambling at the porphyrinogen stage. Similarly, condensation of 3-(1,2-dicarbaclosododecaboran(12)-1-yl)benzaldehyde with this dipyrromethane gave an analogous mixture of meso-(3-nitrophenyl)-meso-(3-carboranylphenyl)porphyrins. In this second series, the two regioisomeric bis(nitrophenyl)bis(carboranylphenyl)porphyrins could only be distinguished by X-ray crystallography, their NMR spectra being identical. The nitro groups of the mono(nitrophenyl)porphyrins and the bis(nitrophenyl)-porphyrins were reduced to the corresponding amines with tin(II) chloride and the monoamines were coupled with a omega-methoxy poly(ethylene glycol) chloroformate of mean MW 600 to give the MeOPEGylated tricarboranyl porphyrins.

Boranes↗
PubMed2002

Synthesis and characterization of novel homoleptic N,N-dialkylcarbamato complexes of antimony: precursors for the deposition of antimony oxides.

A series of tris(N,N-dialkylcarbamato)antimony(III) complexes, Sb(O(2)CNR(2))(3) (R = Me, Et, Pr(i)()), have been synthesized and are the first members of this class of compound to have been crystallographically characterized. Sb(O(2)CNMe(2))(3) (1) exists as a weakly bound dimer, whereas its diethyl and diisopropyl analogues (2, 3) are monomeric. In addition, tetrakis(N,N-diethylcarbamato)tin(IV) (4) has been prepared for comparison and shown by single-crystal X-ray analysis to exhibit the relatively rare SnO(8) coordination. Crystallographic data: for 1, a = 8.7520(5) A, b = 14.2970(8) A, c = 11.8150(7) A, beta = 108.029(2) degrees, monoclinic, P2(1)/c, Z = 4; for 2, a = b = 14.4690(2) A, c = 16.6740(2) A, trigonal, Rthremacr;, Z = 6; for 3, a = 11.9881(2) A, b = 11.6521(3) A, c = 19.8780(6) A, beta = 90.401(1) degrees, monoclinic, P2(1)/n, Z = 4; for 4, a = 13.9654(2) A, b = 12.0817(2) A, c = 16.6752(2) A, beta = 108.1960(7) degrees, monoclinic, C2/c, Z = 4. Sb(O(2)CNMe(2))(3) has been used as a single-source precursor in the low-pressure chemical vapor deposition of the senarmonite form of Sb(2)O(3).

Journal Article↗
PubMed2002

Solution and solid-state structure of the anion [Ag(2)[closo-CB(11)H(12)](4)](2-).

Addition of the carbene 1,3-dimesitylimidazol-2-ylidene (IMes) to a toluene solution of Ag[closo-CB(11)H(12)] results in the formation of the complex [(IMes)(2)Ag](2)[Ag(2)[closo-CB(11)H(12)](4)], the anionic component of which contains two silver(I) centers bridged by two carboranes in addition to one terminally bound carborane on each metal, in the solid-state. Comparison of the observed (11)B[(1)H] NMR chemical shifts of [(IMes)(2)Ag](2)[Ag(2)[closo-CB(11)H(12)](4)] or Ag[closo-CB(11)H(12)] with [NBu(4)][closo-CB(11)H(12)] in CD(2)Cl(2) demonstrates that the silver ion interacts significantly with the cage in solution. Theoretical investigations using the ab initio/GIAO/NMR method of [closo-CB(11)H(12)](-) and Na[closo-CB(11)H(12)] as model geometries for the silver salts support experimental evidence for these Ag...[BH] interactions in solution.

Journal Article↗
PubMed2002

Substitution reactions of [Ru(dppe)(CO)(H(2)O)(3)][OTf](2).

The labile nature of the coordinated water ligands in the organometallic aqua complex [Ru(dppe)(CO)(H(2)O)(3)][OTf](2) (1) (dppe = Ph(2)PCH(2)CH(2)PPh(2); OTf = OSO(2)CF(3)) has been investigated through substitution reactions with a range of incoming ligands. Dissolution of 1 in acetonitrile or dimethyl sulfoxide results in the facile displacement of all three waters to give [Ru(dppe)(CO)(CH(3)CN)(3)][OTf](2) (2) and [Ru(dppe)(CO)(DMSO)(3)][OTf](2) (3), respectively. Similarly, 1 reacts with Me(3)CNC to afford [Ru(dppe)(CO)(CNCMe(3))(3)][OTf](2) (4). Addition of 1 equiv of 2,2'-bipyridyl (bpy) or 4,4'-dimethyl-2,2'-bipyridyl (Me(2)bpy) to acetone/water solutions of 1 initially yields [Ru(dppe)(CO)(H(2)O)(bpy)][OTf](2) (5a) and [Ru(dppe)(CO)(H(2)O)(Me(2)bpy)][OTf](2) (6a), in which the coordinated water lies trans to CO. Compounds 5a and 6a rapidly rearrange to isomeric species (5b, 6b) in which the ligated water is trans to dppe. Further reactivity has been demonstrated for 6b, which, upon dissolution in CDCl(3), loses water and coordinates a triflate anion to afford [Ru(dppe)(CO)(OTf)(Me(2)bpy)][OTf] (7). Reaction of 1 with CH(3)CH(2)CH(2)SH gives the dinuclear bridging thiolate complex [[(dppe)Ru(CO)](2)(mu-SCH(2)CH(2)CH(3))(3)][OTf] (8). The reaction of 1 with CO in acetone/water is slow and yields the cationic hydride complex [Ru(dppe)(CO)(3)H][OTf] (9) via a water gas shift reaction. Moreover, the same mechanism can also be used to account for the previously reported synthesis of 1 upon reaction of Ru(dppe)(CO)(2)(OTf)(2) with water (Organometallics 1999, 18, 4068).

Journal Article↗