PubMed Health⌕ Search

Biomedical subjects

Masahiko Abe

Publications and source records attributed to Masahiko Abe.

At least 19 recordsLinked to original sources
PubMed2007

Cationic surfactant changes the morphology of DNA molecules.

The effect of cetyltrimethylammonium bromide (CTAB), a cationic surfactant, was investigated on the aggregated form of DNA molecules in water at a given temperature. CTAB caused changes in the aggregated form of DNA molecules from loosely packed spherical to rodlike through toroidal one with increasing concentration below the critical micelle concentration (CMC). The change was suggested to arise from the ion complex formation between CTAB and DNA molecules due to the electrostatic interaction, thereby reducing the surface charge and solubility in water of the latter.

Cations↗
PubMed2006

RBM band shift-evidenced dispersion mechanism of single-wall carbon nanotube bundles with NaDDBS.

The dispersion process of single-wall carbon nanotube (SWNT) by using sodium dodecylbenzene sulfonate (NaDDBS) was studied by means of surface tension measurements, ultraviolet-visible (UV-Vis) spectroscopy, scanning electron microscopy (SEM), and transmission electron spectroscopy (TEM). The critical micelle concentration (CMC) and the concentration where the surface tension begins to drop increase by the presence of SWNT. The isotherm of NaDDBS amount adsorbed on SWNT shows the plateau region at 0.2-6 mM and the saturated region above 40 mM. The external surface of SWNT bundle is fully covered with adsorbed NaDDBS at the plateau region, showing that SWNTs can be dispersed with the bundle form. On the other hand, SWNTs are dispersed in individual tubes at the saturated region, where the adsorption amount corresponds to coating of individual tube surfaces with NaDDBS. This dispersion state was confirmed by SEM and TEM observations. The effect of the dispersion state of SWNTs on radial breathing mode in Raman spectrum gave inherent peak shifts, being the in situ evidences on the step-wise dispersion mechanism of the SWNT bundle to the individual tubes.

Journal Article↗
PubMed2006

Adsorption and aggregation properties of heterogemini surfactants containing a quaternary ammonium salt and a sugar moiety.

A novel heterogemini surfactant comprising two hydrocarbon chains and two different hydrophilic groups such as a quaternary ammonium cation and gluconamide nonion N,N-dimethyl-N-[2-(N'-alkyl-N'-gluconamide)ethyl]-1-alkylammonium bromides (2CnAmGlu, where n represents hydrocarbon chain lengths of 8, 10, 12, and 14) was synthesized by reacting N,N-dimethylethylenediamine with alkyl bromide, followed by a reaction with 1,5-D(+)-gluconolactone. The adsorption properties of 2CnAmGlu were characterized by surface tension measurements made using the Wilhelmy plate method, and their aggregation properties were investigated by dynamic light scattering and cryogenic transmission electron microscopy techniques. The relationship between the hydrocarbon chain length and the logarithm of the critical micelle concentration (cmc) for 2CnAmGlu exhibited a linear decrease when the chain length was increased up to 12 and then a departure from linearity at n=14. The surface tension reached 24-26 mN m-1 at each cmc, indicating high efficiency in lowering the surface tension of water. Furthermore, it was found that the structure of the aggregate formed for 2CnAmGlu in solution was influenced by the hydrocarbon chain length; that is, for n=10 and 12, micelles with a hydrodynamic radius of 2-5 nm were formed, whereas vesicles were also observed for n=14.

Adsorption↗
PubMed2006

Polymerizable cationic gemini surfactant.

A polymerizable cationic gemini surfactant, [CH(2)=C(CH(3))COO(CH(2))(11)N(+)CH(3))(2)CH(2)](2).2Br(-), 1 has been synthesized and its basic interfacial properties were investigated (in water and in the presence of 0.05 M NaBr). For comparison, the properties of monomeric surfactant corresponding to 1, CH(2)=C(CH(3))COO(CH(2))(11)N(+)(CH(3))(3).Br(-), 2, were also investigated. Parameters studied include cmc (critical micelle concentration), C(20) (required to reduce the surface tension of the solvent by 20 mN/m), gamma(cmc) (the surface tension at the cmc), Gamma(cmc) (the maximum surface excess concentration at the air/water interface), A(min) (the minimum area per surfactant molecule at the air/water interface), and cmc/C(20) ratio (a measure of the tendency to form micelles relative to adsorb at the air/water interface). For the polymerizable gemini surfactant, 1, the methacryloxy groups at the terminal of each hydrophobic group in a molecule have no contact with the air/water interface in the monolayer, whereas for the corresponding monomeric surfactant, 2, the methacryloxy group contacts at the interface forming a looped configuration like a bolaamphiphile. Polymerized micelles of the gemini surfactant are fairly small monodisperse and spherical particles with a mean diameter of 3 nm.

Journal Article↗
PubMed2006

One-step preparation of chitosan-coated cationic liposomes by an improved supercritical reverse-phase evaporation method.

High-pressure carbon dioxide in contact with water dissolves to form carbonic acid, causing a decrease in pH. By use of these characteristics of a CO2/H2O biphasic system, chitosan-coated cationic liposomes of l-alpha-dipalmitoylphosphatidylcholine were successfully prepared by an improved supercritical reverse-phase evaporation (ISCRPE) method. Liposome-chitosan complexes carrying a positive charge were prepared in a single-step procedure without the use of acid or organic solvent, including ethanol. The maximum trapping efficiency of liposomes prepared by the ISCRPE method was 17%, with or without the addition of chitosan, compared to only 2% for liposomes prepared by the Bangham method. Furthermore, the liposomal dispersion was stable at room temperature in a sealed tube for over 30 days.

1,2-Dipalmitoylphosphatidylcholine↗
PubMed2006

Preparation of highly dispersed core/shell-type titania nanocapsules containing a single Ag nanoparticle.

Core/shell-type titania nanocapsules containing a single Ag nanoparticle were prepared. Ag nanoparticles were prepared using the reduction of silver nitrate with hydrazine in the presence of cetyltrimethylammonium bromide (CTAB) as protective agent. The sol-gel reaction of titanium tetraisopropoxide (TTIP) was used to prepare core/shell-type titania nanocapsules with CTAB-coated Ag nanoparticles as the core. TEM observations revealed that the size of the core (Ag particle) and the thickness of the shell (titania) of the core/shell particles obtained are about 10 nm and 5-10 nm, respectively. In addition, the nanocapsules were found to be dispersed in the medium as individual particles without aggregation. Moreover, titania coating caused the surface plasmon absorption of Ag nanoparticles to shift toward the longer wavelength side.

Journal Article↗
PubMed2006

Preparation of liposomes using an improved supercritical reverse phase evaporation method.

Liposomes of various phospholipids were prepared using an improved supercritical reverse phase evaporation (ISCRPE) method that utilizes supercritical carbon dioxide (scCO(2)) as an alternative to organic solvents. Using this method, in the absence of any organic solvent including ethanol, the maximum trapping efficiency of glucose reached 36% for 20 mM l-alpha-dioleoylphosphatidylcholine (DOPC), compared to less than 10% using the Bangham method. Liposomes prepared by the ISCRPE method were highly stable for one month at room temperature. Freeze fractured TEM observations, osmotic shrinkage measurements, and DSC measurements revealed that the liposomes prepared by the ISCRPE method are unilamellar vesicles with loosely packed phospholipids. Comparison of nitrogen with scCO(2) revealed that the presence of CO(2) is necessary for the formation of liposomes.

Journal Article↗
PubMed2006

Calorimetry and cryo-transmission electron microscopic studies of PEG2000-grafted liposomes.

The phase behavior of poly(ethylene glycol) grafted liposomes (PEG-liposomes) was investigated by differential scanning calorimetry (DSC), dynamic light scattering (DLS) and cryo-transmission electron microscopy (cryo-TEM). PEG-liposomes were prepared from mixtures of dipalmitoyl phosphatidylcholine (DPPC) and distearoyl phosphatidylethanolamine with a covalently attached PEG molecular weight of 2000 (DSPE-PEG2000). From the results of DLS measurements, the coexistence of PEG-liposomes and small molecular assemblies were confirmed at mole fractions of DSPE-PEG2000 above about 0.1. Moreover, it was confirmed that small molecular assemblies were disk micelles by cryo-TEM. However, the phase transition enthalpies of PEG-liposomes were hardly changed according to the DSC measurement, though the mole fraction of the PEG lipid increased. From these results, it was suggested that the phase transition enthalpies hardly changed despite mixed micelles being formed because the bilayer structure of the disk micelle maintains high cooperativity between the DPPC molecules.

1,2-Dipalmitoylphosphatidylcholine↗
PubMed2006

Carboxyfluorescein leakage from poly(ethylene glycol)-grafted liposomes induced by the interaction with serum.

The effects of fetal bovine serum (FBS) on carboxyfluorescein (CF) leakage from poly(ethylene glycol)-grafted liposomes (PEG-liposomes) were investigated. PEG-liposomes were prepared from dipalmitoylphosphatidylcholine (DPPC) and distearoyl-N-monomethoxy poly(ethylene glycol)-succinyl-phosphatidylethanolamines (DSPE-PEG) having PEG molecular weights of 1000, 2000, 3000 and 5000. The presence of FBS dramatically increased CF leakage from liposomes near the gel-liquid crystalline phase transition temperature, but had little effect at lower and higher temperatures. The CF leakage from PEG-liposomes whose molecular weight in PEG units was above 2000 was suppressed compared with that of liposomes without PEG. And, there was hardly any difference in the effect of the PEG molecular weight of the PEG-lipids on CF leakage from PEG-liposomes with FBS when PEG-lipids with a molecular weight in PEG units above 2000 were used. On the other hand, the leakage of CF from liposomes containing 0.145 mol fractions of DSPE-PEG1000 was larger than that of liposomes without PEG. Furthermore, the effects of FBS on the cooperative units of lipid molecules during the gel-liquid crystalline phase transition of liposomes were examined. However, the cooperative units of liposomes with FBS had little change compared with that of liposomes without FBS.

Calorimetry, Differential Scanning↗
PubMed2005

Effective form of sulfoquinovosyldiacyglycerol (SQDG) vesicles for DNA polymerase inhibition.

Sulfoquinovosyldiacyglycerol (SQDG) has a wide range of biological activities that make it an attractive compound for the development of new drugs. Chemically synthesized beta-SQDG-C(18:0) (1,2-di-O-stearoyl-3-O-(6-deoxy-6-sulfo-beta-d-glucopyranosyl)-sn-glycerol), for example, has a potent inhibitory effect on DNA polymerases. We investigated the properties of the vesicle form of beta-SQDG-C(18:0) as the monomer has low solubility in water. The structure of the beta-SQDG-C(18:0) vesicles are highly influenced by NaCl concentration in preparation process. At low NaCl concentrations, the beta-SQDG-C(18:0) vesicles have high surface curvature and form small unilamellar vesicles. Increases in NaCl concentration, resulted in decreased surface curvature and a tendency for beta-SQDG-C(18:0) to form large multilamellar vesicles. The small unilamellar vesicles showed a potent inhibitory effect on DNA polymerase beta, whereas the large multilamellar vesicles had no such effect. We investigated further the relationship between vesicle size and activity by preparing smaller vesicles (262, 99 and 43 nm in diameter) using an extrusion technique. These smaller vesicles had a greater inhibitory effect on DNA polymerase beta activity than non-extruded vesicles. beta-SQDG-C(18:0) vesicles, especially those of small size, were effective in DNA polymerase inhibition and are expected to have high applicability in DNA polymerase study.

Calorimetry, Differential Scanning↗
PubMed2005

Direct synthesis of mesoporous titania particles having a crystalline wall.

In this study, we demonstrate a novel method for preparing crystallized mesoporous titania by using a low-temperature synthesis technique in the presence of cationic surfactant. XRD patterns showed that the titania particles obtained had both hexagonal structure and a wall with anatase crystalline structure. Transmission electron microscopy (TEM) observation and corresponding electron diffraction pattern confirmed that the calcined particles are crystallized mesoporous titania.

Journal Article↗
PubMed2005

Photoinduced reversible change of fluid viscosity.

We report a reversible photoinduced fluid viscosity change. A small amount of a "photoswitchable" azobenzene-modified cationic surfactant (4-butylazobenzene-4'-(oxyethyl)trimethylammonium bromide, AZTMA) was added to a wormlike micellar solution of cetyltrimethylammonium bromide (CTAB) containing sodium salicylate (NaSal). The trans-AZTMA solution had a remarkably high viscosity as a result of the entangled network of wormlike micelles. UV light irradiation on the trans-AZTMA solution remarkably decreased the viscosity of the solution because the bulky structure of cis-AZTMA is likely to disrupt the network structure of wormlike micelles. This photoinduced viscosity change is perfectly reversible between the trans- and cis-AZTMA solutions.

Journal Article↗
PubMed2005

Thermodynamically stable vesicle formation from glycolipid biosurfactant sponge phase.

Thermodynamically stable vesicle (L(alpha1)) formation from glycolipid biosurfactant sponge phase (L(3)) and its mechanism were investigated using a "natural" biocompatible mannosyl-erythritol lipid-A (MEL-A)/L-alpha-dilauroylphosphatidylcholine (DLPC) mixture by varying the composition. The trapping efficiency for calcein and turbidity measurements clearly indicated the existence of three regions: while the trapping efficiencies of the mixed MEL-A/DLPC assemblies at the compositions with X(DLPC)< or =0.1 or X(DLPC)> or =0.8 were almost zero, the mixed assemblies at the compositions with 0.1 or =0.8 were multilamellar vesicles (L(alpha)) with diameter from 2 to 10 microm. Meanwhile, dynamic light scattering (DLS) measurement revealed that the average size of the vesicles at the composition of X(DLPC)=0.3 was 633.2 nm, which is remarkably small compared to other compositions. Moreover, the mixed vesicle solution at the composition of X(DLPC)=0.3 was slightly bluish and turbid and kept its dispersion stability at 25 degrees C for more than 3 months, indicating the formation of a thermodynamically stable vesicle (L(alpha1)). These results exhibited the formation of a thermodynamically stable vesicle (L(alpha1)) with a high dispersibility from the MEL-A/DLPC mixture. The asymmetric distribution of MEL-A and DLPC in the two vesicle monolayers caused by the difference in geometrical structures is very likely to have changed their self-assembled structure from a sponge phase (L(3)) to a thermodynamically stable vesicle (L(alpha1)).

Freeze Fracturing↗
PubMed2005

Synthesis of microtubes with a surface of "house of cards" structure via needlelike particles and control of their pore size.

The conditions for synthesizing microtubes with a surface of "house of cards" structure via needlelike particles were examined in detail. Magnesium carbonate trihydrate was formed as a metastable phase in the reaction process using magnesium hydroxide and carbon dioxide as starting materials. Subsequently, in the formation of basic magnesium carbonate from magnesium carbonate trihydrate, microtubes with a surface of house of cards structure were obtained via needlelike particles of magnesium carbonate trihydrate under certain conditions where the temperature and added amount of sodium hydroxide were properly controlled. The pore size of the microtubes could be controlled within a range of 0.5-6 microm by adjusting the condition of needlelike particle formation. In addition, the sustainability of naphthalene release from the microtube was found to be about 6 times higher than that from naphthalene crystal.

Journal Article↗
PubMed2005

Membrane properties of cationic liposomes composed of dipalmitoylphosphatidylcholine and dipalmityldimethylammonium bromide.

Cationic liposomes composed of dipalmitoylphosphatidylcholine (DPPC) and dipalmityldimethylammmonium bromide (DPAB) were prepared by the Bangham method and the effect of DPAB on the membrane properties was examined in terms of liposomal shape, particle size, trapping efficiency, surface potential and dispersibility. The dispersibility of the mixed DPPC/DPAB liposomes (the mole fraction of DPAB (XDPAB)>==0.05) was excellent and the dispersibility was maintained for 6 months, since the zeta-potential of the mixed liposomes was approximately +40 mV. The trapping efficiency of the mixed DPPC/DPAB liposomes (XDPAB=0.05) was 10 times greater than that of the DPPC liposomes, and the value was largest among the mixed liposomes (XDPAB=0-1.0). Freeze-fracture electron micrographs indicated that the shape of the mixed DPPC/DPAB liposomes (XDPAB=0.05) was that of large unilamellar vesicles (LUVs) with a diameter of approximately 2 microm, while the shape of the DPPC liposomes was that of multilamellar vesicles (MLVs). The mixed liposomes had, therefore, a high trapping efficiency. Furthermore, the shape of the mixed DPPC/DPAB liposomes (XDPAB=0.75) was also that of LUVs with a diameter of approximately 2 microm and these had a high trapping efficiency. Whereas, the particle size (500 nm) of the mixed DPPC/DPAB liposomes (XDPAB=0.25) was smaller than that of the former and had the minimum trapping efficiency. The phase transition temperature of the liposomal bilayer membranes indicated a maximum value at 0.25-0.30 mole fractions of DPAB. These facts were considered to be due to the fact that DPPC and DPAB, whose molar ratio was 7.5:2.5, were tightly packed in the liposomal bilayer membranes and that the curvature of the liposomal particle was resultantly large. Nevertheless, LUVs having a high trapping efficiency were easily obtained by mixing a small amount of DPAB with the DPPC.

1,2-Dipalmitoylphosphatidylcholine↗
PubMed2005

Effects of poly(ethylene glycol) (PEG) concentration on the permeability of PEG-grafted liposomes.

Poly(ethylene glycol)-grafted liposomes (PEG-liposomes) were prepared from dipalmitoylphosphatidylcholine (DPPC) with various amounts of distearoyl-N-monomethoxy poly(ethylene glycol)-succinyl-phosphatidylethanolamines (DSPE-PEG) with PEG molecular weights of 1000, 2000, 3000 and 5000. The effects of DSPE-PEG concentration on the permeability of PEG-liposomes were investigated using carboxyfluorescein (CF). In the gel state, the CF leakage from PEG-liposomes was decreased with increasing mole fractions of DSPE-PEG for all PEG molecular weights. In the liquid-crystalline state, the CF leakage from PEG-liposomes containing DSPE-PEG1000 gradually increased with increasing mole fractions of DSPE-PEG, while that of PEG-liposomes whose molecular weight in PEG units was above 2000 rapidly decreased by the addition of DSPE-PEG. Furthermore, no effect of PEG molecular weight on CF leakage was observed. The relationship between the fluorescence polarization of 1,6-diphenyl-1,3,5-hexatriene (DPH) (or 1-(4-trimethylammoniumphenyl)-6-phenyl-1,3,5-hexatriene (TMA-DPH)) and the mole fraction of DSPE-PEG for PEG-liposomes was also investigated. No significant changes in fluorescence polarization of DPH for liposomal bilayer membranes was observed in the gel and liquid-crystalline states due to the addition of DSPE-PEG, while that of TMA-DPH was decreased compared with that of liposomes without DSPE-PEG in both states.

Dose-Response Relationship, Drug↗
PubMed2004

Design of vesicles of 1,2-di-O-acyl-3-O-(beta-D-sulfoquinovosyl)-glyceride bearing two stearic acids (beta-SQDG-C18), a novel immunosuppressive drug.

The immunosuppressive effects of synthetic sulfo-glycolipids in the class of sulfoquinovosyl-diacylglycerols (SQDG), including stereoisomers, were interesting in development of a promising clinical drug. Especially, 1,2-di-O-stearoyl-3-O-(6-deoxy-6-sulfo-beta-D-glucopyranosyl)-sn-glycerol (beta-SQDG-C18) was thought to be a valuable candidate because of the preliminary observations of its high inhibitory activities in spite of low toxicities. The problem of using this material is to find an applicable way avoiding its low solubility in water. The vesicle formation of beta-SQDG-C18 is advantageous to i.v. administration in its chemico-structural character. With preparation in water, beta-SQDG-C18 was hard to form vesicles, because its hydrophilicity was strong. We examined the suitable parameter of the vesicle forming condition. It was possible to take a balance between the hydrophilicity and the hydrophobicity of the beta-SQDG-C18 molecule to be optimized to form vesicles in 150 mM PBS. In addition, we demonstrated the strong immunosuppressive activity of beta-SQDG-C18 vesicles. This is the first report of the preparation method of beta-SQDG-C18 vesicles, which should facilitate in vitro and in vivo application.

Drug Stability↗