PubMed Health⌕ Search

Biomedical subjects

Masahisa Wada

Publications and source records attributed to Masahisa Wada.

10 recordsLinked to original sources
PubMed2006

Surface density of cellobiohydrolase on crystalline celluloses. A critical parameter to evaluate enzymatic kinetics at a solid-liquid interface.

The enzymatic kinetics of glycoside hydrolase family 7 cellobiohydrolase (Cel7A) towards highly crystalline celluloses at the solid-liquid interface was evaluated by applying the novel concept of surface density (rho) of the enzyme, which is defined as the amount of adsorbed enzyme divided by the maximum amount of adsorbed enzyme. When the adsorption levels of Trichoderma viride Cel7A on cellulose I(alpha) from Cladophora and cellulose I(beta) from Halocynthia were compared, the maximum adsorption of the enzyme on cellulose I(beta) was approximately 1.5 times higher than that on cellulose I(alpha), although the rate of cellobiose production from cellulose I(beta) was lower than that from cellulose I(alpha). This indicates that the specific activity (k) of Cel7A adsorbed on cellulose I(alpha) is higher than that of Cel7A adsorbed on cellulose I(beta). When k was plotted versus rho, a dramatic decrease of the specific activity was observed with the increase of surface density (rho-value), suggesting that overcrowding of enzyme molecules on a cellulose surface lowers their activity. An apparent difference of the specific activity was observed between crystalline polymorphs, i.e. the specific activity for cellulose I(alpha) was almost twice that for cellulose I(beta). When cellulose I(alpha) was converted to cellulose I(beta) by hydrothermal treatment, the specific activity of Cel7A decreased and became similar to that of native cellulose I(beta) at the same rho-value. These results indicate that the hydrolytic activity (rate) of bound Cel7A depends on the nature of the crystalline cellulose polymorph, and an analysis that takes surface density into account is an effective means to evaluate cellulase kinetics at a solid-liquid interface.

Adsorption↗
PubMed2006

Molecular directionality in cellulose polymorphs.

The recently developed technique of reductive amination, followed by gold labeling, was applied to visualize the reducing ends of cellulose microcrystals from cellulose I, cellulose II, and cellulose III(I). In these crystals, which were also characterized by electron diffraction, the labeling proved that the chains were organized in a parallel fashion in cellulose I from ramie and Valonia and also in cellulose III(I) from Valonia. In microcrystals of cellulose II from mercerized ramie, the labeling method showed that the chains were packed into an antiparallel mode. These results are discussed in terms of the fine structure of cellulose I where neighboring microfibrils of opposite polarity are visualized. The mercerization process whereby cellulose I is converted into cellulose II is therefore best described in terms of an intermingling of the cellulose chains from neighboring microfibrils of opposite polarity. As opposed to the case of mercerization the conversion of cellulose I into cellulose III(I) does not require the participation of neighboring microfibrils since the crystalline domains are converted individually.

Boehmeria↗
PubMed2006

Surface acylation of cellulose whiskers by drying aqueous emulsion.

A simple chemical modification route to confer high hydrophobicity to crystalline cellulose surface was demonstrated using tunicin whiskers as model material. An alkyenyl succinic anhydride (ASA) aqueous emulsion was mixed with cellulose suspension, freeze-dried, and heated to 105 degrees C. The bulk degree of substitution (DS) was evaluated by FT-IR spectrometry, elemental analysis, and weight gain. The surface DS was quantified by X-ray photoelectron spectroscopy. The surface-acylated whiskers retained their morphological and crystalline integrity, but due to their surface acylation, they are readily dispersible in solvents of low polarity such as 1,4-dioxane. These whiskers can also be well dispersed in polystyrene to form a nanocomposite.

Animals↗
PubMed2005

Three-dimensional aqueous-derived biomaterial scaffolds from silk fibroin.

A new all-aqueous process is described to form three-dimensional porous silk fibroin matrices with control of structural and morphological features. The result of this process are scaffolds with controllable porosity and pore sizes that fully degrade in the presence of proteases, unlike prior methods to generate silk-based biomaterials that required the use of organic solvent treatments to impart control of structure and stability in aqueous environments, with low rates of proteolytic hydrolysis. A mechanism is proposed for this novel process that imparts physical stability via hydrophobic interactions. Adjusting the concentration of silk fibroin in water, and the particle size of granular NaCl used in the process, leads to the control of morphological and functional properties of the scaffolds. The aqueous-derived scaffolds had highly homogeneous and interconnected pores with pore sizes ranging from 470 to 940 microm, depending on the mode of preparation. The scaffolds had porosities >90% and compressive strength and modulus up to 320 +/- 10 and 3330 +/- 500 KPa, respectively, when formed from 10% aqueous solutions of fibroin. The scaffolds fully degraded upon exposure to protease during 21 days, unlike the scaffolds prepared from organic solvent processing. These new silk-based three-dimensional matrices provide useful properties as biomaterial matrices due to the all-aqueous mode of preparation, control of pore size, connectivity of pores, degradability and useful mechanical features. Importantly, this process offers an entirely new window of materials properties when compared with traditional silk fibroin-based materials.

Absorbable Implants↗
PubMed2005

Characterization of carbohydrate-binding cytochrome b562 from the white-rot fungus Phanerochaete chrysosporium.

cDNA encoding a hemoprotein similar to the cytochrome domain of extracellular flavocytochrome cellobiose dehydrogenase (CDH) was cloned from the white-rot fungus Phanerochaete chrysosporium. The deduced amino acid sequence implies that there is a two-domain structure consisting of an N-terminal cytochrome domain and a C-terminal family 1 carbohydrate-binding module (CBM1) but that the flavin-containing domain of CDH is not present. The gene transcripts were observed in cultures in cellulose medium but not in cultures in glucose medium, suggesting that there is regulation by carbon catabolite repression. The gene was successfully overexpressed in Pichia pastoris, and the recombinant protein was designated carbohydrate-binding cytochrome b562 (CBCyt. b562). The resonance Raman spectrum suggested that the heme of CBCyt. b562 is 6-coordinated in both the ferric and ferrous states. Moreover, the redox potential measured by cyclic voltammetry was similar to that of the cytochrome domain of CDH. These results suggest that the redox characteristics may be similar to those of the cytochrome domain of CDH, and so CBCyt. b562 may have an electron transfer function. In a binding study with various carbohydrates, CBCyt. b562 was adsorbed with high affinity on both cellulose and chitin. As far as we know, this is the first example of a CBM1 connected to a domain without apparent catalytic activity for carbohydrate; this CBM1 may play a role in localization of the redox protein on the surface of cellulose or on the fungal sheath in vivo.

Amino Acid Sequence↗
PubMedDate not supplied

Thermally reversible hydration of beta-chitin.

Thermally induced transition between anhydrous and hydrated forms of highly crystalline beta-chitin was studied by differential thermal calorimetry (DSC) and X-ray diffraction. DSC of wet beta-chitin in a sealed pan gave two well-defined endothermic peaks at 85.2 and 104.7 degrees C on heating and one broad exothermic peak at between 60 and 0 degrees C on cooling. These peaks were highly reproducible and became more distinct after repeated heating-cooling cycles. The X-ray diffraction pattern of wet beta-chitin at elevated temperature showed corresponding changes in d-spacing between the sheets formed by stacking of chitin molecules. These phenomena clearly show that water is reversibly incorporated into the beta-chitin crystal and that the temperature change induces transitions between anhydrous, monohydrate, and dihydrate forms. The DSC behavior in heating-cooling cycles, including reversion between the two endothermic peaks, indicated that the transition between monohydrate and dihydrate was a fast and narrow-temperature process, whereas the one between the anhydrous and the monohydrate form was a slow and wide-temperature process.

Absorption↗
PubMedDate not supplied

Alkali-induced conversion of beta-chitin to alpha-chitin.

Crystal conversion of beta-chitin to alpha-chitin by aq. NaOH treatment was studied for a highly crystalline beta-chitin sample from diatom spine. The minimum NaOH concentration to cause swelling was between 25% and 30% w/w. The alkali-swollen material was poorly crystalline and was regenerated as alpha-chitin on washing with water. This conversion caused total collapse of the original microfibrillar morphology. These features are similar to those of 7 N-8 N HCl treatment reported earlier, but alkali treatment was free from depolymerization or deacetylation.

Alkalies↗
PubMedDate not supplied

Inclusion complex of beta-chitin and aliphatic amines.

Inclusion complexation of beta-chitin with linear aliphatic amines was studied by X-ray diffraction. All tested amines, C3 to C8 monoamines and C2 to C7 diamines with terminal amino groups, reversibly formed crystalline complexes with beta-chitin by immersion of dry chitin in pure liquid. Complex formation caused linear increase in the 010 sheet spacing of beta-chitin depending on the carbon number of amine. The complexes could be classified as type I and type II according to the increment of sheet spacing against carbon number. All monoamines formed type II complexes. In dry conditions, diamine formed a type I complex though the type of diamine complex differed for guest species in wet conditions. Based on the unit cell dimension and thermogravimetry, type II and type I are likely to correspond to guest-host (amine-chitobiose) ratios of 2:1 and 1:1, respectively. These differences seem to arise from varied interactions between functional groups of chitin and amines.

Amines↗
PubMedDate not supplied

Polymorphism of cellulose I family: reinvestigation of cellulose IVI.

Polymorphs of cellulose I, III(I), and IV(I) have been investigated by X-ray diffraction, FT-IR, and solid-state (13)C NMR spectroscopy. Highly crystalline cellulose III(I) samples were prepared by treating cellulose samples in supercritical ammonia at 140 degrees C for 1 h, and conventional cellulose III(I) samples were prepared by liquid ammonia treatment. The cellulose IV(I) sample of highest crystallinity was that prepared from Cladophora cellulose III(I) in supercritical ammonia, followed by the sample treated in glycerol at 260 degrees C for 0.5 h, whereas the lowest crystallinity was observed in ramie cellulose prepared by conventional liquid ammonia treatment followed by glycerol annealing. In general, the perfection of cellulose IV(I) depends on the crystallinity of the original material: either of the starting cellulose I or of the cellulose III(I) after ammonia treatment. The product thus obtained was analogous to cellulose I(beta), which is what it should be called rather than cellulose IV(I). If the existence of the polymorph cellulose IV(I) is not accepted, the observations on which it has been based may be explained by the fact that the structure termed cellulose IV(I) is cellulose I(beta) which contains lateral disorder.

Ammonia↗