PubMed Health⌕ Search

Biomedical subjects

Masashi Ohmae

Publications and source records attributed to Masashi Ohmae.

12 recordsLinked to original sources

Chitinase-catalyzed synthesis of an alternatingly N-sulfonated chitin derivative.

An alternatingly N-sulfonated chitin derivative (2) was synthesized via ring-opening polyaddition of an N-sulfonated chitobiose oxazoline derivative (1) catalyzed by chitinases from Bacillus sp. and Serratia marcescens. The polymerization proceeded homogeneously, providing 2 as a water-soluble polysaccharide in good yields with total control of regioselectivity and stereochemistry. M(n) of 2 reached 1900 and 4180 by use of chitinases from Bacillus sp. and Serratia marcescens, which correspond to 8-10 (n = 4-5) and 18-20 (n = 9-10) saccharide units, respectively. These results indicate that M(n) of 2 is controllable by selecting chitinases from different origins. It is considered that the C-2 position of the nonreducing unit in the oxazoline-type monomer is not deeply involved in the catalysis of chitinase.

Bacillus↗

Synthesis of fluorinated chitin derivatives via enzymatic polymerization.

Synthesis of fluorinated chitin derivatives has been achieved using chitinase from Bacillus sp. as a catalyst. 6'-Fluoro- (1a), 6-fluoro- (1b) and 6,6'-difluoro- (1c) chitobiose oxazoline derivatives were newly prepared as TSAS monomers for chitinase. Ring-opening polyaddition of these monomers proceeded effectively at pH 8.0-9.0 and 30-40 degrees C, giving rise to alternatingly 6-fluorinated chitin derivatives (2a and 2b) from 1a and 1b, and fully 6-fluorinated chitin derivative (2c) from 1c under total control of regioselectivity and stereochemistry. XRD measurements revealed that polysaccharides 2a and 2b had crystalline structures similar to that of alpha-chitin. [reaction: see text]

Catalysis↗

A hyaluronidase supercatalyst for the enzymatic polymerization to synthesize glycosaminoglycans.

Hyaluronidase (HAase) catalyzes multiple enzymatic polymerizations with controlling regio- and stereoselectivity perfectly. This behavior, that is, the single enzyme being effective for multireactions and retaining the enzyme catalytic specificity, is not usual, and hence, HAase is a supercatalyst. Various sugar oxazoline monomers prepared based on the concept "transition-state analogue substrate" were successfully polymerized and copolymerized with HAase catalysis, yielding natural and unnatural glycosaminoglycans.

Carbohydrate Conformation↗

Chitinase-catalyzed synthesis of alternatingly N-deacetylated chitin: a chitin-chitosan hybrid polysaccharide.

A chitin-chitosan hybrid polysaccharide (2) having a beta(1-->4)-linked alternating structure of an N-acetyl-D-glucosamine (GlcNAc) unit and a D-glucosamine (GlcN) unit was synthesized via chitinase-catalyzed polymerization of an oxazoline derivative of a GlcNbeta(1-->4)GlcNAc monomer (1). Monomer 1 was designed as a transition-state analogue substrate (TSAS) monomer for chitinase catalysis, which belongs to the glycoside hydrolase family 18. Monomer 1 was effectively polymerized by the catalysis of enzymes from Bacillus sp., Serratia marcescens and Streptomyces griseus, under weak alkaline conditions, giving rise to a water-soluble hybrid polysaccharide (2) in good yields. Molecular weights of 2 reached 2,020 with using chitinase from Serratia marcescens, which corresponds to 10-12 saccharide units.

Acetylation↗

Enzymatic polymerization to novel polysaccharides having a glucose-N-acetylglucosamine repeating unit, a cellulose-chitin hybrid polysaccharide.

A cellulose-chitin hybrid polysaccharide having alternatingly beta(1-->4)-linked D-glucose (Glc) and N-acetyl-d-glucosamine (GlcNAc) was synthesized via two modes of enzymatic polymerization. First, a sugar oxazoline monomer of Glcbeta(1-->4)GlcNAc (1) was designed as a transition-state analogue substrate (TSAS) monomer for chitinase catalysis. Monomer 1 was recognized by chitinase from Bacillus sp., giving rise to a cellulose-chitin hybrid polysaccharide (2) via ring-opening polyaddition with perfect regioselectivity and stereochemistry. Molecular weight (M(n)) of 2 reached 4030, which corresponds to 22 saccharide units. Second, a sugar fluoride monomer of GlcNAcbeta(1-->4)Glc (3) was synthesized for the catalysis of cellulase from Trichoderma viride. The enzyme catalyzed polycondensation of 3, providing a cellulose-chitin hybrid polysaccharide (4) in regio- and stereoselective manner. M(n) of 4 reached 2840, which corresponds to 16 saccharide units. X-ray diffraction measurements revealed that these hybrid polysaccharides did not form any characteristic crystalline structures. Furthermore, these unnatural hybrids of 2 and 4 were successfully digested by lysozyme from human neutrophils.

Acetylglucosamine↗

Chemical reaction at specific sites and reaction-induced self-assembly as observed by in situ and real time SANS: enzymatic polymerization to synthetic cellulose.

We have investigated the self-assembling process of cellulose artificially synthesized via enzymatic polymerization by means of in situ and time-resolved SANS (small-angle neutron scattering). The results elucidated the following: (i) Cellulose molecules synthesized at a special reaction site of the enzyme (cellulase) located on or near the smooth surface of self-assembled enzymes formed in the reaction medium. (ii) The synthesized molecules associated themselves via DLA (diffusion-limited association) and crystallized into fibrils. (iii) The fibrils formed the aggregates, which had surface fractal dimension D(s) increasing from 2 to 2.3 with the reaction time, on the smooth surface of the enzyme aggregates.

Biocompatible Materials↗

Enzymatic polymerization behavior using cellulose-binding domain deficient endoglucanase II.

A mutant enzyme, EGII(core), in which the cellulose-binding domain was deleted from endoglucanase II from Trichoderma viride, was expressed in yeast, and the secreted enzyme was examined for the enzymatic polymerization to obtain artificial cellulose. EGII(core) polymerized beta-cellobiosyl fluoride to afford crystalline cellulose of type II. Comparison of the polymerization behavior of EGII(core) with that of EGII revealed the following: i) the crystalline product obtained with EGII(core) was stable in the polymerization solution, although the product was readily hydrolyzed in the presence of EGII; ii) the turnover number of EGII(core) was as high as that of EGII; iii) EGII(core) produced highly crystalline cellulose. EGII(core) is therefore advantageous for enzymatic polymerization.

Cellobiose↗

Enzymatic glycosidation of sugar oxazolines having a carboxylate group catalyzed by chitinase.

Enzymatic glycosidation using sugar oxazolines 1-3 having a carboxylate group as glycosyl donors and compounds 4-6 as glycosyl acceptors was performed by employing a chitinase from Bacillus sp. as catalyst. All the glycosidations proceeded with full control in stereochemistry at the anomeric carbon of the donor and regio-selectivity of the acceptor. The N,N'-diacetyl-6'-O-carboxymethylchitobiose oxazoline derivative 1 was effectively glycosidated, under catalysis by the enzyme, with methyl N,N'-diacetyl-beta-chitobioside (4), pent-4-enyl N-acetyl-beta-D-glucosaminide (5), and methyl N-acetyl-beta-D-glucosaminide (6), affording in good yields the corresponding oligosaccharide derivatives having 6-O-carboxymethyl group at the nonreducing GlcNAc residue. The N,N'-diacetyl-6-O-carboxymethylchitobiose oxazoline derivative 2 was subjected to catalysis by the enzyme catalysis; however, no glycosidated products were produced through the reactions with 4, 5, and 6. Glycosidation reactions of the beta-d-glucosyluronic-(1-->4)-N-acetyl-D-glucosamine oxazoline derivative 3 proceeded with each of the glycosyl acceptors, giving rise to the corresponding oligosaccharide derivative having a GlcA residue at their nonreducing termini in good yields.

Bacillus↗

Rapid oligosaccharide synthesis using a fluorous protective group.

The Bfp-OH, a novel fluorous protecting reagent, was able to be easily prepared. The Bfp group was readily introduced to a carbohydrate, removed in high yield, and recyclable after cleavage. The use of the Bfp group made it possible to synthesize a pentasaccharide by minimal column chromatography purification. Each synthetic intermediate was able to be easily purified only by simple fluorous-organic solvent extraction and monitored by TLC, NMR, and MS.

Catalysis↗

Enzymatic synthesis of chondroitin and its derivatives catalyzed by hyaluronidase.

The enzymatic polymerization to provide synthetic chondroitin and its derivatives is reported here, the first example of such in vitro synthesis to date. N-Acetylchondrosine (GlcAbeta(1-->3)GalNAc) oxazoline (1a) and its derivatives (1b-1f) were designed and synthesized as novel transition state analogue substrate monomers for catalysis by hyaluronidase. Hyaluronidase is a hydrolysis enzyme of chondroitin that also catalyzes the formation of repeated glycosidic bonds in in vitro synthesis, rather than in the catabolic direction. Monomers of 2-methyl (1a), 2-ethyl (1b), and 2-vinyl (1f) oxazoline derivatives were polymerized using this enzyme, via ring-opening polyaddition with total control of regioselectivity and stereochemistry. These reactions provided the corresponding synthetic chondroitin (natural type; N-acetyl, 2a) and the derivatives (unnatural type) with N-propionyl (2b) and N-acryloyl (2f) functional groups at the C2 position of all the galactosamine units, in good yields. Monomers of 2-n-propyl (1c) and 2-isopropyl (1d) oxazoline derivatives were polymerized to produce 2c and 2d in low yield. The 2-phenyl oxazoline derivative (1e) did not afford any enzyme-catalyzed products. M(n) values of 2a and 2b reached 4800 and 4000, respectively. The M(n) value of 2a corresponds to that of the naturally occurring chondroitin. Thus, hyaluronidase catalysis allows the in vitro production of not only natural type but also the formation of unnatural type chondroitins.

Catalysis↗

Bottom-up synthesis of hyaluronan and its derivatives via enzymatic polymerization: direct incorporation of an amido functional group.

This paper reports the synthesis of hyaluronan (HA) and its derivatives via the hyaluronidase-catalyzed polymerization of 2-substituted oxazoline derivative monomers designed as "transition-state analogue substrates". Polymerization of 2-methyl oxazoline monomer from N-acetylhyalobiuronate (GlcAbeta(1-->3)GlcNAc) effectively proceeded at pH 7.5 and 30 degrees C, giving rise to synthetic HA (natural type) in an optimal yield of 78% via ring-opening polyaddition under total control of regioselectivity and stereochemistry. Hyaluronidase catalysis enabled the polymerization of 2-ethyl, 2-n-propyl, and 2-vinyl monomers, affording the corresponding HA derivatives (unnatural type) with N-propionyl, N-butyryl, and N-acryloyl functional groups, respectively, at the C2 position of all glucosamine units in good yields. The 2-isopropyl oxazoline derivative provided the N-isobutyryl derivative of HA in low yields. Monomers of 2-phenyl and 2-isopropenyl oxazoline derivatives were not polymerized. The mechanism of the polymerization is discussed.

Amides↗

Enzymatic synthesis of chondroitin 4-sulfate with well-defined structure.

Synthesis of chondroitin sulfate (ChS) with well-defined structure was achieved for the first time by hyaluronidase-catalyzed polymerization. N-Acetylchondrosine (GlcAbeta(1-->3)GalNAc) oxazoline derivatives sulfated at C4 (1a), C6 (1b), and both C4 and C6 (1c) in the GalNAc unit were synthesized as transition state analogue substrate monomers for hyaluronidase (HAase) catalysis. Compound 1a was effectively polymerized by the enzyme, giving rise to synthetic ChS sulfated perfectly at the C4 position in all N-acetylgalactosamine units (Ch4S, 2a) in good yields. Molecular weights (Mn) of 2a ranged from 4000 to 18,400, which were controlled by varying reaction conditions. Compounds 1b and 1c were not catalyzed by the enzyme, affording the corresponding disaccharides through the oxazoline ring-opening without formation of polysaccharides.

Animals↗