Biomedical subjects

Masayuki Tokita

Publications and source records attributed to Masayuki Tokita.

7 recordsLinked to original sources

PubMed2006

Liesegang pattern formation in kappa-carrageenan gel.

We report a new class of the spatial pattern formation process in which the gel plays essential roles. The system studied here is the solution of kappa-carrageenan in which potassium chloride is diffused. The solution transforms into the gel state with the diffusion of potassium chloride. Then the stripe pattern, which is perpendicular to the direction of the diffusion of potassium chloride, appears within the gel. The pattern thus formed in the gel is studied as a function of the concentration of the solution of potassium chloride. We find that the dense region of the stripe pattern consists of the liquid crystalline gel, whereas the dilute region is the amorphous gel. The transition from the amorphous gel to the liquid crystalline gel, hence, occurs in the gel state of kappa-carrageenan. The gel behaves as a pattern-forming substance as well as the supporting medium of the pattern in this system. The period and the thickness of the layers of liquid crystalline gel are analyzed. Both the period and the thickness of the layers are found to depend strongly on the concentration of the solution of potassium chloride.

Journal Article↗

PubMed2005

Friction coefficient and structural transition in a poly(acrylamide) gel.

The friction coefficient between the polymer network of an opaque poly(acrylamide) gel and water is measured as a function of the mole fraction of cross linker. The friction coefficients of opaque gels are 4 to 5 orders of magnitude smaller than those of the transparent gels. This drastic decrease in friction occurs when the mole fraction of cross linker is 0.2. In opaque gels, the friction coefficient of gels and the mole fraction of cross linker are related by a power law. The network structure of the opaque gels used in the friction measurements is examined with a confocal laser scanning microscope. The opaque gel network consists of a fractal aggregate of colloidal particles. The radius of particles and the volume occupied by the particles depend on the mole fraction of cross linker. Both relationships are well described by the power laws. The power law of the friction coefficient is well explained in terms of the power laws of the structural parameters and the Stokes equation of the hydrodynamic friction for the spherical particle. It indicates that the friction of the opaque gel is determined simply by the structure of the polymer network.

Journal Article↗

PubMed2005

Real space structure of opaque gel.

The structure of the opaque poly(acrylamide) gels is studied by using a confocal laser scanning microscope. The polymer network of the gel consists of the fractal aggregate of the colloidal particles in the higher concentration region of the cross-linker. The diameter of the colloidal particle, which formed in the gel, increases from 180 to 420 nm with an increase of the concentration of cross-linker. On the other hand, the fractal dimensions of the aggregate remain constant, ranging from 1.5 to 1.7. The densities of the particle are calculated to be 0.7 and 1.2 x 103 kg/m3, which are >10 times larger than the average density of the polymer network of the gel. The results indicate that the monomer and the cross-linker are densely cross-linked into the particles.

Journal Article↗

PubMed2004

Swelling behavior of poly(sodium acrylate) gels crosslinked by aluminum ions.

The cylindrical poly(sodium acrylate) gel (SA gel) was synthesized in the glass capillary using aluminum ions as the crosslinker. The swelling ratio of the gel was measured after the repeated exchange of solvent (distilled deionized water, about pH 5.8). The gel exhibited two relaxation processes; at first the gel swells rapidly as exchange of water (the swelling process), then shrinks very slowly (the shrinking process). In order to reveal the microscopic structural change (especially, the formation of hydrogen bonding) by water exchange, attenuated total refraction (ATR) Fourier transform infrared (FT-IR) spectroscopy was applied to the gels with different swelling ratio. The IR absorption peaks of the gel were assigned based on those of poly(sodium acrylate) aqueous solutions at different pH. On the swelling process, the carboxyl groups were gradually protonated, and the intermolecular hydrogen bonding started to form in the gel with maximum swelling ratio. On the shrinking process, the formation of hydrogen bonding gradually increased with long-time repeated water exchange which resulted in the shrinkage of the gel. Effects of the repeated water exchange on the swelling behavior were discussed in terms of the exchange of counter ions and the formation of hydrogen bonding.

Acrylates↗

PubMed2002

Novel plasma-separation dilayer gellan-gellan-sulfate adsorber for direct removal of extra domain A containing fibronectin from the blood of rheumatoid arthritis patients.

Rheumatoid arthritis (RA) patients, in whom cryogelation occurs in the presence of heparin, exhibit abnormally high concentrations of extra domain A containing fibronectin [EDA(+)FN] in their plasma. The selective removal of EDA(+)FN from patient blood is therefore of potential therapeutic benefit. Gellan-sulfate is a candidate ligand for the removal of EDA(+)FN due to its high affinity for FN. In this study, we prepare a novel adsorber for the direct removal of EDA(+)FN from patient blood. The adsorber has both a plasma separation function and EDA(+)FN trapping zones, and is prepared by cross-linking gellan-sulfate with epichlorohydrine. The ratio of gellan-sulfate to gellan in the adsorber is 48%. The surface and internal structure of gellan beads were observed by a range of microscopic techniques, and the beads were found to have a dilayer structure, consisting of a porous outer layer and an underlying gellan-sulfate phase as the adsorber. The affinity constants of the gellan-sulfate beads for EDA(+)FN were almost the same in blood as in buffer because the porous gellan coating acts to separate plasma from the cellular fraction of the blood. The removal rate of plasma proteins and blood cells from mock RA blood was measured for coated and uncoated gellan-sulfate beads. Removal rates were 30-32% for EDA(+)FN, 6-10% for fibrinogen, 10-14% for antithrombin III, 8% for C3, 4-7% for C4, and 0% for albumin. The removal rates of uncoated beads were 11% for white blood cells, 0% for red blood cells and 33% for platelets, whereas removal rates of 0% for white blood cells, 0% for red blood cells and 20% for platelets were achieved for coated beads. The coating effectively inhibits the adsorption of white blood cells and platelets. Existing problems with direct adsorbers, including selectivity and plasma separation, have been solved by this material.

Adsorption↗

PubMed2002

Specific interactions between cryogel components: role of extra domain A containing fibronectin in cryogelation.

Cryogel is a physical gel formed by heterophilic aggregation of extra domain A containing fibronectin [EDA(+)FN], plasma fibronectin (pFN), fibrinogen (Fbg) and heparin (Hep), which are found in high concentrations in the blood of patients suffering from rheumatoid arthritis. In this study, we clarify the specific interactions between cryogel components in terms of the affinity constant (K(A)), obtained by surface plasmon resonance (SPR). It is found that Fbg self-interactions occur at lower temperatures, and that K(A) of Fbg-Hep changes with temperature. Specifically, K(A) (2.0 x 10(8) [M(-1)]) of Fbg-Hep at 5 degrees C increases significantly from that (1.0x10(7) [M(-1)]) at 40 degrees C. K(A) of EDA(+)FN-Hep increases with temperature, by approximately 100-fold between 40 degrees C (K(A)=10(12) [M(-1)]) and 20 degrees C (K(A)=10(10) [M(-1)]). Although K(A) of the FN fragments of Hep-binding domain containing an EDA region [EDA(+)HBD(+)] and Hep increases with temperatures above 30 degrees C, K(A)s of HBD(+)-Hep and EDA(+)-Hep are not temperature-dependent. Therefore, EDA(+)HBD(+), formed as a special structure for high Hep affinity, exhibits temperature-dependent interaction with Hep. These results suggest that the main role of EDA(+)FN in cryogelation is to support the interaction with Hep.

Binding Sites↗

PubMed2002

Immobilized gellan sulfate surface for cell adhesion and multiplication: development of cell-hybrid biomaterials using self-produced fibronectin.

A new concept for cell-hybrid biomaterial is proposed in which human unbilical vein endothelial cells (HUVEC) are adhered to an immobilized gellan sulfate (GS) surface. Extra domain A containing fibronectin (EDA(+)FN) released from HUVEC is necessary for cell adhesion and multiplication. The material design in this study is based on these self-released cell adhesion proteins. The interaction between GS and EDA(+)FN was evaluated using the affinity constant (KA); the value obtained was 1.03x10(8) (M(-1)). These results suggest that the adhesion of HUVEC to GS may be supported by the adhesion of EDA(+)FN to GS. We also found that this new material adheres to HUVEC, allowing the reintroduction of EDA(+)FN, which is self-produced by the cell. This material is relatively easy to produce, not requiring the usual coating of adhesion proteins in pretreatment.

Carbohydrate Sequence↗