PubMed Health⌕ Search

Biomedical subjects

Masayuki Yamato

Publications and source records attributed to Masayuki Yamato.

At least 19 recordsLinked to original sources
PubMed2006

Bio-functionalized thermoresponsive interfaces facilitating cell adhesion and proliferation.

Bio-functionalized thermoresponsive culture interfaces co-immobilized with cell adhesive peptide, RGDS, and cell growth factor, insulin (INS), are investigated to promote initial cell adhesion and cell growth for further cell sheet engineering applications. These bio-functionalized interfaces were prepared by electron beam-induced copolymerization of N-isopropylacrylamide (IPAAm) with its carboxyl-derivatized analog, 2-carboxyisopropylacrylamide (CIPAAm), and grafting onto tissue culture polystyrene dishes, followed by immobilization of RGDS and/or INS to CIPAAm carboxyls. Adhesion and proliferation of bovine carotid artery endothelial cells (ECs) were examined on the RGDS-INS co-immobilized thermoresponsive interfaces. Immobilized RGDS facilitated initial EC adhesion on the surfaces and INS modification was demonstrated to induce EC proliferation, respectively. More pronounced EC growth was indicated by co-immobilization of appropriate amount of RGDS and INS. This may be due to synergistic effect of direct co-stimulation of adhered ECs by surface-immobilized RGDS and INS molecules. ECs grown on the RGDS-INS co-immobilized thermoresponsive interfaces can also be recovered spontaneously as viable tissue monolayers by solely reducing culture temperature. RGDS-INS co-immobilized thermoresponsive interfaces strongly supported initial EC adhesion and growth than unmodified thermoresponsive surfaces even under serum-free culture. Addition of soluble growth factors to serum-free culture medium effectively induced EC proliferation to confluency. Co-immobilization of cell adhesion peptides and growth factors on thermoresponsive surfaces should be effective for rapid preparation of intact cell sheets and their utilization to regenerative medicine.

Acrylamides↗
PubMed2006

Electrical coupling of cardiomyocyte sheets occurs rapidly via functional gap junction formation.

Previously, we have successfully created pulsatile myocardial tissue grafts using our novel technology, "cell sheet engineering", that layers cell sheets fabricated on temperature-responsive culture dishes to form three-dimensional (3-D) structures. Electrical coupling is established between layered neonatal rat cardiomyocyte sheets, resulting in the synchronized beating of 3-D myocardial tissues. However, the mechanism by which these layered cardiomyocyte sheets communicate electrically is not well-understood. In this study, we used a multiple-electrode extracellular recording system and demonstrated that bilayer cardiomyocyte sheets coupled electrically with slight delays 34+/-2 min (mean+/-SEM) after layering. These delays gradually decreased and the electrical actions of layered cell sheets were completely coupled 46+/-3 min (mean+/-SEM) after initial layering. Immunohistological analysis showed that connexin43, a gap junction (GJ)-related protein, existed not only at cell-to-cell interfaces but also on the free cell membrane in the cardiomyocyte sheet. Additionally, neither connexin40 nor connexin45, but only connexin43 was detected between bilayer cardiomyocyte sheets within 30 min after layering. Dye transfer assay demonstrated that the exchange of small molecules via GJs occurred within 30 min. The cell sheet manipulation technique using the temperature-responsive culture dishes has substantial advances and the exciting potential in the fields of cell and tissue physiology, as well as tissue engineering.

Action Potentials↗
PubMed2006

Transplantable retinal pigment epithelial cell sheets for tissue engineering.

The native retinal pigment epithelium (RPE) exists as a monolayer structure and is critically involved in the maintenance of photoreceptors. Damage or destruction of the RPE due to a variety of diseases therefore often results in loss of vision. With regenerative purposes in mind, we have examined various culture conditions such as the initial cell density and the addition of various supplements in an effort to produce transplantable RPE cell sheets that can be harvested without defects. We demonstrate that the cell density in cultured RPE sheets increased linearly with the number of seeded cells and that RPE sheets were harvested without defects and limited contraction due to cytoskeletal reorganization, when TGF-beta2 was added to the growth medium. Results from histological analysis and the measurement of trans-epithelial resistance also demonstrates that these RPE cell sheets exist as monolayer structure, similar to the native RPE, with intact cell-to-cell junctions. Therefore, these methods provide significant insight into the fabrication of transplantable RPE cell sheets that can be applied to RPE regenerative therapies to restore lost vision.

Cell Count↗
PubMed2006

Polysurgery of cell sheet grafts overcomes diffusion limits to produce thick, vascularized myocardial tissues.

Recently, the field of tissue engineering has progressed rapidly, but poor vascularization remains a major obstacle in bioengineering cell-dense tissues, limiting the viable size of constructs due to hypoxia, nutrient insufficiency, and waste accumulation. Therefore, new technologies for fabricating functional tissues with a well-organized vasculature are required. In the present study, neonatal rat cardiomyocytes were harvested as intact sheets from temperature-responsive culture dishes and stacked into cell-dense myocardial tissues. However, the thickness limit for layered cell sheets in subcutaneous tissue was approximately 80 microm (3 layers). To overcome this limitation, repeated transplantation of triple-layer grafts was performed at 1, 2, or 3 day intervals. The two overlaid grafts completely synchronized and the whole tissues survived without necrosis in the 1 or 2 day interval cases. Multistep transplantation also created approximately 1 mm thick myocardium with a well-organized microvascular network. Furthermore, functional multilayer grafts fabricated over a surgically connectable artery and vein revealed complete graft perfusion via the vessels and ectopic transplantation of the grafts was successfully performed using direct vessel anastomoses. These cultured cell sheet integration methods overcome long-standing barriers to producing thick, vascularized tissues, revealing a possible solution for the clinical repair of various damaged organs, including the impaired myocardium.

Animals↗
PubMed2006

An actuated pump on-chip powered by cultured cardiomyocytes.

Cellular functions are frequently exploited as processing components for integrated chemical systems such as biochemical reactors and bioassay systems. Here, we have created a new cell-based microsystem exploiting the intrinsic pulsatile mechanical functions of cardiomyocytes to build a cellular micropump on-chip using cardiomyocyte sheets as prototype bio-microactuators. We first demonstrate cell-based control of fluid motion in a model microchannel without check valves and evaluate the potential performance of the bio-actuation. For this purpose, a poly(dimethylsiloxane) (PDMS) microchip with a microchannel equipped with a diaphragm and a push-bar structure capable of harnessing collective cell fluid mechanical forces was coupled to a cultured pulsating cardiomyocyte sheet, activating cell-based fluid movement in the microchannel by actuating the diaphragm. Cell oscillation frequency and correlated fluid displacement in this system depended on temperature. When culture temperature was increased, collective cell contraction frequency remained cooperative and synchronous but increased, while displacement was slightly reduced. We then demonstrated directional fluid pumping within microchannels using cantilever-type micro-check valves made of polyimide. A directional flow rate of nL min(-1) was produced. This cell micropump system could be further developed as a self-actuated and efficient mechanochemical transducer requiring no external energy sources for various purposes in the future.

Animals↗
PubMed2006

Bioengineered cardiac cell sheet grafts have intrinsic angiogenic potential.

Previously, we have demonstrated the long-term survival of myocardial cell sheet constructs in vivo, with microvascular network formation throughout the engineered tissues. The understanding and control of these vascularization processes are a key factor for creating thicker functional tissues. Here, we show that cardiac cell sheets express angiogenesis-related genes and form endothelial cell networks in culture. After non-invasive harvest and stacking of cell sheets using temperature-responsive culture dishes, these endothelial cell networks are maintained and result in neovascularization upon in vivo transplantation. Interestingly, we also discovered that all of the graft vessels are derived from the grafts themselves and these vessels migrate to connect with the host vasculature. Finally, blood vessel formation within the grafts can be controlled by changing the ratio of endothelial cells. In conclusion, myocardial tissue grafts engineered with cell sheet technology have their own inherent potential for the in vivo neovascularization that can be regulated in vitro.

Animals↗
PubMed2006

Demonstration of a PDMS-based bio-microactuator using cultured cardiomyocytes to drive polymer micropillars.

Natural cellular functions are increasingly exploited for integrated chemical systems such as biochemical reactors and biosensors. We propose to utilize the intrinsic mechanical function of cardiomyocytes, converting chemical energy into mechanical energy. In this report, we demonstrate the working principle of our proposed poly(dimethylsiloxane) (PDMS) based cardiomyocyte bio-microactuator using fabricated PDMS micropillars driven to repetitive motion by attached pulsating cardiomyocytes. Sheets of PDMS embedded with an array of micropillars were fabricated and modified for cardiomyocyte attachment in culture. Primary neonatal rat cardiomyocytes were cultured on the array, attaching to the micropillars and substratum successfully, and exhibiting their typical spontaneous, pulsatile phenotype. Micropillars beat with the coupled cells spontaneously without any triggers. The beat frequency was 1.4 Hz at 37 degrees C and the displacement of the top of the pillar that beat most strongly in our observation was 2.8+/-0.2 microm. From this result, contractile forces of cultured cardiomyocytes were estimated to exceed 3.5 microN. The estimated force is far greater than that of a previously described hydrogel-based cardiomyocyte bio-microactuator (K. Morishima et al., in Micro Total Analysis Systems 2003, ed. M. A. Northrup et al., The Transducers Research Foundation, San Diego, CA, vol. 2, pp. 1125-1128). PDMS compatibility as a base material for bio-microactuator design using cultured cardiomyocytes was verified. This PDMS-based cell microactuator worked for about one week without exchange of the culture medium, and this system could be developed for various purposes in the future as self-actuated and efficient mechanochemical transducers without external energy source requirements.

Algorithms↗
PubMed2006

Maskless liquid-crystal-display projection photolithography for improved design flexibility of cellular micropatterns.

We previously developed an all-in-one photopolymerization device by modifying a commercially available liquid crystal display projector (LCDP) for the preparation of micropatterned surfaces and microfluidic channels without the need for expensive photomasks. In the present study, we demonstrate a simple and reliable method for rapid prototyping of cell micropatterning with high resolution using the modified LCDP device. Fabrication of complicated and flexible patterns was achieved using this device with positive-type photoresist in a two-step process. First, micropatterns on the silanized coverslips were fabricated from positive photoresist. Second, acrylamide monomer solution containing polymerization initiator was dropped onto the micropatterned positive photoresist and copolymerized on the silanized coverslips in situ by thermally initiated radical polymerization. After the reaction, the remnant micropatterned photoresist is easily dissolved, resulting in a polyacrylamide-silane micropattern on the coverslip. The resultant polyacrylamide layer is highly hydrophilic and repels both protein adsorption and cell adhesion. Cells seeded on the micropatterned surfaces therefore attach and spread only on unpolymerized silanized glass surfaces, conforming to the pattern design. This technique is therefore useful for inexpensive, rapid prototyping of surface micropatterns using polymer materials.

Acrylic Resins↗
PubMed2006

Tissue engineered epithelial cell sheets for the creation of a bioartificial trachea.

To successfully engineer a bioartificial tracheal replacement, it is believed that the regeneration of a functional epithelial lining is a key requirement. In the present study, rabbit tracheal epithelial cells were cultured on temperature-responsive culture dishes, under normal culture conditions at 37 degrees C. By simple temperature reduction to 20 degrees C, the cultured epithelial cells were noninvasively harvested as intact sheets, without the use of any proteolytic enzymes. Support Dacron grafts that had been subcutaneously implanted for 4 weeks to allow for host tissue and vessel infiltration were then opened, and the tracheal epithelial cell sheets were transplanted to the luminal surface without sutures. These fabricated constructs were then used as tracheal replacements, in a rabbit model. Four weeks after transplantation, results showed that the tracheal grafts were covered by a mature, pseudostratified columnar epithelium. In contrast, control constructs that did not receive cell sheet transplantation demonstrated only a thin, immature epithelium at the center of the replacement graft. These results therefore demonstrate that these tracheal epithelial cell sheets can create an epithelial lining on the luminal surface of a bioartificial trachea.

Animals↗
PubMed2006

Long-term survival and growth of pulsatile myocardial tissue grafts engineered by the layering of cardiomyocyte sheets.

Recently researchers have attempted to bioengineer three-dimensional (3-D) myocardial tissues using cultured cells in order to repair damaged hearts. In contrast to the conventional approach of seeding cells onto 3-D biodegradable scaffolds, we have explored a novel technology called cell sheet engineering, which layers cell sheets to construct functional tissue grafts. In this study, in vivo survival, function, and morphology of myocardial tissue grafts were examined. Neonatal rat cardiomyocytes were noninvasively harvested as contiguous cell sheets from temperature-responsive culture dishes simply by reducing the culture temperature. Cardiomyocyte sheets were then layered and transplanted into the subcutaneous tissues of athymic rats. The microvasculature of the grafts was rapidly organized within a few days with macroscopic graft beatings observed 3 days after transplantation and preserved up to one year. Size, conduction velocity, and contractile force of transplanted grafts increased in proportion to the host growth. Histological studies showed characteristic structures of heart tissue, including elongated cardiomyocytes, well-differentiated sarcomeres, and gap junctions within the grafts. In conclusion, long-term survival and growth of pulsatile myocardial tissue grafts fabricated by layering cell sheets were confirmed, demonstrating that myocardial tissue regeneration based on cell sheet engineering may prove useful for permanent myocardial tissue repair.

Animals↗
PubMed2006

Transplantation of tissue-engineered epithelial cell sheets after excimer laser photoablation reduces postoperative corneal haze.

PURPOSE: To apply tissue-engineered cell sheet transplantation after excimer laser keratectomy as a novel approach for the reduction of postoperative corneal haze. METHODS: Limbal biopsy specimens were obtained, and epithelial cells were cultured on temperature-responsive culture inserts without the use of feeder cells. Laser keratectomy (7.0-mm ablation zone and 160-microm depth) was performed in the contralateral eye, and autologous epithelial cell sheets were transplanted to the ablated corneal stroma. Transplant and control group eyes were assessed by slit lamp biomicroscopy, and corneal haze was scored in a masked fashion, according to the Fantes grading scale. For further examination histologic and immunohistochemical analyses were performed. RESULTS: Tissue-engineered cell sheets produced stable attachment to the laser-ablated sites, resulting in epithelialization, 5 minutes after transplantation. Conversely, control corneas required 3 to 5 days for complete re-epithelialization. At both 1 and 2 months after surgery, corneal haze was significantly inhibited in the transplant group. Histologic analyses showed that the number of keratocytes undergoing apoptosis was decreased in the transplant group at 3 days after surgery. Similarly, the expression of both collagen III and alpha-smooth muscle actin, which may enhance corneal haze, were diminished in the transplant group at 2 months. CONCLUSIONS: The transplantation of tissue-engineered epithelial cell sheets can successfully prevent the development of corneal haze after excimer laser keratectomy.

Actins↗
PubMed2006

[Nanotechnology-based regenerative medicine--cell sheet engineering utilizing temperature-responsive culture dishes].

Regenerative medicine is believed to overcome shortcomings of conventional therapies including symptomatic drug therapy and surgical removal. We have utilized nanotechnology for regenerative medicine to develop temperature-responsive culture dishes, on which a temperature-responsive polymer is covalently grafted with precise control of its density and thickness in a nanometer scale. Confluent cells cultured on the dishes are intactly harvested as a single contiguous cell sheet by reducing temperature below 32 degrees C, and harvested cell sheets are subjected to tissue reconstruction, named cell sheet engineering. Here, we introduce the examples of clinical applications including corneal regeneration as well as large animal studies.

Animals↗
PubMed2005

Functional human corneal endothelial cell sheets harvested from temperature-responsive culture surfaces.

This study reports a new method for fabricating bioengineered human corneal endothelial cell sheets suitable for ocular surgery and repair. We have initially cultured human corneal endothelial cells on type IV collagen-coated dishes and, after several passages, expanded cells were then seeded onto novel temperature-responsive culture dishes. Four weeks after reaching confluence, these cultured endothelial cells were harvested as intact monolayer cell sheets by simple temperature reduction without enzymatic treatment. Scanning electron microscopy indicated that these cells were primarily hexagonal with numerous microvilli and cilia, similar to the native corneal endothelium. The Na+, K+-ATPase pump sites were located at the cell borders as in vivo. Moreover, cell densities and numbers of pump sites were identical to those of in vivo human corneal endothelium under optimized conditions. A 3H-ouabain binding analysis demonstrated a linear proportionality for cell pump density between confluent cell densities of 575 cells/mm2 and 3070 cells/mm2. We also confirmed Na+, K+-ATPase activity in the sheets in vitro. Xenograft transplantation results showed that the fabricated sheets retain their function of maintaining proper stromal hydration in vivo. We have established a regimen to culture and proliferate human corneal endothelial cells and fabricate endothelial sheets ex vivo morphologically and functionally similar to the native corneal endothelium. Our results support the value of harvested cell sheets for clinical applications in ocular reconstructive surgery in patients with ocular endothelial decompensation.

Cell Culture Techniques↗
PubMed2005

p57Kip2 is expressed in quiescent mouse bone marrow side population cells.

Hematopoietic stem cells can be accurately identified by the side population (SP) phenotype. It has been previously shown that hematopoietic stem cells are cell cycle arrested, but the mechanisms involved are currently poorly understood. In the present study, results from quantitative real-time RT-PCR show that while SP cells have increased expression of various cyclins and cyclin-dependent kinases, the increased expression of cyclin-dependent kinase inhibitors, in particular p57(Kip2), is responsible for the observed cell cycle arrest. In addition, gene expression analysis of c-kit(+/)/Sca-1(+)/Lineage- SP (KSL-SP) cells demonstrates that only p57(Kip2) shows both higher expression compared to both SP and non-SP cells. Furthermore, immunostaining also demonstrates significantly higher protein expression in KSL-SP cells. These results demonstrate that the maintenance of bone marrow SP cells in G0/G1 may be carefully controlled by p57(Kip2).

Animals↗
PubMed2005

Rat limbal epithelial side population cells exhibit a distinct expression of stem cell markers that are lacking in side population cells from the central cornea.

The side population (SP) phenotype is shared by stem cells in various tissues and species. Here we demonstrate SP cells with Hoechst dye efflux were surprisingly collected from the epithelia of both the rat limbus and central cornea, unlike in human and rabbit eyes. Our results show that rat limbal SP cells have a significantly higher expression of the stem cell markers ABCG2, nestin, and notch 1, compared to central corneal SP cells. Immunohistochemistry also revealed that ABCG2 and the epithelial stem/progenitor cell marker p63 were expressed only in basal limbal epithelial cells. These results demonstrate that ABCG2 expression is closely linked to the stem cell phenotype of SP cells.

ATP Binding Cassette Transporter, Subfamily G, Mem↗
PubMed2005

Limbal epithelial side-population cells have stem cell-like properties, including quiescent state.

Corneal epithelial (CE) stem cells are believed to reside in the basal layer of the limbal epithelium but remain poorly understood due to the lack of an accepted in vivo reconstitution assay as well as definitive markers for epithelial stem cells. It has been reported that side-population (SP) cells with the ability to efflux the DNA-binding dye Hoechst 33342 have stem cell-like properties and that the SP phenotype accurately represents a quiescent and immature stem cell population in the adult bone marrow. In the present study, we investigated whether SP cells isolated from the limbal epithelium have stem cell-like properties. SP cells, separated by fluorescence-activated cell sorting, comprise approximately 0.4% of all limbal epithelial cells and have markedly higher expression of the stem cell markers ABCG2, Bmi-1, and nestin but no expression of markers for differentiated CE cells compared with non-SP cells. Cell-cycle and telomerase activity analyses revealed that SP cells are growth arrested and reside in the quiescent state. Moreover, limbal epithelial SP cells did not demonstrate proliferative capabilities under typical in vitro epithelial cell culture conditions using 3T3 feeder layers. These findings present the possibility that quiescent limbal epithelial SP cells may represent an extremely immature stem cell population compared with currently defined epithelial stem or progenitor cells.

Animals↗
PubMed2005

Structural characterization of bioengineered human corneal endothelial cell sheets fabricated on temperature-responsive culture dishes.

For the purpose of corneal regenerative medicine, we fabricated human corneal endothelial cell sheets on temperature-responsive dishes, which could be non-invasively harvested as intact, transplantable sheets by simply reducing the culture temperature. Cells demonstrated hexagonal cell shape with numerous microvilli and cilia, and also exhibited abundant cytoplasmic organelles similar to these cells in vivo. Immunofluorescence for type IV collagen and fibronectin revealed that abundant extracellular matrix (ECM) was deposited on the basal surface throughout culture, and the deposited ECM was harvested along with the cell sheets by reducing culture temperature to 20 degrees C. Faint ECM remnants were observed on the dish surfaces after cell sheet detachment. Immunofluorescence for ZO-1 showed that tight junctions were established between cells, and immunoblotting indicated that intact ZO-1 was maintained during cell sheet harvest, while conventional proteolytic cell harvest methods resulted in the degradation of ZO-1. These results suggest that these transplantable corneal endothelial cell sheets can be applied to treat patients with damaged corneas.

Cell Culture Techniques↗