PubMed Health⌕ Search

Biomedical subjects

Mason B Tomson

Publications and source records attributed to Mason B Tomson.

3 recordsLinked to original sources

Adsorption and precipitation of an aminoalkylphosphonate onto calcite.

The mechanism of nitrilotris(methylenephosphonic acid) (H6NTMP)/calcite reaction was studied with a large number of batch experiments where phosphonic acid was neutralized with 0 to 5 equivalents of NaOH per phosphonic acid and the concentration ranged from about 10 nmol/L to 1 mol/L. It is proposed that the phosphonate/calcite reactions are characterized in three steps. At low phosphonate concentration (<1 micromol/L NTMP concentration), the phosphonate/calcite reaction can be characterized as a Langmuir isotherm. At saturation, only approximately 7% of the calcite surface is covered with phosphonate; presumably these are the kinks, step edges, or other imperfect sites. At higher phosphonate concentrations, the attachment is characterized by calcium phosphonate crystal growth to a maximum of four to five surface layer thick, with solid phase stoichiometry of Ca(2.5)HNTMP and a constant solubility product of 10(-24.11). After multiple layers of phosphonate are formed on the calcite surface, the solution is no longer at equilibrium with calcite. Further phosphonate retention is probably due to mixed calcium phosphonate solid phase formation at lower pH and depleted solution phase Ca conditions. The proposed mechanism is consistent with phosphate/calcite reaction and can be used to explain the fate of phosphonate in brines from oil producing wells and the results are compared with two oil wells.

Journal Article↗

Critical evaluation of desorption phenomena of heavy metals from natural sediments.

In natural sediments, the majority of heavy metal ions are generally associated with the solid phase. To become bioavailable, the metal ions must desorb from the solid. Numerous studies of heavy metals in sediments have suggested that sorption and desorption exhibit hysteresis (i.e., the two processes are not reversible), while other studies have suggested that desorption hysteresis does not exist. In this study, sorption/desorption hysteresis of lead (Pb) and cadmium (Cd) was evaluated over the following range of conditions: (i) desorption induced by replacing the supernatant liquid with contaminant-free electrolyte solution; (ii) desorption induced by lowering the solution pH with mineral acid; and (iii) desorption induced by sequestration with EDTA. Given the importance of dissolved organic and inorganic ligands in regulating heavy metal behavior in nature sediments, sorption/desorption experiments were conducted on both untreated and prewashed sediments. Prewashing treatment increases the sorption potential of Cd but not Pb. Desorption hysteresis is observed in both the untreated and the prewashed sediments using the replaced supernatant method, and the desorption hysteresis appears to increase with aging time. Hysteresis is not observed when desorption is initiated by lowering the solution pH. A large fraction of the sorbed heavy metal ions can be easily desorbed by EDTA; between 0.04 and 1.2 mmol/kg Cd and Pb ions are resistant to desorption.

Adsorption↗

A program for evaluating dual-equilibrium desorption effects on remediation.

Desorption is one of the most critical processes affecting the effectiveness of soil and ground water remediation. None of the currently adopted desorption models can accurately quantify desorption of low-hydrophobicity organic chemicals, and thus could potentially mislead remediation design and decision-making. A recently developed dual-equilibrium desorption (DED) model was found to be much more accurate in quantifying desorption. A screening-level transport model, DED-Transport, was developed to simulate the DED effect on behaviors of organic contaminant plumes during remediation. DED-Transport requires only simple parameters, but is applicable to many remediation scenarios. DED-Transport can be used as a decision-support tool in site remediation to more precisely predict the time required for cleanup.

Adsorption↗