Biomedical subjects

Mathew D Halls

Publications and source records attributed to Mathew D Halls.

7 recordsLinked to original sources

PubMed2006

Chemical failure modes of AlQ3-based OLEDs: AlQ3 hydrolysis.

Tris(8-hydroxyquinoline)aluminum(III), AlQ3, is used in organic light-emitting diodes (OLEDs) as an electron-transport material and emitting layer. The reaction of AlQ3 with trace H2O has been implicated as a major failure pathway for AlQ3-based OLEDs. Hybrid density functional calculations have been carried out to characterize the hydrolysis of AlQ3. The thermochemical and atomistic details for this important reaction are reported for both the neutral and oxidized AlQ3/AlQ3+ systems. In support of experimental conclusions, the neutral hydrolysis reaction pathway is found to be a thermally activated process, having a classical barrier height of 24.2 kcal mol(-1). First-principles infrared and electronic absorption spectra are compared to further characterize AlQ3 and the hydrolysis pathway product, AlQ2OH. The activation energy for the cationic AlQ3 hydrolysis pathway is found to be 8.5 kcal mol(-1) lower than for the neutral reaction, which is significant since it suggests a role for charge imbalance in promoting chemical failure modes in OLED devices.

Aluminum↗

PubMed2006

Hydrogen-bonding interactions in peptide nucleic acid and deoxyribonucleic acid: a comparative study.

Peptide nucleic acid (PNA) is a synthetic analogue of deoxyribonucleic acid (DNA) capable of tightly binding to itself and DNA with high specificity. Using hybrid density functional methods, hydrogen-bond (H-bond) strengths have been evaluated for isolated Watson-Crick base pairs, PNA base pairs, and charged as well as neutral DNA base pairs. Heterogeneous base pairs of PNA with charged and neutral DNA have also been investigated. The competing effects of short-range H-bonding and long-range Coulombic repulsions in charged DNA base pairs have been analyzed. Polarizable continuum models have been employed to evaluate solvation effects on the binding energies.

Base Composition↗

PubMed2005

Probing occupied states of the molecular layer in Au-alkanedithiol-GaAs diodes.

Internal photoemission (IPE) studies were performed on molecular diodes in which the alkanedithiol [HS(CH(2))(n)SH, n = 8, 10] molecular layer is sandwiched between Au and GaAs electrodes. The results are compared to those from Au-GaAs Schottky diodes. An exponential energy dependence in the IPE yield was observed for the molecular diodes, in contrast to the quadratic energy dependence characteristic of metal-semiconductor Schottky diodes, indicating that Au is not the source of electrons in the IPE process in the molecular diodes. From the GaAs dopant density dependence, we also can rule out GaAs being the source of these electrons. Compared with the results of cluster electronic structure calculations, we suggest that IPE is probing the occupied levels of GaAs-molecular interfacial states.

Alkanes↗

PubMed2005

Hafnium oxide and zirconium oxide atomic layer deposition: initial precursor and potential side-reaction product pathways with H/Si(100)-2 x 1.

Hybrid density functional calculations have been carried out using cluster models of the H/Si(100)-2 x 1 surface to investigate the mechanistic details of the initial surface reactions occurring in the atomic layer deposition of hafnium and zirconium oxides (HfO2 and ZrO2). Reaction pathways involving the metal precursors ZrCl4, Zr(CH3)4, HfCl4, and Hf(CH3)4 have been examined. Pathways leading to the formation of a Zr-Si or Hf-Si linkage show a significant sensitivity to the identity of the leaving group, with chloride loss reactions being both kinetically and thermodynamically less favorable than reactions leading to the loss of a methyl group. The energetics of the Zr(CH3)4 and Hf(CH3)4 reactions are similar with an overall exothermicity of 0.3-0.4 eV and a classical barrier height of 1.1-1.2 eV. For the reaction between H2O and the H/Si(100)-2 x 1 surface, the activation energy and overall reaction enthalpy are 1.6 and -0.8 eV, respectively. Due to contamination, trace amounts of H2O may be encountered by metal precursors, leading to the formation of minor species that can lead to unanticipated side-reaction pathways. Such gas-phase reactions between the halogenated and alkylated metal precursors and H2O are exothermic with small or no reaction barriers, allowing for the possibility of metal precursor hydroxylation before the H/Si surface is encountered. Of the contaminant surface reaction pathways, the most kinetically favorable corresponds to the surface -OH deposition. Interestingly, for the hydroxylated metal precursors, a unique reaction pathway resulting in the direct formation of Si-O-Zr and Si-O-Hf linkages has been identified and found to be the most thermodynamically stable pathway available, being exothermic by approximately 1.0 eV.

Journal Article↗

PubMed2005

Carbon nanotube inner phase chemistry: the Cl- exchange SN2 reaction.

Density functional calculations have been carried out to investigate the nature of the inner phase of a (6,6) carbon nanotube, using the Cl(-) exchange S(N)2 reaction as an indicator. Inside the carbon nanotube the classical barrier height increases by 6.6 kcal/mol due to the nanotube polarizability. This suggests that the inner phase environment can be considered a form of solid solvation, offering the possibility of obtaining altered guest properties and reactivity through dielectric stabilization.

Journal Article↗

PubMed2003

Water alignment and proton conduction inside carbon nanotubes.

First-principles molecular dynamics simulations have been carried out to investigate the structure, electronic properties, and proton conductivity of water confined inside single-walled carbon nanotubes. The simulations predict the formation of a strongly connected one-dimensional hydrogen-bonded water wire resulting in a net electric dipole moment directed along the nanotube axis. An excess proton injected into the water wire is found to be significantly stabilized, relative to the gas phase, due to the high polarizability of the carbon nanotube.

Biomimetic Materials↗

PubMed2002

Noncovalent engineering of carbon nanotube surfaces by rigid, functional conjugated polymers.

We report a new nonwrapping approach to noncovalent engineering of carbon nanotube surfaces by short, rigid functional conjugated polymers, poly(aryleneethynylene)s. Our technique not only enables the dissolution of various types of carbon nanotubes in organic solvents, which represents the first example of solubilization of carbon nanotubes via pi-stacking without polymer wrapping, but could also introduce numerous neutral and ionic functional groups onto the carbon nanotube surfaces.

Journal Article↗