PubMed Health⌕ Search

Biomedical subjects

Mats Larhed

Publications and source records attributed to Mats Larhed.

At least 19 recordsLinked to original sources

ESI-MS detection of proposed reaction intermediates in the air-promoted and ligand-modulated oxidative Heck reaction.

Electrospray ionization mass spectrometry (ESI-MS) and subsequent MS/MS analyses were used to directly detect palladium-containing cationic reaction intermediates in a ligand controlled palladium(II)-catalyzed oxidative Heck arylation. All potential intermediates were observed as dmphen-ligated palladium(II) species, suggesting that the dmphen bidentate ligand is attached to the metal center during the entire catalytic cycle. The study supports previous mechanistic propositions and provides new information regarding the composition of aryl-containing Pd(II) complexes in an ongoing oxidative Heck reaction. In addition, sodium acetate was found to be a useful base alternative to previously used tertiary amines.

Air↗

Selective terminal heck arylation of vinyl ethers with aryl chlorides: a combined experimental-computational approach including synthesis of betaxolol.

Reaction conditions have been developed for palladium-catalyzed terminal (beta-) arylation of acyclic vinyl ethers with high regioselectivity using inexpensive aryl chlorides as starting materials and the P(t-Bu)3 releasing preligand [(t-Bu3)PH]BF4 as the key additive. This swift and straightforward protocol exploits non-inert conditions and controlled microwave heating to minimize handling and processing times and uses aqueous DMF or environmentally friendly PEG-200 as the reaction medium. The selectivity for linear beta-product in PEG-200 is slightly higher than in aqueous DMF. DFT calculations support a ligand-driven selectivity rationale, where the electronic and steric influence of bulky P(t-Bu)3 ligand provides improved beta-selectivity in the essential insertion step also with electron-rich aryl chlorides. A tentative computational rationalization of the improved selectivity in non-methylated PEG is discussed. Finally the synthetic methodology was used to provide efficient access to linear p-[2-(cyclopropylmethoxy)ethyl] phenol from p-nitrophenyl chloride, a key intermediate in the synthesis of the beta-adrenergic blocking agent Betaxolol.

Betaxolol↗

A new structural theme in C2-symmetric HIV-1 protease inhibitors: ortho-substituted P1/P1' side chains.

In this report, the rapid syntheses of 24 novel C2-symmetric HIV-1 protease inhibitors are described. Two ortho-iodobenzyloxy containing C-terminal duplicated inhibitors served as starting materials for microwave-enhanced palladium(0)-catalyzed carbon-carbon bond forming reactions (Suzuki, Sonogashira, Heck, and Negishi). Highly potent inhibitors equipped with ortho-functionalized P1/P1' side chains as the structural theme were identified. Computational efforts were applied to study the binding mode of this class of inhibitors and to establish structure-activity relationships. The overall orientation of the inhibitors in the active site was reproduced by docking which suggested three possible conformations of the P1/P1' groups of which two seem more plausible.

Amides↗

Microwave-accelerated synthesis of P1'-extended HIV-1 protease inhibitors encompassing a tertiary alcohol in the transition-state mimicking scaffold.

Two series of P1'-extended HIV-1 protease inhibitors comprising a tertiary alcohol in the transition-state mimic exhibiting Ki values ranging from 2.1 to 93 nM have been synthesized. Microwave-accelerated palladium-catalyzed cross-couplings were utilized to rapidly optimize the P1' side chain. High cellular antiviral potencies were encountered when the P1' benzyl group was elongated with a 3- or 4-pyridyl substituent (EC50 = 0.18-0.22 microM). X-ray crystallographic data were obtained for three inhibitors cocrystallized with the enzyme.

Alcohols↗

Stereoselective synthesis of 3-aminoindan-1-ones and subsequent incorporation into HIV-1 protease inhibitors.

A new method for the stereoselective synthesis of 3-aminoindan-1-ones from triflates of salicylic sulfinyl imines and ethylene glycol vinyl ether has been developed. The reaction sequence starts with a regioselective Heck reaction followed by stereoselective Lewis acid mediated annulation. Acidic cleavage of the sulfinamides produced pure (R)- and (S)-3-aminoindan-1-ones, which were successfully isolated and incorporated into active HIV-1 protease inhibitors.

HIV Protease Inhibitors↗

Angiotensin II pseudopeptides containing 1,3,5-trisubstituted benzene scaffolds with high AT2 receptor affinity.

Two 1,3,5-trisubstituted aromatic scaffolds intended to serve as gamma-turn mimetics have been synthesized and incorporated in five pseudopeptide analogues of angiotensin II (Asp-Arg-Val-Tyr-Ile-His-Pro-Phe), replacing Val-Tyr-Ile, Val-Tyr, or Tyr-Ile. All the tested compounds exhibited nanomolar affinity for the AT2 receptor with the best compound (3) having a K(i) of 1.85 nM. Four pseudopeptides were AT2 selective, while one (5) also exhibited good affinity for the AT1 receptor (K(i) = 30.3 nM). This pseudopeptide exerted full agonistic activity in an AT2 receptor induced neurite outgrowth assay but displayed no agonistic effect in an AT1 receptor functional assay. Molecular modeling, using the program DISCOtech, showed that the high-affinity ligands could interact similarly with the AT2 receptor as other ligands with high affinity for this receptor. A tentative agonist model is proposed for AT2 receptor activation by angiotensin II analogues. We conclude that the 1,3,5-trisubstituted benzene rings can be conveniently prepared and are suitable as gamma-turn mimics.

Angiotensin II↗

Microwave-enhanced aminocarbonylations in water.

[reaction: see text]. Aryl bromides can be rapidly converted to the corresponding secondary and tertiary benzamides in water. By using Mo(CO)6 as the source of carbon monoxide, aminocarbonylations were conducted under air after only 10 min of high-density microwave heating.

Journal Article↗

A one-pot isomerization-arylation of 2,3-epoxycyclohexanone under controlled microwave heating.

A fast one-pot method has been developed for the direct preparation of 3-aryl-1,2-cyclohexanediones from 2,3-epoxycyclohexanone via a microwave-assisted tandem epoxy ketone isomerization-Heck arylation reaction. The preparative microwave-assisted reactions were performed preferentially in 50% aqueous poly(ethylene glycol) utilizing sodium acetate as the base. Within 5-30 min of directed microwave heating, employing less than 0.05 mol % of palladium acetate and no phosphine ligand, up to 72% yield of C3-arylated diketones was isolated in an overall environmentally benign process. On the basis of the chemical reactivity of proposed intermediates, a reaction pathway is proposed where the acetate base promotes the rearrangement of the 2,3-epoxycyclohexanone into the active mono-enol form of 1,2-cyclohexanedione. An alternative classically heated procedure for isomerization-C3-arylation of 2,3-epoxycyclohexanone in DMF is also reported.

Journal Article↗

Easy-to-execute carbonylations: microwave synthesis of acyl sulfonamides using Mo(CO)(6) as a solid carbon monoxide source.

The development of a robust palladium-catalyzed amidocarbonylation protocol for the preparation of aromatic acyl sulfonamides utilizing high-density microwave heating is described. This synthetic approach employs Mo(CO)(6) as a convenient CO-releasing reagent and allows for the direct preparation of acyl sulfonamides from both aryl iodides and aryl bromides. The reactions can be performed under air, employing only 15 min of microwave irradiation, to produce acyl sulfonamide derivatives in good to excellent yields. To illustrate the usefulness of this method, we reported the synthesis of a novel hepatitis C virus NS3 protease inhibitor.

Carbon Monoxide↗

Masked 3-aminoindan-1-ones by a palladium-catalyzed three-component annulation reaction.

A new palladium(0)-catalyzed three-component reaction involving a set of salicylic aldehyde triflates, ethylene glycol vinyl ether, and various secondary nucleophilic amines has been developed. Through systematic optimization experiments using multivariate design, the conditions effecting robust and convenient one-pot generation of protected 3-aminoindan-1-ones were identified. A reaction route involving an initial internal Heck arylation of the hydroxyalkyl vinyl ether, iminium ion formation, and subsequent tandem cyclization is invoked to explain the selective formation of the isolated tertiary 3-aminoindan acetals. Hydrogenolysis of orthogonally blocked 3-aminoindan-1-ones delivered primary or secondary amines after 10-20 min of microwave heating.

Journal Article↗

Microwave-enhanced carbonylative generation of indanones and 3-acylaminoindanones.

The development of microwave-accelerated protocols for palladium(0)-catalyzed carbonylative cyclization of unsaturated aryl bromides and chlorides is described. By employing o-bromostyryl derivatives lacking substituents on the vinylic bond, molybdenum hexacarbonyl-mediated in situ carbonylation delivered a set of indan-1-one products in high yield after only 20 min of heating. Without the addition of the tri-tert-butylphosphine releasing Fu-salt ((t-Bu)(3)PHBF(4)), only incomplete conversions of sluggish o-styryl bromides and chlorides were realized. Internal and chemoselective palladium(0)-catalyzed Heck arylations of enamides afforded suitable starting materials for subsequent rapid ring-closing reactions. Microwave-heated intramolecular in situ carbonylation of these electron-rich and sterically congested olefins conveniently afforded eight functionalized 3-acylaminoindanone derivatives in a novel synthetic process. Attempted carbonylative annulation of electron-poor o-bromocinnamic acid derivatives furnished only the corresponding lactones via a competing hydroxycarbonylation-Michael addition reaction sequence.

Journal Article↗

Dioxygen-promoted regioselective oxidative heck arylations of electron-rich olefins with arylboronic acids.

Arylations of electron-rich heteroatom-substituted olefins were performed with arylboronic acids. This appears to constitute the first example of palladium(II)-catalyzed internal Heck arylations. The novel protocol exploits oxygen gas for environmentally benign reoxidation and a stable 1,10-phenanthroline bidentate ligand to promote the palladium(II) regeneration and to control the regioselectivity. Internal arylation is strongly favored with electron-rich arylboronic acids. DFT calculations support a charge-driven selectivity rationale, where phenyls substituted with electron-donating groups prefer the electron-poor alpha-carbon of the olefin. Experiments, verified by calculations, confirm the cationic nature of the catalytic route. This Heck methodology provides a facile and mild access to functionalized enamides. Controlled microwave heating and increased oxygen pressure were used to further reduce the reaction time to 1 h.

Journal Article↗

Microwave-promoted and chelation-controlled double arylations of terminal olefinic carbon of vinyl ethers.

Herein we report a rapid, palladium-catalyzed terminal diarylation of the chelating olefin N,N-dimethyl(2-ethenyloxy)ethanamine under noninert conditions utilizing controlled microwave heating as a convenient energy source. Among the aryl bromides examined, both electron-rich and electron-poor substrates were demonstrated to furnish useful yields after only 10-120 min of directed microwave heating at 160-200 degrees C. The good terminal regioselectivity suggests that the precatalyst (Herrmann's palladacycle) serves as a source of weakly coordinated palladium(0) in the investigated high-temperature Heck process.

Journal Article↗

Microwave-enhanced medicinal chemistry: a high-speed opportunity for convenient preparation of protease inhibitors.

The unique properties of microwave in situ heating offer unparalleled opportunities for medicinal chemists to accelerate lead optimization processes in early drug discovery. The technology is ideal for palladium-catalyzed alteration chemistry as it allows for complete control over reactions, with the use of non-inert conditions, providing high chemoselectivity and rapid feedback. To illustrate the advantages of this methodology, we describe our applications and approaches for the rapid synthesis of novel aspartyl protease inhibitors using dedicated microwave equipment. Biological results from chemical studies of the different side-chain positions of HIV-1 and malarial plasmepsin I and II protease inhibitors are summarized.

Aspartic Acid Endopeptidases↗