PubMed Health⌕ Search

Biomedical subjects

Matt Law

Publications and source records attributed to Matt Law.

11 recordsLinked to original sources
PubMed2006

ZnO-Al2O3 and ZnO-TiO2 core-shell nanowire dye-sensitized solar cells.

We describe the construction and performance of dye-sensitized solar cells (DSCs) based on arrays of ZnO nanowires coated with thin shells of amorphous Al(2)O(3) or anatase TiO(2) by atomic layer deposition. We find that alumina shells of all thicknesses act as insulating barriers that improve cell open-circuit voltage (V(OC)) only at the expense of a larger decrease in short-circuit current density (J(SC)). However, titania shells 10-25 nm in thickness cause a dramatic increase in V(OC) and fill factor with little current falloff, resulting in a substantial improvement in overall conversion efficiency, up to 2.25% under 100 mW cm(-2) AM 1.5 simulated sunlight. The superior performance of the ZnO-TiO(2) core-shell nanowire cells is a result of a radial surface field within each nanowire that decreases the rate of recombination in these devices. In a related set of experiments, we have found that TiO(2) blocking layers deposited underneath the nanowire films yield cells with reduced efficiency, in contrast to the beneficial use of blocking layers in some TiO(2) nanoparticle cells. Raising the efficiency of our nanowire DSCs above 2.5% depends on achieving higher dye loadings through an increase in nanowire array surface area.

Journal Article↗
PubMed2006

Solution-grown zinc oxide nanowires.

We review two strategies for growing ZnO nanowires from zinc salts in aqueous and organic solvents. Wire arrays with diameters in the nanoscale regime can be grown in an aqueous solution of zinc nitrate and hexamethylenetetramine. With the addition of poly(ethylenimine), the lengths of the wires have been increased to 25 mum with aspect ratios over 125. Additionally, these arrays were made vertical by nucleating the wires from oriented ZnO nanocrystals. ZnO nanowire bundles have been produced by decomposing zinc acetate in trioctylamine. By the addition of a metal salt to the solution, the ZnO wires can be doped with a range of transition metals. Specifically, ZnO nanowires were homogeneously doped with cobalt and showed a marked deviation from paramagnetic behavior. We conclude by highlighting the use of these solution-grown nanowire arrays in dye-sensitized solar cells. The nanowire cells showed an improvement in the charge collection efficiency over traditional nanoparticle cells.

Journal Article↗
PubMed2005

Semiconductor nanowires for subwavelength photonics integration.

This article focuses on one-dimensional (1D) semiconductor subwavelength optical elements and assesses their potential use as active and passive components in photonic devices. An updated overview of their optical properties, including spontaneous emission, ultrafast carrier dynamics, cavity resonance feedback (lasing), photodetection, and waveguiding, is provided. The ability to physically manipulate these structures on surfaces to form simple networks and assemblies is the first step toward integrating chemically synthesized nanomaterials into photonic circuitry. These high index semiconductor nanowires are capable of efficiently guiding light through liquid media, suggesting a role for such materials in microfluidics-based biosensing applications.

Journal Article↗
PubMed2005

Optical routing and sensing with nanowire assemblies.

The manipulation of photons in structures smaller than the wavelength of light is central to the development of nanoscale integrated photonic systems for computing, communications, and sensing. We assemble small groups of freestanding, chemically synthesized nanoribbons and nanowires into model structures that illustrate how light is exchanged between subwavelength cavities made of three different semiconductors. The coupling strength of the optical linkages formed when nanowires are brought into contact depends both on their volume of interaction and angle of intersection. With simple coupling schemes, lasing nanowires can launch coherent pulses of light through ribbon waveguides that are up to a millimeter in length. Also, interwire coupling losses are low enough to allow light to propagate across several right-angle bends in a grid of crossed ribbons. The fraction of the guided wave traveling outside the wire/ribbon cavities is used to link nanowires through space and to separate colors within multiribbon networks. In addition, we find that nanoribbons function efficiently as waveguides in liquid media and provide a unique means for probing molecules in solution or in proximity to the waveguide surface. Our results lay the spadework for photonic devices based on assemblies of active and passive nanowire elements and presage the use of nanowire waveguides in microfluidics and biology.

Journal Article↗
PubMed2005

Nanowire dye-sensitized solar cells.

Excitonic solar cells-including organic, hybrid organic-inorganic and dye-sensitized cells (DSCs)-are promising devices for inexpensive, large-scale solar energy conversion. The DSC is currently the most efficient and stable excitonic photocell. Central to this device is a thick nanoparticle film that provides a large surface area for the adsorption of light-harvesting molecules. However, nanoparticle DSCs rely on trap-limited diffusion for electron transport, a slow mechanism that can limit device efficiency, especially at longer wavelengths. Here we introduce a version of the dye-sensitized cell in which the traditional nanoparticle film is replaced by a dense array of oriented, crystalline ZnO nanowires. The nanowire anode is synthesized by mild aqueous chemistry and features a surface area up to one-fifth as large as a nanoparticle cell. The direct electrical pathways provided by the nanowires ensure the rapid collection of carriers generated throughout the device, and a full Sun efficiency of 1.5% is demonstrated, limited primarily by the surface area of the nanowire array.

Coloring Agents↗
PubMed2005

ZnO nanowire transistors.

ZnO nanowire field-effect transistors (FETs) were fabricated and studied in vacuum and a variety of ambient gases from 5 to 300 K. In air, these n-type nanowire transistors have among the highest mobilities yet reported for ZnO FETs (mu(e) = 13 +/- 5 cm(2) V(-1) s(-1)), with carrier concentrations averaging 5.2 +/- 2.5 x 10(17) cm(-3) and on-off current ratios ranging from 10(5) to 10(7). Four probe measurements show that the resistivity of the Ti/Au-ZnO contacts is 0.002-0.02 Omega.cm. The performance characteristics of the nanowire transistors are intimately tied to the presence and nature of adsorbed surface species. In addition, we describe a dynamic gate effect that seems to involve mobile surface charges and causes hysteresis in the transconductance, among other effects.

Nanowires↗
PubMed2005

Thermally driven interfacial dynamics of metal/oxide bilayer nanoribbons.

Solid-solid interfacial processes greatly affect the performance of electronic and composite materials, but probing the dynamics of buried interfaces is challenging and often involves lengthy or invasive sample preparation. We show that bilayer nanoribbons-made here of tin dioxide and copper-are convenient structures for observing as-made interfaces as they respond to changing temperature in a transmission electron microscope (TEM). At low temperatures (<200 degrees C), differential thermal expansion causes the bilayers to bend when heated or cooled, with the motion determined by the extent of Cu-SnO(2) epitaxy. At higher temperatures, we are able to watch-in real time and with nanometer resolution-a progression of grain growth, interdiffusion, island formation, solid-state chemical reactions, and melting. This novel TEM geometry is readily applicable to other nanoribbon/coating combinations and is well suited to observing interfacial phenomena driven thermally or by the application of mechanical, electrical, or magnetic forces.

Alloys↗
PubMed2005

General route to vertical ZnO nanowire arrays using textured ZnO seeds.

A method for growing vertical ZnO nanowire arrays on arbitrary substrates using either gas-phase or solution-phase approaches is presented. A approximately 10 nm-thick layer of textured ZnO nanocrystals with their c axes normal to the substrate is formed by the decomposition of zinc acetate at 200-350 degrees C to provide nucleation sites for vertical nanowire growth. The nanorod arrays made in solution have a rod diameter, length, density, and orientation desirable for use in ordered nanorod-polymer solar cells.

Anisotropy↗
PubMed2004

Nanoribbon waveguides for subwavelength photonics integration.

Although the electrical integration of chemically synthesized nanowires has been achieved with lithography, optical integration, which promises high speeds and greater device versatility, remains unexplored. We describe the properties and functions of individual crystalline oxide nanoribbons that act as subwavelength optical waveguides and assess their applicability as nanoscale photonic elements. The length, flexibility, and strength of these structures enable their manipulation on surfaces, including the optical linking of nanoribbon waveguides and other nanowire elements to form networks and device components. We demonstrate the assembly of ribbon waveguides with nanowire light sources and detectors as a first step toward building nanowire photonic circuitry.

Journal Article↗