Biomedical subjects

Matthew J Dalby

Publications and source records attributed to Matthew J Dalby.

16 recordsLinked to original sources

PubMed2007

Nanotopographical stimulation of mechanotransduction and changes in interphase centromere positioning.

We apply a recently developed method for controlling the spreading of cultured cells using electron beam lithography (EBL) to create polymethylmethacrylate (PMMA) substrata with repeating nanostructures. There are indications that the reduced cell spreading on these substrata, compared with planar PMMA, results from a reduced adhesivity since there are fewer adhesive structures and fewer of their associated stress fibres. The reduced cell spreading also results in a reduced nuclear area and a closer spacing of centrosomes within the nucleus, suggesting that the tension applied to the nucleus is reduced as would be expected from the reduction in stress fibres. In order to obtain further evidence for this, we have used specific inhibitors of components of the cytoskeleton and have found effects comparable with those induced by the new substrata. We have also obtained evidence that these subtrata result in downregulation of gene expression which suggests that this may be due to the changed tension on the nucleus: an intriguing possibility that merits further investigation.

Cell Adhesion↗

PubMed2006

Group analysis of regulation of fibroblast genome on low-adhesion nanostructures.

Nanotopographical material modification represents a possible way of producing surfaces that influence cellular adhesion for biomaterials purposes. Here, two low-adhesion surfaces are studied with human genome microarrays (120nm diameter pits produced by electron beam lithography and 11nm high columns produced by colloidal lithography). In order to present the large numbers of results produced in a succinct and easy to understand manner, two types of recent bioinformatics methods were used; iterative group analysis and Ingenuity pathway analysis. These methods allowed the easy comparison of the nanomaterials and showed large-scale changes in areas of extracellular matrix, cell signalling and inflammation. The results demonstrate that whilst modes of cellular response to low-adhesion materials are similar, the more adhesion is reduced, the further 'shut-down' of critical cellular activities is observed. We also feel that the analysis used could be of interest to biomaterials scientists looking for easy ways to display microarray data efficiently.

Adhesiveness↗

PubMed2006

Nanoprinting onto cells.

Growing cells on surfaces bearing nanotopography signals makes many changes in cell gene expression and downstream changes in phenotype but the mechanisms for this have, so far, been obscure. We consider the question of whether the topography directly nanoimprints onto the cell as a component of the signal transduction system. Evidence we present from SEM, TEM and fluorescence detection of the arrangements of cytoskeletal components is consistent with the possibility that cells are nanoimprinted by the substrate. The nanoprinting does not interfere with integrin-mediated adhesion processes and may perhaps work through them. Time-lapse video studies of cells moving from areas bearing nanotopography to flat areas and vice versa suggests that the nanoimprinting takes 1-6h to appear on the cell and a similar time to disappear when the cell moves from a flat surface to a nanotopographic one and back. This nanoprinting of cells would appear to be a novel type of cell signalling.

Cell Movement↗

PubMed2005

The fibroblast response to tubes exhibiting internal nanotopography.

The use of three-dimensional scaffolds in cell and tissue engineering is widespread; however, the use of such scaffolds, which bear additional cellular cues such as nanotopography, is as yet in its infancy. This paper details the novel fabrication of nylon tubes bearing nanotopography via polymer demixing, and reports that the topography greatly influenced fibroblast adhesion, spreading, morphology and cytoskeletal organisation. The use of such frameworks that convey both the correct mechanical support for tissue formation and stimulate cells through topographical cues may pave the way for future production of intelligent materials and scaffolds.

Biocompatible Materials↗

PubMed2005

Topographically induced direct cell mechanotransduction.

This review is designed to introduce the cytoskeleton and then discuss how mechanical forces may be transduced to the cell nucleus. In addition to this, it also tries to explain current thinking as to how the nucleus turns these mechanical cues into gene changes and is especially interested in mechanotransduction arising from topographically induced morphological changes, specifically nanotopography. Thus, this review also describes cell responses to topography.

Animals↗

PubMed2004

Fibroblast response to a controlled nanoenvironment produced by colloidal lithography.

It is thought that by understanding how cells respond to topography, that better tissue engineering may be achievable. An important consideration in the cellular environment is topography. The effects of microtopography have been well documented, but the effects of nanotopography are less well known. Previously, methods of nanofabrication have been costly and time-consuming, but research by engineers, physicists, and chemists is starting to allow the production of nanostructures using low-cost techniques. In this report, nanotopography is specifically considered. Controlled patterns of 160 nm high nanocolumns were produced for in vitro cell culture using colloidal lithography. By studying cell adhesion with time and cytoskeletal (actin, tubulin, and vimentin) maturity, insight has been gained as to how fibroblasts adhere to these nanofeatures.

Actins↗

PubMed2004

Attempted endocytosis of nano-environment produced by colloidal lithography by human fibroblasts.

Control of the cells' nanoenvironment is likely to be important in the future of cell and tissue engineering. Microtopography has been shown to provide cues to cells that elicit a large range of cell responses, including control of adhesion, morphology, apoptosis and gene regulations. Now, researchers are focusing on nanotopography as techniques such as colloidal and electron beam lithography and polymer demixing have become available. In this study, human fibroblast response to nanocolumns (160-nm high, 100-nm diameter, 230-nm centre-centre spacing) produced by colloidal lithography are considered. Using electron microscopy and immunofluorescence to image the cytoskeleton, clathrin and dynamin, it was observed that the cells try to endocytose the nanocolumns. It also appeared that a small population of the cells changed to unusual morphologies with macrophage-like processes and highly disrupted cytoskeleton. These observations could have implications for nanomaterials science in areas such as cell transfection and drug delivery.

Actins↗

PubMed2004

The influence of transferrin stabilised magnetic nanoparticles on human dermal fibroblasts in culture.

Magnetic nanoparticles have been used for bio-medical purposes including drug delivery, cell destruction and as MRI contrast agents for several years. A more recent biological application has focused on targeted drug delivery. To this end, a wide variety of iron oxide nanoparticles have been synthesised. This study involves the use of magnetic nanoparticles synthesised and derivatised with human transferrin, compared to identical underivatised particles. Human fibroblasts were used, representative of a tissue cell-type. The influence in vitro was determined using light and fluorescence microscopy, scanning and transmission electron microscopy, and 1718 gene microarray. The results indicate that the transferrin derivatised particles appear to localise to the cell membrane without instigating receptor-mediated endocytosis, and also induce up-regulation in the cells for many genes, particularly in the area of cytoskeleton and cell signalling. The microscopy results further support these findings.

Antigens, CD↗

PubMed2004

Investigating filopodia sensing using arrays of defined nano-pits down to 35 nm diameter in size.

In order for cells to react to topography, they must be able to sense shape. When considering nano-topography, these shapes are much smaller than the cell, but still strong responses to nano-topography have been seen. Filopodia, or microspikes, presented by cells at their leading edges are thought to be involved in gathering of special information. In order to investigate this, and to develop an understanding of what size of feature can be sensed by cells, morphological observation (electron and fluorescent microscopy) of fibroblasts reacting to nano-pits with 35, 75 and 120 nm diameters has been used in this study. The nano-pits are especially interesting because unlike many of the nanofeatures cited in the literature, they have no height for the cells to react to. The results showed that cell filopodia, and retraction fibres, interacted with all pit sizes, although direct interaction was hard to image on the 35 nm pits. This suggests that cells are extremely sensitive to their nanoevironment and that should be taken in to consideration when designing next-generation tissue engineering materials. We suggest that this may occur through nanocontact guidance as filopodia are moved over the pits.

Cells, Cultured↗

PubMed2004

Use of nanotopography to study mechanotransduction in fibroblasts--methods and perspectives.

The environment around a cell during in vitro culture is unlikely to mimic those in vivo. Preliminary experiments with nanotopography have shown that nanoscale features can strongly influence cell morphology, adhesion, proliferation and gene regulation, but the mechanisms mediating this cell response remain unclear. In this perspective article, we attempt to illustrate that a possible mechanism is direct transmittal of forces encountered by cells during spreading to the nucleus via the cytoskeleton. We further try to illustrate that this 'self-induced' mechanotransduction may alter gene expression by changing interphase chromosome positioning. Whilst the observations described here to show how we think nanotopography can be developed as a tool to look at mechanotransduction are preliminary, we feel they indicate that topography may give cell biologists a non-invasive tool with which to investigate in vitro cellular mechanisms.

Animals↗

PubMed2003

Nucleus alignment and cell signaling in fibroblasts: response to a micro-grooved topography.

Cellular response to scaffold materials is of great importance in cellular and tissue engineering, and it is perhaps the initial cell contact with the scaffold that determines development of new tissue. Material surface morphology has strong effects on cell cytoskeleton and morphology, and it is thought that cells may react to the topography of collagen and surrounding cells during tissue embryology. A poorly understood area is, however, gene-level responses to topography. Thus, this paper used microarray to probe for consistent gene changes in response to lithographically produced topography (12.5 x 2-microm grooves) with time. The results showed many initial gene changes and also down-regulation of gene response with time. Cell and nucleus morphology were also considered, with nuclear deformation linked to cell signaling.

Cell Adhesion↗

PubMed2003

In vitro cellular response to titanium electrochemically coated with hydroxyapatite compared to titanium with three different levels of surface roughness.

The in vitro response of primary human osteoblast-like (HOB) cells to a novel hydroxyapatite (HA) coated titanium substrate, produced by a low temperature electrochemical method, was compared to three different titanium surfaces: as-machined, Al(2)O(3)-blasted, plasma-sprayed with titanium particles. HOB cells were cultured on different surfaces for 3, 7 and 14 days at 37 degrees C. The cell morphology was assessed using scanning electron microscopy (SEM). Cell growth and proliferation were assessed by the measurement of total cellular DNA and tritiated thymidine incorporation. Measurement of alkaline phosphatase (ALP) production was used as an indicator of the phenotype of the cultured HOB cells. After three days incubation, the electrochemically coated HA surface produced the highest level of cell proliferation, and the Al(2)O(3)-blasted surface the lowest. Interestingly, as the incubation time was increased to 7 days all surfaces produced a large drop in tritiated thymidine incorporation apart from the Al(2)O(3)-blasted surface, which showed a small increase. Cells cultured on all four surfaces showed an increased expression of ALP with increased incubation time, although there was not a statistically significant difference between surfaces at each time point. Typical osteoblast morphology was observed for cells cultured on all samples. The HA coated sample showed evidence of a deposited phase after three days of incubation, which was not observed on any other surface. Cells incubated on the HA coated substrate appeared to exhibit the highest number of cell processes attaching to the surface, which was indicative of optimal cell attachment. The crystalline HA coating, produced by a low temperature route, appeared to result in a more bioactive surface on the c.p. Ti substrate than was observed for the other three different Ti surfaces.

Journal Article↗

PubMed2002

Increasing fibroblast response to materials using nanotopography: morphological and genetic measurements of cell response to 13-nm-high polymer demixed islands.

It is becoming clear that cells can respond not only to micometric scale topography, but may also to nanometric scale topography. The production of reproducibly sized nanometric features has relied heavily on expensive and time-consuming methods of manufacture, such as electron beam lithography. Polymer demixing of polystyrene and polybromostyrene has been found to produce nanoscale islands of reproducible height, and the islands have been previously shown to effect cell spreading compared to planar surfaces. This study observes morphological, cytoskeletal, and molecular changes in fibroblast reaction to 13-nm-high islands. The methods employed include scanning electron microscopy, fluorescent microscopy, and 1718 gene microarray. The results show that the cells respond to the islands by broad gene up-regulation, notably in the areas of cell signaling, proliferation, cytoskeleton, and production of extracellular matrix proteins. Microscopical results provide confirmation of the microarray findings.

Biocompatible Materials↗

PubMed2002

Optimizing HAPEX topography influences osteoblast response.

HAPEX (hydroxyapatite-reinforced polyethylene composite) is a second-generation orthopedic biomaterial designed as a bone analog material, which has found clinical success. The use of topography in cell engineering has been shown to affect cell attachment and subsequent response. Thus, by combining bioactivity and enhancing osteoblast response to the implant surface, improved tissue repair and implant life span may be achieved. In this study a primary human osteoblast-like cell model has been used to study the influence of surface topography and chemistry produced by three different production methods. Scanning electron microscopy, fluorescence microscopy, and confocal scanning laser microscopy have been used to study cell adhesion; tritiated thymidine uptake has been used to observe cell proliferation; and the reverse transcriptase-polymerase chain reaction and biochemical methods have been used to study phenotypic expression. Transmission electron microscopy has also been used to look at more long-term morphology. The results show that topography significantly influences cell response, and may be a means of enhancing bone apposition on HAPEX.

Alkaline Phosphatase↗

PubMed2002

Fibroblast signaling events in response to nanotopography: a gene array study.

When considering the complicated nature of cell/tissue interactions with biomaterials, especially materials with nanometric surface features, observation of changes in one or two selected genes or proteins may not be sufficient. To get a fuller understanding of the scope of responses effected by nanotopography on cells, many genes need to be surveyed. Recent developments in molecular biology have lead to the commercial production of microarrays. Microarray presents a powerful tool by which many genes (up to many thousands) can be probed simultaneously. In this study, 1718 gene arrays have been used to measure human fibroblast response to 13-nm-high polymer demixed islands. The results have shown many changes in genes involved in signaling, cytoskeleton, extracellular matrix, gene transcription, and protein translation; these results have been used to build a more complete overview of fibroblast response to the islands. The use of microarray has expanded the range of observations possible using established microscopical and biochemical techniques.

Cell Culture Techniques↗

PubMed2002

Interactions of human blood and tissue cell types with 95-nm-high nanotopography.

Two of the major concerns for tissue engineering materials are inflammatory responses from blood cells and fibrous encapsulation by the body in order to shield the implant from blood reaction. A further hurdle is that of vascularization. In order to develop new tissues, or to repair parts of the vascular system, nutrients need to be carried to the basal cell layers. If a material promotes tissue formation, but not vascularization, necrosis will be observed as multilayered cells develop. In this paper, polymer demixed island topography with a 95-nm Z axis was tested using human mononuclear blood cells, platelets, fibroblasts, and endothelial cells. The results showed no difference in blood response between the islands and the flat controls, suggesting that in vivo there would be negligible immunological difference. Fibroblasts reacted by changing morphology into a rounded shape with thick processes and poorly developed cytoskeleton. Retardation of fibroblast growth may be an advantageous, as it is this cell type that forms the fibrous capsule, preventing growth of the required tissue type. Finally, endothelial cells were seen to form arcuate, or curved, morphologies in response to the islands. This is the normal, in vivo, morphology for vascular endothelium. This result suggests that the nano-features are promoting a more phenotypically correct morphology.

Cell Culture Techniques↗