Biomedical subjects

Matthias Seydack

Publications and source records attributed to Matthias Seydack.

6 recordsLinked to original sources

PubMed2006

A highly sensitive fluorescent immunoassay based on avidin-labeled nanocrystals.

Nanocrystals of the fluorogenic precursor fluorescein diacetate (FDA) were applied as labels in order to improve on the assay sensitivity achieved in our previous studies. Each FDA nanocrystal can be converted into approximately 2.6x10(6) fluorescein molecules, which is useful for improving immunoassay sensitivity and limits of detection. NeutrAvidin was simply adsorbed onto the surface of the FDA nanocrystals, which were coated with distearoylglycerophosphoethanolamine (DSPE) modified with amino(poly(ethylene glycol))(PEG(2000)-Amine) as an interface for coupling biomolecules. This can be applied to detect different kinds of analytes that are captured by corresponding biotinylated biomolecules in different bioanalytical applications. The applicability of the NeutrAvidin-labeled nanocrystals was demonstrated in an immunoassay using the labeled avidin-biotin technique. Biotinylated antibody and FDA-labeled avidin were applied to the assay sequentially. The performance was compared with the traditional sandwich-type assay for mouse immunoglobulin G detection. Following the immunoreaction, the nanocrystals were released by hydrolysis and dissolution instigated by adding a large volume of organic solvent/sodium hydroxide mixture. The limit of detection was lower (by a factor of 2.5-21) and the sensitivity was (3.5-30-fold) higher than immunoassays using commercial labeling systems (FITC and peroxidase). This study shows that using fluorescent nanocrystals in combination with the avidin-biotin technique can enhance assay sensitivity and provide a lower limit of detection without requiring long incubation times as in enzyme-based labels.

Adsorption↗

PubMed2004

Nanoparticle labels in immunosensing using optical detection methods.

Efforts to improve the performance of immunoassays and immunosensors by incorporating different kinds of nanostructures have gained considerable momentum over the last decade. Apart from liposomes, which will not be discussed here, most groups focus on artificial, particulate marker systems, both organic and inorganic. The underlying detection procedures may be based either on electro-magnetical or optical techniques. This review will be confined to the latter only, comprising nanoparticle applications generating signals as diverse as static and time-resolved luminescence, one- and two-photon absorption, Raman and Rayleigh scattering as well as surface plasmon resonance and others. In general, all endeavors cited are geared to achieve one or more of the following goals: lowering of detection limits (if possible, down to single-molecule level), parallel integration of multiple signals (multiplexing), signal amplification by several orders of magnitude and prevention of photobleaching effects with concomitant maintenance of antigen binding specificity and sensitivity. Inorganic nanoparticle labels based on noble metals, semiconductor quantum dots and nanoshells appear to be the most versatile systems for these bioanalytical applications of nanophotonics.

Biosensing Techniques↗

PubMed2004

Silole nanocrystals as novel biolabels.

A novel class of biofunctional silole nanocrystals with the potential to create highly sensitive immunoassay was firstly demonstrated. Biolabels were constructed by encapsulating nanocrystalline hexaphenylsilole [Ph2Si(CPh)4HPS] within ultrathin polyelectrolyte layers via the layer-by-layer (LbL) technique that provided an "interface" for the attachment of antibodies. A high ratio of fluorescent dyes to biomolecules (F/P ratio; 2.4 x 10(3)) was achieved without self-quenching problem. The aggregation-induced emission (AIE) feature offered silole biolabels the sensitivity 40- to 140-fold higher than that of a start-of-the-art immunoassay using directly fluorescent-labeled antibodies.

Crystallization↗

PubMed2004

On the influence of different surfaces in nano- and submicrometer particle based fluorescence immunoassays.

Recently, numerous attempts have been made to improve the performance of fluorescence immunoassays. One way pursued is the substitution of labeling molecules by micro- or nanocrystalline dyes. The surfaces of these particulate structures are typically engineered by a layerwise assembly of oppositely charged polyelectrolytes, the outer layer being constituted of biorecognition molecules, for example, immunoglobulins. In this study, we show that amphiphilic polymers such as alkylated poly(ethylene imine)s and 1,2-distearoyl-sn-glycero-3-phosphatoethanolamine-N-[amino(poly(ethylene glycol))] can fully substitute the more intricate layer-by-layer technique and evaluate the influence of surface charge and particle size on the overall performance of these assays.

Ethylene Glycols↗

PubMed2004

Nanocrystal biolabels with releasable fluorophores for immunoassays.

A novel signal amplification technology based on a new class of biofunctional fluorescent nanocrystals holds promise to improve the sensitivity and the limits of detection of immunoassays. A two-step approach without layer-by-layer techniques is described to encapsulate the fluorogenic precursor fluorescein diacetate (FDA) nanocrystals (107-nm average size) followed by conjugation of the antibody. Distearoylphosphatidylethanolamine (DSPE) modified with amino(poly(ethylene glycol)) (PEG(2000)Amine) is coated on the surface of the FDA nanocrystals to provide a interface for the antibody coupling. Anti-mouse antibodies are attached to the nanocrystalline FDA biolabels by adsorption. A high molar ratio of fluorescent molecules to biomolecules (2.8 x 10(4)) is achieved in this nanocrystal biolabel system. The analytical performance of the nanocrystal-based label system is evaluated in a model sandwich immunoassay for the detection of mouse IgG. After separation of the nonbound antibody nanocrystal labels, fluorophores are released by hydrolysis and dissolution of the nanocrystalline FDA. Due to the release of the fluorophores (fluoresceins) into a large volume of organic solvent/sodium hydroxide mixture, self-quenching is suppressed. The FDA[DSPE-PEG(2000)Amine]-modified biolabels have a highly stable colloidal suspension with minimized nonspecific interactions. The limit of detection was lowered by a factor of 5-28, and the sensitivity was 400-2700-fold higher compared with a state-of-the-art immunoassay using directly fluorescent-labeled antibodies. Our approach provides high sensitivity and low limits of detection without the need for long incubation times, making it an interesting alternative in biolabel technology.

Crystallization↗

PubMed2002

Nanoencapsulated microcrystalline particles for superamplified biochemical assays.

We report on the preparation and utilization of a novel class of particulate labels based on nanoencapsulated organic microcrystals with the potential to create highly amplified biochemical assays. Labels were constructed by encapsulating microcrystalline fluorescein diacetate (FDA; average size of 500 nm) within ultrathin polyelectrolyte layers of poly(allylamine hydrochloride) and poly(sodium 4-styrenesulfonate) via the layer-by-layer technique. Subsequently, the polyelectrolyte coating was used as an "interface" for the attachment of anti-mouse antibodies through adsorption. A high molar ratio of fluorescent molecules present in the microcrystal core to biomolecules on the particle surface was achieved. The applicability of the microcrystal-based label system was demonstrated in a model sandwich immunoassay for mouse immunoglobulin G detection. Following the immunoreaction, the FDA core was dissolved by exposure to organic solvent, leading to the release of the FDA molecules into the surrounding medium. Amplification rates of 70-2000-fold (expressed as an increase in assay sensitivity) of the microcrystal label-based assay compared with the corresponding immunoassay performed with direct fluorescently labeled antibodies are reported. Our approach provides a general and facile means to prepare a novel class of biochemical assay labeling systems. The technology has the potential to compete with enzyme-based labels as it does not require long incubation times, thus speeding up bioaffinity tests.

Animals↗