PubMed Health⌕ Search

Biomedical subjects

Maureen E Callow

Publications and source records attributed to Maureen E Callow.

17 recordsLinked to original sources
PubMed2006

Effect of marine bacterial isolates on the growth and morphology of axenic plantlets of the green alga Ulva linza.

The green marine macroalga, Ulva linza, adopts an "atypical" form when grown in the absence of bacteria. Twenty unique strains of periphytic bacteria, isolated from three species of Ulva, were identified by 16S rDNA sequencing. These isolates were assessed for their effect on the growth and morphological development of axenic plantlets of U. linza. Results showed that the effect of bacterial strains was strain- but not taxon-specific. Thirteen isolates returned the aberrant morphology to normal and of these, five also significantly increased growth rate. One isolate increased growth, but had no effect on morphology. Biofilms of some of these isolates stimulated the settlement of Ulva zoospores but there was no correlation between bacterial isolates that stimulated zoospore settlement and those that initiated changes in morphology and/or growth of the cultured alga.

Bacteria↗
PubMed2006

Anti-biofouling properties of comblike block copolymers with amphiphilic side chains.

Surfaces of novel block copolymers with amphiphilic side chains were studied for their ability to influence the adhesion of marine organisms. The surface-active polymer, obtained by grafting fluorinated molecules with hydrophobic and hydrophilic blocks to a block copolymer precursor, showed interesting bioadhesion properties. Two different algal species, one of which adhered strongly to hydrophobic surfaces, and the other, to hydrophilic surfaces, showed notably weak adhesion to the amphiphilic surfaces. Both organisms are known to secrete adhesive macromolecules, with apparently different wetting characteristics, to attach to underwater surfaces. The ability of the amphiphilic surface to undergo an environment-dependent transformation in surface chemistry when in contact with the extracellular polymeric substances is a possible reason for its antifouling nature. Near-edge X-ray absorption fine structure spectroscopy (NEXAFS) was used, in a new approach based on angle-resolved X-ray photoelectron spectroscopy (XPS), to determine the variation in chemical composition within the top few nanometers of the surface and also to study the surface segregation of the amphiphilic block. A mathematical model to extract depth-profile information from the normalized NEXAFS partial electron yield is developed.

Geologic Sediments↗
PubMed2006

Comparison of the fouling release properties of hydrophobic fluorinated and hydrophilic PEGylated block copolymer surfaces: attachment strength of the diatom Navicula and the green alga Ulva.

To understand the role of surface wettability in adhesion of cells, the attachment of two different marine algae was studied on hydrophobic and hydrophilic polymer surfaces. Adhesion of cells of the diatom Navicula and sporelings (young plants) of the green macroalga Ulva to an underwater surface is mainly by interactions between the surface and the adhesive exopolymers, which the cells secrete upon settlement and during subsequent colonization and growth. Two types of block copolymers, one with poly(ethylene glycol) side-chains and the other with liquid crystalline, fluorinated side-chains, were used to prepare the hydrophilic and hydrophobic surfaces, respectively. The formation of a liquid crystalline smectic phase in the latter inhibited molecular reorganization at the surface, which is generally an issue when a highly hydrophobic surface is in contact with water. The adhesion strength was assessed by the fraction of settled cells (Navicula) or biomass (Ulva) that detached from the surface in a water flow channel with a wall shear stress of 53 Pa. The two species exhibited opposite adhesion behavior on the same sets of surfaces. While Navicula cells released more easily from hydrophilic surfaces, Ulva sporelings showed higher removal from hydrophobic surfaces. This highlights the importance of differences in cell-surface interactions in determining the strength of adhesion of cells to substrates.

Biopolymers↗
PubMed2006

Engineered antifouling microtopographies--correlating wettability with cell attachment.

Bioadhesion and surface wettability are influenced by microscale topography. In the present study, engineered pillars, ridges and biomimetic topography inspired by the skin of fast moving sharks (Sharklet AF) were replicated in polydimethylsiloxane elastomer. Sessile drop contact angle changes on the surfaces correlated well (R2 = 0.89) with Wenzel and Cassie and Baxter's relationships for wettability. Two separate biological responses, i.e. settlement of Ulva linza zoospores and alignment of porcine cardiovascular endothelial cells, were inversely proportional to the width (between 5 and 20 microm) of the engineered channels. Zoospore settlement was reduced by approximately 85% on the finer (ca 2 microm) and more complex Sharklet AF topographies. The response of both cell types suggests their responses are governed by the same underlying thermodynamic principles as wettability.

Animals↗
PubMed2005

The antifouling and fouling-release performance of hyperbranched fluoropolymer (HBFP)-poly(ethylene glycol) (PEG) composite coatings evaluated by adsorption of biomacromolecules and the green fouling alga Ulva.

Cross-linked hyperbranched fluoropolymer (HBFP) and poly(ethylene glycol) (PEG) amphiphilic networks with PEG weight percentages of 14% (HBFP-PEG14), 29% (HBFP-PEG29), 45% (HBFP-PEG45), and 55% (HBFP-PEG55) were prepared on 3-aminopropyl)triethoxysilane (3-APS) functionalized microscope glass slides for marine antifouling and fouling-release applications. The surface-free energies (gamma(s)), polar (gamma(s)(p) and gamma(s)(AB)), and dispersion (gamma(s)(d) and gamma(s)(LW)) components were evaluated using advancing contact angles by two-liquid geometric-mean and three-liquid Lifshitz-van der Waals acid-base approaches. The HBFP coating exhibited a low surface energy of 22 mJ/m(2), while the gamma(s) and gamma(s)(p) of the cross-linked HBFP-PEG coatings increased proportionally with the PEG weight percentages in the networks. The adsorption of bovine serum albumin (BSA), lectin from Codium fragile (CFL), lipopolysaccharides from Escherichia coli (LPSE) and Salmonella minnesota (LPSS) upon glass, APS-glass, HBFP, PEG, and the cross-linked HBFP-PEG network coatings were investigated by fluorescence microscopy. The marine antifouling and fouling-release properties of the cross-linked HBFP-PEG coatings were evaluated by settlement and release assays involving zoospores of green fouling alga Ulva (syn. Enteromorpha; Hayden, H. S.; Blomster, J.; Maggs, C. A.; Silva, P. C.; Stanhope, M. J.; Waaland, J. R. Eur. J. Phycol. 2003, 38, 277). The growth and release of Ulva sporelings were also investigated upon the HBFP-PEG45 coating in comparison to a poly(dimethylsiloxane) elastomer (PDMSE) standard material. Of the heterogeneous cross-linked network coatings, the maximum resistances to protein, lipopolysaccharide, and Ulva zoospore adhesion, as well as the best zoospore and sporeling release properties, were recorded for the HBFP-PEG45 coating. This material also exhibited better performance than did a standard PDMSE coating, suggesting its unique applicability in fouling-resistance applications.

Acids↗
PubMed2005

Pyrithiones as antifoulants: environmental fate and loss of toxicity.

The environmental fate and the loss of toxicity of two important antifouling actives, zinc pyrithione (ZnPT) and copper pyrithione (CuPT), were investigated using a bioassay study and an outdoor microcosm study. The bioassay used inhibition of the growth of a marine diatom (Amphora coffeaeformis) to measure the toxicity of ZnPT and CuPT over time in sterile, natural, and sediment-supplemented seawater. In natural seawater and sediment-supplemented seawater in the dark and in sterile seawater exposed to light, growth inhibition was reduced at rates corresponding to the rapid degradation rates for ZnPT and CuPT measured in previous aquatic metabolism, die-away, and photolysis studies. Similarly, the bioassay results from sterile seawater in the dark were consistent with the slower degradation rates measured in abiotic hydrolysis studies. In addition to corroborating the rapid degradation of pyrithione upon exposure to light or sediment, the loss of toxicity indicated that the degradation products were not toxic at the concentrations produced from the dose, which was much higher than predicted environmental concentrations. To supplement environmental fate studies designed to elucidate single-pathway transformations, a microcosm study was conducted to integrate all of the degradation pathways. The study used two sediment and water systems, one of which was dosed during the day and the other at night. The pyrithione degraded rapidly in the water phase, with very little accumulation in the sediment. 2-Pyridine sulfonic acid (PSA) and carbon dioxide were the only detectable degradation products 30 d after dosing. Aquatic toxicity studies with PSA showed no observable effect at concentrations at least three orders of magnitude higher than those for either ZnPT or CuPT. As a result, the worst-case environmental concentration of PSA is expected to be far below the no observable effect concentration.

Animals↗
PubMed2005

The influence of elastic modulus and thickness on the release of the soft-fouling green alga Ulva linza (syn. Enteromorpha linza) from poly(dimethylsiloxane) (PDMS) model networks.

The effect of modulus and film thickness on the release of adhered spores and sporelings (young plants) of the green fouling alga Ulva (syn. Enteromorpha) was investigated. PDMS elastomers of constant thickness (100 microm) but different elastic moduli were prepared by varying cross-link density with functional silicone oligomers with degrees of polymerization ranging from 18-830. This provided a 50-fold range of modulus values between 0.2 and 9.4 MPa. Three PDMS coatings of different thicknesses were tested at constant elastic modulus (0.8 MPa). The data revealed no significant increase in percentage spore removal except at the lowest modulus of 0.2 MPa although sporelings released more readily at all but the highest modulus. The influence of coating thickness was also greater for the release of sporelings compared to spores. The release data are discussed in the light of fracture mechanics models that have been applied to hard fouling. New concepts appertaining to the release of soft fouling organisms are proposed, which take into account the deformation in the adhesive base of the adherand and deformation of the PDMS film.

Cell Adhesion↗
PubMed2005

Hybrid xerogel films as novel coatings for antifouling and fouling release.

Hybrid sol-gel-derived xerogel films prepared from 45/55 (mol ratio) n-propyltrimethoxysilane (C3-TMOS)/tetramethylorthosilane (TMOS), 2/98 (mol ratio) bis[3-(trimethoxysilyl)propyl]-ethylenediamine (enTMOS)/tetraethylorthosilane (TEOS), 50/50 (mol ratio) n-octyltriethoxysilane (C8-TEOS)/TMOS, and 50/50 (mol ratio) 3,3,3-trifluoropropyltrimethoxysilane (TFP-TMOS)/TMOS were found to inhibit settlement of zoospores of the marine fouling alga Ulva (syn. Enteromorpha) relative to settlement on acid-washed glass and give greater release of settled zoospores relative to glass upon exposure to pressure from a water jet. The more hydrophobic 50/50 C8-TEOS/TMOS xerogel films had the lowest critical surface tension by comprehensive contact angle analysis and gave significantly greater release of 8-day Ulva sporeling biomass after exposure to turbulent flow generated by a flow channel than the other xerogel surfaces or glass. The 50/50 C8-TEOS/TMOS xerogel was also a fouling release surface for juveniles of the tropical barnacle Balanus amphitrite. X-ray photon electron data indicated that the alkylsilyl residues of the C3-TMOS-, C8-TEOS-, and TFP-TMOS-containing xerogels were located on the surface of the xerogel films (in a vacuum), which contributes to the film hydrophobicity. Similarly, the amine-containing silyl residues of the enTMOS/TEOS films were located at the surface of the xerogel films, which contributes to the more hydrophilic character and increased critical surface tension of these films.

Animals↗
PubMed2005

Evaluation of the attachment strength of individuals of Asterina gibbosa (Asteroidea, Echinodermata) during the perimetamorphic period.

A turbulent channel flow apparatus was used to determine the adhesion strength of the three perimetamorphic stages of the asteroid Asterina gibbosa, i.e. the brachiolaria larvae, the metamorphic individuals and the juveniles. The mean critical wall shear stresses (wall shear stress required to dislodge 50% of the attached individuals) necessary to detach larvae attached by the brachiolar arms (1.2 Pa) and juveniles attached by the tube feet (7.1 Pa) were one order of magnitude lower than the stress required to dislodge metamorphic individuals attached by the adhesive disc (41 Pa). This variability in adhesion strength reflects differences in the functioning of the adhesive organs for these different life stages of sea stars. Brachiolar arms and tube feet function as temporary adhesion organs, allowing repetitive cycles of attachment to and detachment from the substratum, whereas the adhesive disc is used only once, at the onset of metamorphosis, and is responsible for the strong attachment of the metamorphic individual, which can be described as permanent adhesion. The results confirm that the turbulent water channel apparatus is a powerful tool to investigate the adhesion mechanisms of minute organisms.

Animals↗
PubMed2004

Adhesion and motility of fouling diatoms on a silicone elastomer.

Recent demands for non-toxic antifouling technologies have led to increased interest in coatings based on silicone elastomers that 'release' macrofouling organisms when hydrodynamic conditions are sufficiently robust. However, these types of coatings accumulate diatom slimes, which are not released even from vessels operating at high speeds (>30 knots). In this study, adhesion strength and motility of three common fouling diatoms (Amphora coffeaeformis var. perpusilla (Grunow) Cleve, Craspedostauros australis Cox and Navicula perminuta Grunow) were measured on a poly-dimethylsiloxane elastomer (PDMSE) and acid-washed glass. Adhesion of the three species was stronger to PDMSE than to glass but the adhesion strengths varied. The wall shear stress required to remove 50% of cells from PDMSE was 17 Pa for Craspedostauros, 24 Pa for Amphora and >>53 Pa for Navicula; the corresponding values for glass were 3, 10 and 25 Pa. In contrast, the motility of the three species showed little or no correlation between the two surfaces. Craspedostauros moved equally well on glass and PDMSE, Amphora moved more on glass initially before movement ceased and Navicula moved more on PDMSE before movement ceased. The results show that fouling diatoms adhere more strongly to a hydrophobic PDMSE surface, and this feature may contribute to their successful colonization of low surface energy, foul-release coatings. The results also indicate that diatom motility is not related to adhesion strength, and motility does not appear to be a useful indicator of surface preference by diatoms.

Adhesives↗
PubMed2004

Antifouling potential of lubricious, micro-engineered, PDMS elastomers against zoospores of the green fouling alga Ulva (Enteromorpha).

The settlement and release of Ulva spores from chemically modified, micro-engineered surface topographies have been investigated using poly(dimethyl siloxane) elastomers (PDMSe) with varying additions of non-network forming poly(dimethyl siloxane) based oils. The topographic features were based on 5 microns wide pillars or ridges separated by 5, 10, or 20 microns wide channels. Pattern depths were 5 or 1.5 microns. Swimming spores showed no marked difference in settlement on smooth surfaces covered with excess PDMS oils. However, incorporation of oils significantly reduced settlement density on many of the surfaces with topographic features, in particular, the 5 microns wide and deep channels. Previous results, confirmed here, demonstrate preferences by the spores to settle in channels and against pillars with spatial dimensions of 5 microns, 10 microns and 20 microns. The combination of lubricity and pillars significantly reduced the number of attached spores compared to the control, smooth, unmodified PDMSe surfaces when exposed to turbulent flow in a flow channel. The results are discussed in relation to the energy needs for spores to adhere to various surface features and the concepts of ultrahydrophobic surfaces. A factorial, multi-level experimental design was analyzed and a 2nd order polynomial model was regressed for statistically significant effects and interactions to determine the magnitude and direction of influence on the spore density measurements between factor levels.

Analysis of Variance↗
PubMed2004

Effect of substratum surface chemistry and surface energy on attachment of marine bacteria and algal spores.

Two series of self-assembled monolayers (SAMs) of omega-substituted alkanethiolates on gold were used to systematically examine the effects of varying substratum surface chemistry and energy on the attachment of two model organisms of interest to the study of marine biofouling, the bacterium Cobetia marina (formerly Halomonas marina) and zoospores of the alga Ulva linza (formerly Enteromorpha linza). SAMs were formed on gold-coated glass slides from solutions containing mixtures of methyl- and carboxylic acid-terminated alkanethiols and mixtures of methyl- and hydroxyl-terminated alkanethiols. C. marina attached in increasing numbers to SAMs with decreasing advancing water contact angles (theta(AW)), in accordance with equation-of-state models of colloidal attachment. Previous studies of Ulva zoospore attachment to a series of mixed methyl- and hydroxyl-terminated SAMs showed a similar correlation between substratum theta(AW) and zoospore attachment. When the hydrophilic component of the SAMs was changed to carboxylate, however, the profile of attachment of Ulva was significantly different, suggesting that a more complex model of interfacial energetics is required.

Bacterial Adhesion↗
PubMed2003

Specificity in the settlement -- modifying response of bacterial biofilms towards zoospores of the marine alga Enteromorpha.

Previous studies have shown that the rate of settlement of zoospores of the green alga Enteromorpha is stimulated by mixed microbial biofilms and that the number of zoospores settling is positively correlated with the number of bacteria in the biofilm. In the present study the specificity of this relationship has been investigated. Ninety-nine strains of marine bacteria were isolated from natural biofilms on rocks and the surface of Enteromorpha plants. Isolates were screened by denaturing gradient gel electrophoresis (DGGE) to eliminate replicates and 16S rDNA sequencing identified a total of 37 unique strains. Phylogenetic analysis revealed that the isolated bacterial strains belonged to three groups gamma-Proteobacteria (28 strains), Cytophaga-Flavobacteria-Bacteroid (CFB) group (six strains) and alpha-Proteobacteria (one strain). Two strains were unassigned, showing < 93% sequence similarity with the CFB group. The main genera of gamma-Proteobacteria were Pseudoalteromonas (14 strains), Vibrio (five strains), Shewanella (five strains), Halomonas (three strains) and Pseudomonas (one strain). Spore settlement experiments were conducted on single-species biofilms, developed for different times on glass slides. The effect of correcting spore settlement values for biofilm density was evaluated. Results showed that the effect of bacterial strains on spore settlement was strain- but not taxon-specific and activity varied with the age of the biofilm. However, most of the strains belonging to genera Vibrio and Shewanella showed stimulation. Pseudoalteromonas strains showed a range of effects including settlement-inhibiting, paralysing and lysing activities. Spatial analysis of bacterial density in the presence and absence of spores revealed a range of different types of association between spores and bacteria. Overall, the spatial association between spores and bacteria appears to be independent of the overall quantitative influence of bacterial cells on spore settlement.

Animals↗
PubMed2003

Coatings based on side-chain ether-linked poly(ethylene glycol) and fluorocarbon polymers for the control of marine biofouling.

The preparation of side group modified polystyrene-based surface-active block copolymers (SABC) for use as marine fouling resistance/release applications is described. Modifying moieties such as poly(ethylene glycol) (PEG) and semifluorinated segments were used. A novel bilayer methodology has been employed that provides both suitable mechanical properties through the use of an elastomeric primer layer of styrene-ethylene/butylene-styrene (SEBS) and control of surface-chemistry through use of the SABCs. This approach has potential as a cost-effective technology for environmentally benign coatings that resist and release marine biofouling. Initial testing of these materials included determination of captive bubble contact angles and protein adsorption. Testing against marine fouling organisms was performed using settlement and adhesion bioassays with zoospores of the green alga Enteromorpha. The results showed that all surfaces had markedly reduced levels of zoospore settlement compared with glass controls and that adhesion strength was strongly affected by the semifluorinated SABC. The results are discussed in terms of surface properties.

Adhesiveness↗
PubMed2002

Effect of nutrient limitation on biofilm formation and phosphatase activity of a Citrobacter sp.

A phosphatase-overproducing Citrobacter sp. (NCIMB 40259) was grown in an air-lift reactor in steady-state continuous culture under limitation of carbon, phosphorus or nitrogen. Substantial biofilm formation, and the highest phosphatase activity, were observed under lactose limitation. However, the total amount of biofilm wet biomass and the phosphatase specific activity were reduced in phosphorus- or nitrogen-limited cultures or when glucose was substituted for lactose as the limiting carbon source. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and confocal laser scanning microscopy (CLSM) showed differences in cell and biofilm morphology in relation to medium composition. Electron microscopy suggested that the differences in biofilm formation may relate to differential expression of fimbriae on the cell surface.

Biofilms↗
PubMed2002

Marine biofouling: a sticky problem.

Organisms that colonise underwater surfaces, such as barnacle larvae and spores of algae, use a diverse array of biological 'glues' to provide both temporary and more permanent adhesion. The practical consequence of colonisation by these organisms is biofouling - something that has plagued mariners for years - causing increased drag and, in extreme cases, corrosion. Might there be a biological solution to this biological problem?

Animals↗