Biomedical subjects

Menno B Claase

Publications and source records attributed to Menno B Claase.

3 recordsLinked to original sources

PubMed2003

Porous PEOT/PBT scaffolds for bone tissue engineering: preparation, characterization, and in vitro bone marrow cell culturing.

The preparation, characterization, and in vitro bone marrow cell culturing on porous PEOT/PBT copolymer scaffolds are described. These scaffolds are meant for use in bone tissue engineering. Previous research has shown that PEOT/PBT copolymers showed in vivo degradation, calcification, and bone bonding. Despite this, several of these copolymers do not support bone marrow cell growth in vitro. Surface modification, such as gas-plasma treatment, is needed to improve the in vitro cell attachment. Porous structures were prepared using a freeze-drying and a salt-leaching technique, the latter one resulting in highly porous interconnected structures of large pore size. Gas-plasma treatment with CO(2) generated a surface throughout the entire structure that enabled bone marrow cells to attach. The amount of DNA was determined as a measure for the amount of cells present on the scaffolds. No significant effect of pore size on the amount of DNA present was seen for scaffolds with pore sizes between 250-1000 microm. Light microscopy data showed cells in the center of the scaffolds, more cells were observed in the scaffolds of 425-500 microm and 500-710 microm pore size compared to the ones with 250-425 microm and 710-1000 microm pores.

Alkaline Phosphatase↗

PubMed2002

Design of segmented poly(ether ester) materials and structures for the tissue engineering of bone.

In this study, PEOT/PBT segmented copolymers of different compositions have been evaluated as possible scaffold materials for the tissue engineering of bone. By changing the composition of PEOT/PBT copolymers, very different mechanical and swelling behaviors are observed. Tensile strengths vary from 8 to 23 MPa and elongations at break from 500 to 1300%. Water-uptake ranges from 4 up to as high as 210%. The in vitro degradation of PEOT/PBT copolymers occurs both by hydrolysis and oxidation. In both cases degradation is more rapid for copolymers with high PEO content. PEOT/PBT scaffolds with varying porosities and pore sizes have been prepared by molding and freeze-drying techniques in combination with particulate-leaching. The most hydrophilic PEOT/PBT copolymers did not sustain goat bone marrow cell adhesion and growth. However, surface modification by gas plasma treatment showed a very much improved polymer-cell interaction for all PEOT/PBT copolymer compositions. Their mechanical properties, degradability and ability to sustain bone marrow cell growth make PEOT/PBT copolymers excellent materials for bone tissue engineering.

Animals↗

PubMedDate not supplied

Enhanced bone marrow stromal cell adhesion and growth on segmented poly(ether ester)s based on poly(ethylene oxide) and poly(butylene terephthalate).

In previous studies in rats and goats, hydrophilic compositions of the PEOT/PBT block copolymer family have shown in vivo calcification and bone bonding. These copolymers are therefore interesting candidates as scaffolding materials in bone tissue engineering applications. Model studies using goat bone marrow stromal cells, however, showed that it was not possible to culture bone marrow stromal cells in vitro on these hydrophilic copolymers. In this paper two ways of surface modifying these materials to improve in vitro bone marrow stromal cell attachment and growth are discussed. Two different approaches are described: (1) blending of hydroxyapatite (HA) followed by CO(2) gas plasma etching; (2) surface modification using CO(2) gas plasma treatments. It was observed that not only HA but also the CO(2) plasma treatment by itself has a positive effect on bone marrow stromal cell attachment and growth. Gas plasma treatment appeared to be the most successful approach, resulting in a large increase in the amount of bone marrow stromal cells present on the surface (determined by a DNA assay). The amount of DNA present on the plasma-treated copolymer 1000/70/30 PEOT/PBT, based on poly(ethylene oxide, M(w) = 1000, 70 m% soft segment), was comparable to the amount present on PDLLA and significantly higher than the amount present on PCL after 7 days of cell culturing. The fact that after gas plasma treatment bone marrow stromal cells do attach to PEOT/PBT copolymers, enables in vitro bone marrow stromal cell culturing, making bone tissue engineering applications of these materials possible.

Animals↗