PubMed Health⌕ Search

Biomedical subjects

Merja Penttilä

Publications and source records attributed to Merja Penttilä.

49 records · Page 3Linked to original sources

Overexpression of the gene encoding GTP:mannose-1-phosphate guanyltransferase, mpg1, increases cellular GDP-mannose levels and protein mannosylation in Trichoderma reesei.

To elucidate the regulation and limiting factors in the glycosylation of secreted proteins, the mpg1 and dpm1 genes from Trichoderma reesei (Hypocrea jecorina) encoding GTP:alpha-D-mannose-1-phosphate guanyltransferase and dolichyl phosphate mannose synthase (DPMS), respectively, were overexpressed in T. reesei. No significant increases were observed in DPMS activity or protein secretion in dpm1-overexpressing transformants, whereas overexpression of mpg1 led to a twofold increase in GDP-mannose (GDPMan) levels. GDPMan was effectively utilized by mannnosyltransferases and resulted in hypermannosylation of secreted proteins in both N and O glycosylation. Overexpression of the mpg1 gene also increased the transcription of the dpm1 gene and DPMS activity. Our data indicate that the level of cellular GDPMan can play a major regulatory role in protein glycosylation in T. reesei.

Bacterial Proteins↗

Identification of the first fungal NADP-GAPDH from Kluyveromyces lactis.

Deletion of the phosphoglucose isomerase gene, PGI1, in Saccharomyces cerevisiae leads to a phenotype for which glucose is toxic. This is related to overproduction of NADPH through the oxidative part of the pentose phosphate pathway and the incompetence of S. cerevisiae to deal with this overproduction. A similar deletion (rag2) in Kluyveromyces lactis does not lead to such a phenotype. We transformed a genomic library of K. lactis in a yeast vector to a S. cerevisiae strain with a pgi1 deletion and screened for growth on glucose. We found a gene (GDP1) which encodes a phosphorylating glyceraldehyde-3-phosphate dehydrogenase, NADP-GAPDH (EC 1.2.1.13), that accepts both NADP and NAD. This is the first report of a eukaryotic, nonplant, NADP-linked GAPDH. Presumably, operation of this enzyme in the reverse direction enabled the transformed S. cerevisiae pgi1 deletion mutant to reoxidize the excess NADPH produced when glucose catabolism was forced through the pentose pathway. On the other hand, transcription of the gene in K. lactis was upregulated during growth on D-xylose, which suggests that in K. lactis the enzyme is involved in regeneration of NADPH needed for xylose assimilation, but transcription was not detected in a rag2 mutant grown on glucose. The presence of an asparagine (Asn46 in NADP-GAPDH) instead of the conserved aspartate found in related but NAD-specific enzymes may explain the ability of NADP-GAPDH to work with NADP as well as NAD.

Amino Acid Sequence↗

Characterisation of two 14-3-3 genes from Trichoderma reesei: interactions with yeast secretory pathway components.

The 14-3-3 proteins are highly conserved, ubiquitously expressed proteins taking part in numerous cellular processes. Two genes encoding 14-3-3 proteins, ftt1 and ftt2, were isolated and characterised from the filamentous fungus Trichoderma reesei. FTTI showed the highest sequence identity (98% at the amino acid level) to the Trichoderma harzianum protein Th1433. FTTII is relatively distinct from FTTI, showing approximately 75% identity to other fungal 14-3-3 proteins. Despite their sequence divergence, both of the T. reesei ftt genes were equally able to complement the yeast bmh1 bmh2 double disruption. The T. reesei ftt genes were also found to be quite closely linked in the genomic DNA. A C-terminally truncated version of ftt1 (ftt1DeltaC) was first isolated as a multicopy suppressor of the growth defect of the temperature-sensitive yeast secretory mutant sec15-1. Overexpression of ftt1DeltaC also suppressed the growth defect of sec2-41, sec3-101, and sec7-1 strains. Overexpression of ftt1DeltaC in sec2-41 and sec15-1 strains could also rescue the secretion of invertase at the restrictive temperatures, and overexpression of full-length ftt1 enhanced invertase secretion by wild-type yeast cells. These findings strongly suggest that the T. reesei ftt1 has a role in protein secretion.

14-3-3 Proteins↗

The missing link in the fungal L-arabinose catabolic pathway, identification of the L-xylulose reductase gene.

The fungal L-arabinose pathway consists of five enzymes, aldose reductase, L-arabinitol 4-dehydrogenase, L-xylulose reductase, xylitol dehydrogenase, and xylulokinase. All the genes encoding the enzymes of this pathway are known except for that of L-xylulose reductase (EC 1.1.1.10). We identified a gene encoding this enzyme from the filamentous fungus Trichoderma reesei (Hypocrea jecorina). The gene was named lxr1. It was overexpressed in the yeast Saccharomyces cerevisiae, and the enzyme activity was confirmed in a yeast cell extract. Overexpression of all enzymes of the L-arabinose pathway in S. cerevisiae led to growth of S. cerevisiae on L-arabinose; i.e., we could show that the pathway is active in a heterologous host. The lxr1 gene encoded a protein with 266 amino acids and a calculated molecular mass of 28 428 Da. The LXRI protein is an NADPH-specific reductase. It has activity with L-xylulose, D-xylulose, D-fructose, and L-sorbose. The highest affinity is toward L-xylulose (K(m) = 16 mM). In the reverse direction, we found activity with xylitol, D-arabinitol, D-mannitol, and D-sorbitol. It requires a bivalent cation for activity. It belongs to the protein family of short chain dehydrogenases. The enzyme is catalytically similar and homologous in sequence to a D-mannitol:NADP 2-dehydrogenase (EC 1.1.1.138).

Amino Acid Sequence↗

Primary recovery of a genetically engineered Trichoderma reesei endoglucanase I (Cel 7B) fusion protein in cloud point extraction systems.

Here we present data to demonstrate how partitioning of a hydrophilic enzyme can be directed to the hydrophobic detergent-enriched phase of an aqueous two-phase system by addition of short stretches of amino acid residues to the protein molecule. The target enzyme was the industrially important endoglucanase I, EGI (endo-1,4-beta-D-glucan-4-glucanohydrolase, EC 3.2.1.4, Cel7B) of Trichoderma reesei. We investigated the partitioning of three EGI variants containing various C-terminal peptide extensions including Trp-Pro motifs of different lengths and localizations. Additionally, a recently developed system composed of the thermoseparating copolymer HM-EOPO was utilized to study the effects of fusion tags. The addition of peptides containing tryptohan residues enhanced the partitioning of EGI to the HM-EOPO-rich phase. The system composed of a nonionic detergent (Agrimul NRE1205) resulted in the highest partition coefficient (K = 31) and yield (90%) with the construct EGI(core-P5)(WP)(4) containing (Trp-Pro)(4) after a short linker stretch. A recombinant strain of T. reesei Rut-C30 for large-scale production was constructed in which the fusion protein EGI(core-P5)(WP)(4) was expressed from the strong promoter of the cellulase gene cbh1. The fusion protein was successfully expressed and secreted from the fungus during shake-flask cultivations. Cultivation in a 28-L bioreactor however, revealed that the fusion protein is sensitive to proteases. Consequently, only low production levels were obtained in large-scale production trials.

Bioreactors↗

A novel two-step extraction method with detergent/polymer systems for primary recovery of the fusion protein endoglucanase I-hydrophobin I.

Extraction systems for hydrophobically tagged proteins have been developed based on phase separation in aqueous solutions of non-ionic detergents and polymers. The systems have earlier only been applied for separation of membrane proteins. Here, we examine the partitioning and purification of the amphiphilic fusion protein endoglucanase I(core)-hydrophobin I (EGI(core)-HFBI) from culture filtrate originating from a Trichoderma reesei fermentation. The micelle extraction system was formed by mixing the non-ionic detergent Triton X-114 or Triton X-100 with the hydroxypropyl starch polymer, Reppal PES100. The detergent/polymer aqueous two-phase systems resulted in both better separation characteristics and increased robustness compared to cloud point extraction in a Triton X-114/water system. Separation and robustness were characterized for the parameters: temperature, protein and salt additions. In the Triton X-114/Reppal PES100 detergent/polymer system EGI(core)-HFBI strongly partitioned into the micelle-rich phase with a partition coefficient (K) of 15 and was separated from hydrophilic proteins, which preferably partitioned to the polymer phase. After the primary recovery step, EGI(core)-HFBI was quantitatively back-extracted (K(EGIcore-HFBI)=150, yield=99%) into a water phase. In this second step, ethylene oxide-propylene oxide (EOPO) copolymers were added to the micelle-rich phase and temperature-induced phase separation at 55 degrees C was performed. Total recovery of EGI(core)-HFBI after the two separation steps was 90% with a volume reduction of six times. For thermolabile proteins, the back-extraction temperature could be decreased to room temperature by using a hydrophobically modified EOPO copolymer, with slightly lower yield. The addition of thermoseparating co-polymer is a novel approach to remove detergent and effectively releases the fusion protein EGI(core)-HFBI into a water phase.

Cellulase↗

Extraction of endoglucanase I (Ce17B) fusion proteins from Trichoderma reesei culture filtrate in a poly(ethylene glycol)-phosphate aqueous two-phase system.

Endoglucanases (EGI) (endo-1,4-beta-D-glucan-4-glucanohydrolase, EC 3.2.1.4, Ce17B) of Trichoderma reesei are industrially important enzymes. Thus, there is a great need for development of a primary recovery method suitable for large-scale utilization. In this study we present a concept applicable for large-scale purification of an EGI fusion protein by one-step extraction in a poly(ethylene glycol) PEG-sodium/potassium phosphate aqueous two-phase system. EGI is a two-module enzyme composed of an N-terminal catalytic module and a C-terminal cellulose binding module (CBM) separated by a glycosylated linker region. Partitioning of six different EGI constructs, containing the C-terminal extensions (WP)2, (WP)4 or the amphiphilic protein hydrophobin I (HFB) of T. reesei instead of the CBM were studied to evaluate if any of the fusions could improve the partition coefficient sufficiently to be suitable for large-scale production. All constructs showed improved partitioning in comparison to full length EGI. The (WP)4 extensions resulted in 26- to 60-fold improvement of partition coefficient. Consequently, a relative minor change in amino acid sequence on the two-module protein EGI improved the partition coefficient significantly in the PEG 4000-sodium/potassium phosphate system. The addition of HFBI to EGI clearly enhanced the partition coefficient (K=1.2) in comparison to full-length EGI (K=0.035). Partitioning of the construct with (WP)4 fused to the catalytic module and a short sequence of the linker [EGI(core-P5)(WP)4] resulted in the highest partition coefficient (K=54) and a yield of 98% in the PEG phase. Gel electrophoresis showed that the construct with the (WP)4 tag attached after a penta-proline linker could be purified from the other bulk proteins by only a single-step separation in the PEG 4000-sodium/potassium phosphate system. This is a major improvement in comparison with the previously studied model (ethylene oxide-propylene oxide)-dextran system. Hence, this construct will be suitable for further optimization of the extraction of the enzyme in a PEG 4000-sodium/potassium phosphate system from culture filtrate.

Cellulase↗

Swollenin, a Trichoderma reesei protein with sequence similarity to the plant expansins, exhibits disruption activity on cellulosic materials.

Plant cell wall proteins called expansins are thought to disrupt hydrogen bonding between cell wall polysaccharides without hydrolyzing them. We describe here a novel gene with sequence similarity to plant expansins, isolated from the cellulolytic fungus Trichoderma reesei. The protein named swollenin has an N-terminal fungal type cellulose binding domain connected by a linker region to the expansin-like domain. The protein also contains regions similar to mammalian fibronectin type III repeats, found for the first time in a fungal protein. The swollenin gene is regulated in a largely similar manner as the T. reesei cellulase genes. The biological role of SWOI was studied by disrupting the swo1 gene from T. reesei. The disruption had no apparent effect on the growth rate on glucose or on different cellulosic carbon sources. Non-stringent Southern hybridization of Trichoderma genomic DNA with swo1 showed the presence of other swollenin-like genes, which could substitute for the loss of SWOI in the disruptant. The swollenin gene was expressed in yeast and Aspergillus niger var. awamori. Activity assays on cotton fibers and filter paper were performed with concentrated SWOI-containing yeast supernatant that disrupted the structure of the cotton fibers without detectable formation of reducing sugars. It also weakened filter paper as assayed by an extensometer. The SWOI protein was purified from A. niger var. awamori culture supernatant and used in an activity assay with Valonia cell walls. It disrupted the structure of the cell walls without producing detectable amounts of reducing sugars.

Amino Acid Sequence↗

Assigning probes into a small number of pools separable by electrophoresis.

MOTIVATION: Measuring transcriptional expression levels (transcriptional profiling) has become one of the most important methods in functional genomics. Still, new measuring methods are needed to obtain more reliable, quantitative data about transcription on a genomic scale. In this paper we concentrate on certain computational optimization problems arising in the design of one such novel method. From a computational point of view the key feature of the new method is that the hybridized probes are distinguished from each other based on their different size. Therefore the probes have to be assigned into pools such that the probes in the same pool have unique sizes different enough from each other. Identification of expressed RNA is given by probe pool and probe size while quantification is given by the label of the probe, e.g. fluorescence intensity. RESULTS: We show how to computationally find the probes and assign them into pools for a whole genome such that (i) each gene has a specific probe suitable for amplification and hybridization, and (ii) the expression level measurement can be done in a minimal number of pools separable by electrophoresis in order to minimize the total experiment cost of the measurement. Our main result is a polynomial-time approximation algorithm for assigning the probes into pools. We demonstrate the feasibility of the procedure by selecting probes for the yeast genome and assigning them into less than 100 pools. The probe sequences and their assignment into pools are available for academic research on request from the authors.

Algorithms↗

Surface adhesion of fusion proteins containing the hydrophobins HFBI and HFBII from Trichoderma reesei.

Hydrophobins are surface-active proteins produced by filamentous fungi, where they seem to be ubiquitous. They have a variety of roles in fungal physiology related to surface phenomena, such as adhesion, formation of surface layers, and lowering of surface tension. Hydrophobins can be divided into two classes based on the hydropathy profile of their primary sequence. We have studied the adhesion behavior of two Trichoderma reesei class II hydrophobins, HFBI and HFBII, as isolated proteins and as fusion proteins. Both hydrophobins were produced as C-terminal fusions to the core of the hydrolytic enzyme endoglucanase I from the same organism. It was shown that as a fusion partner, HFBI causes the fusion protein to efficiently immobilize to hydrophobic surfaces, such as silanized glass and Teflon. The properties of the surface-bound protein were analyzed by the enzymatic activity of the endoglucanase domain, by surface plasmon resonance (Biacore), and by a quartz crystal microbalance. We found that the HFBI fusion forms a tightly bound, rigid surface layer on a hydrophobic support. The HFBI domain also causes the fusion protein to polymerize in solution, possibly to a decamer. Although isolated HFBII binds efficiently to surfaces, it does not cause immobilization as a fusion partner, nor does it cause polymerization of the fusion protein in solution. The findings give new information on how hydrophobins function and how they can be used to immobilize fusion proteins.

Cell Adhesion Molecules↗

Expression of a fungal hydrophobin in the Saccharomyces cerevisiae cell wall: effect on cell surface properties and immobilization.

The aim of this work was to modify the cell surface properties of Saccharomyces cerevisiae by expression of the HFBI hydrophobin of the filamentous fungus Trichoderma reesei on the yeast cell surface. The second aim was to study the immobilization capacity of the modified cells. Fusion to the Flo1p flocculin was used to target the HFBI moiety to the cell wall. Determination of cell surface characteristics with contact angle and zeta potential measurements indicated that HFBI-producing cells are more apolar and slightly less negatively charged than the parent cells. Adsorption of the yeast cells to different commercial supports was studied. A twofold increase in the binding affinity of the hydrophobin-producing yeast to hydrophobic silicone-based materials was observed, while no improvement in the interaction with hydrophilic carriers could be seen compared to that of the parent cells. Hydrophobic interactions between the yeast cells and the support are suggested to play a major role in attachment. Also, a slight increase in the initial adsorption rate of the hydrophobin yeast was observed. Furthermore, due to the engineered cell surface, hydrophobin-producing yeast cells were efficiently separated in an aqueous two-phase system by using a nonionic polyoxyethylene detergent, C(12-18)EO(5).

Binding Sites↗

Enzymatic properties and intracellular localization of the novel Trichoderma reesei beta-glucosidase BGLII (cel1A).

This paper describes the characterization of an intracellular beta-glucosidase enzyme BGLII (Cel1a) and its gene (bgl2) from the cellulolytic fungus Trichoderma reesei (Hypocrea jecorina). The expression pattern of bgl2 is similar to that of other cellulase genes known from this fungus, and the gene would appear to be under the control of carbon catabolite repression mediated by the cre1 gene. The BGLII protein was produced in Escherichia coli, and its enzymatic properties were analyzed. It was shown to be a specific beta-glucosidase, having no beta-galactosidase side activity. It hydrolyzed both cellotriose and cellotetraose. BGLII exhibited transglycosylation activity, producing mainly cellotriose from cellobiose and sophorose and cellobiose from glucose. Antibodies raised against BGLII showed the presence of the enzyme in T. reesei cell lysates but not in the culture supernatant. Activity measurements and Western blot analysis of T. reesei strains expressing bgl2 from a constitutive promoter further confirmed the intracellular localization of this beta-glucosidase.

Gene Expression↗

Monitoring the kinetics of glycoprotein synthesis and secretion in the filamentous fungus Trichoderma reesei: cellobiohydrolase I (CBHI) as a model protein.

The authors have developed methodology to study the kinetics of protein synthesis and secretion in filamentous fungi. Production of cellobiohydrolase I (CBHI) by Trichoderma reesei was studied by metabolic labelling of the proteins in vivo with [35S]methionine or [14C]mannose, and subsequent analysis of the labelled proteins using two-dimensional gel electrophoresis. Analysis of the different pl forms of the nascent proteins allowed monitoring of the maturation of CBHI during the transport along the biosynthetic pathway. The maturation of the pi pattern of CBHI as well as secretion into culture medium was prevented by treatment with the reducing agent DTT. The pl forms of CBHI detectable in the presence of DTT corresponded to the early endoplasmic reticulum forms of the protein. Removal of N-glycans by enzymic treatment (endoglycosidase H or peptide-N-glycosidase F), or chemical removal of both N- and O-glycans, changed the pl pattern of CBHI, showing that glycan structures are involved in formation of the different pl forms of the protein. By quantifying the labelled proteins during a time course, parameters describing protein synthesis and secretion were deduced. The mean synthesis time for CBHI under the conditions used was 4 min and the minimum secretion time was 11 min. The methodology developed in this study provides tools to reveal the rate-limiting factors in protein production and to obtain information on the intracellular events involved in the secretion process.

Carbon Radioisotopes↗