PubMed Health⌕ Search

Biomedical subjects

Mi Hee Lim

Publications and source records attributed to Mi Hee Lim.

17 recordsLinked to original sources
PubMed2007

Metal-based turn-on fluorescent probes for sensing nitric oxide.

Nitric oxide, a reactive free radical, regulates a variety of biological processes. The absence of tools to detect NO directly, rapidly, specifically, and selectively motivated us to synthesize metal-based fluorescent probes to visualize the presence of NO. We prepared and investigated Co(II), Fe(II), Ru(II), Rh(II), and Cu(II) complexes as turn-on fluorescent NO sensors. Our exploration has provided insight into how the interaction of transition-metal centers with nitric oxide can be utilized for NO sensing.

Fluorescent Dyes↗
PubMed2006

Direct nitric oxide detection in aqueous solution by copper(II) fluorescein complexes.

A series of FL(n) (n = 1-5) ligands, where FL(n) is a fluorescein modified with a functionalized 8-aminoquinoline group as a copper-binding moiety, were synthesized, and the chemical and photophysical properties of the free ligands and their copper complexes were investigated. UV-visible spectroscopy revealed a 1:1 binding stoichiometry for the Cu(II) complexes of FL(1), FL(3), and FL(5) in pH 7.0 buffered aqueous solutions. The reactions of FL(2) or FL(4) with CuCl(2), however, appear to produce a mixture of 1:1 and 1:2 complexes, as suggested by Job's plots. These binding modes were modeled by the synthesis and X-ray crystal structure determination of Cu(II) complexes of 2-[(quinolin-8-ylamino)methyl]phenol (modL), employed as a surrogate of the FL(n) ligand family. Two kinds of crystals, [Cu(modL)(2)](BF(4))(2) and [Cu(2)(modL')(2)(CH(3)OH)](BF(4))(2) (modL' = 2-[(quinolin-8-ylamino)methyl]phenolate), were obtained. The structures suggest that one oxygen and two nitrogen atoms of the FL(n) ligands most likely bind to Cu(II). Introduction of nitric oxide (NO) to pH 7.0 buffered aqueous solutions of Cu(FL(n)) (1 microM CuCl(2) and 1 microM FL(n)) at 37 degrees C induces an increase in fluorescence. The fluorescence response of Cu(FL(n)) to NO is direct and specific, which is a significant improvement over commercially available small molecule-based probes that are capable of detecting NO only indirectly. The NO-triggered fluorescence increase of Cu(FL(5)) occurs by reduction of Cu(II) to Cu(I) with concomitant dissociation of the N-nitrosated fluorophore ligand from copper. Spectroscopic and product analyses of the reaction of the FL(5) copper complex with NO indicated that the N-nitrosated fluorescein ligand (FL(5)-NO) is the species responsible for fluorescence turn-on. Density functional theory (DFT) calculations of FL(5) versus FL(5)-NO reveal how N-nitrosation of the fluorophore ligand brings about the fluorescence increase. The copper-based probes described in the present work form the basis for real-time detection of nitric oxide production in living cells.

Aminoquinolines↗
PubMed2006

Fluorescent nitric oxide detection by copper complexes bearing anthracenyl and dansyl fluorophore ligands.

Anthrancenyl and dansyl fluorophore ligands [AnCH2pipCS(2)K (1), Ds-Hen (2), Ds-HAMP (3), Ds-HAQ (4), and Ds-HAPP (5)] were prepared for coordination to Cu(II). Five Cu complexes, [Cu(AnCH2pipCS2)2] (6), [Cu(Ds-en)2] (7), [Cu(Ds-AMP)2] (8), [Cu(Ds-AQ)2] (9), and [Cu(Ds-APP)(OTf)] (10), were synthesized as candidates for detecting nitric oxide (NO) by fluorescence and characterized by X-ray crystallography. A decrease in fluorescence compared to that of the free ligands (1-5) was measured following the formation of the corresponding five Cu(II) complexes 6-10. Fluorescence was restored in the presence of NO in CH3OH/CH2Cl2 solutions of the compounds. Complexes 7, 8, and 10 exhibited a fluorescence response to NO in pH 7.0 or 9.0 buffered aqueous solutions. Spectroscopic studies revealed that NO-induced fluorescence enhancement in these Cu(II) complexes occurs by reduction to Cu(I). The present studies demonstrate that Cu(II) complexes are effective as fluorescent probes for detecting NO in both organic and aqueous environments.

Anthracenes↗
PubMed2006

Visualization of nitric oxide in living cells by a copper-based fluorescent probe.

Nitric oxide (NO) serves as a messenger for cellular signaling. To visualize NO in living cells, we synthesized a turn-on fluorescent probe for use in combination with microscopy. Unlike existing fluorescent sensors, the construct--a Cu(II) complex of a fluorescein modified with an appended metal-chelating ligand (FL)--directly and immediately images NO rather than a derivative reactive nitrogen species. Using spectroscopic and mass spectrometric methods, we established that the mechanism of the reaction responsible for the NO-induced fluorescence involves reduction of the complex to Cu(I) with release of the nitrosated ligand, which occurs irreversibly. We detected NO produced by both constitutive and inducible NO synthases (cNOS and iNOS, respectively) in live neurons and macrophages in a concentration- and time-dependent manner by using the Cu(II)-based imaging agent. Both the sensitivity to nanomolar concentrations of NO and the spatiotemporal information provided by this complex demonstrate its value for numerous biological applications.

Animals↗
PubMed2006

Nitric oxide-induced fluorescence enhancement by displacement of dansylated ligands from cobalt.

The cobalt complexes [Co(Ds-AMP)(2)] (1) and [Co(Ds-AQ)(2)] (2), where Ds-AMP and Ds-AQ are the conjugate bases of dansyl aminomethylpyridine (Ds-HAMP) and dansyl aminoquinoline (Ds-HAQ), respectively, were synthesized in two steps as fluorescence-based nitric oxide (NO) sensors and characterized by X-ray crystallography. The fluorescence of the two complexes was significantly quenched in CH(3)CN or CH(3)OH compared to that of the free Ds-HAMP or Ds-HAQ ligands. Addition of NO to a CH(3)CN solution of 1 or 2 enhanced the integrated fluorescence emission by factors of 2.1(+/-0.3) or 3.6(+/-0.4) within 35 or 20 min, respectively. Introduction of NO to methanolic solutions of the complexes similarly increased the fluorescence by 1.4(+/-0.1) for 1 or 6.5(+/-1.4) for 2 within 1 h. These studies demonstrate that 1 and 2 can monitor the presence of NO with turn-on emission and that their fluorescence responses are more rapid than those of previously reported cobalt systems in coordinating solvents such as CH(3)CN and CH(3)OH. (1)H NMR and IR spectroscopic data revealed the formation of a [Co(NO)(2)](10) cobalt-dinitrosyl adduct, with concomitant dissociation of one ligand from the cobalt center, as the metal-containing product of the NO reactions, a result indicating NO-induced ligand release to be the cause of the fluorescence increase.

Cobalt↗
PubMed2005

Copper complexes for fluorescence-based NO detection in aqueous solution.

Two copper(II) complexes containing dansylated ligands were investigated as turn-on fluorescence-based nitric oxide (NO) sensors. Upon addition of NO (g), the quenched fluorescence of both complexes was restored in both organic and buffered aqueous solutions, which is caused by the formation of a diamagnetic Cu(I) species and protonation of the sulfonamide functionality of the ligands. The NO detection limit of these Cu(II) complexes is 10 nM.

Copper↗
PubMed2005

Conjugated polymer-based fluorescence turn-on sensor for nitric oxide.

A turn-on fluorescent sensor for NO (g) in solution was synthesized using a bipyridyl-substituted poly(p-phenylene vinylene) derivative (CP1) as the sensory scaffold. The action of NO (g) upon the CP1-Cu(II) complex reduces it to the CP1-Cu(I) complex with a concomitant 2.8-fold increase in emission intensity. The reagent is selective for NO (g) versus other biological reactive nitrogen species, except for nitroxyl, and has a detection sensitivity limit of 6.3 nM. [structure: see text]

Copper↗
PubMed2005

Parallel mechanistic studies on the counterion effect of manganese salen and porphyrin complexes on olefin epoxidation by iodosylarenes.

Counterions of manganese(III) porphyrin complexes influence diastereoselectivity in cis-stilbene epoxidation and product distribution in cyclohexene epoxidation markedly. In the epoxidation of cis-stilbene by iodosylbenzene carried out in a solvent mixture of CH(3)CN and CH(2)Cl(2), trans-stilbene oxide is the major product in the reaction of manganese complexes bearing a ligating anion (i.e., Cl(-)), whereas cis-stilbene oxide is the dominant product in the reactions of manganese complexes bearing a poorly-ligating anion (i.e., CF(3)SO(4)(-)). In cyclohexene epoxidation, the yields of allylic oxidation products such as cyclohexenol and cyclohexenone are higher when the counterion of the manganese catalysts is Cl(-) than when the counterion is CF(3)SO(4)(-). The product selectivities are also dependent on the nature of iodosylarenes and the axial and porphyrin ligands of the manganese porphyrin catalysts. The observation that product selectivities are different depending on the iodosylarenes may indicate the involvement of multiple oxidants in oxygen atom transfer reactions. These results are compared with those observed in manganese salen-catalyzed epoxidation of olefins by iodosylarenes.

Journal Article↗
PubMed2004

Structural insights into nonheme alkylperoxoiron(III) and oxoiron(IV) intermediates by X-ray absorption spectroscopy.

Transient mononuclear low-spin alkylperoxoiron(III) and oxoiron(IV) complexes that are relevant to the activation of dioxygen by nonheme iron enzymes have been generated from synthetic iron(II) complexes of neutral tetradentate (TPA) and pentadentate (N4Py, Bn-TPEN) ligands and structurally characterized by means of Fe K-edge X-ray absorption spectroscopy (XAS). Notable features obtained from fits of the EXAFS region are Fe-O bond lengths of 1.78 A for the alkylperoxoiron(III) intermediates and 1.65-1.68 A for the oxoiron(IV) intermediates, reflecting different strengths in the Fe-O pi interactions. These differences are also observed in the intensities of the 1s-to-3d transitions in the XANES region, which increase from 4 units for the nearly octahedral iron(II) precursor to 9-15 units for the alkylperoxoiron(III) intermediates to 25-29 units for the oxoiron(IV) species.

Biomimetic Materials↗
PubMed2004

Fluorescence-based nitric oxide detection by ruthenium porphyrin fluorophore complexes.

The ruthenium(II) porphyrin fluorophore complexes [Ru(TPP)(CO)(Ds-R)] (TPP = tetraphenylporphinato dianion; Ds = dansyl; R = imidazole (im), 1, or thiomorpholine (tm), 2) were synthesized and investigated for their ability to detect nitric oxide (NO) based on fluorescence. The X-ray crystal structures of 1 and 2 were determined. The Ds-im or Ds-tm ligand coordinates to an axial site of the ruthenium(II) center through a nitrogen or sulfur atom, respectively. Both exhibit quenched fluorescence when excited at 368 or 345 nm. Displacement of the metal-coordinated fluorophore by NO restores fluorescence within minutes. These observations demonstrate fluorescence-based NO detection using ruthenium porphyrin fluorophore conjugates.

Crystallography, X-Ray↗
PubMed2004

Dirhodium tetracarboxylate scaffolds as reversible fluorescence-based nitric oxide sensors.

We report the synthesis and characterization of dirhodium tetracarboxylate complexes [Rh(2)(mu-O(2)CR)(4)(L)(2)], with R = Me and L = dansyl-imidazole (Ds-im) or dansyl-piperazine (Ds-pip). The fluorophores coordinate to the axial sites of the dirhodium core through the imidazole or piperazine N-atom and emit only weakly when excited at 365 or 345 nm for the Ds-im and Ds-pip complexes, respectively. These fluorophore-containing complexes were investigated for their ability to elicit a fluorescence response in the presence of NO. An immediate increase in fluorescence emission of greater than 15-fold occurs when NO is admitted to solutions containing [Rh(2)(mu-O(2)CMe)(4)] and Ds-pip or Ds-im. In both systems, the fluorescence response, which arises by NO-induced displacement of the axially coordinated fluorophore, is reversible with a sensitivity of approximately 4 microM. The related dinitrosyl complexes [Rh(2)(mu-O(2)CR)(4)(NO)(2)], where R = Me, Et, or n-Pr, were prepared, structurally characterized, and found to be air-stable, losing NO upon standing in solution. Sequestration of a methylene chloride solution of the Ds-pip complex from aqueous media by a NO-permeable membrane allows for fluorescence detection of NO for potential applications in biological fluids.

Biosensing Techniques↗
PubMed2003

First direct evidence for stereospecific olefin epoxidation and alkane hydroxylation by an oxoiron(IV) porphyrin complex.

We report in this study that an oxoiron(IV) porphyrin complex bearing electron-deficient porphyrin ligand, (TPFPP)FeIV=O (TPFPP = meso-tetrakis(pentafluorophenyl)porphinato dianion), shows reactivities similar to those found in oxoiron(IV) porphyrin pi-cation radicals. In the epoxidation of olefins by the (TPFPP)FeIV=O complex, epoxides were yielded as major products; cyclohexene oxide was the sole product formed in the epoxidation of cyclohexene, and stilbenes were stereospecifically oxidized to the corresponding epoxide products. More striking results were obtained in alkane hydroxylation reactions; the hydroxylation of adamantane afforded a high degree of selectivity for tertiary C-H bonds over secondary C-H bonds, and the hydroxylation of cis-1,2-dimethylcyclohexane yielded a tertiary alcohol product with >99% retention of stereochemistry. The latter result demonstrates that an oxoiron(IV) porphyrin complex hydroxylates alkanes with a high stereospecificity. Isotope labeling studies performed with H218O and 18O2 in the olefin epoxidation and alkane hydroxylation reactions demonstrated that oxygen atoms in oxygenated products derived from the oxoiron(IV) porphyrin complex.

Journal Article↗
PubMed2003

An FeIV=O complex of a tetradentate tripodal nonheme ligand.

The reaction of [Fe(II)(tris(2-pyridylmethyl)amine, TPA)(NCCH(3))(2)](2+) with 1 equiv. peracetic acid in CH(3)CN at -40 degrees C results in the nearly quantitative formation of a pale green intermediate with lambda(max) at 724 nm ( epsilon approximately 300 M(-1).cm(-1)) formulated as [Fe(IV)(O)(TPA)](2+) by a combination of spectroscopic techniques. Its electrospray mass spectrum shows a prominent feature at mz 461, corresponding to the [Fe(IV)(O)(TPA)(ClO(4))](+) ion. The Mössbauer spectra recorded in zero field reveal a doublet with DeltaE(Q) = 0.92(2) mms and delta = 0.01(2) mms; analysis of spectra obtained in strong magnetic fields yields parameters characteristic of S = 1 Fe(IV)O complexes. The presence of an Fe(IV)O unit is also indicated in its Fe K-edge x-ray absorption spectrum by an intense 1-s --> 3-d transition and the requirement for an ON scatterer at 1.67 A to fit the extended x-ray absorption fine structure region. The [Fe(IV)(O)(TPA)](2+) intermediate is stable at -40 degrees C for several days but decays quantitatively on warming to [Fe(2)(mu-O)(mu-OAc)(TPA)(2)](3+). Addition of thioanisole or cyclooctene at -40 degrees C results in the formation of thioanisole oxide (100% yield) or cyclooctene oxide (30% yield), respectively; thus [Fe(IV)(O)(TPA)](2+) is an effective oxygen-atom transfer agent. It is proposed that the Fe(IV)O species derives from OO bond heterolysis of an unobserved Fe(II)(TPA)-acyl peroxide complex. The characterization of [Fe(IV)(O)(TPA)](2+) as having a reactive terminal Fe(IV)O unit in a nonheme ligand environment lends credence to the proposed participation of analogous species in the oxygen activation mechanisms of many mononuclear nonheme iron enzymes.

Drug Stability↗
PubMed2003

Crystallographic and spectroscopic characterization of a nonheme Fe(IV)-O complex.

Following the heme paradigm, it is often proposed that dioxygen activation by nonheme monoiron enzymes involves an iron(IV)=oxo intermediate that is responsible for the substrate oxidation step. Such a transient species has now been obtained from a synthetic complex with a nonheme macrocyclic ligand and characterized spectroscopically. Its high-resolution crystal structure reveals an iron-oxygen bond length of 1.646(3) angstroms, demonstrating that a terminal iron(IV)=oxo unit can exist in a nonporphyrin ligand environment and lending credence to proposed mechanisms of nonheme iron catalysis.

Catalysis↗
PubMed2002

Anionic ligand effect on the nature of epoxidizing intermediates in iron porphyrin complex-catalyzed epoxidation reactions.

We have studied an anionic ligand effect in iron porphyrin complex-catalyzed competitive epoxidations of cis- and trans-stilbenes by various terminal oxidants and found that the ratios of cis- to trans-stilbene oxide products formed in competitive epoxidations were markedly dependent on the ligating nature of the anionic ligands. The ratios of cis- to trans-stilbene oxides obtained in the reactions of Fe(TPP)X (TPP = meso-tetraphenylporphinato dianion and X(-) = anionic ligand) and iodosylbenzene (PhIO) were 14 and 0.9 when the X(-) of Fe(TPP)X was Cl(-) and CF(3)SO(3)(-), respectively. An anionic ligand effect was also observed in the reactions of an electron-deficient iron(III) porphyrin complex containing a number of different anionic ligands, Fe(TPFPP)X [TPFPP = meso-tetrakis(pentafluorophenyl)porphinato dianion and X(-) = anionic ligand], and various terminal oxidants such as PhIO, m-chloroperoxybenzoic acid (m-CPBA), tetrabutylammonium oxone (TBAO), and H(2)O(2). While high ratios of cis- to trans-stilbene oxides were obtained in the reactions of iron porphyrin catalysts containing ligating anionic ligands such as Cl(-) and OAc(-), the ratios of cis- to trans-stilbene oxide were low in the reactions of iron porphyrin complexes containing nonligating or weakly ligating anionic ligands such as SbF(6)(-), CF(3)SO(3)(-), and ClO(4)(-). When the anionic ligand was NO(3)(-), the product ratios were found to depend on terminal oxidants and olefin concentrations. We suggest that the dependence of the product ratios on the anionic ligands of iron(III) porphyrin catalysts is due to the involvement of different reactive species in olefin epoxidation reactions. That is, high-valent iron(IV) oxo porphyrin cation radicals are generated as a reactive species in the reactions of iron porphyrin catalysts containing nonligating or weakly ligating anionic ligands such as SbF(6)(-), CF(3)SO(3)(-), and ClO(4)(-), whereas oxidant-iron(III) porphyrin complexes are the reactive intermediates in the reactions of iron porphyrin catalysts containing ligating anionic ligands such as Cl(-) and OAc(-).

Journal Article↗
PubMed2002

Isolation of an oxomanganese(V) porphyrin intermediate in the reaction of a manganese(III) porphyrin complex and H2O2 in aqueous solution.

The reaction of [Mn(TF(4)TMAP)](CF(3)SO(3))(5) (TF(4)TMAP=meso-tetrakis(2,3,5,6-tetrafluoro-N,N,N-trimethyl-4-aniliniumyl)porphinato dianion) with H(2)O(2) (2 equiv) at pH 10.5 and 0 degrees C yielded an oxomanganese(V) porphyrin complex 1 in aqueous solution, whereas an oxomanganese(IV) porphyrin complex 2 was generated in the reactions of tert-alkyl hydroperoxides such as tert-butyl hydroperoxide and 2-methyl-1-phenyl-2-propyl hydroperoxide. Complex 1 was capable of epoxidizing olefins and exchanging its oxygen with H(2) (18)O, whereas 2 did not epoxidize olefins. From the reactions of [Mn(TF(4)TMAP)](5+) with various oxidants in the pH range 3-11, the O-O bond cleavage of hydroperoxides was found to be sensitive to the hydroperoxide substituent and the pH of the reaction solution. Whereas the O-O bond of hydroperoxides containing an electron-donating tert-alkyl group is cleaved homolytically, an electron-withdrawing substituent such as an acyl group in m-chloroperoxybenzoic acid (m-CPBA) facilitates O-O bond heterolysis. The mechanism of the O-O bond cleavage of H(2)O(2) depends on the pH of the reaction solution: O-O bond homolysis prevails at low pH and O-O bond heterolysis becomes a predominant pathway at high pH. The effect of pH on (18)O incorporation from H(2) (18)O into oxygenated products was examined over a wide pH range, by carrying out the epoxidation of carbamazepine (CBZ) with [Mn(TF(4)TMAP)](5+) and KHSO(5) in buffered H(2) (18)O solutions. A high proportion of (18)O was incorporated into the CBZ-10,11-oxide product at all pH values but this proportion was not affected significantly by the pH of the reaction solution.

Carbamazepine↗