PubMed Health⌕ Search

Biomedical subjects

Michael G Rossmann

Publications and source records attributed to Michael G Rossmann.

At least 55 records · Page 3Linked to original sources
PubMed2004

Design, expression, and purification of a Flaviviridae polymerase using a high-throughput approach to facilitate crystal structure determination.

Bovine viral diarrhea virus (BVDV) nonstructural protein 5B is an RNA-dependent RNA polymerase, essential for viral replication. Initial attempts to crystallize a soluble form of the 695-residue BVDV polymerase did not produce any crystals. Limited proteolysis, homology modeling, and mutagenesis data were used to aid the design of polymerase constructs that might crystallize more readily. Limited proteolysis of the polymerase with trypsin identified a domain boundary within the protein. Homology modeling of the polymerase, based on the structure of hepatitis C virus polymerase, indicated that the two polymerases share a 23% identical "core," although overall sequence identity is low. Eighty-four expression clones of the BVDV polymerase were designed by fine-sampling of chain termini at the boundaries of domain and of active truncated forms of the polymerase. The resulting constructs were expressed in Escherichia coli and purified using high-throughput methods. Soluble truncated proteins were subjected to crystallization trials in a 96-well format, and two of these proteins were successfully crystallized.

Amino Acid Sequence↗
PubMed2004

Discrimination among rhinovirus serotypes for a variant ICAM-1 receptor molecule.

Intercellular adhesion molecule 1 (ICAM-1) is the cellular receptor for the major group of human rhinovirus serotypes, including human rhinovirus 14 (HRV14) and HRV16. A naturally occurring variant of ICAM-1, ICAM-1Kilifi, has altered binding characteristics with respect to different HRV serotypes. HRV14 binds to ICAM-1 only transiently at physiological temperatures but forms a stable complex with ICAM-1Kilifi. Conversely, HRV16 forms a stable complex with ICAM-1 but does not bind to ICAM-1Kilifi. The three-dimensional structures of HRV14 and HRV16, complexed with ICAM-1, and the structure of HRV14, complexed with ICAM-1Kilifi, have been determined by cryoelectron microscopy (cryoEM) image reconstruction to a resolution of approximately 10 angstroms. Structures determined by X-ray crystallography of both viruses and of ICAM-1 were fitted into the cryoEM density maps. The interfaces between the viruses and receptors contain extensive ionic networks. However, the interactions between the viruses and ICAM-1Kilifi contain one less salt bridge than between the viruses and ICAM-1. As HRV16 has fewer overall interactions with ICAM-1 than HRV14, the absence of this charge interaction has a greater impact on the binding of ICAM-1Kilifi to HRV16 than to HRV14.

Amino Acid Sequence↗
PubMed2004

Structural and virological studies of the stages of virus replication that are affected by antirhinovirus compounds.

Pleconaril is a broad-spectrum antirhinovirus and antienterovirus compound that binds into a hydrophobic pocket within viral protein 1, stabilizing the capsid and resulting in the inhibition of cell attachment and RNA uncoating. When crystals of human rhinovirus 16 (HRV16) and HRV14 are incubated with pleconaril, drug occupancy in the binding pocket is lower than when pleconaril is introduced during assembly prior to crystallization. This effect is far more marked in HRV16 than in HRV14 and is more marked with pleconaril than with other compounds. These observations are consistent with virus yield inhibition studies and radiolabeled drug binding studies showing that the antiviral effect of pleconaril against HRV16 is greater on the infectivity of progeny virions than the parent input viruses. These data suggest that drug integration into the binding pocket during assembly, or at some other late stage in virus replication, may contribute to the antiviral activity of capsid binding compounds.

Antiviral Agents↗
PubMed2003

Structural analyses of Phycodnaviridae and Iridoviridae.

The Phycodnaviridae, Iridoviridae and related viruses, with diameters of 1500-2000 A, are formed from large trigonal arrays of hexagonally close-packed capsomers forming the faces of icosahedra [Yan et al. (2000), Nature Struct. Biol. 7, 101-103; Nandhagopal et al. (2002), Proc. Natl Acad. Sci. USA, 99, 14758-14763]. Caspar and Klug predicted that such structures could be assembled from hexameric capsomers [Caspar & Klug (1962), Cold Spring Harbor. Symp. Quant. Biol. 27, 1-24], as was subsequently found in numerous icosahedral viruses. During the course of evolution, some viruses, including the virus families mentioned above, replaced hexameric capsomers with pseudo-hexameric trimers by gene duplication. In large dsDNA icosahedral viruses, the capsomers are organized into 'pentasymmetrons' and 'trisymmetrons'. The interactions between the trimeric capsomers can be divided into three groups, one between similarly oriented trimers and two between oppositely oriented trimers (trimers related by an approximately sixfold rotation). The interactions within a trisymmetron belong to the first class, whereas those between trisymmetrons and within the pentasymmetron are of the other two types. Knowledge of these distances permits a more accurate fitting of the atomic structure of the capsomer into the cryo-electron microscopy (cryoEM) reconstruction of the whole virus. The adoption of pseudo-hexagonal capsomers places these viruses into a subset of the Caspar and Klug surface lattices.

Capsid Proteins↗
PubMed2003

Visualization of membrane protein domains by cryo-electron microscopy of dengue virus.

Improved technology for reconstructing cryo-electron microscopy (cryo-EM) images has now made it possible to determine secondary structural features of membrane proteins in enveloped viruses. The structure of mature dengue virus particles was determined to a resolution of 9.5 A by cryo-EM and image reconstruction techniques, establishing the secondary structural disposition of the 180 envelope (E) and 180 membrane (M) proteins in the lipid envelope. The alpha-helical 'stem' regions of the E molecules, as well as part of the N-terminal section of the M proteins, are buried in the outer leaflet of the viral membrane. The 'anchor' regions of E and the M proteins each form antiparallel E-E and M-M transmembrane alpha-helices, leaving their C termini on the exterior of the viral membrane, consistent with the predicted topology of the unprocessed polyprotein. This is one of only a few determinations of the disposition of transmembrane proteins in situ and shows that the nucleocapsid core and envelope proteins do not have a direct interaction in the mature virus.

Cryoelectron Microscopy↗
PubMed2003

Three-dimensional structure of bacteriophage T4 baseplate.

The baseplate of bacteriophage T4 is a multiprotein molecular machine that controls host cell recognition, attachment, tail sheath contraction and viral DNA ejection. We report here the three-dimensional structure of the baseplate-tail tube complex determined to a resolution of 12 A by cryoelectron microscopy. The baseplate has a six-fold symmetric, dome-like structure approximately 520 A in diameter and approximately 270 A long, assembled around a central hub. A 940 A-long and 96 A-diameter tail tube, coaxial with the hub, is connected to the top of the baseplate. At the center of the dome is a needle-like structure that was previously identified as a cell puncturing device. We have identified the locations of six proteins with known atomic structures, and established the position and shape of several other baseplate proteins. The baseplate structure suggests a mechanism of baseplate triggering and structural transition during the initial stages of T4 infection.

Bacteriophage T4↗
PubMed2003

Structures of immature flavivirus particles.

Structures of prM-containing dengue and yellow fever virus particles were determined to 16 and 25 A resolution, respectively, by cryoelectron microscopy and image reconstruction techniques. The closely similar structures show 60 icosahedrally organized trimeric spikes on the particle surface. Each spike consists of three prM:E heterodimers, where E is an envelope glycoprotein and prM is the precursor to the membrane protein M. The pre-peptide components of the prM proteins in each spike cover the fusion peptides at the distal ends of the E glycoproteins in a manner similar to the organization of the glycoproteins in the alphavirus spikes. Each heterodimer is associated with an E and a prM transmembrane density. These transmembrane densities represent either an EE or prMprM antiparallel coiled coil by which each protein spans the membrane twice, leaving the C-terminus of each protein on the exterior of the viral membrane, consistent with the predicted membrane-spanning domains of the unprocessed polyprotein.

Animals↗
PubMed2003

Structure and location of gene product 8 in the bacteriophage T4 baseplate.

Many bacteriophages, such as T4, T7, RB49, and phi29, have complex, sometimes multilayered, tails that facilitate an almost 100% success rate for the viral particles to infect host cells. In bacteriophage T4, there is a baseplate, which is a multiprotein assembly, at the distal end of the contractile tail. The baseplate communicates to the tail that the phage fibers have attached to the host cell, thereby initiating the infection process. Gene product 8 (gp8), whose amino acid sequence consists of 334 residues, is one of at least 16 different structural proteins that constitute the T4 baseplate and is the sixth baseplate protein whose structure has been determined. A 2.0A resolution X-ray structure of gp8 shows that the two-domain protein forms a dimer, in which each monomer consists of a three-layered beta-sandwich with two loops, each containing an alpha-helix at the opposite sides of the sandwich. The crystals of gp8 were produced in the presence of concentrated chloride and bromide ions, resulting in at least 11 halide-binding sites per monomer. Five halide sites, situated at the N termini of alpha-helices, have a protein environment observed in other halide-containing protein crystal structures. The computer programs EMfit and SITUS were used to determine the positions of six gp8 dimers within the 12A resolution cryo-electron microscopy image reconstruction of the baseplate-tail tube complex. The gp8 dimers were found to be located in the upper part of the baseplate outer rim. About 20% of the gp8 surface is involved in contacts with other baseplate proteins, presumed to be gp6, gp7, and gp10. With the structure determination of gp8, a total of 53% of the volume of the baseplate has now been interpreted in terms of its atomic structure.

Amino Acid Sequence↗
PubMed2003

Structural studies of bacteriophage alpha3 assembly.

Bacteriophage alpha3 is a member of the Microviridae, a family of small, single-stranded, icosahedral phages that include phiX174. These viruses have an ssDNA genome associated with approximately 12 copies of an H pilot protein and 60 copies of a small J DNA-binding protein. The surrounding capsid consists of 60 F coat proteins decorated with 12 pentameric spikes of G protein. Assembly proceeds via a 108S empty procapsid that requires the external D and internal B scaffolding proteins for its formation. The alpha3 "open" procapsid structural intermediate was determined to 15A resolution by cryo-electron microscopy (cryo-EM). Unlike the phiX174 "closed" procapsid and the infectious virion, the alpha3 open procapsid has 30A wide pores at the 3-fold vertices and 20A wide gaps between F pentamers as a result of the disordering of two helices in the F capsid protein. The large pores are probably used for DNA entry and internal scaffolding protein exit during DNA packaging. Portions of the B scaffolding protein are located at the 5-fold axes under the spike and in the hydrophobic pocket on the inner surface of the capsid. Protein B appears to have autoproteolytic activity that cleaves at an Arg-Phe motif and probably facilitates the removal of the protein through the 30A wide pores. The structure of the alpha3 mature virion was solved to 3.5A resolution by X-ray crystallography and was used to interpret the open procapsid cryo-EM structure. The main differences between the alpha3 and phiX174 virion structures are in the spike and the DNA-binding proteins. The alpha3 pentameric spikes have a rotation of 3.5 degrees compared to those of phiX174. The alpha3 DNA-binding protein, which is shorter by 13 amino acid residues at its amino end when compared to the phiX174 J protein, retains its carboxy-terminal-binding site on the internal surface of the capsid protein. The icosahedrally ordered structural component of the ssDNA appears to be substantially increased in alpha3 compared to phiX174, allowing the building of about 10% of the ribose-phosphate backbone.

Amino Acid Sequence↗
PubMed2003

Origins.

Explore the source record for details and available documents.

Crystallography↗
PubMed2003

The tail lysozyme complex of bacteriophage T4.

The tail baseplate of bacteriophage T4 contains a structurally essential, three-domain protein encoded by gene 5 in which the middle domain possesses lysozyme activity. The gene 5 product (gp5) undergoes post-translational cleavage, allowing the resultant N-terminal domain (gp5*) to assemble into the baseplate as a trimer. The lysozyme activity of the undissociated cleaved gp5 is inhibited until infection has been initiated, when the C-terminal portion of the molecule is detached and the rest of the molecule dissociates into monomers. The 3D structure of the undissociated cleaved gp5, complexed with gp27 (another component of the baseplate), shows that it is a cell-puncturing device that functions to penetrate the outer cell membrane and to locally dissolve the periplasmic cell wall.

Bacteriophage T4↗
PubMed2003

Bacteriophage phi29 scaffolding protein gp7 before and after prohead assembly.

Three-dimensional structures of the double-stranded DNA bacteriophage phi29 scaffolding protein (gp7) before and after prohead assembly have been determined at resolutions of 2.2 and 2.8 A, respectively. Both structures are dimers that resemble arrows, with a four-helix bundle composing the arrowhead and a coiled coil forming the tail. The structural resemblance of gp7 to the yeast transcription factor GCN4 suggests a DNA-binding function that was confirmed by native gel electrophoresis. DNA binding to gp7 may have a role in mediating the structural transition from prohead to mature virus and scaffold release. A cryo-EM analysis indicates that gp7 is arranged inside the capsid as a series of concentric shells. The position of the higher density features in these shells correlates with the positions of hexamers in the equatorial region of the capsid, suggesting that gp7 may regulate formation of the prolate head through interactions with these hexamers.

Bacillus Phages↗
PubMed2003

Complexes of poliovirus serotypes with their common cellular receptor, CD155.

Structures of all three poliovirus (PV) serotypes (PV1, PV2, and PV3) complexed with their cellular receptor, PV receptor (PVR or CD155), were determined by cryoelectron microscopy. Both glycosylated and fully deglycosylated CD155 exhibited similar binding sites and orientations in the viral canyon for all three PV serotypes, showing that all three serotypes use a common mechanism for cell entry. Difference maps between the glycosylated and deglycosylated CD155 complexes determined the sites of the carbohydrate moieties that, in turn, helped to verify the position of the receptor relative to the viral surface. The proximity of the CD155 carbohydrate site at Asn105 to the viral surface in the receptor-virus complex suggests that it might interfere with receptor docking, an observation consistent with the properties of mutant CD155. The footprints of CD155 on PV surfaces indicate that the south rim of the canyon dominates the virus-receptor interactions and may correspond to the initial CD155 binding state of the receptor-mediated viral uncoating. In contrast, the interaction of CD155 with the north rim of the canyon, especially the region immediately outside the viral hydrophobic pocket that normally binds a cellular "pocket factor," may be critical for the release of the pocket factor, decreasing the virus stability and hence initiating uncoating. The large area of the CD155 footprint on the PV surface, in comparison with other picornavirus-receptor interactions, could be a potential limitation on the viability of PV escape mutants from antibody neutralization. Many of these are likely to have lost their ability to bind CD155, resulting in there being only three PV serotypes.

Amino Acid Sequence↗
PubMed2002

The structure and evolution of the major capsid protein of a large, lipid-containing DNA virus.

Paramecium bursaria Chlorella virus type 1 (PBCV-1) is a very large, icosahedral virus containing an internal membrane enclosed within a glycoprotein coat consisting of pseudohexagonal arrays of trimeric capsomers. Each capsomer is composed of three molecules of the major capsid protein, Vp54, the 2.0-A resolution structure of which is reported here. Four N-linked and two O-linked glycosylation sites were identified. The N-linked sites are associated with nonstandard amino acid motifs as a result of glycosylation by virus-encoded enzymes. Each monomer of the trimeric structure consists of two eight-stranded, antiparallel beta-barrel, "jelly-roll" domains related by a pseudo-sixfold rotation. The fold of the monomer and the pseudo-sixfold symmetry of the capsomer resembles that of the major coat proteins in the double-stranded DNA bacteriophage PRD1 and the double-stranded DNA human adenoviruses, as well as the viral proteins VP2-VP3 of picornaviruses. The structural similarities among these diverse groups of viruses, whose hosts include bacteria, unicellular eukaryotes, plants, and mammals, make it probable that their capsid proteins have evolved from a common ancestor that had already acquired a pseudo-sixfold organization. The trimeric capsid protein structure was used to produce a quasi-atomic model of the 1,900-A diameter PBCV-1 outer shell, based on fitting of the Vp54 crystal structure into a three-dimensional cryoelectron microscopy image reconstruction of the virus.

Capsid↗
PubMed2002

Structure of decay-accelerating factor bound to echovirus 7: a virus-receptor complex.

Echoviruses are enteroviruses that belong to Picornaviridae. Many echoviruses use decay-accelerating factor (DAF) as their cellular receptor. DAF is a glycosylphosphatidyl inositol-anchored complement regulatory protein found on most cell surfaces. It functions to protect cells from complement attack. The cryo-electron microscopy reconstructions of echovirus 7 complexed with DAF show that the DAF-binding regions are located close to the icosahedral twofold axes, in contrast to other enterovirus complexes where the viral canyon is the receptor binding site. This novel receptor binding position suggests that DAF is important for the attachment of viral particles to host cells, but probably not for initiating viral uncoating, as is the case with canyon-binding receptors. Thus, a different cell entry mechanism must be used for enteroviruses that bind DAF.

CD55 Antigens↗
PubMed2002

Structure of dengue virus: implications for flavivirus organization, maturation, and fusion.

The first structure of a flavivirus has been determined by using a combination of cryoelectron microscopy and fitting of the known structure of glycoprotein E into the electron density map. The virus core, within a lipid bilayer, has a less-ordered structure than the external, icosahedral scaffold of 90 glycoprotein E dimers. The three E monomers per icosahedral asymmetric unit do not have quasiequivalent symmetric environments. Difference maps indicate the location of the small membrane protein M relative to the overlaying scaffold of E dimers. The structure suggests that flaviviruses, and by analogy also alphaviruses, employ a fusion mechanism in which the distal beta barrels of domain II of the glycoprotein E are inserted into the cellular membrane.

Capsid↗