PubMed Health⌕ Search

Biomedical subjects

Michael J Serpe

Publications and source records attributed to Michael J Serpe.

7 recordsLinked to original sources
PubMed2007

In-situ AFM studies of the phase-transition behavior of single thermoresponsive hydrogel particles.

The volume phase transition (VPT) behavior of individual thermally responsive poly(N-isopropylacrylamide-co-acrylic acid) (pNIPAm-co-AAc) hydrogel microparticles was studied by in-situ dynamic mode atomic force microscopy (AFM) and force spectroscopy during heating and cooling cycles. Hydrogel samples were prepared by electrostatic immobilization of microparticles to amine-modified gold surfaces. The AFM studies of particle deswelling were performed by varying the force applied on the particles during imaging as a function of the geometry and material of the AFM probe. Aluminum-coated silicon cantilevers were found to influence substantially the behavior of the particles during the VPT, leading to a significant shape change. Low force impact magnetic excitation of the AFM probe (MAC mode) during dynamic mode measurements resulted in an undisturbed deswelling behavior enabling observation of the expected volume changes of the particles without significant tip-sample interaction. Hence, MAC-mode AFM was determined to be the most suitable technique for in-situ AFM studies on volume and shape changes at single hydrogel particles during VPT. Elasticity measurements performed at single particles at temperatures below and above the VPT revealed a 15-fold increase in the Young's modulus after passing the VPT, indicating the transition from a soft, swollen network to a stiffer, deswollen state.

Acrylamides↗
PubMed2005

Hollow thermoresponsive microgels.

Thermoresponsive poly(N-isopropyl acrylamide) (pNIPAm) microgels possessing a hollow structure have been synthesized from core-shell nanoparticles upon oxidation of the particle core, followed by removal of the produced polymer segments by centrifugation. N,N'-(1,2-dihydroxyethylene)bisacrylamide (DHEA) is used as a cross-linker for preparing the degradable core, whereas N,N'-methylenebis(acrylamide) (BIS) is used as a cross-linker to add a nondegradable pNIPAm shell. Addition of NaIO(4) to a suspension of these particles in water leads to controlled degradation of the particle core by cleavage of the 1,2-glycol bond in DHEA. Fluorescence spectroscopy, UV/Vis spectroscopy, and photon correlation spectroscopy are used to characterize the hollow particles produced.

Acrylamide↗
PubMed2004

Hydrogel microparticles as dynamically tunable microlenses.

Tunable micro-optical elements were prepared by aqueous free-radical polymerization and electrostatic self-assembly techniques. Stimuli-responsive poly(N-isopropylacrylamide-co-acrylic acid) (pNIPAm-AAc) microgels were used as lenses to generate dynamically tunable optical elements. By using optical microscopy to investigate the micrometer-scale dynamics of the self-assembled microlenses, we demonstrate focal length tuning through modulation of the solution pH and/or temperature.

Journal Article↗
PubMed2003

Microlens formation in microgel/gold colloid composite materials via photothermal patterning.

We report on the nature of photothermally patterned regions inside self-assembled hydrogel nanoparticle materials containing coassembled colloidal Au. These composite materials are prepared from approximately 226-nm diameter particles composed of the environmentally responsive polymer, poly(N-isopropylacrylamide) (pNIPAm). Upon centrifugation to achieve a proper volume fraction, these close-packed assemblies display a sharp Bragg diffraction peak in the midvisible region of the spectrum and can be reversibly converted into a nondiffracting glassy material as the temperature is raised above the characteristic phase transition temperature of the polymer. The addition of 16-nm colloidal Au prior to centrifugation allows the homogeneous distribution of metal nanoparticles throughout the close-packed material. Localized heating is then possible upon excitation of the Au plasmon absorption with a frequency doubled Nd:YAG laser (lambda = 532 nm). Such localized heating events lead to patterned regions of ordered crystalline phases inside of bulk glassy phases. We illustrate that the nature of the locally patterned area results in the formation of a microlens due to density/refractive index gradient in the patterned crystalline region. The Gaussian power distribution of the incident beam is thought to be a contributing factor in the microlens formation. Microlens formation is shown by observing interference patterns similar to Newton's rings, which change over time as the region is formed. A true hallmark of the lens is also demonstrated by focusing an image through the patterned structure.

Journal Article↗
PubMedDate not supplied

Doxorubicin uptake and release from microgel thin films.

We report investigations on the thermally regulated uptake and release of the chemotherapeutic drug doxorubicin from microgel thin films. A spin coating, layer-by-layer (scLbL) assembly approach was used to prepare thin films composed of thermoresponsive poly(N-isopropylacrylamide-co-acrylic acid) (pNIPAm-AAc) microgels by alternatively exposing a 3-aminopropyltrimethoxysilane (APTMS) functionalized glass substrate to polyanionic pNIPAm-AAc microgels and polycationic poly(allylamine hydrochloride) (PAH). Using this method, 10, 20, and 30 microgel layer films were constructed with uniform layer buildup, as confirmed by quartz crystal microgravimetry (QCM). The films were subsequently loaded with doxorubicin by cycling the temperature of the film in an aqueous doxorubicin solution between 25 and 50 degrees C. Release characteristics were then examined using UV-vis spectroscopy, which revealed temperature-dependent release properties.

Doxorubicin↗
PubMedDate not supplied

Thermally modulated insulin release from microgel thin films.

We describe investigations of thermally triggered insulin release from poly(N-isopropylacrylamide-co-acrylic acid) microgel thin films prepared by layer-by-layer (LbL) polyelectrolyte assembly. The thermoresponsivity of these films was confirmed using light scattering techniques. Simultaneous monitoring of film collapse and insulin release kinetics shows that deswelling of the films is partially decoupled from macromolecule release and that release is mainly governed by partitioning effects. We hypothesize, however, that film thermoresponsivity plays an important role in that subjection to many thermal cycles enables the embedded peptide to solubilize and subsequently partition through film layers. Direct pulsatile and extended release studies confirm the capability of these films to release bursts of insulin over many cycles, and confirm that the magnitude of the release can be controlled based on film thickness. These insulin-impregnated films are extremely stable with the potential to release constant pulses of peptide for more than 1 month at a time.

Gels↗