PubMed Health⌕ Search

Biomedical subjects

Michael R Buchmeiser

Publications and source records attributed to Michael R Buchmeiser.

18 recordsLinked to original sources
PubMed2006

Glass-fiber reinforced poly(acrylate)-based sorptive materials for the enrichment of organic micropollutants from aqueous samples.

A novel and simple approach to sorptive materials for the extraction of organic compounds from environmental samples is presented. It entails the use of glass fiber fabric strips coated with a customized poly(acrylate) (PA) formulation as extraction medium. Analytes were enriched by means of shaking of the PA strip in the sample and then subsequently thermally desorbed and analyzed by GC-MS. The performance of the sorptive materials was evaluated by the enrichment of compounds with different polarities (phenols, hexachlorobenzene and hexachlorocyclohexanes) from water samples. Parameters that affect the extraction process such as pH, ionic strength of the solvent, mixing mechanism, extraction time and desorption conditions were investigated. The extraction abilities of the PA extraction medium were compared with that of commercially available poly(dimethylsiloxane) (PDMS) Twisters. The results revealed that the new material shows higher affinity for phenolic compounds presumably due to the presence of polar groups. The partition coefficients for the PA strips estimated in this work were up to 15 times higher than for the PDMS Twister, resulting in higher recoveries and lower detection limits. The method was applied for the quantification of the aforementioned compounds in contaminated surface water samples from Bitterfeld (Germany). Using both PA strips and PDMS Twisters, good agreement of the extraction data was achieved.

Dimethylpolysiloxanes↗
PubMed2006

Poly(cyclooctene)-based monolithic columns for capillary high performance liquid chromatography prepared via ring-opening metathesis polymerization.

Monolithic columns for capillary HPLC were prepared via ring-opening metathesis polymerization (ROMP) from cis-cyclooctene (COE), tris(cyclooct-4-enyl-1-oxy)methylsilane (CL) as monomers, 2-propanol and toluene as porogens and RuCl(2)(Py)(2)(IMesH(2))(CHC(6)H(5)) (Py=pyridine, IMesH(2)=1,3-dimesityl-4,5-dihydroimidazolin-2-ylidene) as initiator within the confines of 200 microm i.d. fused silica columns. For evaluation of the novel monolithic capillary HPLC columns, a protein standard consisting of six proteins in the molecular weight range of 5800-66000 g/mol, i.e. ribonuclease A, insulin, albumin, lysozyme, myoglobin and beta-lactoglobulin, was used. Reproducibility of synthesis was checked by determining the relative standard deviation (RSD) in retention times (t(R)), which was found to be in the range of 2.9-3.9% for all analytes. Variations in polymer kinetics were realized by adding different amounts of free pyridine and had a significant influence on the monolith's morphology, the backpressure and retention times. On the contrary, variations in monomer content and COE to CL ratio showed only minor changes on these parameters. Long-term stability of 1000 runs at 50 degrees C showed excellent stability of the columns and no significant alteration in separation performance was observed in combination with slightly decreased retention times (approx. 1.6-7.2% for all analytes).

Chromatography, High Pressure Liquid↗
PubMed2005

Metathesis polymerization-derived monolithic membranes for solid-phase extraction coupled with diffuse reflectance spectroscopy.

Novel monolithic disks were prepared via ring opening metathesis polymerization (ROMP) from norborn-2-ene (NBE), a crosslinker, i.e., 1,4,5,8,8a-hexahydro-1,4,4,5,8, exo, endo-dimethanonaphthalene (DMN-H6) and tris(norborn-5-ene-2-ylmethylenoxy)methylsilane, respectively, 2-propanol and toluene (25:25:41:9, all %, w/w) using RuCl2(PCy3)2(CHPh) (Cy=cyclohexyl) as initiator and triphenylphosphine (PPh3) as modulator. Disks 1-2 mm thick were prepared by polymerization in a mold, disks thinner than 1mm were prepared by impregnation of nylon or other porous filters prior to the polymerization step. These disks were evaluated for the preconcentration of iodine and selected organic solutes from dilute aqueous samples by solid-phase extraction (SPE). Quantitative measurement of the extracted solutes was achieved by diffuse-reflectance spectroscopy (DRS) directly on the surface of the disk.

Bridged Bicyclo Compounds↗
PubMed2005

Evaluation of ring-opening metathesis polymerization (ROMP)-derived monolithic capillary high performance liquid chromatography columns.

Novel monolithic capillary HPLC columns were prepared via ring opening metathesis polymerization (ROMP) within the confines of fused silica columns with 200 microm i.d. using norborn-2-ene (NBE), 1,4,4a,5,8,8a-hexahydro-1,4,5,8, exo, endo-dimethanonaphthalene (DMN-H6) as monomers, 2-propanol and toluene as porogens and RuCl2(PCy3)2(CHPh) as initiator. Using the monolithic capillary HPLC columns, different sets of analytes (i.e. standard systems) were used for the evaluation of the monolithic columns: (i) a protein standard consisting of six proteins in the range of 5000-66 000 g/mol, (ii) an insulin-albumin standard, and (iii) a peptide standard obtained from a tryptic digest of cytochrome C. With these three different standard systems the reproducibility of synthesis in terms of separation performance proved to be 1-2% relative standard deviation in tR. Variation of polymerization parameters had a significant influence on the monolithic morphology and therefore separation efficiency and back pressure. The maximum analytical loading capacity of ROMP-derived monolithic capillary columns for albumin was found to be 30-125 ng, depending on the monomer content. Long-term stability studies showed no alteration in separation performance.

Bridged Bicyclo Compounds↗
PubMed2005

Novel ruthenium-based metathesis catalysts containing electron-withdrawing ligands: synthesis, immobilization, and reactivity.

The syntheses and reactivity of seven different ruthenium-based metathesis catalysts are described. Ru(CF3COO)2(PCy3)(=CH-2-(2-PrO)C6H4) (1), Ru(CF3COO)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (2), and Ru(CF3COO)2(PCy(3))(1,3-dimesityldihydroimidazolin-2-ylidene)(=CHC6H5) (3) were prepared via chlorine exchange by reacting RuCl2(PCy3)2(=CH-2-(2-PrO)C6H4), RuCl2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4), and RuCl2(PCy3)(1,3-dimesityldihydroimidazolin-2-ylidene)(=CHC6H5), respectively, with silver trifluoroacetate (Cy =cyclohexyl). In analogy, Ru(CF3CF2COO)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (4) and Ru(CF3CF2CF2COO)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (5) were prepared from RuCl2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) via reaction with CF3CF2COOAg and CF3CF2CF2COOAg, respectively. Ru(C6F5COO)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (6) and Ru(C6F5O)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (7) were prepared from RuCl2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) via reaction with C6F5COOTl and C6F5OTl, respectively. Supported catalysts Ru(PS-DVB-CH2OOCCF2CF2CF2COO)(CF3COO)(PCy3)(1,3-dimesityldihydroimidazolin-2-ylidene)(=CHC6H5) (8), Ru(PS-DVB-CH2OOCCF2CF2CF2COO)(CF3COO)(PCy3)(=CH-2-(2-PrO)C6H4) (9), and Ru(PS-DVB-CH2OOCCF2CF2CF2COO)(CF3COO)(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (10) were synthesized by reaction of RuCl2(PCy3)(1,3-dimesityldihydroimidazolin-2-ylidene)(=CHC6H5), RuCl2(PCy3)(=CH-2-(2-PrO)C6H4), and RuCl2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4), respectively, with a perfluoroglutaric acid-derivatized poly(styrene-co-divinylbenzene) (PS-DVB) support (silver form). Halogen exchange in PCy3-containing systems had to be carried out in dichloromethane in order to suppress precipitation of AgCl.PCy3. The reactivity of all new catalysts in ring-closing metathesis (RCM) of hindered electron-rich and -poor substrates, respectively, at elevated temperature (45 degrees C) was compared with that of existing systems. Diethyl diallylmalonate (DEDAM, 11), diethyl allyl(2-methylallyl)malonate (12), N,N-diallyl-p-toluenesulfonamide (13), N-benzyl-N-but-1-en-4-ylbut-2-enecarboxylic amide (14), and N-allyl-N-(1-carboxymethyl)but-3-en-1-yl-p-toluenesulfonamide (15) were used as educts. Supported catalysts were prepared with high loadings (2.4, 22.1, and 160 mg of catalyst/g PS-DVB for 8, 9, and 10, respectively). Catalyst 8 showed higher and catalysts 9 and 10 sowed significantly reduced activities in RCM compared to their homogeneous analogues. Thus, with 8, turnover numbers (TONs) up to 4200 were realized in stirred-batch (carousel) RCM experiments. To elucidate the nature of the bound species, catalysts 8-10 were subjected to 13C- and 31P-MAS NMR spectroscopy. These investigations provided evidence for the proposed structures. Leaching of ruthenium into the reaction mixture was low, resulting in ruthenium contents <85 ppb (ng/g) in the final RCM-derived products.

Journal Article↗
PubMed2004

Metathesis polymerization-derived chromatographic supports.

The synthesis and properties of metathesis polymerization-derived supports for solid-phase extraction (SPE), for the on-line extraction of metal ions, ion-chromatography, reversed-phase (RP-) chromatography, and chiral chromatography is described. In addition, the metathesis polymerization-based manufacture and derivatization of monolithic supports and their use in the separation of biomolecules such as oligonucleotides, thiooligonucleotides, double-stranded DNA (dsDNA) and proteins will be summarized. Special consideration will be given to important aspects of polymer chemistry and their relevance to the properties of these new supports.

Chromatography, High Pressure Liquid↗
PubMed2004

Novel metathesis catalysts based on ruthenium 1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidenes: synthesis, structure, immobilization, and catalytic activity.

The synthesis of novel ruthenium-based metathesis catalysts containing the saturated 1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene ligand, that is, [RuCl2(NHC)[=CH-2-(2-PrO)-5-NO(2)-C6H3]] (1) and [Ru(CF3COO)2(NHC)[=CH-2-(2-PrO)-5-NO2-C6H3]] (2) (NHC=1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene) is described. Both catalysts are highly active in ring-closing metathesis (RCM) and ring-opening cross-metathesis (ROCM). Compound 1 shows moderate activity in enyne metathesis. Compound 2 is not applicable to enyne metathesis since it shows high activity in the cyclopolymerization of diethyl dipropargylmalonate (DEDPM). Poly(DEDPM) prepared by the action of 2 consists of 95% five-membered rings, that is, poly(cyclopent-1-enevinylene)s, and 5 % of six-membered rings, that is, poly(cyclohex-1-ene-3-methylidene)s. The polymerization proceeds in a nonliving manner and results in polyenes with broad polydispersities (1.9< or =PDI< or =2.3). Supported analogues of 2 were prepared by immobilization on hydroxymethyl-Merrifield resin and a monolithic support derived from ring-opening-metathesis polymerization (ROMP). Catalyst loadings of 1 and 2.5%, respectively, were obtained. Both supported versions of 2 showed excellent reactivity. With 0.24-2% of the supported catalysts, yields in RCM and ROCM were in the range of 76-100%. Leaching of ruthenium was low and resulted in Ru contaminations of the products of less than 0.000014% (0.14 ppm).

Journal Article↗
PubMed2004

Factors relevant for the ruthenium-benzylidene-catalyzed cyclopolymerization of 1,6-heptadyines.

Fourteen metathesis initiators that had been designed for use in the living polymerization of diethyl dipropargylmalonate (DEDPM), including the Hoveyda catalyst [RuCl(2)(IMesH(2))([double bond]CH-2-(2-PrO)[bond]C(6)H(4))] (1 a), as well as [Ru(CF(3)COO)(2)(IMesH(2))([double bond]CH-2-(2-PrO)[bond]C(6)H(4))] (1 b), [Ru(CF(3)CF(2)COO)(2)(IMesH(2))([double bond]CH-2-(2-PrO)[bond]C(6)H(4))] (1 c), [Ru(CF(3)CF(2)CF(2)COO)(2)(IMesH(2))([double bond]CH-2-(2-PrO)[bond]C(6)H(4))] (1 d), [RuCl(2)(IMesH(2))([double bond]CH-2,4,5-(MeO)(3)[bond]C(6)H(2))] (2 a), [Ru(CF(3)COO)(2)(IMesH(2))([double bond]CH-2,4,5-(MeO)(3)[bond]C(6)H(2))] (2 b), [Ru(CF(3)CF(2)COO)(2)(IMesH(2))([double bond]CH-2,4,5-(MeO)(3)[bond]C(6)H(2))] (2 c), [Ru(CF(3)CF(2)CF(2)COO)(2)(IMesH(2))([double bond]CH-2,4,5-(MeO)(3)[bond]C(6)H(2))] (2 d), [RuCl(2)(IMes)([double bond]CH-2-(2-PrO)[bond]C(6)H(4))] (3 a), [Ru(CF(3)COO)(2)(IMes)([double bond]CH-2-(2-PrO)[bond]C(6)H(4))] (3 b), [RuCl(2)(IMesH(2))([double bond]CH-2-(2-PrO)-5-NO(2)[bond]C(6)H(3))] (4 a), [Ru(CF(3)COO)(2)(IMesH(2))([double bond]CH-2-(2-PrO)-5-NO(2)[bond]C(6)H(3))] (4 b), [Ru(CF(3)CF(2)COO)(2)(IMesH(2))([double bond]CH-2-(2-PrO)-5-NO(2)[bond]C(6)H(3))] (4 c), and [Ru(CF(3)CF(2)CF(2)COO)(2)(IMesH(2))([double bond]CH-2-(2-PrO)-5-NO(2)[bond]C(6)H(3))] (4 d) (IMes=1,3-dimesitylimidazol-2-ylidene; IMesH(2)=1,3-dimesityl-4,5-dihydroimidazol-2-ylidene) were prepared. Living polymerization systems could be generated with DEDPM by careful tuning of the electronic nature and steric placement of the ligands. Although 1 a, 2 a, 3 a, 3 b, and 4 a were inactive in the cyclopolymerization of DEDPM, and initiators 1 b-d did not allow any control over molecular weight, initiators 2 b-d and 4 b-d offered access to class VI living polymerization systems. In particular, compounds 2 b and 4 d were superior. The livingness of the systems was demonstrated by linear plots of M(n) versus the number of equivalents of monomer added (N). For initiators 2 b-d and 4 b-d, values for k(p)/k(i) were in the range of 3-7, while 1 b, 1 c, and 1 d showed a k(p)/k(i) ratio of >1000, 80, and 40, respectively. The use of non-degassed solvents did not affect these measurements and underlined the high stability of these initiators. The effective conjugation length (N(eff)) was calculated from the UV/Vis absorption maximum (lambda(max)). The final ruthenium content in the polymers was determined to be 3 ppm.

Journal Article↗
PubMed2004

1,3-dialkyl- and 1,3-diaryl-3,4,5,6-tetrahydropyrimidin-2-ylidene rhodium(i) and palladium(II) complexes: synthesis, structure, and reactivity.

The synthesis of novel 1,3-diaryl- and 1,3-dialkylpyrimidin-2-ylidene-based N-heterocyclic carbenes (NHCs) and their rhodium(i) and palladium(II) complexes is described. The rhodium compounds bromo(cod)[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene]rhodium (7), bromo(cod)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)rhodium (8) (cod=eta(4)-1,5-cyclooctadiene, mesityl=2,4,6-trimethylphenyl), chloro(cod)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)rhodium (9), and chloro(cod)[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene]rhodium (10) were prepared by reaction of [[Rh(cod)Cl](2)] with lithium tert-butoxide followed by addition of 1,3-dimesityl-3,4,5,6-tetrahydropyrimidinium bromide (3), 1,3-dimesityl-3,4,5,6-tetrahydropyrimidinium tetrafluoroborate (4), 1,3-di-2-propyl-3,4,5,6-tetrahydropyrimidinium bromide (6), and 1,3-di-2-propyl-3,4,5,6-tetrahydropyrimidinium tetrafluoroborate, respectively. Complex 7 crystallizes in the monoclinic space group P2(1)/n, and 8 in the monoclinic space group P2(1). Complexes 9 and 10 were used for the synthesis of the corresponding dicarbonyl complexes dicarbonylchloro(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)rhodium (11), and dicarbonylchloro[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene]rhodium (12). The wavenumbers nu(CO I)/nu(CO II) for 11 and 12 were used as a quantitative measure for the basicity of the NHC ligand. The values of 2062/1976 and 2063/1982 cm(-1), respectively, indicate that the new NHCs are among the most basic cyclic ligands reported so far. Compounds 3 and 6 were additionally converted to the corresponding cationic silver(i) bis-NHC complexes [Ag(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(2)]AgBr(2) (13) and [Ag[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene](2)]AgBr(2) (14), which were subsequently used in transmetalation reactions for the synthesis of the corresponding palladium(II) complexes Pd(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(2) (2+)(Ag(2)Br(2)Cl(4) (4-))(1/2) (15) and Pd[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene)(2)]Cl(2) (16). Complex 15 crystallizes in the monoclinic space group P2(1)/c, and 16 in the monoclinic space group C(2)/c. The catalytic activity of 15 and 16 in Heck-type reactions was studied in detail. Both compounds are highly active in the coupling of aliphatic and aromatic vinyl compounds with aryl bromides and chlorides with turnover numbers (TONs) up to 2000000. Stabilities of 15 and 16 under Heck-couplings conditions were correlated with their molecular structure. Finally, selected kinetic data for these couplings are presented.

Journal Article↗
PubMed2004

Synthesis and reactivity of homogeneous and heterogeneous ruthenium-based metathesis catalysts containing electron-withdrawing ligands.

The synthesis and heterogenization of new Grubbs-Hoveyda type metathesis catalysts by chlorine exchange is described. Substitution of one or two chlorine ligands with trifluoroacetate and trifluoromethanesulfonate was accomplished by reaction of [RuCl(2)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (IMesH(2) = 1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene) with the silver salts CF(3)COOAg and CF(3)SO(3)Ag, respectively. The resulting compounds, [Ru(CF(3)SO(3))(2)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (1), [RuCl(CF(3)SO(3))([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (2), and [Ru(CF(3)CO(2))(2)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (3) were found to be highly active catalysts for ring-closing metathesis (RCM) at elevated temperature (45 degrees C), exceeding known ruthenium-based catalysts in catalytic activity. Turn-over numbers (TONs) up to 1800 were achieved in RCM. Excellent yields were also achieved in enyne metathesis and ring-opening cross metathesis using norborn-5-ene and 7-oxanorborn-5-ene-derivatives. Even more important, 3 was found to be highly active in RCM at room temperature (20 degrees C), allowing TONs up to 1400. Heterogeneous catalysts were synthesized by immobilizing [RuCl(2)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] on a perfluoroglutaric acid derivatized polystyrene-divinylbenzene (PS-DVB) support (silver form). The resulting supported catalyst [RuCl(polymer-CH(2)-O- CO-CF(2)-CF(2)-CF(2)-COO)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (5) showed significantly reduced activities in RCM (TONs = 380) compared with the heterogeneous analogue of 3. The immobilized catalyst, [Ru(polymer-CH(2)-O-CO-CF(2)-CF(2)-CF(2)-COO)(CF(3)CO(2))([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (4) was obtained by substitution of both Cl ligands of the parent Grubbs-Hoveyda catalyst by addition of CF(3)COOAg to 5. Compound 4 can be prepared in high loadings (160 mg catalyst g(-1) PS-DVB) and possesses excellent activity in RCM with TONs up to 1100 in stirred-batch RCM experiments. Leaching of ruthenium into the reaction mixture was unprecedentedly low, resulting in a ruthenium content <70 ppb (ng g(-1)) in the final RCM-derived products.

Journal Article↗
PubMed2003

A ROMP-derived, polymer-supported chiral Schrock catalyst for enantioselective ring-closing olefin metathesis.

A permanently polymer-immobilised version of Schrock's molybdenum catalyst was realised via polymerisation of chiral 5,5'-bis(norborn-5-ene-2-ylmethyleneoxymethyl)-3,3'-di-tert-butyl-6,6'-dimethylbiphen-2,2'-diol followed by reaction with the catalyst precursor Mo(N-2,6-i-Pr2C6H3)(CHCMe2Ph)(OSO2CF3)2(CH3OCH2CH2OCH3); using this 5-, 6- and 7-membered heterocycles were synthesised via ring-closing metathesis (RCM) from (pro-)chiral substrates in high yields and ee with short reaction times; the catalyst shows low loss of molybdenum during RCM, and was easily separated and recycled.

Journal Article↗
PubMed2003

Terpyridine-based silica supports prepared by ring-opening metathesis polymerization for the selective extraction of noble metals.

The synthesis of a terpyridine-based sorbent for solid-phase extraction (SPE) of noble metal ions is described. For this purpose, 4'-(norborn-2-en-5-ylmethylenoxy)terpyridine was copolymerized with norborn-2-ene via Mo(N-2,6-i-Pr2-C6H3)(=CHCMe2Ph) (OC(CH3)(CF3)2)2-catalyzed ring-opening metathesis polymerization (ROMP) to give a poly(norbornene900(-b-4'-(norborn-2-en-5-ylmethylenoxy)terpyridine60) block-copolymer. This block-copolymer was used for the preparation of polymer-coated silica 60 (4.8 wt.% coating), which was investigated for its extraction capabilities for Cr(III), Mn(II), Re(II), Fe(III), Ru(III), Co(II), Rh(III), Ir(III), Ni(II), Pd(II), Pt(II), Cu(II), Ag(I), Au(III), Zn(II), Cd(II) and Hg(II), at different pH. Under competitive conditions and at pH < 0.6, the selectivity order was Pd approximately = Ag approximately = Au approximately = Pt > Re > Ir > Rh > Ru > Fe > Cr approximately = Mn approximately = Cd approximately = Zn. Enhanced selectivity was observed at pH = 3.5, the order was Au > Hg > Pd approximately = Ag > Rh > Pt > Ir approximately = Re > Cu > Co approximately = Zn approximately = Cd approximately = Ni > Cr > Mn. The maximum metal loading that was achieved under non-competitive conditions was > 6 mg/g for Au(III), Hg(II), Pd(II) and Ag(I). Even under competitive conditions, loadings of > 6 mg/g were realized for Au(III) and Hg(II). Quantitative recoveries > 97% were observed for all metals in case loading was stopped before reaching the point of breakthrough.

Magnetic Resonance Spectroscopy↗
PubMed2002

Hydrophobic, pellicular, monolithic capillary columns based on cross-linked polynorbornene for biopolymer separations.

Monolithic capillary columns were prepared by transition metal-catalyzed ring-opening metathesis copolymerization of norborn-2-ene and 1,4,4a,5,8,8a-hexahydro-1,4,5,8-exo,endo-dimethanonaphthalene inside a silanized 200-microm-i.d. fused-silica capillary using a mixture of toluene and 2-propanol as porogen and Cl2(PCy3)2Ru(=CHPh) as initiator. The synthesized columns allowed the rapid and highly efficient separation of single- and double-stranded nucleic acids by ion-pair reversed-phase high-performance liquid chromatography and of proteins by reversed-phase high-performance liquid chromatography. Compared to 3-mm-i.d. analytical columns synthesized from an identical polymerization mixture, a considerable improvement in the peak widths at half-height of oligonucleotides in the order of 60-80% was obtained. Significant differences in morphology between the capillary column, where the surface of the monolith was rather soft and rugulose, and the analytical column, where the surface was very sharp and smooth, were observed, most probably due to differences in polymerization kinetics. The synthesized monoliths were successfully applied to the separation of the diastereomers of phosphorothioate oligodeoxynucleotides. To confirm the identity of the eluting compounds on the basis of their intact molecular masses, the chromatographic separation system was on-line hyphenated to electrospray ionization mass spectrometry.

Biopolymers↗
PubMed2002

Separation of planar chiral ferrocene derivatives on beta-cyclodextrin-based polymer supports prepared via ring-opening metathesis graft-polymerization.

A series of beta-cyclodextrin (beta-CD) based chiral stationary phases (CSPs) were synthesized by ring-opening metathesis graft polymerization of various norborn-2-ene (NBE) substituted CDs. Chiral selectors based on endo/exo-6-O-(norborn-2-ene-5-ylmethoxymethylsilyl)-beta-CD, tris(endo/exo-6-O-norborn-2-ene-5-ylmethoxymethylsilyl)-beta-CD, tetrakis(endolexo-6-0-norborn-2-ene-5-ylmethoxymethylsilyl)-beta-CD, hexakis(endo/exo-6-O-norborn-2-ene-5-ylmethoxymethylsilyl)-beta-CD and tetrakis(endo-6-O-norborn-2-ene-5-carboxyl)-beta-CD were grafted onto Nucleosil 300-5 using well-established grafting procedures. CSPs were investigated for their separation capabilities for a series of the planar chiral ferrocene derivatives, rac-ferroceno[2,3a]inden-1-one (1a, 1b), rac-6-(3-hydroxy-3-methylbut-1-yn-1-yl)ferroceno[2,3a]inden-1-one (2a, 2b), rac-ferrocene[2,3a]indene (3a, 3b), rac-endo 1-methoxy-1-allylferroceno[2,3a]indene (4a, 4b) and rac-1,4-dihydroxybutylferrocene (5a, 5b). Compounds la, lb and 2a, 2b bearing a carbonyl group were successfully separated on these CSPs, while compounds 3-5 do not undergo enantioselective interaction under the conditions applied. General aspects of separation as well as mechanistic implementations are discussed.

Cyclodextrins↗
PubMed2002

Heterogeneous C-C coupling and polymerization catalysts prepared by ROMP.

This contribution summarizes the latest developments in the area of catalytic supports prepared via ring-opening metathesis polymerization (ROMP). In particular, the synthesis of heterogeneous catalytic systems active in Pd-mediated C-C coupling reactions such as Heck, Sonogashira-Hagihara and Suzuki couplings, as well as in ruthenium-mediated olefin metathesis reactions will be summarized. The general concept for the synthesis of these supports will be outlined in detailed.

Alkenes↗
PubMed2002

Micropreparative fractionation of DNA fragments on metathesis-based monoliths: influence of stoichiometry on separation.

Applying Grubbs' first generation benzylidene-type catalyst Cl2Ru(PCy3)2(CHPh) in ring opening metathesis polymerization (ROMP) of norborn-2-ene (NBE) and 1,4,5,8,8a-hexahydro-1,4,5,8, exo, endo-dimethanonapthalene (DMN-H6), various monoliths were prepared within the confines of silanized borosilicate columns (100x3 mm I.D.) and investigated for the micropreparative separation of pBR322 DNA-Hae III restriction fragments ranging in size from 51 to 587 base pairs (bp), as a sample of double-stranded (ds) DNA. The approach to good resolution of dsDNA on monolithic columns entailed the modulation of the polymer morphology in terms of structure and porosity to suit such an analysis. Structural variations were achieved by changing the relative ratios of comonomers (NBE+DMN-H6) at the expense of porogens, and by increasing the DMN-H6 to NBE mass ratio. For dsDNA separations, eluents comprised 0.1 M aqueous triethylammonium acetate, pH 7.0, and acetonitrile. Alternatively, methanol was introduced in this study as a less polar gradient former. In terms of column evaluation, each column prepared was first tested in the separation of 5'-phosphorylated oligodeoxythymidylic acids [p(dT)(12-18)], since good separation of oligodeoxynucleotides indicates the potential liability of the column tested for dsDNA analysis, and vice versa. It was noted that monoliths with combinations of 25:25:40:10, 28:28:35:9, and 30:30:32:8 (as weight% of NBE/DMN-H6/2-propanol/toluene) showed good resolution of p(dT)(12-18). Moreover, they demonstrated good separation of the first 12 fragments (51-267 bp) of the pBR322 DNA-Hae III digest; however, reduced resolution in the separation of the last five highest molecular mass fragments (434-587 bp) was experienced. The best separation of these fragments was accomplished on a 25:25:40:10 NBE/DMN-H6/2-propanol/toluene combination at a flow-rate of 2 ml/min, a temperature of 50 degrees C, and a gradient of 4-10% acetonitrile in 1 min, then 10-16% in 14 min. The total amount of pBR322 HaeIII digest that may be fractionated on these systems is 0.5-2.5 microg.

Chromatography, High Pressure Liquid↗